How to release link an domain blocked?

Hi,
How to release only one video youtube.com domain?
The domain youtube.com is blocked in global policy.
My version is 7.5.0 Web IronPort
Best Regards,
Paulo Araujo
Infrastructure Analyst
Mail:[email protected]
Skype: psibalde

Hello Paulo,
Please follow the instruction below and you will get any single youtube video to work both on the main site and in embeded videos on other sites.
You will need to create a custom category for the youtube allow. Add the following sites into the sections specified.
These sections will allow the advertisements and the control functions to load. Along with letting the site look normal. Advertisements and controls must load for any youtube video to play.
Site: .ytimg.com, ytimg.com, gdata.youtube.com
Regular Expressions:
youtube\.com/get_player
youtube\.com/get_video_info
youtube\.com/videoplayback
youtube\.com/crossdomain\.xml
youtube\.com/generate
Once you have added these sites you will need to determine the video id. This is fairly easy and I have included an example below.
Ex: https://www.youtube.com/watch?v=dQw4w9WgXcQ
You will see a section with random characters. Always comes after video_id, watch?v= or embed?v=. This value will be used for the next section.
In the regex please add the following and replace with the determined video id.
youtube\.com/.*
Good luck. Let me know if anything breaks.
Christian Rahl
Customer Support Engineer
Cisco Web Content Security Appliance
Cisco Technical Assistance Center RTP

Similar Messages

How to release Stock blocked against deleted line items from Sales order.

We have Scenario as follows.
Sales order made for items available in stock. Deleted few lineitems from sales order balance items delivered and invoiced. Sales cycle is complete in all sense.
What we have noticed is when we are creating new sales order / Delivery for deleted items from above Sales order it shows deleted quantity is blocked against old sales order. These line items are no longer
available in old sales order since it is deleted also it is not appearing in open sales order report (VA05).
Overall stock available is same as quantity mentioned in deleted line item.
In MD04 - Sales requirenment transaction it shows sales order / line item against which it is blocked.
i.e deleted line item.
How to release these stock and make available for sales. Any standard process available ? or any other solutions
Thanks & Regards,

I got a solution for my question from other forum. for info
Go to SE38 and enter program SDRQCR21 then execute...
Enter line item which is blocked for sales order in MD04 and enter plant then check Data
transfer box and uncheck other boxes... It will pop up information and click yes...
You will get one report and Stock inconsistency will go off and then check it in MD04....
regards

My newly purhcased Domain Name does not appear in sidebar...how do I link

I have purchased southbaygunnersredondo.com and followed all the steps to link the name with the website I created using iweb. When I look at my me.com account, I see my new domain name listed and ready to use, but it doesn't show up in my sidebar in iweb so I have no idea how to link the domain name with the site I created. help-

Is this the URL?
http://www.southbaygunnersredondo.com/southbaygunnersredondo.com/Welcome.html
Try a shorter Sitename. It's a bit overdone to display it twice.
You do not have to link anything in iWeb.
iWeb gets the domainname from the MMe server and will only use it to create the RSS and subscription links.
You can keep using the web.me.com/username address and the domainname address.

How to Release the blocked Sales orders?

Hi Gurus,
Requirement: To Release the Blocked Salesorders
problem: find out any Tables and procedure to release blocked SO(allow to creating delivery for SO).
how to Customer CreditLimit and Tables of Theses...............
Thanks in Advance..
sivakumar.kasa

Hi..
AS per i knew......
how to know cutomer CreditLimit?
FD32,FD33...tcodes
how to release blocked Sales order?
VKM3
Wait for some other views

How to release blocked GLs e..t.c

Dear All:
I have a query, i encountered this issue when end users complained that posting to certian GLs and Vednors is not possible because they are blocked.Although they were never blocked by me. 15 mints before their complaint SAP was shutdown by BASIS personnels(when END USERS were working on GLs and Vendor). i made sure that everything was ok with these vendors and GLs (no other user using them,shutdown login e.t.c). so please guide me how to release these GLs and Vendors.
Regards
Cross-post

Hi
As mentioned by you SAP System was shutdown and users compalined that for certain GL's and Vendors they are unable to post.
Actually when SAP System is UP. then automatically it should have become active, ie able to post.
Tell your BASIS guy to apply the relevant Patches.
Or you check this way
GL Master -->Open the GL Master, select the Block and check whether the checkbox's are SELECTED, if they are selected then DESELECT them and save.
Vendor Master -->Open the Vendor Master in Change mode (XK02) and Go to menu , Extras -->Blocked data. If the CheckBox's are SELECTED, then DESELECT all the checkbox's and save.
Regards
Venkat
Edited by: Venkat Dara on Jun 9, 2010 1:30 PM

Error while releasing PO : System error: block object EKKO, Key PO Number.

Dear All,
I am getting error while releasing PO : System error: block object EKKO, Key PO Number.
Please help to resolve.

Hi Friend,
How the issue is resolved, because i am facing the same issue, while positing Service entry sheet.
If you can give us solution, it will be more useful and more appreciated
REgards
RS

How to install an additional domain in JCaps 6?!

Hi again,
did not take a long time until I reached the next problem that blocks my testing...
Now I want to install an additional domain, aside from the standard "domain1" that was created during install. I took a look in the installation guide and found out that I have to manually adapt the "install.properties"-file under \appserver\addons\caps - here is my changed file:
# ----- Domain configuration --------------------------------------------------
# This defines where to install and deploy components to, and how to connect
# to the server to do so.
# The name of the domain
caps.domain.name=domainCommonProjects
# The admin http or https port
caps.admin.port=18000
# Username
caps.admin.user=Administrator
# Change this to true if the admin port is using https instead of http
caps.admin.secure=false
# The name of the server
caps.target=serverCommonProjects
# Optional: name of a cluster target
caps.cluster.target=
# Optional: specify the path to the password file here. This will be used to
# connect to the server to deploy and configure components. If no file is
# specified, the credentials as listed below will be used.
caps.override.password.file=
# If no password file is specified, the following credentials will be used
AS_ADMIN_PASSWORD=STC
AS_ADMIN_MASTERPASSWORD=STC
# ----- UDDI ------------------------------------------------------------------
# If the UDDI .war files need to be deployed, change this to true
caps.uddi.install=false
# ----- STCMS -----------------------------------------------------------------
# If STCMS needs to be installed, change this to true
caps.stcms.install=true
# If STCMS is being installed, the platform needs to be specified. This is
# because STCMS contains native binaries. Valid values are below
caps.stcms.os=win32
# Uncomment out the line above for:
# - Windows XP(SP2) (32-bit), Windows 2000(SP4) (32-bit),
# - Windows 2003(R2 SP2) (32-bit), Windows 2003 (EE R2 SP2) (64-bit)
# - Windows Vista Business (32-bit)When I run the ant-command then, I always get the following error:
E:\JavaCAPS6\appserver\bin>asant -f ..\addons\caps\install.xml
Buildfile: ..\addons\caps\install.xml
install:
install:
[copy] Copying 1 file to E:\JavaCAPS6\appserver\domains\domainCommonProject
s\lib
[sun-appserv-admin] Executing: list-lifecycle-modules --port 19000 --host localh
ost --passwordfile "E:\JavaCAPS6\appserver\addons\caps\install.properties" --us
er Administrator serverCommonProjects
BUILD FAILED
E:\JavaCAPS6\appserver\addons\caps\install.xml:86: The following error occurred
while executing this line:
E:\JavaCAPS6\appserver\addons\caps\applicationVerifier\server-init.xml:41: An ex
ception occurred while running the command. The exception message is: CLI137 Co
mmand list-lifecycle-modules failed..
Total time: 2 secondsAny ideas what I am doing wrong here?!
Btw - when I want to delete the initally created domain1, how do I do that?! Is it enough to delete the domain1-directory under "domains" in the appserver?!
Thanks for all your hints...
Regards
Bernhard

OK - I found out myself what the problem was!
First - here is a great blog about how to create a new domain in JCaps 6:
[http://blogs.sun.com/polyblog/entry/creating_a_new_caps_6]
Second - what you still have to do is to adapt your install.xml file also (not only the install.properties), to set your correct values concerning domainName and port!
Regards
Bernhard

How to unblock bbm pin from block list

How to unblock bbm pin from block list, i deleyed a bbm pin and close option for no block that pin, now how can i unblock that pin.

How did you block the plugin?
If you blocked it via Firefox and not via an extension then you should see a Lego block icon on the left end of the location bar that you can click.
You can inspect and manage the permissions for the domain in the currently selected tab via these steps:
*Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
*Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
If you blocked content via an extension like Adblock Plus then you need to click its toolbar icon to check what content is being blocked.

How different fields linked with Application Utilities Lookups

Hi,
I need to know how different fields at different forms are linked with utilities lookups and pick the values(meaning)?
For example #1;
at Organization form, Type of organization is must to define, value of Type comes from Utilities lookups. Type field name is ORGANIZATION_TYPE (Help ---Diagonestics --- Examine), if we try to search the ORGANIZATION_TYPE in utilities lookups we will not find it, we will find if we enter in front of type ORG_TYPE and search then system displays all the codes and meanings defined in the system.
#2;
at People -- Additional Information form, Nationality is defined which is picked up from utilities lookups. Nationality field name is LOC_ITEM08 (Help ---Diagonestics --- Examine), if we try to search the LOC_ITEM08 in utilities lookups we will not find it, we will find if we enter in front of type NATIONALITY and search then system displays all the codes and meanings defined in the system for different nationalities.
my question, what's the relationship b/w
ORGANIZATION_TYPE to ORG_TYPE
LOC_ITEM08 to NATIONALITY
I hope that my question is simple and you guys understand it. Please reply soon.
Regards,

Hi
There is no link between the block/field name you see in help->examine and the application utilities lookup type. I'm afraid this is just something you have to learn as you go!
Regards
Tim

Display:block not showing anchor link as a block in IE9

The display:block CSS code is making the anchor link inside a div, i.e.
<div><a>some text</a></div>
behave as a block in a site viewed in Chrome etc.
However, it is not behaving like a block in IE9. Instead of the whole width of div which should behave like a block and be clickable, only the actual text of anchor link <a> is clickable.
Please advise on how to ensure the whole div behaves like a block in IE9 also.

I checked and found that the probable problem is as described below.
I have indicated the style for a.link and a.visited in the starting of the css file as
a:link { color:#009900; text-decoration: underline;}
a:visited { color: #4E5869; text-decoration: underline;}
Later in the css file, I have defined styles for cbt, cbt a, cbt a:link and cbt a:visited separately. the styles for cbt etc is as below:
cbt { display:block; float:none;
position: relative;
margin:5px 2px;
padding-left:1px;
padding-right:1px;
padding-top:5px;
padding-bottom:5px;
z-index:4;
clear:both; }
cbt a, cbt a:link { font-size: 1em;
text-decoration:none; text-align:justify;
text-justify:inter-word;
font-weight:normal;
word-wrap:break-word;
color:#00C; display:block; }
cbt a:visited { color:#CC0033; }
The anchor link a is nested inside cbt tag in the html file as
<cbt><a href="abc.com">some text</a></cbt>
Inspite of the above codes, the anchor link a inside cbt tag is not taking the styles defined with cbt a, cbt a:link, but is instead taking styles defined in a:link initially.
Hence they are behaving as inline elements in IE9 when hosted on remote server by taking the initial style defined.
However,when the same page are viewed on localhost in IE9, the links behave as block elements (taking the later defined styles). The links also behave as block elements inside Chrome browser when viewed on localhost as well as on remote server. In this situation the links are taking the styles defined later in the css file.
Please advise on why the css behaviour is so erratic.

How to release the task and Transport

Hi can anybody tell me the steps , how to release the task and how to relase the Transport into Quality.
Thanks in advance.
kp

Hi,
Go to SE09..
Give your user name..Press enter..It will display all the CRs..
Place the cursor on the task of the CR you want to release..
Press the transport button (F9)..
Do the same for all the tasks..
Then place cursor on the CR..
Press the transport button (F9).
Now the CR is released...
You can basis team to import the CR to quality system using the transaction STMS.
Check this link for using the STMS
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a3c57acc11d1899e0000e829fbbd/content.htm
Thanks,
Naren

Does anyone know how or if even possible to block stations and limit content on iTunes Radio?

Does anyone know how or if even possible to block stations and limit content on iTunes Radio? I have younger children listening to inappropriate music. I have the iPad locked down but that doesn't seem to help.

Thank you for your response! I just don't want to spend more time on beautifying the libsyn page via hours of dumpster diving for code hence reaching out on here about iWeb (even if it's sadly been put out to pasture). This was the response that I got from Libsyn about this:
Hello,
Thanks for contacting us. Just to clarify, our system's blog page templates are basic 'starting points' -- we're working now to improve our basic blog page templates to make more options available to Libsyn users.
You might be able to use your Libsyn show's RSS feed to generate content on an iWeb page. You could do a Google search for 'convert RSS to HTML' to learn more. Here's a link for more info about generating HTML content from an RSS feed source:
http://www.blogtips.org/free-rss-tools/
We appreciate your feedback and suggestions. Please let us know if you have any questions.
Any thoughts? Btw, if it possible to 'view source code' for an iWeb page that's created or to take html code and plaster it into an iWeb page? If that's possible then I might be able to use iWeb for Libsyn.

(261680070) Q WWO-13 How can I link workshop to a different WLS instance?

Q<WWO-13> How can I link workshop to a different WLS instance?
A<WWO-13> Use the Workshop menus. Select the Tools menu, then choose Preferences.
Select the Paths tab and then specify the domain and server that you wish to connect
to.

Additional Information supplied by John Methot:
Unfortunately, that's not all there is to it. You also have to make sure
both the Workshop IDE and the WLS instance are looking at the same project
filesystem. This means you have to share the filesystem from the WLS
machine (typically) and mount it (or, in windows, map it) on the IDE
machine. Specifically, you want to share/mount/map the directory that is
the parent of the domain directory (so, be default,
c:\bea\weblogic700\samples). Then, in the preferences dialog, you have set
the "config directory path" that that mount point and then select the domain
("workshop"). Now you're set.
If you don't do this, things might sort of seem to work but won't. You'll
be editing happily away on the IDE machine, but running unmodified files on
the WLS machine (the real files).
Bottom line: there is no file transfer feature between the two machine in a
remote configuration. Both machines have to see the same file system.
"Adam FitzGerald" <[email protected]> wrote:
>
Q<WWO-13> How can I link workshop to a different WLS instance?
A<WWO-13> Use the Workshop menus. Select the Tools menu, then choose Preferences.
Select the Paths tab and then specify the domain and server that you wish
to connect
to.

Release the sales order block

Hi, All ! plz any body can give me reply how to release the sales order once if we blocked.

hi
VA14L - Sales Documents Blocked for Delivery
V23 - Sales Documents Blocked for Billing
V.25 - Release Customer Expected Price
VKM3 Credit Block remove
V.26 - Sales Documents By Object Status for status change
Regards
Virandra Sharda

HOW TO RELEASE BAPI

Hi Dear all
I get a problem regarding bapi,how to release bapi,
I am getting error "OBJECT TYPE SHOULD BE TRANSPORTABLE"
how to make bapi transportable.
Thanx in advance
Regards
Poonam

hi,
Refer to the follwoing link....
http://www.sap-img.com/abap/bapi-step-by-step-guidance.htm

How to release link an domain blocked?

Similar Messages

Maybe you are looking for