How to release the task and Transport

Hi can anybody tell me the steps , how to release the task and how to relase the Transport into Quality.
Thanks in advance.
kp

Hi,
Go to SE09..
Give your user name..Press enter..It will display all the CRs..
Place the cursor on the task of the CR you want to release..
Press the transport button (F9)..
Do the same for all the tasks..
Then place cursor on the CR..
Press the transport button (F9).
Now the CR is released...
You can basis team to import the CR to quality system using the transaction STMS.
Check this link for using the STMS
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a3c57acc11d1899e0000e829fbbd/content.htm
Thanks,
Naren

Similar Messages

How to release the prompt and how to stop JVM afterwords

There are 2 related questions here:
(1st) I have a Java class that I'd like to start and release the command prompt. In Linux, I usually start it this way:
> java MyClass &
But in Windows I can't do that, it always holds the command prompt open. If I try this way:
> javaw MyClass
it works, but if I call it from inside a batch file, it opens a command prompt (then I can close the command prompt and it remains in memory). But I'd like it not to open any command prompt. Does anyone know a way?
(2nd) I'd like to start the class above like we do for some services... I thought of doing somethind like this:
> java MyClass -start
This, after solving the (1st) question, looks easy. The problem is: how to implement this class in order to be able to call
> java MyClass -stop
to stop it, finishing its JVM? How will this class be able to detect an instance of itself in memory and stop it??? Is there something simpler than using sockets for that purpose?
Thanks for your help, friends!

Well, the first is easy - instead of starting with java.exe, use javaw.exe. No more icky command prompt. ;-)
The second one is trickier. If you really want to go that route, I'd suggest looking at the Tomcat bootstrap code - it listens on a specific port for program handling commands.

How to release the Change request (Task in Repair Mode)

Hello everybody,
I have change request in that one Task in Repair mode.
when i trying to release, it give the error message like
Repair HRDK900911 may only contain repaired objects
Diagnosis
In repairs, you can only lock and edit those objects whose original exists in another SAP System.
The object R3TR PROG /VWK/GPS_VCD_R was found in the object list of your repair HRDK900911. This object is not a copy but the original.
So please suggest me
How to release the Task (Repair) so I can release the request.
Thanks

Yes you wont be able to release the request till you remove the flag from SE03.
Goto SE03 > Display Repaired Objects
Select Your object and remove the repair flag from top <Repair Flag>
R3TR PROG <Your Object>
Also as you are getting an error
No valid change license available for namespace
In SE03-->Display/change Namespace
when I check the specified Namespace then their is no Repair License.
So please suggest me Repair License is required?
check what namespace it is refrerring to ... A namespace name should be there....
1. Go to SE06 and click on the System Change Option.
2. Verify that Namespace Systems Development /Namespace/ is "Modifiable".
or
1. Run transaction SM30
2. Enter V_TRNSPACE
2. Click Maintain
3. Double Click on Namespace /NAMESPACE/
4. Change Namespace role from P to C, then hit Save
All the best !
Edited by: prateek_y on Aug 30, 2010 3:21 PM

How to release the transport request

Some one please help me here on better understanding on how transport
are maintained and what steps should be taken before releasing it.
I know we can see the list in se so that will not be the answer of my
question need proper explanation on that please I will be highly obliged.
thank you
Bushan

Hi
Initially when a config request is raised...the settings are saved under a Request number. Every request is associated with a task under it.
Release the task first (select the task and press F9)and then release the request(select the request and press F9). The objects will be no longer locked then and are free to be moved.
Be careful while releasing the task. See the tables effected(if you expand task u can see). If you feel some unconnected table is included better a careful consideration be given while moving the request.
When you release the task...the system may prompt you to enter text..that is nothing but the identification/explanation of your activity. You can record the same.
Hope im clear
Regards
A
Message was edited by:
A.Aravind

Can give me the details how to release the transport request to the qa

can give me the details how to release the transport request to the quality server pr production server
thanks

Hi,
Use transaction SE09. Here select "modifiable" .Then click -Display.
Now you get a list of all requests which can be released.
Locate your request number and drill down. Release the sub-request first and then the main request by selecting and using the "transport" icon.
Muraleedharan.R
091 9880028904

How to hide the Print and Export button in analytics report or tasks pane

Hi Experts,
In BIEE 11g,
How to hide the Print and Export button in analytics report or tasks pane ?
For example:
In console,I have created one userA which is belong to BIConsumer GROUP , when I make use of the highest user 'weblogic' to create one simple report, then the userA will login the analytivs to view this report (not dashboard), it will show the print and export as below.So customers do not want to give him the privilege for printing and exporting.
In addtion, go to catalog->tasks(left corner), it will also show the print and export button. So how to hide or not access these button?
Note: Maybe it can use the policy for consumer role for implementing this requirement, but I do not know how to modify the policy. Are you facing the problem? Thanks.

Hi,
1. Create seperate folder for Reports & Dashobard.
2. For BI_Consumer (userA) set the catalog permission to view Dashboard Folder only and remove permission on the Report Folder (you can give traverse permission but don't give Open permision).
3. By this user won't be able to open or run any reports in that folder and the only way he can see the reports is through Dashboard and on dashboard the export and print buttone can be removed very easily.
Mark helpful if it helps.
Regards,
Kashi
Edited by: K N Yadav on 24 May, 2013 1:51 AM

How to find the source and target systems of an imported Transport Request?

Hello,
How to find the source and target systems of an imported Transport Request?
chinna.

Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok

Issue while perform the Task and Data Audit in Workspace

Hi All,
When we try to perform the task and data audit functions in workspace it throws the following error please advise how to fix this issue.
An error has occurred. Please contact your administrator.
Show Details:
Error Reference Number: {110FD8BF-AD33-4257-BA3D-46FF30208EA2};User Name: admin@Native Directory
Num: 0x80040e31;Type: 1;DTime: 6/24/2010 3:42:55 AM;Svr: USNSAP03EX;File: CHsvSystemActivity.cpp;Line: 479;Ver: 11.1.1.2.0.2207;DStr: Timeout expired;
Num: 0x80004005;Type: 0;DTime: 6/24/2010 3:42:55 AM;Svr: USNSAP03EX;File: SystemInfoUsersActivities.cpp;Line: 617;Ver: 11.1.1.2.0.2207;
Num: 0x80004005;Type: 0;DTime: 6/24/2010 3:42:55 AM;Svr: USNSAP03EX;File: CHsvSystemInfo.cpp;Line: 2664;Ver: 11.1.1.2.0.2207;
Num: 0x80004005;Type: 0;DTime: 6/24/2010 3:42:55 AM;Svr: USNSAP03EX;File: CHFMwSystemInfo.cpp;Line: 1846;Ver: 11.1.1.2.0.2207;
Thanks in advance,

If you have any SELECT FOR UPDATE in your code, these will produce locks, and it will not be released until the session which has locked the record has released it. This can be one reason why you have this behavior.
you need to trail your code if it's explicitly locking a row or more.
Tony

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

How to club the downpayment and periodic billing scenario in Sales Order

Hi experts,
Could you please let me know how to club the downpayment and periodic billing scenario in Sales Order.
Requirement is : If you have 10 lacs total amount and out of that 50% should be the downpayment and rest of the amount should be distributed among three equated instalments for 2 months each (periodic billing). This should work with one line item in sales order. Pls provide relevant inputs how to work out this scenario.
Your help would be appreciable.
regards....Diwakaran

Hi Yang,
Workflow is the best approach for any issue related to business objects.
Since you want call FM BAPI_SALESORDER_CHANGE, it will change SO. It means everytime any SO is changed there will an event being triggered.
object type: BUS2032
event: Changed
simple solution:
1. Please create object type (SWO1) and its super type should be BUS2032.
2. Add your own method and attach your custom FM which actually updates the qty & PR)
3. Create Task (PFTC_INS)
in basic data:
- provide object type which you have created
- provide method which you have added
goto triggering events tab
- Choose Object Category as BOR object type
- provide object type (better give BUS2032)
- provide event as CHANGED
Please have look into very nice video blog which helps you to create your workflow.
blog: [Creating your first SAP Business Workflow]
Regards,
Sukhbold Altanbat.

How to change the font and colour of the PL/SQL Editor in forms

Hi All,
I am fed of viewing the small fonts in the PL/SQL Editor. I am feeling stress
in my eyes daily...Please any body help me how to change the color and font
of the PL./SQL editor in oracle forms 6i..Thanks in Advance...

Hi
Thanks for the reply..
But I personally feel that Oracle people should have done this since
any editor should allow us to change the font and colour...any way lets
hope that in the future releases that may happen...
Raghu

How to release the budget in SAP Funds Management

Hi
How to release the budget in SAP Funds Management. Please let me know the proceedure and the transaction code
Tks

Hi,
The answer depends on if you are using Former Budgeting or BCS.
1) If you are using Former Budgeting:
a. You should use transaction FR51 to enter Release or FR55 to distribute it.
2) If you are using BCS:
a. Within FMBBC transaction you have the option to release the budget, use document type as REL (release).
b. You can activate the automatic release for each budget profile in Customizing of Funds Management Government. To do this, in IMG select Funds Management Government ® Budgeting and Availability Control (Former Budgeting) ® Budget Profiles (Former Budgeting) ® Set Up Budget Profiles.
With the automatic release, the corresponding background releases for expenditures FM account assignments with budget transfers are also posted. Take note that the maximum amount that this automated release can transfer from the sender is the amount that has already been released.
If you do not activate the automated release, the maximum amount that can be transferred from the sender is that which has not yet been released.
c. You can use the mass transaction for release, which is FMMPRELE.
I hope that this answer your inquiry.
Best Regards,
Vanessa Barth.

How to configure the runtime and consolidation for a track in CMS.

How to configure the runtime and consolidation for a track in CMS.
I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
Please advise , what are these required for. And how can we configure the same.

The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
Hope it helps..
Regards,
Shikhil

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and that

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff .
I received an email stating that Adobe could not release the payment and that I should validate the method of payment , tried to insert another card number but the system does not accept the security VAT reporting error message. How do I validate my license with association staff and confirm the payment card?

Hi Daniel,
For any sort of payment related matter, kindly contact our support team via: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
If you are unable to use chat option kindly try below mentioned steps.
Try different browser.
Delete cookies and cache
If you are still not able to chat, Kindly reply with the below mentioned information.
OS version:
Browser Version:
You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Thanks,
Atul Saini

How to change the Task title on runtime?

Hi experts again,
My customer is struggling with something very simple: how to customize the Task title. You can certainly create an argument in the task, use Data Associations to map the argument, and then use XPath expression to get the value from the task payload and set it to the task title. That works fine. But it only executes once, when the process instance 'enters' in the task.
So once the Task is created, you can see the custom title in the Workspace.
Now, can we change the Title on runtime? I thought you could get the task payload, update the title and finally update the task but this does not seem to work. Here's the code that does it.
In this example, the priority is updated successfully but not the title.
FacesContext context = FacesContext.getCurrentInstance();
String tskId = (String)context.getApplication().evaluateExpressionGet(context,
"#{pageFlowScope.bpmWorklistTaskId}", String.class);
IWorkflowServiceClient workflowSvcClient = WorkflowService.getWorkflowServiceClient();
ITaskService taskSvc = workflowSvcClient .getTaskService();
ITaskQueryService wfQueryService = workflowSvcClient.getTaskQueryService();
IWorkflowContext wfContext = WorklistUtil.getWorkflowContextForASelectedTask();
Task myTask;
try {
myTask = wfQueryService.getTaskDetailsById(wfContext, tskId);
Element payloadElem = myTask.getPayloadAsElement();
System.out.println("****************" + myTask.getTitle());
System.out.println("****************" + myTask.getPriority());
myTask.setTitle("Task Title 3");
myTask.setPriority(2);
myTask.setPayloadAsElement(payloadElem);
taskSvc.updateTask(wfContext, myTask);
} catch (Exception e) {
e.printStackTrace();
The results which printed out in console after execute above code twice.
****************Task Title 1
****************3
****************Task Title 1
****************2

You can use the appropriately named Window Title property. In your project you can define conditional disable symbols (right-click on the project node and select Properties) and then use a conditional disable structure in your code. However, these symbols apply to the entire project, not to a specific executable. Thus, a better route would be to use the executable name (also accessible via a property), if possible, or some other distinction between the executables. What makes the executables different?

How to release the task and Transport

Similar Messages

Maybe you are looking for