How to Remove a record from PER_ALL_PEOPLE_F
Dear All,
I want to remove a record from per_all_people_f, the employee record exist in the table but not shown on the people screen. Do I need to use any API for that or simple SQL command?
Please help asap.
Regard.
Hi,
What responsibility have you logged in as ?
Is the security profile attached to that responsibility properly defined so that all employees can be viewed ?
Does the record in the table show an end-date of 31-dec-4712 ?
If the data in the table is fine, then it has to be an issue with security of the responsibility.
Cheers,
Vignesh
Similar Messages
-
How to remove duplicates records from output ?
how to remove duplicates records from output ? i used delete adjacent but duplicates records are coming again ..suggest me
hi shruthi,
thanks for ur answer ..but duplicates records coming again
here is my code >> plz check it out
*& Report ZCRM_TROUBLE_TICKET
REPORT zcrm_trouble_ticket.
TYPES : BEGIN OF ty_qmih,
qmnum TYPE qmnum,
equnr TYPE equnr,
iloan TYPE iloan,
ausvn TYPE ausvn,
ausbs TYPE ausbs,
auztv TYPE auztv,
auztb TYPE auztb,
iwerk TYPE iwerk,
END OF ty_qmih,
BEGIN OF ty_qmel,
qmnum TYPE qmnum,
qmtxt TYPE qmtxt,
indtx TYPE indltx,
priok TYPE priok,
strmn TYPE strmn,
strur TYPE strur,
ltrmn TYPE ltrmn,
ltrur TYPE ltrur,
objnr TYPE qmobjnr,
arbpl TYPE lgwid,
vkorg TYPE vkorg,
vtweg TYPE vtweg,
spart TYPE spart,
END OF ty_qmel,
BEGIN OF ty_ihpa,
parnr TYPE i_parnr,
parvw TYPE parvw,
objnr TYPE qmobjnr,
END OF ty_ihpa,
BEGIN OF ty_crhd,
arbpl TYPE arbpl,
objid TYPE cr_objid,
END OF ty_crhd,
BEGIN OF ty_crtx,
ktext TYPE cr_ktext,
objid TYPE cr_objid,
END OF ty_crtx,
BEGIN OF ty_qmfe,
fecod TYPE fecod,
fegrp TYPE fegrp,
qmnum TYPE qmnum,
END OF ty_qmfe,
BEGIN OF ty_qmur,
urcod TYPE urcod,
urgrp TYPE urgrp,
urtxt TYPE urstx,
qmnum TYPE qmnum,
END OF ty_qmur,
BEGIN OF ty_iloa,
tplnr TYPE tplnr,
iloan TYPE iloan,
END OF ty_iloa,
BEGIN OF ty_output,
qmnum TYPE qmnum,
equnr TYPE equnr,
iloan TYPE iloan,
ausvn TYPE ausvn,
ausbs TYPE ausbs,
auztv TYPE auztv,
auztb TYPE auztb,
iwerk TYPE iwerk,
qmtxt TYPE qmtxt,
indtx TYPE indltx,
priok TYPE priok,
strmn TYPE strmn,
strur TYPE strur,
ltrmn TYPE ltrmn,
ltrur TYPE ltrur,
objnr TYPE qmobjnr,
arbpl TYPE lgwid,
vkorg TYPE vkorg,
vtweg TYPE vtweg,
spart TYPE spart,
parnr TYPE i_parnr,
parvw TYPE parvw,
arbpl TYPE arbpl,
objid TYPE cr_objid,
arbpl1 TYPE arbpl,
ktext TYPE cr_ktext,
fecod TYPE fecod,
fegrp TYPE fegrp,
urcod TYPE urcod,
urgrp TYPE urgrp,
urtxt TYPE urstx,
tplnr TYPE tplnr,
END OF ty_output.
DATA : it_qmih TYPE STANDARD TABLE OF ty_qmih,
it_qmel TYPE STANDARD TABLE OF ty_qmel,
it_ihpa TYPE STANDARD TABLE OF ty_ihpa,
it_crhd TYPE STANDARD TABLE OF ty_crhd,
it_crtx TYPE STANDARD TABLE OF ty_crtx,
it_qmfe TYPE STANDARD TABLE OF ty_qmfe,
it_qmur TYPE STANDARD TABLE OF ty_qmur,
it_iloa TYPE STANDARD TABLE OF ty_iloa,
it_output TYPE STANDARD TABLE OF ty_output,
wa_qmih TYPE ty_qmih,
wa_qmel TYPE ty_qmel,
wa_ihpa TYPE ty_ihpa,
wa_crhd TYPE ty_crhd,
wa_crtx TYPE ty_crtx,
wa_qmfe TYPE ty_qmfe,
wa_qmur TYPE ty_qmur,
wa_iloa TYPE ty_iloa,
wa_output TYPE ty_output.
INITIALIZATION.
REFRESH : it_qmih,
it_qmel,
it_ihpa,
it_crhd,
it_crtx,
it_qmfe,
it_qmur,
it_iloa,
it_output.
CLEAR: wa_qmih,
wa_qmel,
wa_ihpa,
wa_crhd,
wa_crtx,
wa_qmfe,
wa_qmur,
wa_iloa,
wa_output.
start-of-selection.
SELECT qmnum
equnr
iloan
ausvn
ausbs
auztv
auztb
iwerk
FROM qmih
INTO TABLE it_qmih.
SORT it_qmih BY qmnum .
DELETE ADJACENT DUPLICATES FROM it_qmih COMPARING qmnum equnr iloan ausvn ausbs auztv auztb iwerk.
SELECT qmnum
qmtxt
indtx
priok
strmn
strur
ltrmn
ltrur
objnr
arbpl
vkorg
vtweg
spart
FROM qmel
INTO TABLE it_qmel
FOR ALL ENTRIES IN it_qmih
WHERE qmnum = it_qmih-qmnum.
SORT it_qmel BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmel COMPARING qmnum
qmtxt
indtx
strmn
strur
ltrmn
ltrur
objnr
arbpl
vkorg
vtweg
spart.
IF it_qmel IS NOT INITIAL.
SELECT parnr
parvw
objnr
FROM ihpa
INTO TABLE it_ihpa
FOR ALL ENTRIES IN it_qmel
WHERE objnr = it_qmel-objnr.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_ihpa COMPARING parnr
parvw
objnr.
IF it_qmel IS NOT INITIAL.
SELECT arbpl
objid
FROM crhd
INTO TABLE it_crhd
FOR ALL ENTRIES IN it_qmel
WHERE objid = it_qmel-arbpl.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_crhd COMPARING arbpl
objid.
IF it_qmel IS NOT INITIAL.
SELECT ktext
objid
FROM crtx
INTO TABLE it_crtx
FOR ALL ENTRIES IN it_crhd
WHERE objid = it_crhd-objid.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_crtx COMPARING ktext
objid.
IF it_qmih IS NOT INITIAL.
SELECT fecod
fegrp
qmnum
FROM qmfe
INTO TABLE it_qmfe
FOR ALL ENTRIES IN it_qmih
WHERE qmnum = it_qmih-qmnum.
ENDIF.
SORT it_qmfe BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmfe COMPARING fecod
fegrp.
IF it_qmih IS NOT INITIAL.
SELECT urcod
urgrp
urtxt
qmnum
FROM qmur
INTO TABLE it_qmur
FOR ALL ENTRIES IN it_qmih
WHERE qmnum = it_qmih-qmnum.
ENDIF.
SORT it_qmur BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmur COMPARING urcod
urgrp
urtxt.
IF it_qmih IS NOT INITIAL.
SELECT tplnr
iloan
FROM iloa
INTO TABLE it_iloa
FOR ALL ENTRIES IN it_qmih
WHERE iloan = it_qmih-iloan.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_iloa COMPARING tplnr
iloan.
LOOP AT it_qmih INTO wa_qmih.
wa_output-qmnum = wa_qmih-qmnum.
wa_output-equnr = wa_qmih-equnr.
wa_output-iloan = wa_qmih-iloan.
wa_output-ausvn = wa_qmih-ausvn.
wa_output-ausbs = wa_qmih-ausbs.
wa_output-auztv = wa_qmih-auztv.
wa_output-auztb = wa_qmih-auztb.
wa_output-iwerk = wa_qmih-iwerk.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_qmel INTO wa_qmel WITH KEY qmnum = wa_qmih-qmnum.
wa_output-qmtxt = wa_qmel-qmtxt.
wa_output-indtx = wa_qmel-indtx.
wa_output-priok = wa_qmel-priok.
wa_output-strmn = wa_qmel-strmn.
wa_output-strur = wa_qmel-strur.
wa_output-ltrmn = wa_qmel-ltrmn.
wa_output-ltrur = wa_qmel-ltrur.
wa_output-objnr = wa_qmel-objnr.
wa_output-arbpl = wa_qmel-arbpl.
wa_output-vkorg = wa_qmel-vkorg.
wa_output-vtweg = wa_qmel-vtweg.
wa_output-spart = wa_qmel-spart.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_ihpa INTO wa_ihpa WITH KEY objnr = wa_qmel-objnr.
wa_output-parnr = wa_ihpa-parnr.
wa_output-parvw = wa_ihpa-parvw.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_crhd INTO wa_crhd WITH KEY objid = wa_qmel-arbpl.
wa_output-arbpl = wa_crhd-arbpl.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_crtx INTO wa_crtx WITH KEY objid = wa_crhd-objid.
wa_output-ktext = wa_crtx-ktext.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_qmfe INTO wa_qmfe WITH KEY qmnum = wa_qmih-qmnum.
wa_output-fecod = wa_qmfe-fecod.
wa_output-fegrp = wa_qmfe-fegrp.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_qmur INTO wa_qmur WITH KEY qmnum = wa_qmih-qmnum.
wa_output-urcod = wa_qmur-urcod.
wa_output-urgrp = wa_qmur-urgrp.
wa_output-urtxt = wa_qmur-urtxt.
APPEND wa_output TO it_output.
CLEAR wa_output.
READ TABLE it_iloa INTO wa_iloa WITH KEY iloan = wa_qmih-iloan.
wa_output-tplnr = wa_iloa-tplnr.
APPEND wa_output TO it_output.
CLEAR wa_output.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM it_output COMPARING qmnum
equnr
ausvn
ausbs
auztv
auztb
iwerk
qmtxt
indtx
priok
strmn
strur
ltrmn
ltrur
vkorg
vtweg
spart
parnr
parvw
arbpl
ktext
fecod
fegrp
urcod
urgrp
urtxt
tplnr.
*CALL FUNCTION 'STATUS_TEXT_EDIT'
EXPORTING
CLIENT = SY-MANDT
FLG_USER_STAT = ' '
objnr =
ONLY_ACTIVE = 'X'
spras = en
BYPASS_BUFFER = ' '
IMPORTING
ANW_STAT_EXISTING =
E_STSMA =
LINE =
USER_LINE =
STONR =
EXCEPTIONS
OBJECT_NOT_FOUND = 1
OTHERS = 2
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id =
language =
name =
object =
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
tables
lines =
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*LOOP AT IT_OUTPUT INTO WA_OUTPUT.
*WRITE : / WA_OUTPUT-qmnum,
WA_OUTPUT-equnr,
WA_OUTPUT-iloan,
WA_OUTPUT-ausvn,
WA_OUTPUT-ausbs,
WA_OUTPUT-auztv,
WA_OUTPUT-auztb,
WA_OUTPUT-qmtxt,
WA_OUTPUT-indtx,
WA_OUTPUT-strmn,
WA_OUTPUT-strur,
WA_OUTPUT-ltrmn,
WA_OUTPUT-ltrur,
WA_OUTPUT-objnr,
WA_OUTPUT-arbpl,
WA_OUTPUT-parnr,
WA_OUTPUT-parvw,
WA_OUTPUT-objid,
WA_OUTPUT-ktext,
WA_OUTPUT-fecod,
WA_OUTPUT-fegrp,
WA_OUTPUT-urcod,
WA_OUTPUT-urgrp,
WA_OUTPUT-urtxt,
WA_OUTPUT-tplnr.
*ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = 'E:\CRM1.TXT'
FILETYPE = 'ASC'
APPEND = ' '
write_field_separator = '|'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
TABLES
data_tab = it_output
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Hi all -
My group is working in BW 3.5 and have loaded an infocube. Is it possible to remove one record from the cube without reloading everything? We need the entire record gone, not just a delta to reverse it. I should mention that this should be an automated process and not a quick manual correction.
Any ideas?
Thanks for your help!
JeffHi Jeff,
To do this from the cube (manually) please see:
http://help.sap.com/saphelp_nw04/helpdata/en/4e/b71038cba6a169e10000009b38f8cf/content.htm
Using the DELETE_FACTS, you can do the same as above, but the system will generate a program. The program can be made a part of the process chain, thus automating this job. But you need to see how 'variable' the selections are and if they can be incorporated into the program...if you need to delete just one record, then I guess you need to be extremely careful and specific with the deletion selections.
Hope this helps... -
How to remove credit card from iphone4s
how to remove credit card from iphone4s
Not sure what you mean by this. Are you trying to remove your credit card information from the App Store/iTunes store?
-
How to remove available downloads from the list
how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?
There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.
-
How to remove "open dns" from imac
how to remove "open dns" from imac
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and delete the server addresses. Click OK and then Apply.
-
How to remove SD Card from the Card Reader slot - Satellite A100?
Hi,
Is there anyone to help me? I inserted a 64 MB SD card in the card reader slot of my Toshiba A100 model. It's the first time i have inserted the card. The card is inside the slot. I can not take it out! I don't have any idea how to remove the card from the card reader slot. I can see the contents of my SD card, can open the files too. But how to remove it out from the slot. Please help me giving your idea to remove the card out from the slot.
ArjunHi
In my knowledge the SD card slot doesnt has a any additional helps like the PCMCIA slot to remove the card.
You have to remove it simply. Try to grab the card and move it out. You can try to use the pair of tweezers. Maybe it helps -
How to remove sd card from iMac
hi how to remove sd card from imac ,thanks
If your machine is in warranty, be careful not to do anything more that might damage it when removing it from the optical drive. You might even be able to convince an authorized service technician to carefully remove it under warranty from the optical drive. It is a design issue that lets people accidentally insert the SD card in the optical drive. Of course if that's the only copy of your information on the SD card, be sure to let them know that, so they are extra careful not to damage it when removing it.
-
How to remove an ipad from my account
I am given my first ipad away, how i remove this ipad from my account? I already reset all contents.
See http://support.apple.com/kb/HT5661.
-
How to remove esclamation mark from itunes
how to remove esclamation mark from itunes???
See these...
-> One computer using multiple iTunes Store authorizations
-> About iTunes Store authorization and deauthorization -
How to remove an iphone from my id
hi,
once my friend sync-ed his iphone with my computer. then whenever he is in wi-fi zone it is asking password for my used id for updating the apps. how to change the user name in his phone or how to remove his device from my apple ID. please help.
thanks
karthikThe only way to fix this is for your friend to delete all the content, on his/her phone, obtained using your ID. Fact is, that's called stealing. There is no other fix.
-
How to select multiple records from a TREE in the table
HI,
I have a tree structure which is in the table.When I open the node of the tree,all the subnodes are coming as one-one records in the table.I want to slect multiple record from this table.I applied onLeadSelect for this table,I can select only 1 record from the table.
Can any one plz suggest me how to select multiple records from the table so that I can get all the data of those selected record.
Regards
-SandipRashmi/Kukku,
First of all, Thanks for your help!
Is there any other way in which we can access tables other than using BAPIs or RFCs?
In my case, there is a table structure which has to be updated with values after validating a key. i don't think there is any RFC available now. do i need to create bapi/rfc for that?
Krishna Murthy -
How to remove a node from nlb at runtime?
hello,
i need to temporally exclude a node from an nlb.
May happen that a server is up and working but the web application i'm balancing is out of sinch with the same application in the others nodes.
Eg. some static variables are not the same of the same static variables of other nodes, because of a timeout, a write error and so on but the server is still working.
in this case i need to stop the server from nlb because the information in the web application is not in sinch with other nodes.
I need to prevent users from being serverd from this out to date server, untill it will became updated, but i need to do this programmatically
how can i do it?"DuoMi" <[email protected]> wrote in message
news:gnojbf$2sg$[email protected]..
> How to remove a node from XMLList
>
> I want remove the first node from XMLList
>
>
> and how to get the combobox all values string:
>
> <data>
> <value>2</value>
> </date>
> <data>
> <value>5</value>
> </date>
> <data>
> <value>8</value>
> </date>
>
> I need a string whit value "2,5,8"
>
> thkan you.~
I think something like
comboBox.dataProvider..value.toString()
will work. -
How to remove the "0" from the sum cell when the other cells are empty?
Hello!
When I use the formula to sum the values from a few cells, there is a zero in the sum cell when the other cells are empty.
My question concerns how to remove the 0 from the sum cell when the cells that will be summed are empty.
Thank you!
/Johan StrömbeckHi,
Please try the Mr. Laurence's suggestion first. Then, we may try the other workarounds.
1) Go to Excel option> Advanced>Display Option for this worksheet> Uncheck Show a zero in cells that have zero value
2) Go to Conditional Formatting>New Rule>Format only cells that contain> Value equal to 0> Format the color with white
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support -
How to remove a package from package structure?
Hello profs,
i have a problem. I add a package 'A' to another package 'B' in the package builder.
Now i don't know how to remove package 'A' from the list of package 'B'.
I have not found in the docu of package builder how to remove a package from the included list.
Has somebody an idea how to do it?
Thanks a lot.I found out that the relation between the packages saved in table TDEVC.
Field PARENTCL contains the surrounding package 'B' of the package 'A' field DEVCLASS.
At the moment the only way to remove the package is to modify the table.
But i look for another possibility for this issue.
Best regards
Waldemar
Maybe you are looking for
-
SQL Server Reporting Services Security
HiI have an issue where when opening the home page of my SQL Server Report Server via it's name http://HOSTNAME/reports/Pages/Folder.aspx It automatically assumes I'm the domain administrator and states TextThe permissions granted to user 'Domain Nam
-
Flash not working in Firefox at all
I'm running Firefox 16.0.2. Any pages with Flash tell me that I need to install the missing plugin. I've tried re-downloading the latest Flash Player a few times, uninstalling it from my laptop entirely, reinstalling, etc. and nothing has worked. I'v
-
How to create open file dialog for choosing file in application server?
I would like to have the same functionality as AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file. CALL FUNCTION 'NAVIGATION_FILENAME_HELP' EXPORTING DEFAULT_PATH = '.' MODE = 'O' IMPORTING RETUR
-
Hello, I just downloaded the new OSX Lion for my Macbook Pro. I recently bought the Zoom R24 and wanted to use that device as a audio interface, but come to find out there isnt a driver thats compatiable between the zoom R24 and the new Osx Lion. So
-
Why Firefox can not handle HTTP server pages?
This is almost an old unresolved bug<br /> So when I have access to the modem page, I find that the Firefox browser he can not handle it! I can not even browse the modem page "So simply some of the pages and sites have slow download sites! Should imp