How to remove music added to the frame

I have added music (in loop) to the first frame of main timeline (through property panel), So it keeps playing till the last frame, but when the control jumps to first frame again after finishing all frames there are two musics playing, How can that be stopped?

You don't have a lot of control if you dragged the sound to the stage and then set it to loop in the properties panel. You can either jump back to frame 2, so you don't play the sound at frame 1 when you loop the timeline or you can control the sound yourself using AS. Here's a little sample you could place in frame 1 that loops the sound 'libSound' 999 times, and only plays one time by using a flag variable:
var a:Sound;
var c:SoundChannel;
var isPlaying:Boolean;
if(!isPlaying){
    isPlaying = true;
    playSound();
function playSound()
    a = new libSound(); //sound from library
    c = new SoundChannel();
    c = a.play(0,999);   

Similar Messages

  • How to remove java icon from the frame and put own incon instead

    H Everybody
    Please tell me how can I remove standard java logo from JFrame and put my company's log instead
    Thanks in advance

    Hi,
    yourFrame.setIconImage((new ImageIcon("yours.gif")).getImage());Phil

  • Can someone please tell me how to remove music just from my device please? Many thanks. Steve.

    Can someone please tell me how to remove music just from my device please? Many thanks. Steve.

    >> then I get a completely blue screen.
    That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
    And sure enough, your video card driver is almost 2 years out of date.
    Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

  • How to remove available downloads from the list

    how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

    There is not a way to remove them from the list.  Just let them download, and then delete them from your library when they are done.

  • How to remove SD Card from the Card Reader slot - Satellite A100?

    Hi,
    Is there anyone to help me? I inserted a 64 MB SD card in the card reader slot of my Toshiba A100 model. It's the first time i have inserted the card. The card is inside the slot. I can not take it out! I don't have any idea how to remove the card from the card reader slot. I can see the contents of my SD card, can open the files too. But how to remove it out from the slot. Please help me giving your idea to remove the card out from the slot.
    Arjun

    Hi
    In my knowledge the SD card slot doesnt has a any additional helps like the PCMCIA slot to remove the card.
    You have to remove it simply. Try to grab the card and move it out. You can try to use the pair of tweezers. Maybe it helps

  • How to remove links pointing to the same page?

    I have PDF documents with Links which point to sections referenced (e.g. link of text "Section 2.2" points to the actual page number of "Section 2.2"), but as the links are created from cross-references during rendition from Word to PDF, there are cases that the destination page number and source page number of the links are the same (e.g. links of text "Section 2.2" on page 9 are created with the destination of page 9 which is the actual page number of "Section 2.2"), I want to remove all these links, but I don't know how to get the destination page, I check the API reference and find that "PDLinkAnnotGetAction" may work , but I don't know how to use it, could you check me codes below and advise ? Your help is really appreciated!
    PDPage page;
    ASInt32 i,i2;
    AVDoc avDoc = AVAppGetActiveDoc();
    PDDoc pdDoc = AVDocGetPDDoc (avDoc);
    int pageNum = PDDocGetNumPages(pdDoc);
    for (i = pageNum - 1; i >= 0; i--)
    page = PDDocAcquirePage(pdDoc, i);
    int annotNum = PDPageGetNumAnnots(page);
    for (i2 = annotNum - 1; i2 >= 0; i2--)
      if...
      PDPageRemoveAnnot(i, i2);
    My Product Information:
    Acrobat Pro 8.1.6, Windows

    Start by reading the PDF standard (ISO 32000-1) to understand Actions vs. Destinations.
    Then for each annot, you'll want to see which it has (and in the case of an Action, if it has more than one).  Then you need to parse the action or dest to see what it is and where it goes.  If you don't like it, then you'll delete it.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Tue, 25 Oct 2011 09:25:32 -0700
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: How to remove links pointing to the same page?
    How to remove links pointing to the same page?
    created by OALD<http://forums.adobe.com/people/OALD> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3989576#3989576

  • How to import multiple files to the frame area?

    How do I import multiple files to create animated GIF's. I
    know how to import multiple files into the Fireworks, but if I'm
    trying to create an animated gif that has alot of files, How do I
    get them into the frames area. It is really a pain importing each
    and every file one at a time frame by frame

    merry1
    after you bring in all your images to the canvas, select all
    and in the
    Frames Options drop down, select Distribute to Frames.
    You can bring multiple images onto the canvas by copy and
    pasting from
    the folder(s) where they exist.
    alex
    merry1 wrote:
    > How do I import multiple files to create animated GIF's.
    I know how to import
    > multiple files into the Fireworks, but if I'm trying to
    create an animated gif
    > that has alot of files, How do I get them into the
    frames area. It is really a
    > pain importing each and every file one at a time frame
    by frame
    >

  • How to remove unused objects from the webcatalog In OBIEE11g

    Hi,
    I want to delete unused objects from obiee11g catalog, i know in obiee10g it's working fine (i.e: we can do it via manage catalog then delete the unused objects) is there any way to do it automatically like RPD utility --->removing unused objects from Physical layer in RPD
    fyi: I don't want to delete manualy. i need somethink like button/link to find unused objects(report,filter,folder..etc) from my obiee11g catalog.
    Thanks
    Deva
    Edited by: Devarasu on Nov 29, 2011 12:06 PM
    Edited by: Devarasu on Nov 29, 2011 3:15 PM

    Hi,
    Checked with Oracle Support team and confirmed below points
    --> incorporated into the Current product and consider as BUG it may resolve future release
    --> Currently there isnt any automatic method to remove the unused objects like reports, filters,folder etc from catalog.
    Treated as Bug
    Bug 13440888 - AUTOMATICALLY REMOVE OF UNUSED CATALOG OBJECTS FROM WEBCATALOG
    FYI:
    SR 3-4984291131: How to remove unused objects from the webcatalog in obiee11g
    Thanks
    Deva

  • How to remove "all day" as the default setting in iCal?

    How to remove "all day" as the default setting in iCal? The iCloud calendar works by double-clicking but the local behaves differently.

    Hello Valerie,
    the default - "all day" or "time based" - depends on the view in iCal. In month view the default is "all day",
    in week view or day view it is a time interval, if you use "File -> New Event". If you add the event by double clicking into the calendar, it will depend on the section you are clicking - in the all day section you will add an all-day event, in the time-grid you will enter an event with start-end time.
    Regards
    Léonie

  • How to remove blank spaces in the source code of my page?

    I created a page with the following code for testing:
    <dsp:page>
    <dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/>
         <dsp:droplet name="ProductLookup">
              <dsp:param name="id" value="xprod2046" />
              <dsp:param name="elementName" value="product" />
              <dsp:oparam name="output">
                   <dsp:valueof param="product.DisplayName"/>
              </dsp:oparam>
         </dsp:droplet>
    </dsp:page>
    It only shows the product name in the browser. But if I look at the source code of my page he created 61 lines in response to this code, where a line is the product name and the other 60 have nothing.
    I know how to remove these lines that the ATG creates no content because my project is full of these empty lines.
    Anyone ever had this problem and could help me?
    Thanks

    Hi ,
    Yup this is a problem ,
    you can use following ways :
    1- use jsp comments eg :
    <dsp:page>
    <dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/><%--
         ----%><dsp:droplet name="ProductLookup"><%--
              ----%><dsp:param name="id" value="xprod2046" /><%--
              ----%><dsp:param name="elementName" value="product" /><%--
              ----%><dsp:oparam name="output"><%--
                   ----%><dsp:valueof param="product.DisplayName"/><%--
              ----%></dsp:oparam><%--
         ----%></dsp:droplet><%--
    ----%></dsp:page>
    2- End tags at next line :
    e g :
    * <dsp:page
    * ><dsp:droplet name=”xyz”
    * ><dsp:oparam name=”output”
    * >Name: <dsp:valueof param=”abc”
    * /></dsp:oparam
    * ></dsp:droplet
    * ></dsp:page>
    3- Always use TAB instead of using SPACEBAR whie writing source code.
    4 - From JSP 2.1 onwards we have a page directive trimwhitespaces ( see if that works , i was not able to ), google for it for more info
    5 - You can modify your build scripts to remove white spaces from jsps while building EAR.(complex though, as you may not want to trim all white space.)
    6 - modifying the deployment descriptor.
    <init-param>
    <param-name>trimSpaces</param-name>
    <param-value>true</param-value>
    </init-param>

  • HT2500 Does anyone know how to remove a group from the address panel in mail?

    Does anyone know how to remove a group from the address panel in mail?

    I haven't seen too many questions like this on this forum.  Did you also try the photoshop forums?

  • How to remove faces added on Facebook?

    Hello there,
    I'll try to describe my problem as precisely as possible.
    I have recently noticed that, after posting pictures on Facebook through iPhoto and then identifying some persons over there, their names do show up on my iPhone Photo App as separate entities!? ... although they do not appear at all in iPhoto on my Mac.
    So basically my question is: how can I remove/delete these persons/tags that I identified when once using Facebook (that I don't use anymore - account deleted) from the native iPhoto application? Obviously it kept this information somewhere in an hidden spot
    Thanks in advance for your help.

    Apparently, I found out myself, by going back on the pictures involved, taking the "naming" command and deleting the frame around the persons in question ...
    Not very intuitive but it worked apparently.

  • How to remove Cross Marks in the Report Column.of Cell..!!

    Hi Experts,
    I am facing an issue. I have included a Formula in the Cell  at Query Level.
    When i run the report in the Bex Analyzer.
    for that Formula column in the report there is some Cross Marks with Red Colour is displaying.
    But the Formula is added in the Cell area at Query designer level.
    Here user requirement is if there is no values calculated in the Formula column there should be no values has to be displayed.
    But unfortunately, here i am getting Cross Marks or Mulitply Symbol is displaying.
    My Question is Pls advice, How to remove those Red Cross Marks in the report of that Column.
    Thanks,
    SN.

    Hi,
    Whenever there is no value, by default, and SAP standard, it shows X mark.
    At reporting level you cannot do changes, as this change has to be done at global level. Hence make sure that if this has to be changes this will affect other reports too.
    If you still feel that X mark has to be displayed as blank, then you can do this in SPRO settings.
    SPRO->Display IMG->SAP Netweaver->Business Intelligence->Settings for Reporting and Analysis->and execute Presenting the numeric value in the Bex.
    Change the value:
    Does not exist : Remove X.
    Hope this solves your issue.
    Regards
    Jeeth

  • How to remove blank lines in the end of list .

    hi,
    in a complex report ,when there are only 20 pages,and linecount is 65(2) ,in the last page only 27 lines are filled and data is completed.then blank lines are printing from 27th line to 63 line.then end of page is triggering.
    so plz help me how to remove the blank lines here and immediately print the endof page.

    Hi,
    will this work for you.
    SET BLANK LINES OFF.
    These statements allow you to specify whether you want to output blank lines or not. Use SET BLANK LINES ON to output blank lines or SET BLANK LINES OFF to suppress them.
    Regards
    Viswanath Babu

  • How to remove characters/lines from the beginning of an InputStream

    Hi,
    I have a program which receives several InputStreams. From each of these streams I have to remove 2 lines from the beginning. After the lines are removed, all the streams are combined to one with SequenceInputStream and read in one chunk. Is there an easy/simple way of doing this?
    One option I thought would be to read the char by char until 2 end of line chars have been detected and then read the rest of the data to a buffer. And the create a ByteArrayInputStream out of this buffer. Problem with this approach is, that the amount of data can be large, so putting all the data in to memory might cause problems.
    Another option is to use BufferredInputStream and use the readline() method twice to get rid of the lines that are not needed. After this I would write the data to some output stream, which is then converted back to input stream. Propably would work, but sound too much of work for a simple thing like this. There has to be better way.
    To make it simple, what I need is a method that looks like the following, or something similar
    *  Removes n number of lines from the beginning of a InputStream.
    *  @param is InputStream where the lines are removed
    *  @param numberOfLines int value to indicate how many lines whould be removed
    *  @return InputStream where lines have been removed.
    public InputStream removeLines(InputStream is, numberOfLines);Thanks.

    Here's the code, feel free to use it. Comments are also welcome.
    public InputStream removeLinesFromTheBeginning(InputStream is, int numberOfLines) throws IOException
              char c = 'c';
              int i = 0;
              for(int n = 0 ; n < numberOfLines ; n++)
                   do
                        c = (char)is.read();
                        System.out.print(c);
                        if(c == (char)-1)     // end of stream reached before any newline characters were found.
                             return null;
                        i++;
                   while(c != '\n');
                   System.out.println();
                   System.out.println("Characters removed:" + i);
                   System.out.println("n: " + n);
                   i = 0;
              return is;
         }Edited by: dave_spaghetti on Jun 16, 2009 5:42 AM
    Fixed a bug.

Maybe you are looking for