How to render image dynamically in ADF using URL

Hi all,
I have a requirement where i need to render the images dynamically using the url. As the url are of the IPM Application and each of the url is associated to a particular image of a particular document. I have tried making the URL Data Control but couldn't able to get the Image as per the document,even the image is not being rendered onto the page.I want the whole IPM console to be rendered on my jspx page.
Note- It is not a wsdl url.
Please suggest how should i implement this
thanks in advance

if you decompile the imaging.ear file, there is a web.xml file which you can add the following parameter:
<context-param>
<param-name>oracle.adf.view.rich.security.FRAME_BUSTING</param-name>
<param-value>never</param-value>
</context-param>
or take a look at      Receiving "Warning: Unable to load content in a frame. Frame content will load at the top level." When Trying to Use the <af:inlineFrame> Component [ID 1266770.1] on Oracle Support.
Make sure you take a copy of the imaging app before you make changes. You can then upload back through the weblogic console.
Sudi

Similar Messages

  • How to add Image dynamically in Webdynpro ABAP

    Hi Experts,
    How to add Image dynamically in Webdynpro ABAP.
    My requirement is i maintain all the images in a table.
    image source has to pick the table URl dynamically and display.
    is that possible in webdynpro?
    and also please give the suggesion,
    without using MIME objects is that anyway to get images?
    Thanks in advance.
    Regrads,
    Jeyanthi

    Hi,
      are those icons wou want to display then. he following code will be useful.
    data : lo_IMG type ref to CL_WD_IMAGE.
    LO_IMG = cl_wd_IMAGE=>new_IMAGE( id = img_id SOURCE = 'ICON_BW_APD_TARGET' tooltip = sts_tltp ).
    lo_cont->add_child( the_child = lo_img ).
    here lo_cont is the container where you want to add the image dynamically and source is the attribiute through which you can change the ICON image. this thing you can getit from data base table and change accordingly.
    Regards,
    Anil kumar G

  • How to change images dynamically in jsp?

    Hi All,
    i Want to know how to change images dynamically in jsp, for example in any site if u look at advertise or any images, it will be changed after every few seconds.
    Please guide me
    Thanks
    Sandesh S

    sandeshas wrote:
    Hi BlusC,
    i was searching your mail Id to ask the question directly to u,i checked in your blog also, but i didnt get,I want to keep my email spam safe. Only trusted people and direct friends have it. Just use the forums for discussion.
    my question is suppose if i want to display and change the advertise(adds from different company ) in my web site,how can i do it by using jsp?
    Do i need to create animated gifs which contains all company adds??one might be from movie add,after few seconds next one migth be some other web site add like that, how can i achieve this in my servet,jsp or using struts.You create animated gifs with an [animated gif editor|http://google.com/search?q=animated+gif+editor]. There is nothing what JSP can do for you here.

  • How JEditorPane render images

    hello
    my JEditorPane is displaying pages well but images are not shown properly.
    how EditorPane will display the images properly
    i think image path is need to be rendered properly .
    any help will be appreciated
    thanx

    thanx for help
    i m not using setIcon().i think it will be used if display only image
    i m using ViewFactory, subclass of HTMLEditorKit
    and also create(Element elem) method to render images
    code is running well but not displaying image

  • How to embed image in html when using JTextPane, HTMLEditorKit, JavaMail

    I am developing a specialized e-mail client that has to be able to send e-mail messages (in html format with images and attachments) that can be read by standard e-mail clients, and receive similar messages from standard e-mail clients.
    I have everything working except for embedding images.
    Images are to appear in the document mixed in with the text, but that's not what I mean by "embed". By "embed" I mean that the image itself is encoded within the html.
    Here's a bit of code to set the context.
    JTextPane bodyPane = new JTextPane();
    bodyPane.setEditorKit(htmlEditorKit);
    bodyPane.setTransferHandler(new DropHandler());
    bodyPane.setDocument(new HTMLDocument());
    In the DropHandler I have the following:
    HTMLDocument htmlDoc = (HTMLDocument) bodyPane.getDocument();
    HTMLEditorKit htmlKit = (HTMLEditorKit) bodyPane.getEditorKit();
    int caretPos = bodyPane.getCaretPosition();
    At this point get "filename", the full path to an image file that has been dropped onto bodyPane.
    String htmlString = "<img src=\"file:///" + filename.replace("\\","/") + "\">";
    htmlKit.insertHTML(htmlDoc, caretPos, htmlString, 0, 0, HTML.Tag.IMG);
    This works just fine. The image is displayed in the document at the point of insertion.
    However, the image itself is an external file. I need to send an e-mail with this image and could send the image file as an attachment, but I obviously can't assume that the recipient of the email is going to save the attachment into the proper location.
    What is the best way to do this?
    There is a technique for embedding the actual image in the html, using this syntax:
    String htmlString = "<a href=\"data:image/png;base64,---mimed png image here--\" alt=\"Red dot\"></a>";
    I can't get this to work in JTextPane, so perhaps it's not supported. Also, there may be limitations on the size of an image. And apparently Internet Explorer doesn't support this.
    From what I read, using a "content identifier", that is, "cid:" and adding the image as another part of the e-mail message is probably the thing to do. I haven't taken the time to explore this yet.
    Does JTextPane support cid? Is that a nonsense question? I suspect what I need to do when the message is being composed is use absolute paths to local files with the images, and then when assembling the e-mail, attach the files and rewrite the html to build in the cid linkage. Similarly, when reading a message with cid's, the thing to do is save the body parts as files and rewrite the cid to point to the actual file.
    I have seen others ask similar questions, one as recently as last December, and the reply was to refer to a Sun tutorial. But that tutorial doesn't address the full problem of 1) inserting an image into a document (instead of attaching an image to a component) and 2) sending it as an e-mail message.
    I have yet to see an example that shows the complete package.
    Am I right that the data option I mentioned is not going to work?
    Am I right that cid is the best approach, and do I understand how to use it?
    Is there something else?
    Thanks
    John

    Hi Rocky,
    Are you using the DC?
    if yes then you need to put the image inside the component folder. after that close the application
    & reopen. You will get the image.
    In case this does not work then try refreshing the portal through server side. Once the cache is cleared, it will be up to view.
    Also check the Activity list you have created. It should be added to the dtr properly or else it wont be reflected once reimported the configurations.
    Regards
    Chander Kararia

  • How to upload & Download file in Adf using Jdeveloper 11.1.2 ??

    Hi All,
    I have just started working on Oracle ADF, Thanks a lot guys for solving our queries.
    I'm using Jdeveloper 11.1.2, How to upload and download file in ADF..?
    I have seen couple links on net but none of them worked on jdeveloper 11.1.2......
    Please Help......

    Hi guys,
    I'm able to download file in ADF using af:fileDownloadActionListener.......
    does any one knows how to upload a file using ADF???

  • How to get image properties in PDF using javascript or plug ins

    Hi
    How to get the image(all the images) properties in PDF using javascript or suggest plug ins
    Thanks in Advance

    HI,
    In the PDF Edit API's ( as has already been suggested) there is the PDEImage and using this you should be able to find out everything you need to know about any image in a PDF file.
    I would recommend starting with PDEImageGetAttrs
    Hope this helps
    Malcolm

  • How to embed images dynamically?

    HI all , I'm new to flex.
    Here is what I've already done, I use
    [Bindable]   
    [Embed(source="images/xxx.jpg")]
    private var img:Class;
    to embed several images in an application.
    But the source of these images can not be determined until the run time, I got image's url dynamically, and used some variables to store them. For example, an url may refers to an url
    var url:String = "images/xxx.jpg";
    Then I think it's possible to give its value to an image source by using
    [Bindable]   
    [Embed(source=url)]
    private var img:Class;
    However,it doesn't work. there is a compile error, the description is:
    "url" does not have a recognized extension, and a mime type was not provided
    Unable to transcode url
    So what's the problem here, and could any one give me some advice to embed images dynamically?
    Thanks!

    HI
    I don't think you can embed an image dynamically as you need to know the path of the image when you use the embed tag.  The embedding takes place at compile time, and you app would need to be compiled into a swf before your code loads.
    If you need dynamc images in an application then its usually done by loading them when the app is running.  You do this by using for example a HTTP service to load in the image paths.  You can then view them by assigning them to an image tag through Actionscript.
    I hope that helps and I got the idea of what you were trying to do.
    Heres a quick example I used for someone else on swapping images from an arrayCollection.  You could do something like this and populate the arrayCollection using a HTTP service.  Or just access the xml from the HTTP directly for the image paths
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" initialize="init()" xmlns:local="*">
         <mx:Script>
              <![CDATA[
              import mx.controls.Button;
              import mx.collections.ArrayCollection;
    [Bindable]
    private var ac:ArrayCollection = new ArrayCollection([
    {imageTitle : 'Car 1', imageUrl : 'http://www.geekologie.com/2007/12/07/future-car-1.jpg'},
    {imageTitle : 'Car 2', imageUrl :'http://www.speedace.info/solar_cars/solar_car_images/Solar_Wing_front_Japanese_e lectric_powered_car.jpg'},
    {imageTitle : 'Car 3', imageUrl : 'http://www.dezeen.com/wp-content/uploads/2008/09/gem-peapod-car-by-chrysler-llc- et008_027evsqu.jpg'}
    private function showCar(num:int):void {
    img.source = ac.getItemAt(num).imageUrl;
    imgTitle.text = ac.getItemAt(num).imageTitle;
    ]]>
         </mx:Script>
         <mx:Image id="img" source="{ac.getItemAt(0).imageUrl}" width="426" height="243"/>
         <mx:Label id="imgTitle" text="{ac.getItemAt(0).imageTitle}"/>
         <mx:Button label="Button" click="showCar(0)"/>
         <mx:Button label="Button" click="showCar(1)"/>
         <mx:Button label="Button" click="showCar(2)"/>
    </mx:Application>
    Good luck
    Andrew

  • How to Render Components Dynamically

    Hi All,
    I have a Problem with the valueChangeListeners and selectionListners. I'm trying to render the components dynamically in the listeners by making the rendered attribute '"true" or "false" . But it is not working. when I'm doing the samething in command button action method. I'm getting the result(i.e rendering components to "true" or "false"). But why my code is not working in the listeners.
    Can anyone help me how to render the components partially.
    Thanks in Advance,
    -Satish Dasari

    I tend to agree with Simon's comments regarding programatic usage of the PPR APIs. Fernando, can you post an example so that we can have a look at where you having issues?
    --Ric                                                                                                                                                                                                                                                                                                                                                                           

  • How to get image properties in PDF using javascript

    Hi
    How to get the image(all the images) properties in PDF using javascript?
    Thanks in Advance

    Hi
    Thanks for your quick response. Any recommended plug ins
    Thanks in advance

  • How to display images on labview interface using matrox meteor card acquisition

    how to acquire images on lab view interface.

    Hi,
    you have to use National Instruments IMAQVision library and Meteor drivers
    for this library. For drivers look at www.matrox.com, thirth party software.
    For doing image processing algorithms you need the IMAQVision library but
    when you only need acquiring and displaying in LV6.1 I think some basic acq.
    vi's are included.
    Good luck,
    Marc
    "abdel_73fr" wrote in message
    news:[email protected]..
    > how to acquire images on lab view interface.

  • How to change image position in PanelStrecthLayout  using css?

    Hi All,
    I am using JDeveloper 11.1.1.6.
    My Scenario is I need to show the image front of the Panel Stretch Layout .I tried to set like Style Class and change the Z-index but it's not working ,
    My Design Like :
    <af:panelStretchLayout id="psl3" inlineStyle="background-color:red" styleClass="ImageStyle">
                          <f:facet name="center">
                            <af:panelStretchLayout id="psl2" topHeight="40px"
                                                   inlineStyle="margin:20px;">
                              <f:facet name="center">
                                <af:panelGroupLayout id="pgl3" layout="vertical"
                                                     inlineStyle="background-color: Green">
                                  <af:panelGroupLayout layout="vertical" id="pgl4"   inlineStyle="margin-top:10px;margin-left:10px;background-color:Green">          
                                  </af:panelGroupLayout>
                                </af:panelGroupLayout>
                              </f:facet>
                            </af:panelStretchLayout>
                          </f:facet>
                        </af:panelStretchLayout>
    My CSS Codes :
    .ImageStyle{
    background-image: url("../img/sampleimage150x100.png");
    z-index:9999;
    background-repeat: no-repeat;
    How to show image in-front of the layout not it's hiding behind the layout ...
    Thanks..

    Hi,
    normally you would use skinning to skin the components. I don't think that layers make a different because with the stretch layout there are no overlapping layers. So maybe we should start with the use case you are trying to implement, I am not sure I understand the sentence: "I need to show the image front of the Panel Stretch Layout". What does this mean "in front" ? Do you want it to hide the panel stretch layout ? What is the use case?
    Frank

  • How to create Exchange dynamic distribution list using multivalue extension custom attribute

    I am trying to create a dynamic distribution list using an ExtensionCustomAttribute.  I am in hybrid mode with Exchange 2013.  The syntax I have is this: 
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {(ExtensionCustomAttribute2 -eq 'NH')} 
    This works correctly on-prem.  But hosted always results in an empty list.  I can see in dirsync the attribute is in the hosted environment, but for whatever reason, the distribution group gets created but always come up null.
    If I create a group looking at the single valued attributes, such as CustomAttribute6 -eq 'Y', it works correctly on-prem and hosted.  
    If anyone has any suggestions I would appreciate it.

    I don't think I provided enough information about the problem.  Let me add some and see if it makes sense.
    I have an Exchange 2013 on-premise configured in hybrid mode with Office365.  For testing purposes, I have 2 users, Joe and Steve, one with the mailbox on-prem, and the other with the mailbox in the cloud.  Each of them has CustomAttribute6 = 'Y'
    and ExtensionCustomAttribute2 = 'NH'. Dirsync shows these users and these attributes are synced between on-prem and cloud.
    Using on-prem Exchange powershell, I run the following command:
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')} 
    This correctly finds the 2 users when I query for them as follows:
    $DDG = Get-DynamicDistributionGroup DG_NH
    Get-Recipient -RecipientPreviewFilter $DDG.RecipientFilter | FT alias
    So I then delete this DG, and recreate it this time looking at the multi-value attribute ExtensionCustomAttribute2, as follows:
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')} 
    Replaying the query above, I can see this also works fine and finds my two users.
    Next I open a new powershell and connect to Office 365 and repeat the process there.
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (CustomAttribute6 -eq 'Y')} 
    This correctly finds the 2 users when I query for them.
    And then delete the group and recreate it using the multi-value attribute:
    New-DynamicDistributionGroup -Name "DG_NH" -RecipientFilter {((RecipientType -eq UserMailBox) -or (RecipientType -eq MailUser) -and (ExtensionCustomAttribute2 -eq 'NH')} 
    When I run the query this time it produces no result.  Every test I try results in an empty group if I am using a multi-valued attribute in the search criteria in the cloud.  If I use single valued attribute, it works fine.
    I really need to be able to get multi-valued DDG's working in the cloud.  If anyone has done this and has any suggestions, I would appreciate seeing what you did.  And if this is the wrong forum to port this, if you can point me to a more suitable
    forum I will report there.
    Thanks,
    Richard

  • How to view images from Pictures Folder using iPhoto?

    Right now when I click an image in the Pictures folder, the image is automatically opened using Preview. I want to view images directly from my Pictures folder, and have them open to iPhoto. Is that possible?
    I just want to be able to view/sort my photos by Folders rather than by Events, Titles or Photo dates. I can't seem to get them to sort by folders in iPhoto.

    Iphoto is a Photo Database designed to allow you to organise and manipulate you photos without recourse to your files.
    It's not an image viewer, it can only work with photos that have been imported to the database.
    I just want to be able to view/sort my photos by Folders rather than by Events,
    An Event is a folder of images with a fancy icon. You can organize your pics in iPhoto anyway you want, using Albums, folders, keywords and so on. It's far more flexible that using folders in the Finder.
    You can opt to organise the files yourself, rather than have iPhoto do it for you, but I don't recommend it.
    Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
    Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
    However, you need to be aware of a number of potential pitfalls using this system.
    1. Import and deleting pics are more complex procedures
    2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
    3. Most importantly, migrating to a new disk or computer can be much more complex.
    Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
    If disk space is an issue, you can run an entire iPhoto Library from an external disk:
    1. Quit iPhoto
    2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 and later*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and later* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    For users of 10.6 and later:
    You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and later:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
    Regards
    TD

  • How to View Smart Forms in Portal Using Url Iview?

    I am trying to view a smart form in the portal using url iview but not able to define proper url address. can any one help me out with relevant example?

    Hi,
      Go through Re: Web Dynpro and Smart Forms.
    Regards,
    Satyajit.

Maybe you are looking for