How to repartition of my notebook, besically it has 2 partition one is 190 gb and anither is 225gb

how to repartition of my notebook, besically it has 2 partition one is 190 gb and anither is 225gb

What is it that you want to do in terms of organizing your notebook's hard disk?
Windows allows a maximum of four primary partitions and more logical partitions inside the primary partitions.
You can also extend a partition after shrinking another partition or with the use of free raw space if there is any. 
When you create the volume it is advised to stay with a simple volume as changing from a dynamic volume back to a simple volume is a bit more involved.
I do hope you made a recovery disk set or USB recovery thumbdrive. The operating system, drivers and applications your notebook was delivered with are available for reinstallation from within the recovery manager environment contained in the recovery media.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • How do I sync 2 iPhones to 1 iTunes account if one is already synced and i dont want them to share info?

    I synced my phone to my ittunes and my mom wants to back up hers on my itunes as well before she updates. can she do that without adding all my apps and data? how should i go about doing it?

    Welcome to the Apple Community Bill.
    Do you each have your own Apple ID for iTunes.
    How did you get the songs onto your phone.

  • My iPhone was set to the wrong ICloud account; how can i reset it so it is on the same one as my iPad and MAC?

    My new  iPhone was mistakenly setup with a new account diferent from theone on my iPad and MAC, iTunes and Mobile Me.  I finally got Lion and moved my MobileMe to iCloud.  I then found out this mistake when my iPhone was not synching with my iPad and MAC.  the onloy way I can see to fix this is reset the account my iPhone iCloud if set to, but see not way to do that or any instruction to do this resetting.  Does anyone know how to do this?

    Go to Settings>Mail, etc.>iCloud and delete the account. Then add in a new account with the details you want.

  • How can I plot two plots with two different Y axis,one on the left and one on the right ?(double axis)

    I have read many similar questions  on the forum but I see no best ways . I use DAQ card .LabVIEW 8.0, to measure two signals at the same time  ( ex: intensity mA (autorange),temperature:0-400oC) and I want to plot them on the same graph. I used stack plots without problems,but it doesnot satisfy me . Help me.
    Attachments:
    doulbe axis1.JPG ‏56 KB

    Ok, I did all as you told me. I got the graph that I want to create. I got two curve on the same graph but the scale is not right. Only on one Y axis the scale is correct, the other is not . ( I want to use one Y axis : 0 to 400, the other :0-10 (or autoscaleY)). The attached screen shot shows that. It is no problem when I use stack plot. Thanks.
    Attachments:
    doubleaxis.jpg ‏114 KB

  • How do you get your inbox to stop "loading" messages (big ones sometimes take long and need to be stopped).

    Is there a way to stop or pause the loading?

    Not to my knowledge. To make the Mail process faster, and to cut down on your data use go to Settings > Mail, Contacts, Calendars... Mail section:
    Set Preview to None.
    Turn OFF Load Remote Images.
    You can also set the size of Show to 25. This will make the chunk of data your working with a bit more manageable.
    These are the setting that make Mail snappier on my iPhone 3G. (I'm trying to hold out for the next version! )

  • How can I replace an old HDD with a new larger one and keep exisiting data?

    I have a 1TB Seagate Barracuda drive in my Windows 7 64-bit desktop machine. It has 3 partitions, one is the boot drive. 
    This drive is four years old and I would like to replace it with a new one -- probably a 3TB Barracuda. I want the new drive
    to behave exactly like the old one -- not interested in upgrading to Windows 8 right now. 
    How would I go about cloning the old drive to the new one so that the new drive also has 3 partitions, but each one is bigger
    -- three times as big, to be exact, with everything working the same as on the old drive?
    I'm thinking that if I just mirror the old drive to the new (using cloning software), the new drive will have 3 smaller partitions
    totaling 1TB and a big empty space of 2TB. Can I then increase the sizes of the existing partitions without destroying any data? Would the boot drive still work?
    Or would it be better to create the 3 partitions of 1TB each on the new drive and then clone the old drive partitions to the
    new partitions? Would the cloning software be able to do that correctly, so everything would still work? Do I need to buy partitioning software? Any advice will be appreciated. Thanks.

    Hello,
    The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
    As the question is off topic here, I am moving it to the
    Where is the Forum... forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • HT2374 How do I relocate my /users directory to a new partition?

    How do I relocate my /users directory to a new partition?

    Drag them there and then either put symbolic links to them in their original location or open the Users & Groups pane of System Preferences, unlock it, control-click each account, choose Advanced Options, and change the home folder path.
    (122052)

  • How to connect my CQ60 notebook to TV with "HDMI to RCA" cable?

    Hi there
    I have a Compaq Presario CQ60-213TU notebook computer which has an HDMI port. I bought an "HDMI to 3RCA+VGA" cable from ebay. I was able to connect my laptop to the extenal display with VGA, but when i tried to connect my laptop to my non HD tv it did not connect.
    Has anyone got a solution how to connect my laptop to my tv with "HDMI to 3RCA" cable.
    Please reply asap.
    Thanks

    you said it did not connect. what do you mean. what was displayed? what input did you have the tv on? need more info than "did not connect"
    click Kudos to say thanks if I helped

  • How to Repartition 3TB Fusion Drive?

    Hi, I've noticed an interesting phenomenon of my iMac, which has a 3TB fusion drive. The phenomenon is that the fusion drive has a 2.2 TB + 800GB partitions. I understand fusion drive is actually a 128GB flash drive plus a 2.87GB hard drive. Then why is the fusion drive divided into a 2.2 TB and a 800 GB partitions?
    Anyways, that was just my curiosity. I have a practical question. I am trying to install Windows 8.1 on this iMac to do some development/environment testing works. I realized when I use Boot Camp 5.1, it will not let me install Windows 8.1 successfully. The error is when I head to Windows installation, formatted the Boot Camp partition to NTFS (or simply just format it), it will keep telling me:
    "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed GPT disks"
    I then tried making a USB bootable disk through UNetBootin. It tells me the same thing. I don't have a CD or DVD drive on my iMac, so I cannot try burning a DVD. So then I started my research about this error.
    And it seems to be a common error based on my research. The solution is that I should remove the bootcamp partition from Boot Camp Assistant and then use the Disk Utility to create a new partition for Windows. I did the first part, but then I head to the Disk Utility, it says:
    "The full size of the Fusion Drive is not available for repartitioning."
    I restarted the computer, and it tells me the same message.
    Now I guess I have two questions, answering either one can help me through my goal.
    1. How to create partitions on a 3TB fusion drive?
    2. How to install Windows 8.1 on a Boot Camp partition?

    Hey I meant to answer my own question! Thanks for reminding me.
    A good reference link is on Super User where some other users already answered methods for Macbook Pro. Here is the link:
    http://superuser.com/questions/481650/cant-use-bootcamp-partition-for-windows-8- installation/846439#846439
    I am going to copy my reply from the thread. Here we go:
    I was stuck with this challenge last night as well. After 10 hours, I finally have resolved this. As it turns out, not all OSX are the same. For example, I have Macbook Pro Retina, iMac, and Mac Pro. ClaitonLovatoJr's solution works on Macbook Pro Retina but not iMac or Mac Pro.
    Here is why:
    iMac (2014) and Mac Pro (2014) have different types of hard-drive. So far I haven't gotten Mac Pro to work, because it has the most particular type of hard-drive, perhaps Windows simply does not support. But again, I haven't tried for very long.
    On iMac, here is how you can get Windows 8.1 (Professional) to install.
    Since late 2012, iMac have fusion drive, which means its hard-drive is combined with SSD and traditional hard-drive. As a result, Apple has an interesting way to manage it. I am not going to the details. In short, EFI would not work with the hardware, so we must go through Apple's Boot Camp.
    The first thing to do is to find a USB flash drive. Many people including me failed because we try to use SD card. This won't work because SD card is too advance for what we are doing. It will load the install program, but after loading it becomes all Windows, and then it will fail the installation. So what we need is an old fashion flash drive. I tried using SD card adapter, it failed too. It might have something to do with the type of adapter I have. But to be safe, we should USE FLASH DRIVE.
    Then we will create an installation stick with Boot Camp Assistant. Be sure to use the latest 5.1 version. And we must check downloading from Apple, because it will give you drivers you need to complete the installation. If downloading failed for some reason, we can download the files here:
    http://supportdownload.apple.com/download.info.apple.com/Apple_Support_Area/Appl e_Software_Updates/Mac_OS_X/downloads/031-3384.20140211.Xcc3e/BootCamp5.1.5621.z ip
    And then manually place the files to the installation disk.
    I suggest not to check install just yet, in case you need to manually place the file.
    Now we can finally use Boot Camp Assistant to install Windows. We must use it because Boot Camp is the only application that can create usable disk space for the installation. Disk Utility or other type of applications will not work. Apple has a very specific design for the hybrid EFI-MBR system for iMac's fusion drive.
    Then the computer should restart, and very likely to stuck in black screen. Don't panic, this is because there is a bug in Apple's Boot Camp loading system. The wait time is too short, if you have many devices connected it will not load correctly. We can power off the computer by holding the power button and then power up while holding option key.
    Now we cannot choose EFI-Windows when booting up, we must choose Windows. EFI is faster and more advance, but we cannot use it.
    Now we should be able to boot into the installation interface, a very lowres one. If you see a highres interface it means it went to the EFI. Power down and try again. If you don't see the lowres interface, something went wrong. Boot into OSX and remove Windows through Boot Camp Assistant (actually just to kill the new partition), and then redo everything.
    If you are in lowres interface, it's not all done yet. You still need to format the new partition, either just by clicking on format or using command center. Now you should be able to install!
    After installation we can set up Windows, but it will die and reboot. Don't panic, because iMac is not design for Windows. Windows thought it had some hardware failure. And then we will be able to login after rebooting, but it will stuck for a long period of time - like 20 to 30 minutes. This is because it needs to download and set up some drivers for the odd environment it encountered. Finally, we will see pop up to encourage us to install Boot Camp on Windows. We don't have to. We can always use option key went starting the computer. But it's up to you.
    When shutting down Windows sometime it will fail and give you errors, this is because Windows ultimately does not work with Apple's driver very well (fusion drive or other hardware). No worry, just power down by holding the power button.
    Hopefully this help!

  • How do I connect my notebook to my car power socket?

    How do I connect my notebook to my car power socket? Is there a cable that goes from the Magsafe cable directly to a car power socket?

    Wel yes i have one um you have to buy it off ebay

  • How to check does my notebook use integrated or AMD graphic card?

    How to check does my notebook use integrated or AMD graphic card? Some games show me that they use integrated card: http://img849.imageshack.us/img849/4125/98ab1c28dc9f4b51b537435.png ?
    This question was solved.
    View Solution.

    Hello,
    First click in Start Menu, Control Painel in the up right side click in Category and left in Small Icons.
    Search Device Manager.
    Display Adapters.
    Which is your Operation System ?
    Windows 7?
    If yes.
    Click with the right clickpad in the desktop and select Display.
    Screen Resolution you can see how graphic your used or change if you want to.
    Att Cristian
    If this answer help you click in Kudos to tanks.
    Tanks
    If this answer help you click in Kudos to tanks.
    If you don't have more question click in Accept as Solution to close this case.
    Best Regards Cristian Derick.
    Senior Support Analyst.

  • How can i recover my notebook

    how can i recover my notebook..i have recovery in my laptop but i dont know the method that how i install it

    Edited to avoid a dulicate post
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if i

  • How can i buy z830 notebook with 256SSD?

    how can i buy z830 notebook with 256SSD?

    Send the person who'd give it to you this link; the us and LL in the URL will be different outside of the United States.
    (113101)

  • How to repartition my disk on ProBook 6550b

    Hi all,
    I've got a HP probook 6550b with 160GB hard disk. It has 4 partition on the hard disk:
    - System partition (~300MB)
    - Windows partition (~130GB) - C: drive
    - Backup partition (~15GB)
    - HP tools partition (~2G) - F: drive
    Now I need to create 2 new partition for my demands. All of them are primary partition, and I cant shrink the windows partition to create another.
    Who can tell me the purpose of these partition? And how to re-partition my disk to have new partition?
    Thanks for pay attention.

    Have you:
    1) Created HP recovery media? either DVD or USB
    2) installed UEFI?
    Are you aware that you will lose access to the HP Recovery manager by the F11 key if you change the partitions?
    There is a limit of four primary primary partitions on a hard disk. You can create logical partitions inside the primary partitions. I suggest you read a bit to gain knowlege of partitioning hard disks. You might find that  purchasing an external hard disk is more practical.
    System tools partition holds the UEFI BIOS update and diagnostics. If you delete this partition you will be losing the most tecnologically advanced means of updating BIOS available. You may or may not be able to recreate the partition.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Toshiba notebook registration reminder has stopped working

    Hi
    everytime I open my laptop it shows "Toshiba notebook registration reminder has stopped working"
    How can I fix that?

    Hello
    Do you need the registration reminder? I dont think so if you have already registered your notebook
    Easiest way is you disable the program from start up Navigate to start > run > msconfig and select start up tab. Then search for registration reminder and uncheck the box.
    Afte restarting the computer it shouldnt appear anymore. Can you confirm this?

Maybe you are looking for

  • Data in spool file does not match output.

    This is a strange issue, and I'm not even sure it's a problem in SAP, but I don't know where else to ask and haven't found anything like it online: We create pick lists on dot matrix printers.  Occasionally, the output is missing a digit or character

  • How do I remove Sub Title w/o removing Chart Title in components?

    I'm trying to remove the Sub Title area from a component by unchecking the Sub Title box under Appearance/Text tabs but this also removes the Chart Title.  Is there a way to remove just the Sub Title w/o the Chart Title?  I'm using a bar chart compon

  • 2 questions for Oracle portal

    i work with portal 10.1.4 2 questions: Is possible to display in my portal the online users or how many are visited every day the portal ? i try but i dont cant update my portal to latest version 10.1.4.2. 10.1.4.2 buider have differences from 10.1.4

  • Accessing large data sets via UME

    NW 7 What is the best way to access large user data sets via the UME?  Attribute mapping provides String[] for User Profiles but what is the best approach for larger user data sets? Say there is a list of user data exceeding 5 thousand records. What

  • Photoshop CS 4 won't use paper profiles.

    Running Photoshop CS 4. Changed operating system to Windows 7 64 bit. Using a calibrated monitor and Epson 3800 printer. The paper profiles are not being applied by photoshop. Printed 50% gray scale patches with no correction. The printer managed  pa