How to replace bad sup in 4500 VSS cluster
I have a Supervisor 7-E on its way to replace a bad one in a 4500 VSS cluster that handles my executive row and I've just realized I only have the foggiest idea what config is required to make it join the VSS cluster.
I've looked and not found anything on point. Does anyone have a quick cheat sheet on how to do this?
I actually was able to read between the lines of some different docs and came to the exact same conclusion. There is one BIG caveat that is not mentioned in your document and that is licensing.
First, Cisco TAC is totally ill-equipped to understand how VSS affects commands output on the 4500 and was little to no help in the process. I figured out the other issues below on my own and basically told them what I needed
The RMA'd unit will not have the correct license on it, it will only have LAN base which does not support VSS
4500's are licensed per chassis, not per supervisor HOWEVER the supervisor(s) are where the license resides (on 4500 sup7/8)
The "show license udi" and "license install <location>" command only run on the active supervisor. There is NO WAY that I could find to update the license on the inactive supervisor. If you replace a chassis or supervisor and add it to the VSS cluster before doing licensing, you will have to reboot the current active chassis before putting the correct license on it
You are FAR better off getting the licensing straight before adding an RMA replacement supervisor/chassis added to the VSS cluster then after.
Similar Messages
-
How to replace a field's search help of DDIC in FPM feeder class?
Hi All,
I want to replace a field's search help in DDIC structure, for an example, in structure HCMT_BSP_PA_XX_R0009, the field BANKL(Bank Keys) has a search help named 'H_BANKL', I want to replace this search help with other one such as 'H_BANKEY' in the FPM feeder class CL_HRESS_PER_DETAIL, I redefined such method:
method if_fpm_guibb_form~get_definition.
field-symbols: <fs_field_description> like line of et_field_description.
call method super->if_fpm_guibb_form~get_definition
importing
es_message = es_message
eo_field_catalog = eo_field_catalog
et_field_description = et_field_description
et_action_definition = et_action_definition
et_special_groups = et_special_groups
ev_additional_error_info = ev_additional_error_info.
read table et_field_description assigning <fs_field_description> with key name = 'BANKL'.
set search help name of field 'bank key'
if <fs_field_description> is assigned.
<fs_field_description>-ddic_shlp_name = 'H_BANKEY'
endif.
endmethod.
I test it and found the search help window was replaced indeed, but all the value of import/export parameters in the new search help was lost, it means, the value of import paramer BANKS(Bank country) and the export parameter BANKA(bank name) were lost. Only the value of BANKL itself can be returned by the new search help window. Can you give me some suggestions about how to maintain the link( value exchange) between structure HCMT_BSP_PA_XX_R0009 and dynamically defined search help 'H_BANKEY' in FPM feeder class?
I tried to use sap memory ID but it doesn't works well.This question was answered at [Webdynpro Forum|how to replace a field's search help of DDIC in FPM feeder class?;:
That is because for the import and export of DDIC Search help values to work in WDA, not in FPM layer.Feeder Class can do nothing about it. -
BAD SUPER BLOCK: MAGIC NUMBER WRONG
My Mac mini started playing up a couple of weeks ago, I thought it was the attached firewire drives, but it looks like a problem on the hard disk. I've been trying to fix this and I need help!
- I tried to restore leopard - only to find my leopard install disc is corrupt. I tried to make a copy with toast, but that failed, a couple of times
- So I've tried to use disk utility. I try to repair the volume. It gets to 'Checking Catalog file'. Then it gives the messages:
Invalid Key length
Volume check failed
Eror: Filesystem verify or repair failed.
- Then, booting from another leopard disk (for another machine, so I can't install from it), I've been running fsck. It says it can't the superblock, when I make suggestions I get the above message 'Bad super block': magic number wrong'. Any idea where there might be another valid copy of the superblock?
So, I'm a bit stuck. It's really annoying that the leopard disk that I bought doesn't copy and doesn't install.
Any suggestions gratefully received!How to Make a Non-Commercial DVD copy of MAC OS X Leopard
Making a DVD Image
Step1. Insert the retail Mac OS X Install DVD into your drive.
Step 2. Launch Disk Utility (Applications > Utilities).
Step 3. In Disk Utility, you will notice a white pane on the left hand side. In the pane, select the Mac OS X Install DVD by clicking on it once.
Step 4. Click New Image on the Disk Utility toolbar.
Step 5. A dialog box will appear. Give the new image a name. I used 'Mac OS X Install DVD'. Select the destination where you wish to save it. Leave Image Format at Compressed (default) and Encryption at None (default).
Step 6. Click Save to begin creating the image.
Step 7. Once your image has been created DO NOT mount it. Leave the image alone and proceed to the next section.
Burning the Image
Step 1. Launch Disk Utility (Applications > Utilities).
Step 2. Click Burn on the Disk Utility toolbar (upper left).
Step 3. Navigate to where you saved the DVD image created in the previous section. Click on the image file, then click the Burn button. Do not drag and drop the image file into Disk Utility during this step.
Step4. Insert a DVD when prompted and proceed to Burn it. (use good quality media) Using these exact steps I was successfully able to create a personal backup copy of Mac OS X Leopard. I hope this tutorial helps. -
Satellite Z830 - how to replace broken Screen?
A careless family member has succeeded in cracking the screen of a fairly new Toshiba z830. It's broken quite badly, so I doubt it will be reparable.
I was wondering if anyone could offer any advice on the best way to go about getting a replacement, bonus points for any information in the Melbourne area.
Thank youI'd rather not pay the $459 or 459 or whatever to get the screen fixed by Toshiba. I've had 20 laptops before, I never cracked a screen like this so easily. I didn't drop the laptop nor bump it nor squeeze it, I just transported it in my hand baggage on the airplane as I always do with many previous laptops, the Z830 screen is too fragile. I really like the screen, I like its matte finish, I like the thin and light magnesium form factor of the laptop, and swobbly screen does not bother me, except the design is just much too fragile, the glass surface of the LCD is not protected as it must be. I'm the one who video-blogged this interview with a Toshiba representative about that nice design afterall: http://www.youtube.com/watch?v=z_Cq07Ee89o
Since I don't want to pay the $500 repair fee, and since I guess Toshiba never replaces a cracked screen under warranty? I need to know if it'll work if I buy this screen: http://www.laptopscreen.com/English/model/toshiba/PORTEGE~Z830-S8302/ and I need to know exactly what screw driver I need and if there is a YouTube video and/or tutorial with detailed images and explanations so that I can hopefully safely make the screen replacement myself. And thus so that I can do it for about $100 myself instead of paying Toshiba $500 to make it.
I guess it'd be best if Toshiba actually sold that screen and the necessary screw driver to DIY change a broken screen (loose warranty is ok then), does Toshiba sell the screen replacement and screw driver for Z830/Z835?
I also tried http://screensurgeons.com/ and http://youtube.com/ScreenSurgeons/ but they don't seem to have made a video showing how to replace the Z830/Z835 screen yet.
If you look at the comments on this video http://www.youtube.com/watch?v=hMH0r76zdt0 about the Z830/Z835 teardown (only to replace RAM or SSD), there are several comments from users who also cracked their Z830/Z835 screen but I can't seem to find on YouTube a video showing how to replace the screen yet.
Thanks for your help. I'd like to buy that screen replacement soon, I need this laptop screen fixed before I go on a travel on October 11th. -
Hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen
hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen
Hp india have bad service ever. I hv order three notebooks ' hp 15-ac026tx' before five days for firm. Distributior open the boxes. But at the time of installation not single driver supporting to 2gb graphics card. As distributor made with Hp support they replied the engineer will come to ur place soon. But still no one has come. And im going to cancel this order and will prefer other compony.
-
How to find BADI Defination and Implemantation from Method of BADI?
HI,
can anyone tell me that how to find BADI Defination and Implemantation from Method of BADI?& Report ZPJA_PM002 (V2) &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 158.
*tables: enlfdir. "Additional Attributes for Function Modules
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(40) type c,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc <> 0.
message e110(/saptrx/asc) with 'No program found for: '
p_tcode."#EC NOTEXT
stop.
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode.
"#EC NOTEXT
stop.
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
WITH ANALYSIS.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
if p_devc = 'X'.
loop at i_fmodule.
clear: wa_tadir, wa_enlfdir.
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
check not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
i_fmodule-done = 'X'.
modify i_fmodule.
endloop.
sort i_devclass.
delete adjacent duplicates from i_devclass.
endif.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into
w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IF_'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name =
wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc <> 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(40) c_col5, "Enhancement description
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(40),
sy-vline.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC
*NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
reward points if it helps
gunjan -
How to replace NULL values from main table
Dear all,
I like to remove the NULL values from a main table field. Or the question is how to replace any part of the string field in MDM repository main table field.
e.g. I have a middle name field partly the value is NULL in some hundreds of records, I like to replace NULL values with Space
any recommendation.
Regards,
NaeemHi Naeem,
You can try using Workflows for automatically replacing NULLs with any specific value.
What you can do is: Create a workflow and set trigger action as Record Import, Record Create and Record Update. So, that whenever any change will occur in the repository; that workflow will trigger.
Now create an assignment expression for replacing NULLs with any specific value and use that assignment expression in your workflow by using Assign Step in workflow.
For exiting records, you will have to replace NULLs manually using the process given by Preethi else you can export those records in an Excel spreadsheet which have NULLs and then replace all NULLs with any string value and then reimport those records in your MDM repository.
Hope this will solve your problem.
Regards,
Varun
Edited by: Varun Agarwal on Dec 2, 2008 3:12 PM -
How to replace obsolete download function module in ECC6.0?
Hi Experts,
How to replace obsolete download function module in ECC6.0?
Thanks,
Adi.Hi,
DOWNLOAD is obsolete FM in ECC 6. To get the same functionality , we need to use
CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG method (It provides the File selection feature)
and
GUI_DOWNLOAD function module.(It downloads the internal table from program to presentation server)
Please see the example below:
Example:
*CALL FUNCTION 'DOWNLOAD'
EXPORTING
FILENAME = p_filename
FILETYPE = DAT
TABLES
DATA_TAB = T_DOWNL
EXCEPTIONS
INVALID_FILESIZE = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
OTHERS = 6.
*End of deletion CH01-
Replacement Method for above code:
DATA: l_filename TYPE string,
l_filen TYPE string,
l_path TYPE string,
l_fullpath TYPE string,
l_usr_act TYPE I.
l_filename = P_filename.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
EXPORTING
DEFAULT_FILE_NAME = l_filename
CHANGING
FILENAME = l_filen
PATH = l_path
FULLPATH = l_fullpath
USER_ACTION = l_usr_act
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4.
IF sy-subrc = 0
AND l_usr_act <>
CL_GUI_FRONTEND_SERVICES=>ACTION_CANCEL.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = l_fullpath
FILETYPE = 'DAT'
TABLES
DATA_TAB = T_DOWNL
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22. -
How to replace double quotes with a single quote in a string ?
Hi All:
Can some one tell me how to replace double Quote (") in a string with a single quote (') ? I tried to use REPLACE function, but I couldn;t get it worked.
My example is SELECT REPLACE('STN. "A"', '"', ''') FROM Dual --This one throws an error
Thanks,
Dima.Whether it is maybe not the more comfortable way, I like the quoting capabitlity from 10g :
SQL> SELECT REPLACE('STN. "A"', '"', q'(')') FROM Dual;
REPLACE(
STN. 'A'{code}
Nicoals. -
How to replace multiple occurences of space in a string to a single space?
How to replace multiple occurences of space in a string to a single space?
Hi,
try this code.
data : string1(50) type c,
flag(1) type c,
dummy(50) type c,
i type i,
len type i.
string1 = 'HI READ THIS'.
len = strlen( string1 ).
do len times.
if string1+i(1) = ' '.
flag = 'X'.
else.
if flag = 'X'.
concatenate dummy string1+i(1) into dummy separated by space.
clear flag.
else.
concatenate dummy string1+i(1) into dummy.
endif.
endif.
i = i + 1.
enddo.
write : / string1.
write : / dummy. -
How to replace/remove/change font color of a character at in output
Hi all,
I am using rtf template to get the output of a report, however i have a condition for field "Narratives" where if field A contains 'X', I need to either get rid of the 'X', replace with '' or change the font of X to white.
Meaning if the output is : My Name is BavaniX
I need it to look like : My Name is Bavani
I use the BI Publisher desktop tool to create the placeholders. Highly appreciate if someone could advise me on how to replace with '' or change X to white font or remove the X using the BI desktop tool.
The placeholder right now looks like this <?(NARRATIVES)?>.
Thank you.if you want to replace also look at
How to remove underscore in xml tag
Re: How to remove underscore in xml tag
Edited by: AlexAnd on Aug 2, 2012 5:55 AM -
My iPad2 Apple logo (the blue box with a capital A) was deleted in error. I would like to know how to replace it or get it back. Thanks so much . . .
Do you mean the App Store app on your iPad ? If you do then it can't be deleted, but you might have hidden it via Settings > General > Restrictions > Installing Apps 'off' - if that is 'off' then turn it back 'on' and the app should show on one of your iPad's home screens again
-
Join us at 1:00pm Pacific time for a LIVE video tutorial of how to replace a video card and configure video settings! The video features HP experts who work with the products every day!
I am an HP employee.#test
-
Join us at 11:00am Pacific time for a LIVE video tutorial of how to replace a hard drive! The video features HP experts who work with the products every day!
I am an HP employee.#test
-
How to Replace Null Value as 0 in an OBIEE11g Pivot Table? it's working 10g
Hi,
How to Replace Null Value as 0 in an OBIEE11g Pivot Table? it's working in obiee10g version.
We have tried below methods
1) criteria tab and edit the ‘column properties’ associated with your fact measure. Choose the ‘Data Format’ tab, tick to override the default format and choose ‘Custom’.
It seems that the syntax for this custom format is positive-value-mask (semi colon) negative-value-mask (semi colon) null-mask. So this means we have a few options.
E.g. if you want zeros (0) instead of null then enter:
#,##0;-#,##0;0
2) in that formula columns we have put it below case condition also ,
Measure Column: Nom_amt --> edit formulas
CASE WHEN Nom_amt IS NULL THEN 0 ELSE Nom_amt END
3) we have uncheked IS NULL check box in the admin tool also
I tried above formats still it's not working for me..kindly help me on this..
thanks to do the needfull
Best Regards,
R.DevarasuHi,
Null value in database displaying as 0 in report, I need to keep value as in database, and I have one calculated row which is based on null values should also null in report.
but it showing 0 for null values also so, my calculated row showing wrong result.
my report is like
col1 col2
ABC 0
BCD 12
DEF -12 --this is calculated row.
I require result like:
col1 col2
ABC null
BCD 12
DEF null --this is calculated row.
Please let me know how I can achieve this.
Thanks,
Rahul
Maybe you are looking for
-
Check for null value of an attribute
Hi, I am reading an attribute using the get_attribute method of the element of a node. Depending on whether the value of this attribute is initial or not, I need to do some further processing. But the get_attribute method itself is giving an exceptio
-
Unable to update the VAT_CODE column through supplier sites API
Hi, I'm unable to update the vat code column of the ap_supplier_sites_all table using the ap_vendor_pub_pkg.update_vendor_site API.Oracle application instance 12.1.3 and OS linux.Please find the code below.I'm able to update other feilds,but not the
-
HOW DOES THE NEW MBOX 2 MINI WORK WITH THE MAC MINI?
I have a old original Mac mini 1.25GHz with 1 GB SDRAM - 40GB Ultra ATA drive, 4x SuperDrive (DVD±RW/CD-RW) OS 10.3 I also have just added the new MAC MINI 1.66 CTO OS 10.4 with the following configuration: * Processor 065-6673 1.66GHz Intel Core Duo
-
I did reinstalled the rules why asked me a card sim? I can't do anythig
Hello I would like to know why isn't work my iphone 4 because I juste did the reinstallation of the rules. I though to do the OS that's all. And now I can't do anything is asking me a new sim card because is cloused the sim card. Help me please !
-
Flash with chroma key demo app
Hi I trying use the chroma Key demo app methods for choosing a colour, I have distilled the app down so that i can choose a colour and save the picked colour, the problem i have run into is turning on the LED flash while the app is running, all the m