How to replace a field's search help of DDIC in FPM feeder class?

Hi All,
I want to replace a field's search help in DDIC structure, for an example, in structure HCMT_BSP_PA_XX_R0009, the field BANKL(Bank Keys) has a search help named 'H_BANKL', I want to replace this search help with other one such as 'H_BANKEY' in the FPM feeder class CL_HRESS_PER_DETAIL, I redefined such method:
method if_fpm_guibb_form~get_definition.
field-symbols: <fs_field_description> like line of et_field_description.
call method super->if_fpm_guibb_form~get_definition
importing
es_message = es_message
eo_field_catalog = eo_field_catalog
et_field_description = et_field_description
et_action_definition = et_action_definition
et_special_groups = et_special_groups
ev_additional_error_info = ev_additional_error_info.
read table et_field_description assigning <fs_field_description> with key name = 'BANKL'.
set search help name of field 'bank key'
if <fs_field_description> is assigned.
<fs_field_description>-ddic_shlp_name = 'H_BANKEY'
endif.
endmethod.
I test it and found the search help window was replaced indeed, but all the value of import/export parameters in the new search help was lost, it means, the value of import paramer BANKS(Bank country) and the export parameter BANKA(bank name) were lost. Only the value of BANKL itself can be returned by the new search help window. Can you give me some suggestions about how to maintain the link( value exchange) between structure HCMT_BSP_PA_XX_R0009 and dynamically defined search help 'H_BANKEY' in FPM feeder class?
I tried to use sap memory ID but it doesn't works well.

This question was answered at [Webdynpro Forum|how to replace a field's search help of DDIC in FPM feeder class?;:
That is because for the import and export of DDIC Search help values to work in WDA, not in FPM layer.Feeder Class can do nothing about it.

Similar Messages

How to delete a field from search help which is delivered

hi
I got a requirement to delete a field from search help which is delivered long back
Regards
krishna

Hi
Whether it exists in DEV system or not?
Take the name of that Search Help from PRD/Quality(if it is not there in DEV system) and modify/change it by removing that field from the search help in DEV system and create a Transport request and transport the same request to Quality/PRD systems
Now the New changes (in which the field was removed) will be over written on the old search help in the PRD system, since it is the same Name (search help)
Regards
Anji

Adding new field in search help result view

Dear Experts,
I want to include one more field in search help result. The field shoud give description.
How can i do this in UI result view?
If I try to add attribute in result view, the result view is of type table, and it does not allow us to add value node. It will allow us to add model attribute. If I add attribute in search help resut table view then will i be able to see it in table form.
Thanks and regards
Pankaj Kumar

Hi Pankaj,
Its not that difficult.
There are two ways
1. You can enhance your Result BOL object through EEWB and append your z-field to std. BOL result object. This then appears automatically for your result context node and then you can pull it to the view in config tool.
2. Directly go to your context node class (CN00 , CN01 etc ) , now copy method GET_S_XYZ , paste it and rename as GET_yourfieldname. Similarly copy SET_S_XYZ, GET_M_XYZ and GET_I_XYZ and paste and rename. Once activated. Quit the component browser completely. Open again using bsp_wd_cmpwb. open you view and then your node. You can find you new attribut present as struct.YourField.
You can then copy code from available setter-getter methods for this attribute. You must handle setter getter by urself in this case. In may std. nodes, this is done for description field. I have personally done this for product descripton field.
if you dont want the field to be part of structure ( i.e. as struct.Yourfield ) then you can also copy paste GET_XYZ, SET_XYZ methods. your filed then do not appear as Struct.YourField but it just appears as YourField name under context node.
Hope this helps you.
Thanks & Regards.
You can check PRODUCTDESCRIPTION attribute of BTAdminI node of BT115QIT_SLSQ/Items view of BT115QIT_SLSQ component. They have added it the same way as i described above. You see the GET_ method to see how they are retrieving product description. In my object, i wrote direct query to Comm_prshtext table to retriev short_text by passing product guid and then assigen it to value variable of Get method.
Edited by: suchita P on Sep 20, 2008 2:22 AM

How can we create a Collective search help

Hi all sap experts,
How can we create a Collective search help on field OBJECT which allows to search tables
o ARCH_OBJ
o TOJTB (Search help: H_TOJTB)
on 2 tabs.
Thanks,
Basu

Hi
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Reward points for useful Answers
Regards
Anji

How can we create a Collective search help plz tell me with steps

How can we create a Collective search help plz tell me with steps
thanks,
basu

Hi
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Reward points for useful Answers
Regards
Anji

Extra fields in search help window in Record working time EHP5

Hi Experts,
Can you please let me know how to add additional fields/select options in search help window for Record Working Time ?
My system is EHP5 NW 7.02
I have added the custom search help for the respective filed in table " TCATS_SHLP_ITS".
I can see this table is having entry for only 4 selection options and 6 value fields for search help display.
But in my custom search help programme is having 8 select options(for advance search) and 10 display fields on the search window. It's working from CAT2 transaction but when I am running through webdynpro timesheet, I can only get 4 select options and 6 value fields.
Please let me know how to make the other fields available.
Thanks in advance.
Sonia

Hi Siddharth,
Thanks for your response. In that modify possible entries screen (Details view) I can see the search help is only having 4 select options and 6 display fields.
So as per my understanding max 6 display fields/4 select options can only be displayed on search window.
My requirement is to display more fields on search help OVS window.
Can you please suggest.
Thanks ,
Sonia

F4 help in selection fields of search help

Hi all,
I've created a elementary search help for sold to party and appended it to collective search help.
Now my problem is i need F4 help in one of the selection fields of search help.
How can i get it.
I m using selection method where ive created a view which fetches all data..
Thanks in advance
Palak

Hi,
1)Double click on the dataelement of your field on which you want f4 help then in the first tab itself you will find two option one for attaching the search help you have created(Elementry/ Collective) and second option is the parameter ID.
You have to look for the first option to attach the search help.
2) You can create f4 help for your Parameter or Selection screen by using the event.
AT SELECTION-SCREEN ON VALUE-REQUEST for PARA/Selection screen.
Further you can use the FM mentioned above F4_INT.....
Hope it is clear now.
Vikas Badhan

Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

Hello,
this topic is still a problem for me, does anybody have an idea.
Just to show what's my problem:
Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
That works, the SH's are not shown anymore.
I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
All this can be done modification free by appends.
The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
But I have not found any way to do this modification free.
The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
But I want avoid this modification.
So, is there any way to do this without modifing any of the original SAP SH's ?
Helmut Fischer

How can I call a specific search help from and still get all the tabs

hello
I use F4IF_FIELD_VALUE_REQUEST to display a specific search help from my program. This search help is included in a collective search help, but only the one specified search help is displayed.
Is it possible to call the collective search help and display one specific search help ?
Example: in CRM i have a collective search help BUPA. When F4 is issued from a customer field the search help "Search customer" should be displayed, and not the last search help which was activated - i.e.. "Search employee".
best regards
Peter Christiansen

Hi,
you can try some thing like this..
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
        EXPORTING
          TABNAME           = 'KNA1'
          FIELDNAME         = 'KUNNR'
          SEARCHHELP        = 'DEBI'
        TABLES
          RETURN_TAB        = LT_RETURN
        EXCEPTIONS
          FIELD_NOT_FOUND   = 1
          NO_HELP_FOR_FIELD = 2
          INCONSISTENT_HELP = 3
          NO_VALUES_FOUND   = 4
          OTHERS            = 5.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
Regards
vijay

How to add Value Table or Search Help for a field which is on Standard SAP?

Hi All,
I have a field HERST (tcode IE01) which doesnt have any value table or search Help. I have the same field in a Z table which I should display for the standard screen field in tcode IE01. So Pls suggest me on this.
Thanks in advance.
Regards
Jaker.

Hi, Tamas,
I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
The correct code is like:
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
Xin

How to copy the corresponding values other fields in Search help

Hi All,
My selection screen contains 5 fields. three are obligatory parameters, one date field and one select option.
All are from the same table . I had created search help for one field .
when I'll click the hit list of the search help I want the corresponding values to get copied to other fields in the selection screen, as my hit list contain values for all those fields.
How Can I copy those values.
Please help me on this.

Hi,
Please try this.
In the search help set the export parameter for the other fields also.
Thanks
Naren

How to create SELECT-OPTION in search help (search) field

Hi All,
We have created a search help using Help view as selection method.
But, we want to have a SELECT-OPTION for one of the search parameters. How do we implement the same ?
Regards,
Ashish

hi
try this
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    TABNAME                   = 'YRJEMPDETAIL'
    FIELDNAME                 = 'L_NAME_LOW'
*   SEARCHHELP                = ' '
*   SHLPPARAM                 = ' '
   DYNPPROG                  = 'SAPMZRJ_HELP'
   DYNPNR                    = '9000'
   DYNPROFIELD               = 'LAST_NAME_LOW'
*   STEPL                     = 0
*   VALUE                     = ' '
*   MULTIPLE_CHOICE           = ' '
*   DISPLAY                   = ' '
*   SUPPRESS_RECORDLIST       = ' '
*   CALLBACK_PROGRAM          = ' '
*   CALLBACK_FORM             = ' '
*   SELECTION_SCREEN          = ' '
* IMPORTING
*   USER_RESET                =
* TABLES
*   RETURN_TAB                =
* EXCEPTIONS
*   FIELD_NOT_FOUND           = 1
*   NO_HELP_FOR_FIELD         = 2
*   INCONSISTENT_HELP         = 3
*   NO_VALUES_FOUND           = 4
*   OTHERS                    = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    TABNAME                   = 'YRJEMPDETAIL'
    FIELDNAME                 = 'L_NAME_HIGH'
*   SEARCHHELP                = ' '
*   SHLPPARAM                 = ' '
   DYNPPROG                  = 'SAPMZRJ_HELP'
   DYNPNR                    = '9000'
   DYNPROFIELD               = 'LAST_NAME_HIGH'
*   STEPL                     = 0
*   VALUE                     = ' '
*   MULTIPLE_CHOICE           = ' '
*   DISPLAY                   = ' '
*   SUPPRESS_RECORDLIST       = ' '
*   CALLBACK_PROGRAM          = ' '
*   CALLBACK_FORM             = ' '
*   SELECTION_SCREEN          = ' '
* IMPORTING
*   USER_RESET                =
* TABLES
*   RETURN_TAB                =
* EXCEPTIONS
*   FIELD_NOT_FOUND           = 1
*   NO_HELP_FOR_FIELD         = 2
*   INCONSISTENT_HELP         = 3
*   NO_VALUES_FOUND           = 4
*   OTHERS                    = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
hope this helps
Regards
Ritesh J

How to concatenate fields in Search help exit

Hi,
My requirement is i have to create a search help for a field in cj20n transaction.
when i press f4 on that field i should get a popup of 4 fields from custom table,when user selects any 1 row,
first 3 field values should be concatenated and appear in screen field . in search hlp i added 1 more field so that i can concatenate
all 3 field values and place in it.I can use search help exit so i can concatenate but there are steps like selone,presel etc i am not able to understand .
I saw some examples in wiki, but not able to understand what to do for my requirement.
regards.
Edited by: vnamamala on May 27, 2010 12:22 PM

You would use the step 'SELECT' to control the data selection into an internal table. You would use the step 'DISP' to map the records in the internal table to the search help record table. In your case, I would already have a field in the internal table with the values concatenated together prior to the hit list display (do this in SELECT step) which is not displayed in the hit list but is flagged as the EXPORT field in the search help definition; otherwise just put the field at the end of the hit list.
Map your results in DISP as follows:
*   Map the internal table to RECORD_TAB
    CALL FUNCTION 'F4UT_RESULTS_MAP'
         TABLES
              SHLP_TAB          = SHLP_TAB
              RECORD_TAB        = RECORD_TAB
              SOURCE_TAB        = GT_DOCUMENT
         CHANGING
              SHLP              = SHLP
              CALLCONTROL       = CALLCONTROL
         EXCEPTIONS
              ILLEGAL_STRUCTURE = 1
              OTHERS            = 2.
    CALL FUNCTION 'F4UT_OPTIMIZE_COLWIDTH'
         TABLES
              SHLP_TAB    = SHLP_TAB
              RECORD_TAB = RECORD_TAB
         CHANGING
              SHLP        = SHLP
              CALLCONTROL = CALLCONTROL.

Value is not populating in field through search help f4

Hello Expert,
I have made one field as a search help but data is not populating from popup.
Data is coming from BP_search_help. Here i did not create any search help in se11. not required here.
i used Code in get_p method.
Method GET_P_BP_NUMBER.
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      IF iv_display_mode EQ abap_true.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
      ELSE.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_input.
      ENDIF.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = ' '. "EC NOTEXT
ENDCASE.
ENDMETHOD.
GET_V Method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
        lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
        lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = 'STRUCT.BP_NUMBER'.
ls_map-f4_attr = 'PARTNER'.
APPEND ls_map TO: lt_inmap,lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
        EXPORTING
          iv_help_id        = 'BP_HEAD_SEARCH'                            "#EC NOTEXT
          iv_help_id_kind = if_bsp_wd_valuehelp_f4descr=>help_id_kind_dtel
          iv_trigger_submit = 'X'
          iv_input_mapping = lt_inmap
          iv_output_mapping = lt_outmap
endmethod.
But when i activate get_v method .i am getting 1 error.
Error is
Please help me how to rectify this error and any other way to populate data in field through f4 help.
If u want more detail. Please follow attachment.

Hi Madhuri,
You can refer the below code for search help for partner. The code has to be written on GET_V_XXX method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
         lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
   ls_map-context_attr = 'STRUCT.BP_NUMBER'.
   ls_map-f4_attr = 'PARTNER'.
   APPEND ls_map TO lt_outmap.
   CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
     EXPORTING
       iv_help_id        = 'UIF_BUPAP_WIDE_COL'    ""Search help name
       iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
       iv_trigger_submit = abap_true
       iv_input_mapping = lt_inmap
       iv_output_mapping = lt_outmap.
Thanks,
Ritu

How do we display ALV in Search Help exit

Plz help out !!

You have to program the exit properly to return the value to the field to which the search help is attached. Refer to the following link to find out how to do this: [http://help.sap.com/saphelp_nw70/helpdata/EN/cf/21ee52446011d189700000e8322d00/frameset.htm]
regards,
John.

How to replace a field's search help of DDIC in FPM feeder class?

Similar Messages

Maybe you are looking for