How to resolve patch dependencies on Solaris 8 or 9

Hello,
I need to apply some Solaris patches but these particular patches have other patch dependencies.
Can anyone please advise in which order should I install these patches. I am aware of patchadd will install a
patch(es) but I just need to know the order of installing them?
Thank you.

This forum is for Forms questions. You should ask your question on the appropriate forum.
Regards,
Robin Zimmermann
Forms Product Management

Similar Messages

How to resolve "getPooledConn: No more connections in the pool for Host"

I am using the wl9.1 proxy in a SunOne WebServer 6.1 (solaris), and I regularly get this error:
getPooledConn: No more connections in the pool for Host
I found several postings with this error, but no reactions on how to solve this.
in the proxy log, I see this info:
================New Request: [wls-app/page.do] =================
Tue Nov 13 13:05:30 2007 <18781194955530286> CookieName is deprecated and replaced by WLCookieName
Tue Nov 13 13:05:30 2007 <18781194955530286> Uri as read from rq (request) data structure /wls-app/page.do
Tue Nov 13 13:05:30 2007 <18781194955530286> Uri after pathTrim /wls-app/page.do
Tue Nov 13 13:05:30 2007 <18781194955530286> Uri resolved to /wls-app/page.do?page=messages
Tue Nov 13 13:05:30 2007 <18781194955530286> resolveRequest return code is [0]
Tue Nov 13 13:05:30 2007 <18781194955530286> URI=[wls-app/page.do?page=messages]
Tue Nov 13 13:05:30 2007 <18781194955530286> INFO: SSL is not configured
Tue Nov 13 13:05:30 2007 <18781194955530286> Found cookie from cookie header: wlsappCookie=H5TccKpNWGqfnvv2wG1znjmJkqNhMyhct0h93HDgfGnc7phpkdxW!-1488879380!864729474
Tue Nov 13 13:05:30 2007 <18781194955530286> Parsing cookie wlsappCookie=H5TccKpNWGqfnvv2wG1znjmJkqNhMyhct0h93HDgfGnc7phpkdxW!-1488879380!864729474
Tue Nov 13 13:05:30 2007 <18781194955530286> getpreferredServersFromCookie: [-1488879380!864729474]
Tue Nov 13 13:05:30 2007 <18781194955530286> primaryJVMID: [-1488879380]
secondaryJVMID: [864729474]
Tue Nov 13 13:05:30 2007 <18781194955530286> No of JVMIDs found in cookie: 2
Tue Nov 13 13:05:30 2007 <18781194955530286> Trying to locate Primary or Secondary using SrvrInfo with JVMID: -1488879380
Tue Nov 13 13:05:30 2007 <18781194955530286> getPreferredFromCookie: Found Primary 10.0.0.102:8514:0
Tue Nov 13 13:05:30 2007 <18781194955530286> Trying to locate Primary or Secondary using SrvrInfo with JVMID: 864729474
Tue Nov 13 13:05:30 2007 <18781194955530286> getPreferredFromCookie: Found Secondary 10.0.0.101:8514:0
Tue Nov 13 13:05:30 2007 <18781194955530286> getPreferredFromCookie: Found 2 servers
Tue Nov 13 13:05:30 2007 <18781194955530286> attempt #0 out of a max of 5
Tue Nov 13 13:05:30 2007 <18781194955530286> trying connect to PRIMARY '10.0.0.102'/8514/0
Tue Nov 13 13:05:30 2007 <18781194955530286> getPooledConn: No more connections in the pool for Host[10.0.0.102] Port[8514] SecurePort[0]
Tue Nov 13 13:05:30 2007 <18781194955530286> INFO: New NON-SSL URL
Tue Nov 13 13:05:30 2007 <18781194955530286> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Tue Nov 13 13:05:30 2007 <18781194955530286> EINPROGRESS in connect() - selecting
Tue Nov 13 13:05:30 2007 <18781194955530286> Local Port of the socket is 64242
Tue Nov 13 13:05:30 2007 <18781194955530286> Remote Host 10.0.0.102 Remote Port 8514
Tue Nov 13 13:05:30 2007 <18781194955530286> created a new connection to preferred server '10.0.0.102/8514' for '/wls-app/page.do?page=messages', Local port: 64242
Tue Nov 13 13:05:30 2007 <18781194955530286> WLS info : 10.0.0.102:8514 recycled? 0
Tue Nov 13 13:05:30 2007 <18781194955530286> Adding header for WLS 'WL-Proxy-Client-Cert: ###
---removed client cert info---
Tue Nov 13 13:10:30 2007 <18781194955530286> *******Exception type [READ_TIMEOUT] (no read after 300 seconds) raised at line 205 of Reader.cpp
Tue Nov 13 13:10:30 2007 <18781194955530286> caught exception in readStatus: READ_TIMEOUT [os error=0, line 205 of Reader.cpp]: no read after 300 seconds at line 822
Tue Nov 13 13:10:30 2007 <18781194955530286> PROTOCOL_ERROR: Backend Server not responding - isRecycled:0
Tue Nov 13 13:10:30 2007 <18781194955530286> *******Exception type [PROTOCOL_ERROR] (Backend Server not responding) raised at line 842 of URL.cpp
Tue Nov 13 13:10:30 2007 <18781194955530286> got PROTOCOL_ERROR exception in sendRequest phase at line 1364; Msg: PROTOCOL_ERROR [line 842 of URL.cpp]: Backend Server not responding
Tue Nov 13 13:10:30 2007 <18781194955530286> request [wls-app/page.do?page=messages] did NOT process successfully..................
Does anyone know how to resolve this issue ?
Thanks,
Cappaert Luc

We are seeing a similar connection pool error captured in the WL proxy log doing load testing. Is there an answer to this question of how to increase this pool size?
Fri Jan 16 14:59:02 2009 <535212321359422334> Trying a pooled connection for '191.228.175.226/7003/0'
Fri Jan 16 14:59:02 2009 <535212321359422334> getPooledConn: No more connections in the pool for Host[191.228.175.226] Port[7003] SecurePort[0]
Fri Jan 16 14:59:02 2009 <535212321359422334> general list: trying connect to '191.228.175.226'/7003/0 at line 1319 for '/SIT-cccpol/PTGadget/SetCookies.jsp'
Fri Jan 16 14:59:02 2009 <535212321359422334> INFO: New NON-SSL URL
Fri Jan 16 14:59:02 2009 <535212321359422334> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Fri Jan 16 14:59:02 2009 <535212321359422334> EINPROGRESS in connect() - selecting
Fri Jan 16 14:59:02 2009 <535212321359422334> Local Port of the socket is 2097
Fri Jan 16 14:59:02 2009 <535212321359422334> Remote Host 191.228.175.226 Remote Port 7003

How to resolve multiple declaration error in libraries

Hi All,
I have one C Application, it links to two libraries. There is one variable with same name defined in two different libraries. These two libraries are third party libraries and i don't have access to their source code.
Compiler gives multiple declaration of same variable error.
Please let me know how to resolve this error.
Thanks in Advance.
Regards,
Vasu

Please, show your compilation line as well as error that you get.
Are these static or shared libraries?
Are we talking about Solaris here?
regards,
Fedor.

How to configure network settings in solaris 10

hi
i have downloaded solaris 10 and installed on dell dimension desktop,as i have gone through the instalation guide,i see i dont get netwotk configuration (DNS,DHCP.....)settings during installation,it havent asked me about those settings,It just asked the host name ..after installation i see no network connection even i have my cable connected.ethernet cable connected Its INTEL
can anyone help me how to resolve this issue

You could try the Dell site, but I doublt if they will have a driver for Solaris, Linux maybe but not Solaris. Otherwise try the DriverGuide web site. http://www.driverguide.com/
You could also try installing OpenSolaris if you don't specifically need Solaris 10. Better chance that OpenSolaris will support the NIC.

How to resolve Agents with pending URL changes

Greetings,
I have run the EMDIAG tool against my 12c OMS and one section of the results hows thie following -
7001. Agents with pending URL changes
LAST_EMD_URL
EMD_URL
https://lepisma.ucdavis.edu:3872/emd/main
https://lepisma.ucdavis.edu:1830/emd/main
1 row selected.
verifyASLM
======================================================================
On this host ./emctl status agent returns -
Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Agent Version : 12.1.0.1.0
OMS Version : 12.1.0.1.0
Protocol Version : 12.1.0.1.0
Agent Home : /usr/local/oracle/product/agent12g/agent_inst
Agent Binaries : /usr/local/oracle/product/agent12g/core/12.1.0.1.0
Agent Process ID : 44637
Parent Process ID : 44555
Agent URL : https://lepisma.ucdavis.edu:3872/emd/main/
Repository URL : https://oracle-emrep1.ucdavis.edu:4904/empbs/upload
Started at : 2013-04-20 16:09:06
Started by user : oracle
Last Reload : (none)
Last successful upload : 2013-04-22 13:34:14
Last attempted upload : 2013-04-22 13:34:14
Total Megabytes of XML files uploaded so far : 134.96
Number of XML files pending upload : 1
Size of XML files pending upload(MB) : 0.03
Available disk space on upload filesystem : 62.49%
Collection Status : Collections enabled
Last attempted heartbeat to OMS : 2013-04-22 13:34:11
Last successful heartbeat to OMS : 2013-04-22 13:34:11
Agent is Running and Ready
Examinig the emd.properties file shows no entry for https://lepisma.ucdavis.edu:1830/emd/main and ./emctl config agent listtargets only shows the following for oracle_emd -
[lepisma.ucdavis.edu:3872, oracle_emd]
This was recently upgraded from 11g and prior to the upgrade there were difficulties patching this agent. Because of that it was reinstalled in 12c. I have no clue what is causing the issue let alone how to resolve it. Any suggestions are greatly appreciated.
Thank you.
Bill Wagman

It's ok to have 11g agent and 12c agents up and running simultaneously and we do it all the time during migration from one to the other since they have to run on different ports (12c checks this at install ONLY IF the 11g agent it up and running when the 12c agent is being pushed out to the host).
Also, if EMDIAG is the only place you see 1830 port being reported, it may be becuase its doing a search for any agents currently installed on the server. So if you still have both the 11g agent and 12c agent installed, this should not be an issue that it it reporting that URL/port with 1830 for the 11g agent. Since you can't upgrade 11g agents to 12c, (its required to do a new install of 12c agent) you have to do a complete uninstall of the 11g agent first from the OEM 11g gui console, then at the inventory level where the inital 11g agent was installed, than you may still need to manually remove that 11g directory if your runInstaller did not remove it once its "uninstalled".
Edited by: ora6dba on Apr 25, 2013 7:24 AM

How to resolve database PSU conflict errors

Hello:
I am in process of applying the database PSU Patch 18522512 for 11.2.0.3 and running into conflict issues with other patches, please take a look at the following conflict issues and let me know how to resolve these conflict issues and installed the PSU patch 18522512.
/cherdb_1/oracle/VIS12/11.2.0/PATCHES/PSU/18522512
cheron.aarcorp.com:(oracle):> opatch apply
Oracle Interim Patch Installer version 11.2.0.3.6
Copyright (c) 2013, Oracle Corporation. All rights reserved.
Oracle Home       : /cherdb_1/oracle/VIS12/11.2.0
Central Inventory : /vol01/app/oraInventory
from           : /cherdb_1/oracle/VIS12/11.2.0/oraInst.loc
OPatch version    : 11.2.0.3.6
OUI version       : 11.2.0.3.0
Log file location : /cherdb_1/oracle/VIS12/11.2.0/cfgtoollogs/opatch/opatch2014-08-06_10-59-59AM_1.log
Verifying environment and performing prerequisite checks...
Composite Patch 18522512 is a bug superset of 16929165,16992075,17468141,13001379,14123213,13931044,9858539,8547978,14237793,14207902,13923995,13544396,13528551,13499128,13477790,13466801,13366202,13259364,13070939,13036331,12971775,12845115,12780983 in OH.
Composite Patch 18522512 conflicts with installed patch(es) 17875948, 16040940, 19078951, 17693770, 17912217, 13004894, 14649883, 12942119, 16438289, 13040331, 17600719, 13146719, 18116376
Conflict Description:
Here are the specific sub-patches of composite patch 18522512 that conflict with 17875948, 16040940, 19078951, 17693770, 17912217, 13004894, 14649883, 12942119, 16438289, 13040331, 17600719, 13146719, 18116376
Sub-Patch 13696216 conflicts with 19078951 conflicts with 18116376
Sub-Patch 13923374 conflicts with 19078951
Sub-Patch 16056266 conflicts with 19078951
Sub-Patch 16619892 conflicts with 19078951 conflicts with 17912217 conflicts with 17875948 conflicts with 17600719 conflicts with 16438289 conflicts with 13004894
Sub-Patch 16902043 conflicts with 19078951 conflicts with 17875948 conflicts with 12942119 conflicts with 13146719 conflicts with 13040331
Sub-Patch 17540582 conflicts with 19078951 conflicts with 17693770 conflicts with 14649883
Sub-Patch 18031683 conflicts with 19078951 conflicts with 17875948
Sub-Patch 18522512 conflicts with 19078951 conflicts with 16040940
Conflict Remedy:
Refer to My Oracle Support Note 1299688.1 for instructions on resolving patch conflicts.
UtilSession failed: Composite conflicts with existing oneoffs.
Log file location: /cherdb_1/oracle/VIS12/11.2.0/cfgtoollogs/opatch/opatch2014-08-06_10-59-59AM_1.log
OPatch failed with error code 73
Thanks & appreciated for your help.
Syed.

Hi Syed,
You can raise SR for merging the conflict patches and refer to the MOS document provided to resolve.
Thanks,
Uday

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

How to resolve #Multivalue Error

HI All,
I have a data like below, in this for inpatient data is NULL and as per business requirement if data is null then "0". so i create a variable and drag into inpatient's total column
statement for inpatient is
=If IsNull([total]) Then 0 Else [total] Where ([items]="Inpatient")
items total
Office
4
Utilization
70
Inpatient
it is working and showing as "0"
but when inpatient has value it is showing #multivalue"
Office Visits
4
Non-Emergency ED Utilization
70
Inpatient Stays
40
how to resolve is issue
Please reply i am using SAP BO 3.1 INFOVIEW
Thanks in advance
Ranjeet

Hi Ranjeet,
First thing is you are getting this error because of the where clause used in the variable.
Because in the 2nd case when it has value for Inpatient, it is actually taking the same value for all the 3 cases.
How to remove null value with 0:
1. Remove where clause from the variable and use that variable in place of Total in the table report.
2. Use format number option to place 0 in place of undefined values.
Hope it helps. Please ask if you have any queries.
Regards,
Subrat

TS1702 Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

Does anyone know how to resolve the problem of apps not being able to download in the App Store? After the IOS 6 update I haven't been able to download any apps.

Maybe here:
IOS 6 App store crash: Apple Support Communities

When i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?

when i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

How to resolve many-to-many join by 2 one-to-many joins

Hi,
I was asked many times how to resolve many to many relationship between two tables. I read to use 2 one -to- many relationships to resolve this. Can some expalin me when many to many relationship occurs between two tables and how to reslove them with practicle examples. Is there any article on this?
Regards,
Nanda Kishore

Hi,
Please check below link.
http://www.forumtopics.com/busobj/viewtopic.php?p=859029&sid=20d79e3df07b0d8b41aadfbd902bb6b2
http://blog.oaktonsoftware.com/2011/04/bridge-tables-and-many-to-many.html
Thanks,
Amit

How to resolve a host name from IP using JNDI/DNS service provider

Hi
I got two questions on JNDI/DNS service provider:
1) How to resolve a host name when i got an IP
I understand How I do it inverse.
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory");
env.put(Context.PROVIDER_URL, "dns://"+server+"/"+domain);
DirContext ictx = new InitialDirContext(env);
Attributes attrs1 = ictx.getAttributes(host, new String[] {"A"});
2) This example above works when I specify the domain in the provider url.
If I am not specifing a domain but only the dns server I got an NameNotFoundException.
What should I do if I don't got the domain?
get the availible domains and loop on them?

Hi,
if your DNS server supports that, you can do a reverse DNS lookup. This works as follows:
String server = "your.dns.server";
String domain = "in-addr.arpa";
String ip = "4.3.2.1";
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory");
env.put(Context.PROVIDER_URL, "dns://" + server + "/" + domain);
DirContext ictx = new InitialDirContext(env);
Attributes attrs1 = ictx.getAttributes(ip, new String[] {"PTR"});1: Use the pseudo-domain in-addr.arpa
2: Use the reverse IP address for lookup, i.e. if your host has 1.2.3.4, use 4.3.2.1!!
3: Request the PTR attribute
see also [http://en.wikipedia.org/wiki/Reverse_DNS_lookup|http://en.wikipedia.org/wiki/Reverse_DNS_lookup]
Martin

How to resolve this Error ORA-04030: out of process memory when trying to a

Hi
I am connecting as a sysdba and trying to execute a query on the V$Logmnr_contents but getting the following Error
ORA-04030: out of process memory when trying to allocate 408 bytes (T-LCR
structs,krvuinl_InitNewLcr)
Can anyone guide me how to resolve this issue.
Thanks

Hi,
As root user, edit the /etc/sysconfigtab file, and try to set the udp_recvspace parameter to 262144 and reboot the machine :
inet:
udp_recvspace = 262144
Metalink note 297030.1 Ora-04030 During Execution Of LogMiner Query
Nicolas.

How to resolve the error -1073807339 when using Agilent LAN/GPIB Gateway (E5810A)?

Dear Sir/Madam,
Appreciate that you could advise me on the following error occur when connect power meter E4419B to computer via E5810A LAN/GPIB Gateway(remote interface) & run with Labview:
-1073807339
VISA Write in E4419_read_power.vi
I have added 5s timeout to Labview program but the result as previous.
There no error occurs when the power meter to computer via USB/GPIB interface(82357B).
Is it related to E5810A driver or the program I wrote?
How to resolve it?
Attachments:
E4419_read_power.vi ‏16 KB

Hi.
I'm experiencing the same problem when connecting a laser controller (New Focus Vortex TLB-6000) via the Agilent E5810A to a PC.
There are no problems when connected through a regular serial port, but timeouts arise every few seconds through the E5810A. I have another controller (SRS LDC501) which works very well with a second Agilent console.
Have you managed to find a solution to this problem?
Thanks,
Orel.

How to resolve patch dependencies on Solaris 8 or 9

Similar Messages

Maybe you are looking for