How to respond to a special post in a thread?

Need HELP.
I don't know how to place my reply to a certain post within a thread(marked as >in response to: name).
Answer would be appreciated.

Hello and good morning-about five o'clock!
Hope everything is okay.Used helpful and solved!
Got a distorted desktop again-seems to be somewhat unformatted,text only screen(arrow next to reply as text colon),site map on the bottom, and so forth.A bug?Shall run Norton for my own sake.
ali b, as you see,you can post directly(sorry to use my own!) under a post,just as before.
Just for unknown reason, when I clicked reply at the post,adress and number showed up(a hidden link?)
In other threads I have seen this kind of posting just beyond someones post-you can see this on the time of posts. Some latest posts were in the middle instead of bottom.
Thanks again-10 to 10 seems equal!

Similar Messages

  • Special Posting Periods

    Hi,
    Pls. tell me abt. special posting periods, how to open and close special posting periods.
    Regards
    syed.

    Hi
    Special posting periods are used for adjustment postings after the year end.You can use T.code OB52 to open and close any posting periods in FI.
    For more details check out:
    http://help.sap.com/saphelp_47x200/helpdata/en/96/8b2fef43ce11d189ee0000e81ddfac/frameset.htm
    Assign points if helpful
    Regards
    Aravind

  • How to use the code posted in the thread

    Quick question. How do i use the code posted in the threads, because when I copy and past in the program it is not formatted well.
    Per example : In the below link there is some code which i want to use, but when i copy and paste in the ABAP editor i get lot of syntax errors.
    Re: BDC
    Thanks.

    Shiva,
    I dont think you can do much about this because the code which you mentioned in that thread should have been kept using markup 
    Thanks
    Bala Duvvuri
    Edited by: Bala Duvvuri on Jul 15, 2010 7:29 PM

  • Consolidation in special posting period

    Hi All,
    I am using the Fiscal year variant April to March with 4 special posting periods in ECC. I am using the same in BCS too.
    I am taking the data through LFDS with posting period move.
    I am using quarterly consolidation which is period 3, 6, 9 and 12. However I have balances appearing in special posting periods 13 - 16 in source cube. My first consolidation is happeing for period 12. 2008
    How do I take care of the transactions posted in Sepcial posting periods 13 - 16.
    1. Should I be running the COI in period 16 too. Should I be running it as subsequent consolidation or make period 16 itself as first consolidation.
    2. I am also thinking of making the changes in the source cube 0FIGL_C10 with an additional field called consolidation posting period and write a routine to update additional period field as 12 wherever the posting period is 13 to 16. Then extract the data into BCS for period 12 and have only consolidation frequency till period 12. Can I proceed with this approach ?
    Pl give a standard and correct approach to be followed in case of special posting periods considering all the above facts.
    Thanks in advance
    Srinivasan

    Hi Srinivasan,
    1. Should I be running the COI in period 16 too. Should I be running it as subsequent consolidation or make period 16 itself as first consolidation.
    - I don't think that you should.
    2. I am also thinking of making the changes in the source cube 0FIGL_C10 with an additional field called consolidation posting period and write a routine to update additional period field as 12 wherever the posting period is 13 to 16. Then extract the data into BCS for period 12 and have only consolidation frequency till period 12. Can I proceed with this approach
    - I like the idea.
    Pl give a standard and correct approach to be followed in case of special posting periods considering all the above facts.
    - Didn't see such written approaches and doubt that they exist.

  • How to respond to IOCTL_MOUNTDEV_QUERY_UNIQUE_ID?

    Hi all!
    I am developing a driver which implement a virtual disk. I am trying to notify MountMgr that a new volume arrive when the volume is mounted. MSDN tell me that I can send MountMgr an IOCTL named IOCTL_MOUNTMGR_VOLUME_ARRIVAL_NOTIFICATION to compete it.
    I do so, and MountMgr send to me some other IOCTLs. MSDN says, the most important IOCTL is IOCTL_MOUNTDEV_QUERY_UNIQUE_ID. My driver can elect to ignore others, but must provide an unique ID as the response of it.
    But I find that the input length of this IOCTL is just 4, equal to sizeof(MOUNTDEV_UNIQUE_ID). MSDN says the struct MOUNTDEV_UNIQUE_ID has two member: 
    USHORT UniqueIdLength;
    UCHAR UniqueId[1];
    I think member UniqueId is a variable size string. Length of it should be more than 4. So I write the code below as response:
    status = STATUS_BUFFER_OVERFLOW;
    Irp->IoStatus.Information = need_len;
    The variable need_len is equal to the summarize of the length of my ID string and size of USHORT, that is 2. But MountMgr send this IOCTL with same length buffer again. I don't know how to respond this IOCTL. Should I ignore this length limit and copy my
    ID to AssociatedIrp.SystemBuffer directly? I think if I do so, the pool will be corrupted. The system will come into BSOD, isn't it? If I do nothing, I find the system will come into a wired mistake after a while. What should I do?
    I hope someone could be kind to help me. Thank you!
    Best regards!
    whiteclouds

    When you have one of these calls, you should return STATUS_BUFFER_TOO_SMALL since that is the error indicating that the buffer needs to grow.  For device driver questions, you should really be asking this on the WDK forum
    https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?forum=wdk
    Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com
    1. STATUS_BUFFER_TOO_SMALL can't work. I try to set status as it and return, system come into BSOD, windbg tell me the pool was corrupted.
    2. Sorry, before I post my message, I hadn't find here isn't the correct forum. I will post my message at WDK forum again.

  • Asset Depreciation fun in special posting period

    Dear Gurus,
    Recently my Finance Manager decided to hv a cut-off date for all the FI transaction on 14-Dec-2007.
    These are the rules:
    1.) All the FI transaction < 14-Dec-2007 posted in period 12
    2.) All the FI transaction Between 15-Dec-2007 and 31-Dec2007 will be posted in special posting period 14.
    3.) All year-end adjustment will be carried out in posting period 16.
    My problems are:-
    1.) How can i proceed the Asset depreciation run for period 12 and special period 14.
    2.) How the system select or capture the asset doc? By posting date or by posting period?
    3.)If possible pls give some examples when we should use these options and what are the advantages?
       a.) Planned posting run.
       b.) Repeat
       c.) Restart
       d.) Unplanned posting run.
    Thanks.
    Lim J

    1.) How can i proceed the Asset depreciation run for period 12 and special period 14.
    Hi, First of all you need to understand the function of special period.  You need not to mention the spl period of depr. run.
    The system considers period 12 as usual.
    2.) How the system select or capture the asset doc? By posting date or by posting period?
    By posting date.
    3.)If possible pls give some examples when we should use these options and what are the advantages?
    a.) Planned posting run.
           When you run the depr. on regular peiod basis ie., one by one, U choose (a)
    d.) Unplanned posting run.
          When you want to calculate the depr. for some periods as a whole, U choose (d)
    b.) Repeat
         Suppose u ran the depr for Jan.  In Feb. you have capitalised an asset for Jan. So, U have to calculate depr for the new asset for jan.   U choose (b).
    c.) Restart
           When you are running depr. you might have face some uncontrollable problems like power off, server down etc.  In such instances, you choose (c).
    Get back to me. if you are not clear
    Regards ...............SK

  • Special posting period

    Hi sap guru's,
    i have one doubt regarding posting period.
    when we define posting perod and there when we create open & close posting period , in there we have to maintain posting normal period as wel as special posting period for entering closing data for same fiscal year.
    if we going for V3 fiscal year variant and it is from april to march. so entry posted in the special period for rectification purpose.
    my problem is in special posting period from and to column.
    again i mention that my fiscal year variant is standart V3 i maintain period for yearly basis my normal posting period from i enterd 2008 and to period i enterd 2009.
    so what i maintain in special posting period from and to column means which year i maintain and why?
    <removed_by_moderator>
    regards,

    Please maintain like this:-
    From Period - 13 year 2007 To Period -16 Year 2007
    Or You can use 13 to 13,
    then 14 to 14
    then 15 to 15
    then  16 to 16
    The no of times you take P/L And B/S and you are posting in the above speacial period and make entries as per your Auditor's observation.
    Regards,
    Alok

  • CIN: How to check the material document posted without excise invoice

    Hi Guru,
    Please advise how to check the material document posted without excise invoice.
    I have tried tcode J1I7 but it seems start to collect the excise invoice first and then material document.
    But my case is to find the material document WITHOUT excise invoice for internal tracking purpose.
    At the moment we start from tcode MB51 to get the list of material document and check in J_1IEXCHDR / J_1IEXCDTL
    Best regards,
    Pakorn

    Hi,
    Try creating a Query in Tcode SQVI by combining tables MKPF and J_1IEXCHDR/J_1IEXCDTL for your requirement.
    Check these threads how to create Query.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6018c1ae-8c44-2d10-6ea9-c3fad2c82880?QuickLink=index&…
    http://ptgmedia.pearsoncmg.com/images/9780672329029/samplechapter/0672329026_CH03.pdf
    Regards
    Binoy

  • How can i remove the special characters from my keyboard on my iphone3gs

    how can i remove the special character from my keybord keys on my iphone 3gs

    What characters are you talking about exactly and why would you want to remove any?
    There is really no way to modify Apple's keyboards or add your own in iOS, but there are some apps that may provide a work around.

  • Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

    Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • How to clear G/L account posting made through MM documents/movements

    Hi Gurus,
    How to clear G/L account posting made through MM documents/movements.
    This is issue related to open item clearance .I want to clear all MM related postiongs happened through MM movements.( From PO,invoice etc)
    Regards,
    nitin

    Hi,
    Only GR/IR account is maintained as open item management. use t-code f.19 or f.13
    Regards,
    Sreekanth

  • How to update profit center in posted document without profit center ?

    HI,
    I want to know,
    How to update profit center in posted document without profit center ?
    So that i can get my profit center accouting report proper.
    Thanks
    Nilesh

    There is a long story about profit center accounting. I assume you are using Classic PCA, this means you can see the PCA documents.  And the solutions is below:
         For P/L account, even you don't maintain cost element for it, if you maintain the profit center in the application (Frontend transaction), then PCA line items will be generated for this account.
        For B/S account,  if you maintain the default Profit Center with transaction 3KEH/3KEI, the PCA line items will generated for this account also.
      Hints, don't maintain default profit center for AR/AP accounts, these accounts to be treated in periodic processing.
      First, calculate the distribution/adjust by F.5D, then transfer it by 1KEK. for others account rather than AR/AP, use F.5E
    For you case, if this account is P/L account, but you don't maintain profit center in the transaction, you can maintain default profit center as B/S account in 3KEH and 3KEI, then transfer it subsequently by transaction 1KE8.
    Good Lucky!
    Flex Yang

  • How do i make a template (poster) of this sizes 3.74in x 8.27in?

    How do i make a template (poster) of this sizes 3.74in x 8.27in?

    Inspector, Document tab
    Page Setup
    Click in the Paper Size box and choose Manage Custom Sizes
    Click the + to make a new custom setting
    Name it
    Type in the  dimensions
    Hit OK
    That gets the size you want.  Save as a template.

  • How to respond on my iPhone when it disabled?

    How to respond on my iPhone when it disabled?

    You don't.  It's disabled.  You need to re-enable it.  What have you done to re-enable it?

  • What's a loss how to respond when iPad?

    What's a loss how to respond when iPad?

    I'm afraid your question makes no sense. perhaps if you rephrase

Maybe you are looking for