HOW TO Restrict Absence Type LOV Self Service in 12.1.3

Hi All,
Will someone please inform of whar is the package to use for this new feature restriction as stated below. Thanks.
From new feature PDF 12.1.3:
3.26.4.6. Restrict Absence Type LOV
Prior to this release, all absence types created using Oracle HRMS are displayed to users in Self-Service HR. With this release, implementers can update ""a package"" to restrict the absence types that are displayed to users based on the business requirements. This feature ensures that employees enter only those absences for which they are eligible, and managers do not have to verify the validity of the absence type of employee requests.

Apologies for the delay here.
The package in question is hr_absence_restricted. You replace the Package Body of this package so that the function absences_restricted returns a comma-separated array of Absence Type ids that SHOULD NOT be displayed.
For example,
RETURN '123, 456, 789'
Would prevent Absence Type Ids 123, 456 and 789 from appearing in the user's List of Values. This is supposed to be described in the following Oracle Article but it's not published:
Oracle Article How To Restrict Absence Type LOV in Oracle Self-Service Human Resources (Doc ID 1122674.1)

Similar Messages

How can we change Absence Type LOV in Create mode not in search in SSHR

Hello,
My requirement is to Restrict Absence Type LOV at the time of applying the leave in Self Service. For that i have used hr_absence_restricted.absences_restricted.
After changing this package Its working fine at the time of applying leave.
But in search i want to display all kind of leaves, But its restricting serach Absence Type LOV as well.
Thanks in advance,
Sheetal

Hi,
have extended contoller instead of VO for the same. Its working fine now.I have Used the code in controller as shown below:
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0,81);
vo.setWhereClause("ABSENCE_ATTENDANCE_TYPE_ID not in "+strAbsType);
vo.executeQuery();
Thanks,

How to Restrict Material Type in MM01 ?

*Hi experts,*
*How to restrict material type ? i wanted to restrict the end-user not to access any other material types than Raw material,Semi-finished goods. it means when end user trying to create material then if he enters other than these two material types then he should get error saying that "your not authorized to select that xyz material type".*
*I have tried to restrict the object M_MATE_MAR(Material Master : Material type) but am unable to do so. is there any other object which take care of Material types ? did i selected correct object or not??*
*can anyone help out.*

Hi,
You have to make few configuration settings before you actually restrict at the object level. The solution is clearly discussed in the below thread:
how to restrict material master by material type t-code MM01
Hope this helps!!
Regards,
Raghu

Viewing/modifying Extra information Types from self service

Hi, Is it possible to mody extra information types from Self Service and does anyone know where I can find setup documents?

check this - http://oracleappssol.blogspot.co.uk/2012/08/creating-extra-information-types-as.html

How to retrieve absence type(removal of HR_API_TRANSACTION_VALUES in R12)?

Hi,
Read the note 733287.1 and notice that the table HR_API_TRANSACTON_VALUES has been removed in R12. And the transaction data is keep in column TRANSACTION_DOCUMENT of HR_API_TRANSACTIONS table.
We have several package that retrieve the PER_ABSENCE_ATTENDACE_TYPE from HR_API_TRANSACTION_VALUES tables. However, we are not able to query the info in R12 now. This is applicable for leave application via the Self Service Module.
Would like to seek advise whether how to retrieve the absence attendance type in the Self Service Module in R12?
Thanks in advance.
Regards,
SC

Hi,
Yes, the tansaction data is stored in transaction_doucment column of table hr_api_transactions in R12 as XML data
You can get the ABSENCE_ATTENDACE_TYPE details from the follwoing tables:
1> HR.per_absence_attendance_types
2>per_abs_attendance_types_tl
Thanks,
Kumar

How to enable fnd log in self service page

Hello,
In professional forms, we can enable fnd log using the profile options "FND: Debug Log Enabled" to Yes and "FND: Debug Log Level" to different levels.
Similarly, can we do the same with Self Service page? how and where can i see the log results? Also when i'm running the selfservice page from jDeveloper, is there any possibility to see the entire log?
I need to track why i'm unable to run a page from jdeveloper and i need to track the log.
Thank you all for the help in advance.
kK

Hi,
To Enable to Log for a self service page click on 'Diagnostics' link avaible at the Upper Right corner of the page. Now from the Diagnostic poplist select the 'Show Log On Screen' then select the log level and save.
Now you perform your fucntional steps all the log messages you will be able to see at the bottam of the page.
Regards,
Syed.

How To Display Error Message In Self Service Page

Dear All,
I am using 11.5.10 Oracle HRMS self Service ,,,
How can I display error message on the top of the self service page if some action happen ?
Best Regards

Time entry rules maybe?

How to restrict document types in hierachy

Hi
My scenario is
For DIR of document type A only DIRs of document type B and C should be attached in the document hierarchy. How to restrict the user from attaching other type of documents?
What will be the best solution for this scenario?
Thanks in advance
Prasad K

Hi
Plz
Any inputs on this?
Regards
Prasad

How to restrict Order types KA and AB in script output form

How to restrict KA AND AB order types in script output data is coming from bkpf-blart .
program is rfkord10.
and form is f140_acc_stat_1
in script output i dont want to display KA AND AB order types ..
data is coming from standard report.
i copied form into zform.
in output it is displaing all order types ..
is there any solution to restrict above order types.

Hi
Check the data structures used in the script
Since it is account statement of customer it uses the Tables BSID and BSAD in which the field BLART field is there whose values are KA and AB
check for the structures which are used in the script and in them search for the field BLART in Se11 and accordingly keep the condition
It will work
Regards
Anji

How to customise existing pages using self service framework

Hi,
I am trying to customise the existing pages in internet expense module in oracle applications 11.5.9. I have taken an approach to use AK developer and Self Service Web Application Manager.
I have created a new web inquiiry using these two. But unable to modify the existing pages. Unable to decipher the existing flow of pages - regions and how the attributes are laid out.
Any help in this regard will be highly appreciated.

I'm having the same problem too in trying to decipher the flow of processes and pages. Have you had any luck since you last posted this message? Please let me know if you have. Thank you.
Hi,
I am trying to customise the existing pages in
internet expense module in oracle applications
11.5.9. I have taken an approach to use AK developer
and Self Service Web Application Manager.
I have created a new web inquiiry using these two.
But unable to modify the existing pages. Unable to
decipher the existing flow of pages - regions and how
the attributes are laid out.
Any help in this regard will be highly appreciated.

How we restrict the TECO fucntion without service entry sheet for PM03 cont

Dear PM Guru's.
one of my client asking to restrict the TECO function if there is no cost in order either by external service cost or internal service cost? If user raise an order for one external activity , he not created the service entry sheet against PO and he did TECO of the order, when FI people settles the cost system showing either order is already settled or there is nothing to settle. Please guide me how to restrict the user to do the teco function in order. Its very crucial and urgent for me. if any one have solution please update it immediately.
regards
Jalu

IWO10004 Maintenance order: Customer check for order completion
Use the above user exit to check the cost for the order. If there is no cost, then give error message.
You can check tables PMCO and AUFK.
Also you can use function module PM_WORKORDER_COSTS_LIST to retrieve the actual cost values.

How to restrict change type in CC31

Hi ,
I have a new requirement in which I need to restrict change types in txn CC31 (Create ECR).onlya set of people should create a ECR with one change type and another set of ppl with another change type, but I am not able to find any auth object with the field CCART(Change types) to provide these restrictions .
Is creating a new auth object the only way ? please let me know if there is any other possibility or any other auth objects which can be used for the same ?
Thanks,
Nanda

Fields of such types (e.g. document types, master data accounts, etc) are often not the same field name that you are looking for in an authorization object, but rather grouped in their master records and the authority-check is against the assigned group value.
More often than not, if no group value is assigned to a record then no check is made.
So what you can try to look for is a BEGRU type field of an object in the code and look to see where it is gettings its value from.
Might be worth a try...
Cheers,
Julius

How to restrict Asset Books LOV in the Asset creating work bench

Currently when users try to create Assets, they are able to see all the Corporate Books in the Book field. We want to restrict this LOV to show only book/s relevant for that Operating Unit.
Regards,
Ravi

Asset Book security by responsibility is possible.
Please review the user guide/white paper.
Here is the note.
Subject: Attaching existing depreciation book to organization hierarchy
Doc ID: 139518.1 Type: BULLETIN
Modified Date: 22-OCT-2008 Status: PUBLISHED
This article is being delivered in Draft form and may contain
errors. Please use the MetaLink "Feedback" button to advise
Oracle of any issues related to this article.
Purpose
Security by book is new feature for Release 11i. The purpose of this document
is to describe how to attach existing depreciation book to asset organizations.
This can useful mainly for customers after upgrade to 11i.
Prerequisites
Following steps assume an Asset Organization is already defined.
Step by step instructions
1. Query for your Asset Organization in Organization Window:
Navigator -> Setup -> Security -> Organization -> Description
Select "Asset Organization: from "Organization Classifications"
2. When you are in the Organization form, click the Others button.
The Book Controls window will appear.
3. Query up the existing book that you wish to attach to the organization
or you can create New Asset book.
4. In order to save this book to the organization, the form trigger must recognize
that a change has occurred to the book information. To create a simple change
that will enable the Save function to work, enter the Description field and simply
add a space at the end
5. Navigate to the File menu and select File: Save. Although there is no visible
alteration to the book information, the form will now be able to save the book
to your organization.
RELATED DOCUMENTS
ORACLE APPLICATIONS WHITE PAPER Security by Book, from 24-MAR-2000
Oracle Assets Users's Guide, Setting Up Security by Book, page 9-60

How to restrict Sales Order LOV in Transact Move Orders

Hello
We would like to restrict LOV in the Transact Move Orders screen to only those orders that were created in that specific Operating Unit. Also, we would like to control the LOV for Release Rules to a specific OU.
I believe the LOVs for both these screens pull from MTL_SALES_ORDERS. Therefore, I guess we would need to create a Value Set of type Table, value will be SEGMENT1 (Sales Orders) but unsure about the where condition.
Any help would be appreciated.
Sanjib

Sanjib
Release Rules: Why don't you use the SRS version if pick releasing rather than the screen. Ofcourse you lose some flexibility to enter order number and customer information. If screen is a must you can take the LOV from the existing form and create a new record group in the new form instance trigger. Add this peice to the lov sql to control the pick release rules result:
(select 1 from org_organization_definitions cust_org
where org.organization_id=cust_org.organization_id
and operating_unit=FND_PROFILE.VALUE('ORG_ID'))
This org is mtl_parmeters table used in LOV.
2. Transact Move Orders: Instead of changing the LOV and playing with the Sales Order Flexfield, you can use the inventory organization security to control who can do a transaction. This will not change the LOV but definitely will control the access to the records after you have queried. As you know this is inventory or warehouse function not the OE function.
You can try one idea though:
Segment2 is order_type which is OU specific. You can create value set that picks the LOV from the order types table for a specific OU, assign that to the segment2 and create a security rule. This rule will have include and exclude rules. You include all the Order types that are in a specific OU and assign that rule to the resp of that OU where move order is transacted. This will limit the LOV of the order types to only those that are availble for that resp. I have not tried this but give it a shot.
Thanks
Nagamohan

IT0045 - How to restrict loan types to a maximum of 1 per employee?

Hi Gurus - We have a requirement to restrict employees to only one loan type to be open at a time. This means if an employee has a Vehicle Loan currently running, he or she cannot create another one unless the previous one is closed.
Setting the Time Constraint of IT0045 to "T" and then setting the individual Subtypes (Loan Types) to Time Constraint of 2 did not work. SAP apparently creates a unique sequential number for each loan type thus enabling more loans to be created for the same loan type. I guess this is the standard functionality.
1. How can we prevent the user from taking more than one loan type?
2. The ENDDA of the loan record may not reflect the correct loan schedule. Sometimes users create it a 31.12.9999. We need to check the payment in IT0078 I guess.
The 45 infotype has this functionality for India. I am using International Payroll for Nigeria.
Any help in this regards would be appreciated.
Thanks
Pramod

Thanks Mohan. That constant is for India payroll only. I am using international payroll customized for Nigeria. SAP creates a unique sequential number for each loan you create and makes this number as part of the primary key thereby allowing any number of loans of the same type to be created. This is a default functionality. However SAP has modified this for India's IT0045. Do you have any other suggestions? Thanks once again.
Regards
Pramod

HOW TO Restrict Absence Type LOV Self Service in 12.1.3

Similar Messages

Maybe you are looking for