How to restrict material output in the report published in the portal

Hi all,
I am new to BI 7. I have a series of materials that start with the material IDs TR52, RL25, XY56 and son on. Now my user wants to view only the materials that are starting with the ID TR52 when he runs the report from the portal. In the material box when I type in TR I am getting the list of all the materials, the same is happening even when I try TR*. What should I do so that I can restrict the report output only to a particular material ID that my user types in?
Please help.
Thank you.
TR.

Hi Friends,
Thank you for the reply.
I tried to exclude the values, but i dont find any chance to exclude them
If i try the same from characteristic restriction, its allowing me to exclude.
Is there any other possibility to restrict these? Please suggest

Similar Messages

How to run the report and show the output in excel file

salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u all

Hi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
 ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
 ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
 ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
 ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
 ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
 ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
 ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

How to restrict Material Class in Sales Contract Doc

Hi,
I need to restrict Material Class in Sales order based on Item catagory, Material group4 and Sales contract Document type.
If the above 3 fields having a particular value then the system should restrict all the other classes of that material and display only a particular class and it's related characteristics.
If any one come across such a senario then pklease let me know.
Regards
Ajay

Hi,
You have to make few configuration settings before you actually restrict at the object level. The solution is clearly discussed in the below thread:
how to restrict material master by material type t-code MM01
Hope this helps!!
Regards,
Raghu

How to Restrict Material Type in MM01 ?

*Hi experts,*
*How to restrict material type ? i wanted to restrict the end-user not to access any other material types than Raw material,Semi-finished goods. it means when end user trying to create material then if he enters other than these two material types then he should get error saying that "your not authorized to select that xyz material type".*
*I have tried to restrict the object M_MATE_MAR(Material Master : Material type) but am unable to do so. is there any other object which take care of Material types ? did i selected correct object or not??*
*can anyone help out.*

Hi,
You have to make few configuration settings before you actually restrict at the object level. The solution is clearly discussed in the below thread:
how to restrict material master by material type t-code MM01
Hope this helps!!
Regards,
Raghu

How having a where-clause in a report without affecting the actions button

Hi,
let's suppose I have a simple report built on a table where I have a date field.
If I want the report to get the records of the table when you login ao as to have only those of the current month, I could modify the region source in the page rendering of the report in this way:
select
“COLUMN1"
"COLUMN2",
"COLUMN3"
from   "MYTABLE"
where to_char(COLUMN2,'mm-yyyy') = to_char(trunc(sysdate),'mm-yyyy')
order by COLUMN2
The problem is that if I try to choose another range of date on the application by using the filter of the Actions button, I get no records and I suppose that is 'cause the report applies the filter to the query where I have
where to_char(COLUMN2,'mm-yyyy') = to_char(trunc(sysdate),'mm-yyyy')
and so I doesn't work.
How should I do?
Thanks!

try this...
select
“COLUMN1"
"to_char(COLUMN2,'mm-yyyy') ",
"COLUMN3"
from   "MYTABLE"
where COLUMN2 between to_char(COLUMN2,'mm-yyyy') and to_char(trunc(sysdate),'mm-yyyy')
order by COLUMN2

How to Sort the report by clicking the column_header at runtime?

Hi, Im New to Crystal Reports. Im Using Crystal report server XI. and JSP I need to Sort the report by clicking the column_header at runtime. How to implement this ? Please help me. - Venkat. 

Hi VenkatI don't believe there is a way to do this out of the box. I believe you would have to do a custom code solution so that when you click on the header the report is re-run with a different sort order. This may not be that easy to implement.I'm going to check with the new WebElements custom functions that were released on this site. They may provide for this functionality. Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

I want the report which gives the material having Shelf life.

I want the report which gives the material having Shelf life, but without batch management in the master .
Thanks in adavnce...
Vikrant

Hi,
Report MB5M can be used for this.

Changing the report displayed on the basis of value selected frm the prompt

Hi,
I have requirement in which there is dashboard prompt which has three columns namely year, month and report name.
The user will select the report name from the prompt, once done the report that has been selected should show up
on the dashboard page and he should be able to select data on the basis of month and year from it.
Also, if the user wants to go to the other report he should be able to select it from the prompt and view it.
Pls shed some light on how to progress about it. As of now think if something like this is possible then it would definitley
need two prompts one for report name and the other for month and year.
Thx :)

Hi Kishore,
When i click on the link given by you it takes me to a page where a link is given with text as under
Oracle BI 10.1.3.3/2 - Selecting Reports from Dashboard Prompts and Guided Navigation Sections
And when i click on this nothing opens up.
Thx
Edited by: Phantasm on Jun 22, 2010 3:05 AM

Unable to filter the report by clicking the last column's name

Hi,
I have interactive report page having lots of column. All columns were not fitting in the screen so I added a code in the region--- header and footer section---
<div style="overflow: auto; width: 1220px; height: 700px;">
I got a scroll bar at the bottom. But a new problem arised. When I am trying to filter the report by clicking the column name in the report page , a popup is opening for the first column but the pop up is not opening for the last column. For the middle columns, the popup is opening but not below its name. This pop is for filtering the report based on that columns.
Please give some idea to fix this bug.
Thanks,
Chandra Bhanu

You could try to display as many columns as fit your screen, and put the rest of your columns as form fields in a detail view, somewhat like this:
http://apex.oracle.com/pls/apex/f?p=vincentdeelen:report_details_in_iframe_v1
Please tell the steps how to do it.
Thanks,
Chandra Bhanu

What does the field "Version of the Reporting Component" in the table RSZC

Hi Experts,
Was wondering if any of you have the answer to the following:
The table RSZCOMPDIR stores details of the queries.
Now the field "Version of the Reporting Component" in this table contains many different values viz. 0, 11, 13, 15, 100, 101, 102 etc.)
However, am not sure if this field denotes the object type....for e.g. bot calculated & restricted key figues may have version 15 etc.
So, in a nutshell, what does the field "Version of the Reporting Component" in the table RSZCOMPDIR signify?
Thanks,
Bala

I have not seen this done for CVI but I believe for all Microsoft functions such as this you would use ActiveX to call the Word, Excel, and possibly powerpoint ActiveX classes.
Ian M.
National Instruments

Hi, We are developing quite a few excel worksheet reports. The reports dont show the cells if contain formulas ( when opened in iPad or ipod ), is there any good solutions .

Hi,
We are developing quite a few excel worksheet reports.
The reports dont show the cells if contain formulas ( when opened in iPad or ipod ),
Is there any good solutions .
Thanks.

There is no version of Excel for iPads. iPads come with something that lets you view the contents of Excel files but it implements only the common easy features and there are (literally) hundreds of things you can do in Excel that it doesn't know how to show on the screen, including some functions.
If you intend to work with spreadsheets on an iPad I suggest you buy Numbers for iPad
http://www.apple.com/apps/iwork/numbers/
which understands more (but still not 100%) of the things that Excel does. It is so cheap that you can probably afford to buy a copy just to see whether it does what you want.
If you are doing things with spreadsheets and intend to be primarily working on iPads then I suggest you actually use Numbers on a Mac as well, rather than using Excel at all.

Delete the reporting results from the workbook

Hi,
How telete the reporting results from the workbook via the BEX menu functionality

That functionality is not available in the Bex 7 Analyzer, just in the Bex 3.x functionality. To delete workbook results, we simply select the rows of data (but NOT the titles) and delete the rows in excel. Then save the workbook.
If you delete the titles you will delete the analysis grid, and you will have to recreate it.
You can also change the variable values, click "Cancel" and the workbook then shows no results for any query related field. However, this includes the navigation panes and text elements, which produces a rather blank looking workbook.

When send the report directly to the printer from Oracle IDS 9i

Hi.....
I m using Oracle IDS 9i, Oracle AS 9i and Database 9i for my new project.But i m facing a problem when i m trying to show a report from oracle IDS 9i.When i send the report directly to the printer without showing it,then the printer connected to the application server is working.But the printer connected to with PC(From where a send the command) is not working but printer connected with AS is working,but not that one which one i m wanting.....Why this problem is happening?Can anyone help me?
KSI

Note:It is always better to have network based printers rather then PC shared printers. What that means is your printer is not connected to a PC. It has a direct connection to the network via NIC. You would then setup the printer on your AS in the printers setup. If the AS is rebooted you do not need to authenticate the printer shares again with a network based printer.
If I understand you correctly, you have a printer connected to your AS(application server) and a printer connected to your PC. You can submit a report direct to the printer connected to the AS but cannot send a report direct to your printer connected to your PC.
From the symptoms you described, the problem is usually associated with the AS not being able to see the printer shared on your PC. You either have the address to your printer address defined wrong or your AS is trying to direct a job to your printer but doesn't have rights to do it.
First, Try to print a notepad job to your printer attached to your PC from the AS. This will tell you if you have access to do so or not.
- If it can't, you need to figure out why? This has nothing to do with oracle.
Second, thing to check is your Oracle "Report Queue Manager" on the AS. Make sure that you can submit a report manually from the Report Queue Manager. If it fails the "Report Queue Manager" will give you useful errors as to why it failed. This will help you isolate the problem.
Third, Once you can submit a job from the reports queue manager manually to your shared printer you should be able to submit from your application direct. If it still does not work your address to the printer is incorrect. Try submitting manually through the reports queue manager again. When selecting printer you will be given a list of accessible printers from the AS. Select the one connected to your PC. Once selected the full network address will appear. Copy and use this as the printer location in your job submission through your application.
That's it... Where using this right now and it works great. Hope this helps.
Eric.

Sorting the report by clicking the column header

Hello,
Currently working on a requirement where i need to sort the report by clicking the column header. Can anyone please help me on this.
Suppose i have 3 colums deptno,dname,sal fields in my report. if i click deptno column header, report has to sort by deptno.Like that i need for other columns also.
Any help is really appreciated
Thanks
Ram

Hello,
You can sort the fields using method suggested by Cauvery. However if you would like to have Ascending/ Descending sort order control at column header, then would require to implement few additional steps.
First do the sorting of field using the way suggested by Cauvery. Once sorting is done, right click on the column name and select the option ' Bind Sort Control'. You will see the sorted field in the window. select the field and click ok.
Now you would get 2 arrows on column. If you click upper arrow, fields would be sorted in Ascending Order and if you click on down arrow, it would be in Descending order.
Regards,
Chinmay Athavale

Sales Report - The report to display the Sale Dist accor to the Ship to.

Hi Gurus,
We have a report where Sales District is placed under the rows with Variable as Authorization processing type.
The current report is displaying the Sales District with Sold-to of the sale. But now the requirement is for the report to display the sales district according to the ship-to of the sale.
But, we need the sales district reported from the ship-to level.
and The format of the report should not change.
Can any one guide me on the above incident. Points will be awarded.
Regards,
Venkat.

This can be done by swithching sales district on the navigational attr of ship-to and use
And using the same in the place of current sales district.
regards,
Naveen.A

How to restrict material output in the report published in the portal

Similar Messages

Maybe you are looking for