How to restrict the particular value in BEx?

HI,
I have added particular dimension in query prompt. While refreshing i got more value in particular dimension. How to restrict the the value in bobj or bex?
Here i attached the screen shot. Please find the attachment.

Hi Mani,
Please make sure of your requirement. If you are using only one single query for multiple reports then i strongly recommend the below criteria or else it better to restrict the value in the BEx itself if you have no other reports on the same BEx query.
If you are trying to restrict a report to a default prompt value then use equal to in query filter prompt or you can also restrict them to list of values i.e multiple values.Please follow as per the screens below. I am mentioning two ways.
Method:1
Step 1: Click on Prompt Options(Blue Questionmark Symbol)
Step: 2 : Click on the Values after you check the prompt properties options as shown below.
Step 3: Search for values if they are keys by checking the "Search in keys" or else not required.
Method 2: Here is another Easy way is Just give the input in the value box as shown below.
Let me know if you need any further help.
Regards,
Naveen

Similar Messages

How to restrict the duplicate values in lov column of VO based Adv Table

Hi Gurus,
I want to restrict the duplicate values at lov which is a colunm in an Adv Table.
If user enters duplicate values then first it should show an error msg that Duplicate values have been entered.
After the duplicate values have been removed, then the user can save all the values in the table.
My Adv Table is based on a VO.
The link how to restrict the duplicate values at form level
talks about Adv Table based on a EoVO, which doesnot work in my case.
My Approach,
I am iterating through RowSetIterator and committing through PROCEDURE.
I am able to avoid duplicate entry through a function checkRespId. (given below)
Below code is for iterating and committing.
public void saveline(String reqid,String userid)
System.out.println("RequestId/saveline"+reqid);
System.out.println("UserId/saveline"+userid);
OAViewObject vo = (OAViewObject)getRespLineVO1();
RespLineVORowImpl row = null;
int fetchedRowCount = vo.getFetchedRowCount();
RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
deleteIter.setRangeStart(0);
deleteIter.setRangeSize(fetchedRowCount);
for (int i = 0; i < fetchedRowCount; i++)
System.out.println("Inside the for LOOP");
row = (RespLineVORowImpl)deleteIter.getRowAtRangeIndex(i);
String respoidid = row.getAttribute("ResponsibilityId")+"";
String respname = row.getAttribute("ResponsibilityName")+"";
String stdate = row.getAttribute("StartDate")+"";
String enddate = row.getAttribute("EndDate")+"";
String linestatus ="A";
if(userid!=null)
if(!(respoidid.equals("null")) && respoidid!=null)
String checkingrespid=null;
checkingrespid = checkRespId(userid,respoidid);+contains no if not duplicate and yes if its duplicate+
System.out.println("checkingrespid for Resp with ID :"+respoidid+"exists or not "+checkingrespid);
if(checkingrespid.equals("No"))
String message, result = null;
Connection txn = getOADBTransaction().getJdbcConnection();
try
calling PROC ...
catch(Exception e)
message = "Error in Inserting into line" + e;
throw new OAException(message, OAException.ERROR);
else
throw new OAException("You have entered duplicate no. of values", OAException.ERROR);
else
System.out.println("respoidid is null");
break;
deleteIter.closeRowSetIterator();
public String checkRespId(String userid,String respoidid)
String createRow="No";
OAViewObject vo = (OAViewObject)findViewObject("CheckRespVO1");
if (vo != null)
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0, userid);
vo.setWhereClauseParam(1, respoidid);
vo.executeQuery();
System.out.println("ROW COUNT IS "+vo.getRowCount());
if(vo.getRowCount()>0)
createRow="Yes";
else
createRow="No";
return createRow;
Problem:
I remove the duplicate entries and click on save and get this error.
Unable to perform transaction on the record. \nCause: The record contains stale data. The record has been modified by another user.
\nAction: Cancel the transaction and re-query the record to get the new data.
Thanks,
Sombit

Hi Anil,
I am trying out your code but stuck in inserting the rows
using your code in URL: http://oracleanil.blogspot.com/2010/09/oaf-passing-table-type-object-to-oracle.html
I am always getting the same exception i.e COde blast in when I run.
My modified code is:
String[] as = null;
Number[] vNumber = null;
Number[] vNumberrespid = null;
Number reqidnumber = null;
reqidnumber = new Number(Integer.parseInt(reqid));
Connection txn = getOADBTransaction().getJdbcConnection();
String mCreateSearchRequestStatement = null;
OAViewObject vo = (OAViewObject)findViewObject("RespLineVO1");
int j = vo.getFetchedRowCount();
try
System.out.println("abouce try");
vo.reset();
if (vo.getFetchedRowCount() > 0)
System.out.println(String.valueOf("Fetched row count ").concat(String.valueOf(vo.getFetchedRowCount())));
int i = 0;
as = new String[j];
vNumber = new Number[j];
vNumberrespid = new Number[j];
while (vo.hasNext())
vo.next();
System.out.println(String.valueOf("Inisde the do while loop").concat(String.valueOf(i)));
vNumber[i] = (reqidnumber);
vNumberrespid = ((Number)vo.getCurrentRow().getAttribute("ResponsibilityId"));
as[i] = String.valueOf(vo.getCurrentRow().getAttribute("ResponsibilityName")).concat(String.valueOf(""));
System.out.println("Request ID "+reqidnumber[i]);//getting null even there is some value selected
System.out.println("ResponsibilityId "+vNumberrespid[i]);//getting null even there is some value selected
System.out.println("Resp Name "+as[i] );//getting null even there is some value selected
i++;
CallableStatement cs = txn.prepareCall("{call XX_PassTableType.XX_PassTableType_prc(:1, :2,:3)}");
ARRAY array = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumber);
ARRAY arraynew = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumberrespid);
ARRAY array1 = new ARRAY(new ArrayDescriptor("APPS.JTF_VARCHAR2_TABLE_100", txn), txn, as);
cs.setArray(1, array);
cs.setArray(2, arraynew);
cs.setArray(3, array1);
cs.registerOutParameter(3, 2003, "JTF_VARCHAR2_TABLE_100");
cs.execute();
ARRAY error = null;
error = (ARRAY)cs.getArray(2);
if ((error != null) && (error.length() > 0))
System.out.println(String.valueOf("Error is ").concat(String.valueOf(error.getArray())));
String[] retError = new String[j];
retError = (String[])error.getArray();
System.out.println(String.valueOf("Error in saving data").concat(String.valueOf(retError[0])));
cs.close();
catch (Exception exception)
throw new OAException("code blast", OAException.ERROR);
Thanks,
Sombit

How to restrict the Null Values for Key Figules in the Bex Query

Hi Friends,
    I want to restrict the Null values of a perticular key figure in the Bex Query Output.
I will explain in details. i have 3 key figures in my query.. let us assume.. key1 key2key3
key1           key2                key3
4                4                   100.00
5                0                   200.00
1                0                    19.00
0                1                    10.00
i don't want to see the the records for which key 2 is 0.
we have a setting in the Bex Query for restricting the Zero values in the query properties. If we enable that setting it will show
4               4          100.00
but i want the report to display..
4               4           100.00
0               1           10.00
can any body guide me. <b>i want to display the values if key2 <> 0.</b>
Regards,
Nagesh.

Hi AVR,
nice to see reply.
can you eloborate your view...how can i put the condition.
<b>i want to put the condition key2 <> 0.</b>
Regards,
Nagesh.

How to restrict the dropdown values in Att/abs type in Record Working Time

Hello experts,
We are implementing ESS business package. In the Record Working time, within the Weekly View and Daily View tabs, there is a column Att/abs.type which has several drop down values - like: floating value, Funeral Leave, Military Reserve, Regular Attendance, etc. Our requirement is to restrict the dropdown values by means of showing only one of these values (say: Regular Attendance) and others should not be shown. How do we achieve this?
Thanks
Vicky R.

Hi Siddarth,
Thanks for the info. By the way, this table info is not mentioned in the Business Package documentation. Which documentation are you referring to?
Thanks
Vicky R.

How to restrict the attribute values for the user in query designer

Hi All,
I have a requirment where certain user would see certain vailes in the query desiner of the attribute.
The requirment is we have planing material which is attribute of material
When X user want to restrict the values for planning material ,where he is able to see all the planning material.But who is not authorized for all the value.
Ex: X user has authorization for see planning material 100,101,102. of material But when he try to restrict the planning material in query designer where is getting all values of planing material.
Or
is there way to blank the restriction help.so that he can't able to see values while restricting
Please some one can advise me on it..

Hi,
Let me sum up:
you have an object ZPLNMAT for the planning material
you have the object 0MATERIAL for material and this object has ZPLNMAT as attribute.
If you can restrict in the query designer, I suppose this attribute is then as navigationnal and also added in the multi-provider.
The object ZPLNMAT is checked as relevant for authorization, and you set up a role with the attached values of ZPLNMAT this user should have access to.
Are you sure the users are restricting on the ZPLNMAT object and not 0MATERIAL, because you should have everything now
PY

How to restrict the charactersitic values in reporting

Hi All,
I have a CCA report with characterstic "GL Accont". Instead of displaying the complete characteristic values i want to display the first 3 characters out of EIGHT characters in that report( say "10003WW", i need to display it as "100" only).
Looking for your earliest response.
Thanks in advance...

Hi Suresh,
In My R& D This is not possible at query level ie without changing the infoprovider.
I am giving another solution for this.
1. Create a new characteristic based on current O Gl account
2. The new characteristic should be a navigational one to the 0 Gl account.
3. In the transfer rules of 0GL ACCOUNT you write a routine for this new navigational attr. Data will update from GL account but only first 3 digits will update.
4. Specify the same NA in the data target.
5. Add this NA to your Query.
For this changes will not harm the Transaction data in the production. But you should Re- init the master data of 0 GL Account.
You should try with this solution in the Development, if you feel it doesn't harm any transactional data then you should proceed.
Thanks & Regards,
Venkata sharma.

How to restrict the user to enter only numeric values in a input field

How to restrict the user to enter only numeric values in a input field.
For example,
i have an input field in that i would like to enter
only numeric values. no special characters,alphabets .
reply ASAP

Hi Venuthurupalli,
As valery has said once you select the value to be of type integer,once you perform an action it will be validated and error message that non numeric characters are there will be shown. If you want to set additional constraints like max value, min value etc you can use simple types for it.
On the project structure on left hand side under local dictionary ->datatypes->simple types create a simple type of type integer
The attribute which you are binding to value property ;make its type as simple type which you made
Hope this helps you
Regards
Rohit

How to restrict the st loc list applicable to particular plant mm01

Hi,
While creating material master user after selecting a particular plant user sees all the storage locations available in the system.How to restrict the storage location list applicable to particular plant while material creation
Best Regards,
BM

Hi,
As Mahesh said , you need to put validation there, please contact your development team for this.
Though you are able to see all storgae location you are not able to create the material master, it throws as error if you select incorrect storage location which is not maintained for that particulare plant.
It gives an error message
Entry Plant SL does not exist in T001L (check entry)
So user will not be able to create material master for improper plant SL combination.
Thanks,
Ravi

Urgent: How to exclude a particular value from the selection in the infopac

How to exclude a particular value from the selection in the infopackage.
Ex: not load for cost center 10000
Thank you,
sam

Hi Sam,
You cannot do this directly as exclusion, but you can include all other values, even as ranges and thus exclude the particular value, else you can also try to do this by writing a routine.
Hope this helps...

How to restrict the length of the input?

Hi all, could any one tell me how to restrict the length of the input string? My SOA Suite is 10.1.3.1
I tried the following; getting an error.
<element name="RestrictLengthProcessRequest">
<simpleType name="SSN">
<restriction base="string">
<length value="10"/>
</restriction>
</simpleType>
where RestrictLengthProcessRequest is the message name of the corresponding .wsdl and SSN is the input whose length is to be restricted.
The error is : 'Attribute name not defined on element simpleType'
Thanks in advance.
Edited by: user11275112 on Aug 27, 2009 11:44 PM

Hi swathi,
For this you have to create a simple data type. No need of writing a code.
Go to Dictionaries -> Local Dictionary -> Data Type - > Simple Type - > Right click and "Create Simple Type".
Here you should create a Simple type with String as built-in Type. Here you will also see the Length Constraints option.
Set the value of maximum length and minimum length. In your case set the value of maximum length to 10. At runtime this will not allow the user to enter more than 10 characters.
Now create an attribute and bind it to this newly created simple type. Bind the value of the input field with this particular attribute.
Regards
Manohar

How to restrict the length of input field

Hi,
How to restrict the length of input field. That is we should not be able to enter more thatn 10 charecters.
Regards,
H.V.Swathi

Hi swathi,
For this you have to create a simple data type. No need of writing a code.
Go to Dictionaries -> Local Dictionary -> Data Type - > Simple Type - > Right click and "Create Simple Type".
Here you should create a Simple type with String as built-in Type. Here you will also see the Length Constraints option.
Set the value of maximum length and minimum length. In your case set the value of maximum length to 10. At runtime this will not allow the user to enter more than 10 characters.
Now create an attribute and bind it to this newly created simple type. Bind the value of the input field with this particular attribute.
Regards
Manohar

How to restrict the number of login attempts?

Hi,
Is there any "out of the box" solution to restrict the number of login attempts
in personalization server?
Thanks

why is it obvious he wants to restrict instances
of program, rather than instances in
it? it's not obvious, but it's what I think he meant
he asked "how to restrict the number of instances in
a program". it has the words "instances" and
"program" in it, but not the word "class". on face
value, yes, he's asking about instances within one
JVM. knowing a bit about how newbs minds work, I'm
reading between the lines and I reckon he meant
instances of his program. had he meant
"instances of classes" he'd have said so. "instances
in a program" sounds like somebody more experienced
talking, which if he was, he'd know how to do limit
either instances of classes or instances of
his program, and wouldn't be asking. I could be
totally wrong, but I don't think I am; that's what I
inferred from his post. only the OP knows for sureInteresting.
The OP also said "to any number". So you were guessing that this particular user wants to only permit, for example, five instances to be run on any one box at one time?

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

How to check the whole values of a set of map exist in the vector of map?

Hi Friends!
I have a set of map; map<int, set<int>>myset;
and a vector of map; map<int,vector<int>>myvec;
myset contains;
1=>11 16 30
3=>2 11
6=>2
7=>9 12 16
8=>9 13 16
myvec contains;
1=>11 15 21
2=>16
3=>11 16
4=>2 13
5=>11 16 30
6=>9 5 10
First, the first value of myset(11 16 30) will be checked with all the values of myvec, if the whole value(11 16 30) available at certain value in the myset, then it gives the key of myvec. So, the output for the first value is 5.
Next, if you consider the value (2 11) in the myset, there are no matching values that contains whole 2 11 in the particular value in myvec. Therefore, what we do is, delete the last value of the current set, that is 11, and now consider 2 as
the value and find the matching value from myvec. That is (2 13) and the key is 4.
Like wise when we find the first possible match, then we print the key of myset immediately, there may be some other possible values available in the values of myset.
I have written two functions that check the particular whole values of the myset matched with a particular values in myvec.
bool IsValueInVec(int value, const IntVec& v2)
IntVec::const_iterator itv=find (v2.begin(), v2.end(), value);
if (itv!=v2.end())
return true;
return false;
bool AreAllValuesInVec(const IntSet& s1, const IntVec& v2)
for(set<int>::const_iterator sit=s1.begin();sit!=s1.end();++sit)
if (!IsValueInVec((*sit), v2))
return false;
return true;
Could anyone help me to solve this?

You have neither a set of map nor a vector of map. You have two maps. Each contains keys of type int. The mapped values of one are of type set<int>. The mapped values of the other are of type vector<int>. If
you don't understand the types of the objects you are using, you will never be able to use them properly.
Help you solve what? Do the two functions you wrote perform as desired? If not, provide a complete description of how what they do differs from what you want.
Somewhere in code you have not shown, you need to call AreAllValuesInVec for a particular set and vector. If this function returns false and if the set contains more than one element, you need to delete the last element of the set and try again.
If the set contains only a single element, you need to perform some "failure" processing that you have not described. When the function returns true, you need to print the key of the map element which contains the vector. What are you
having trouble with?

How to restrict the department to not user other departments' equipment?

Dear SAPIENTS,
How to restrict the department to not user other departments' equipment? If suppose any one creating order for equipment having different authorization group then system should not allow me to do this.
Regards,
Kaushal Rai

Kaushal Rai,
Use Authorization group for technical objects, create authorization gruops in IMG and assign the same to the Equipment master and block the other department with the same authorization group. For ristricting the authorization group to other departments after creating and assigning it to the equipment seek help from your BASIS team.
goto the below path for cerating the Authorization group:
IMG - PMCS - Master data in PMCS - Technical Objects - Define Authorization groups:
Here you define the authorization groups, after completion of this step go to the Equipment master in General Data tab page there is a feild Authourization Group, mention the respective authorization group and provide this Authorization gruop value to the respective user in the user role with the help of BASIS Team.
Regards,
Praveen.

How to restrict the particular value in BEx?

Similar Messages

Maybe you are looking for