How to restrict values in one prompt based on value from another prompt

Hi
I have a requirement as follows. I have two fields (objects)
program code
contract number
one program code can have several contract numbers.
I need to provide prompts on Program code and contract number. when user selects one program from the prompt on program code then contract field should only show contract numbers belonging the program user selected.
Please let me know how to bring this functionality in Webi report.
Thanks in advance.

Hi
if ur requirement is in query level its impossible.(i mean whn u click on programcode then u have to display in contract at query level)
if you want to display at report level then
The two objects Program and contract have a mapping then place a program object in query filter and use operator equal to and select prompt and run the query then it will ask you to select program .whn on choosing it you will get filtered contract numbers for that program in report level . There no need to use prompt for contract numbers object .
Hope this helps u
Thanks
sunil
Edited by: K.sunil on Nov 7, 2011 9:30 AM

Similar Messages

Infopath: How to load data in one field based on value selected in another field

We have a drop down list field in the infopath form and we have some more fields that should change depending on the dropdown selection.
How can we achieve this please ?
Thank you !

Hi Prajk, sounds like you want to do cascading dropdowns. If so, see the link below. If you're just trying to enter information into a field (not a dropdown) based off the value of the dropdown, then set a rule so that if dropdown = "this," set
the field's value to "this."
http://blogs.msdn.com/b/bharatgupta/archive/2013/03/07/create-cascading-dropdown-in-browser-enabled-infopath-form-using-infopath-2010.aspx
cameron rautmann

AJVOAF : How to set a value in one LOV which is coming from another LOV

Dear Friends,
I have a issue regarding LOVs. Actually I have 3 LOVs ( Material ,Subinventory ,Locator) in my maintainence user page.
First Requirement is I have to add subinventory and locator fields to the Material LOV itself (for user no need to go upto Subinventory & Locator LOVs) and WHICH record of Material ,user iis selecting corresponding Subinventory and Locator values should come in Subinventory & Locator boxes ( Second Requirement is i have to make these two Subinventory & Locator LOVs as READ ONLY)
Third Requirement is I have to bring these Subinventory and Locator values from Material LOV page to Subinventory & Locator boxes.
I hope iam clear.
First and Second Requirement s done.
Iam struggiling for third req.Can any one plz help.
Thanks
Aravinda

hi,
In your Subinventory LOV add Bin variable using it Query tab. which has Bind VAriable And View Criteria section.use Bind Variable section. those are in the view object level.
then your all lov include view object select and choose it View Accessors section. it has your lov and Edit your Subinventory LOV and then popup dialog box. Inside it you can make Inside Parametor section select relevant bind variable name and it need value.
thaks.

Update one table based on condition from another table using date ranges

Hello!
I have two tables:
DateRange (consists of ranges of dates):
StartDate           FinishDate
        Condition
2014-01-02
      2014-01-03           true
2014-01-03
2014-01-13
false
2014-01-13
2014-01-14           true
Calendar (consists of three-year dates):
CalendarDate    IsParental
2014-01-01
2014-01-02
2014-01-03
2014-01-04
2014-01-05
2014-01-06
2014-01-07
2014-01-08
2014-01-09
2014-01-10
I want to update table Calendar by setting IsParental=1
  for those dates that are contained in table DateRange between
StartDate and FinishDate AND Condition IS TRUE.
The query without loop should look similar to this but it works wrong:
UPDATE
Calendar
SET IsParental = 1
WHERE
CalendarDate   BETWEEN
(SELECT
StartDate
FROM DateRange
WHERE Calendar. CalendarDate   = DateRange. StartDate
           AND
(SELECT StartDate
FROM DateRange
WHERE Calendar. CalendarDate   = DateRange. FinishDate
AND Condition
IS TRUE
Is it possible to do without loop? Thank you for help!
Anastasia

Hi
Please post DDL+DML next time :-)
-- This is the DDL! create the database structure
create table DateRange(
StartDate DATE,
FinishDate DATE,
Condition BIT
GO
create table Calendar(
CalendarDate DATE,
IsParental BIT
GO
-- This is the DML (insert some sample data)
insert DateRange
values
('2014-01-02', '2014-01-03', 1),
('2014-01-03', '2014-01-13', 0),
('2014-01-13', '2014-01-14', 1)
GO
insert Calendar(CalendarDate)
values
('2014-01-01'),
('2014-01-02'),
('2014-01-03'),
('2014-01-04'),
('2014-01-05'),
('2014-01-06'),
('2014-01-07'),
('2014-01-08'),
('2014-01-09'),
('2014-01-10')
select * from DateRange
select * from Calendar
GO
-- This is the solution
select CalendarDate
from Calendar C
where EXISTS (
select C.CalendarDate
FROM DateRange D
where C.CalendarDate between D.StartDate and D.FinishDate and D.Condition = 1
UPDATE Calendar
SET IsParental = 1
from Calendar C
where EXISTS (
select C.CalendarDate
FROM DateRange D
where C.CalendarDate between D.StartDate and D.FinishDate and D.Condition = 1
[Personal Site] [Blog] [Facebook]

Find/Replace text in one Doc based on List from another Doc

I'm not sure Automator can do this so I thought I would ask before spending too much time on it. I have searched the forums and several of the Automator tutorial websites.
What I want to do is take one text file (or it could be an Excel file, I don't care) with a list of words to Find in a folder full of files.
For example I have this list in a txt file:
Big Dog
Furry Cat
Bird
Fox
I would want the action to search every document for every occurrence of 'Big Dog', then search for every occurrence of 'Furry Cat', etc. I would also want to replace each instance with something else, say a formatted html link.
Is something like that even possible with Automator? I am on Snow Leopard but I didn't see a forum for Automator on SL. Thanks in advance for any help/advice.

Asked and responded here:
http://discussions.apple.com/thread.jspa?messageID=8367522
Yvan KOENIG (from FRANCE vendredi 14 novembre 2008 14:22:47)

How to restrict user's inputs to F4 help Values?

Hi Experts,
I have created a custom infotype where i have a custom search help created for one of the fields, the problem is that even if i give values other than the values in the search help the infotype doesnt throw any error and gets saved.
So can anybody explain how to restrict the field only to search help values.
Thanks,
Revanth.

Hai.
Check the example it may help you.
See the following ex:
TYPES: BEGIN OF TY_MBLNR,
MBLNR LIKE MKPF-MBLNR,
END OF TY_MBLNR.
DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
data: it_ret like ddshretval occurs 0 with header line.
At selection-screen on value-request for s_mat-low.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'MBLNR'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_MBLNR
FIELD_TAB =
RETURN_TAB = IT_RET
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
read table it_ret index 1.
move it_ret-fieldval to S_mat-low.
ENDIF.
Go through the test program.
REPORT Ztest_HELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
Regards.
Sowjanya.b.

How to restrict the user to enter only numeric values in a input field

How to restrict the user to enter only numeric values in a input field.
For example,
i have an input field in that i would like to enter
only numeric values. no special characters,alphabets .
reply ASAP

Hi Venuthurupalli,
As valery has said once you select the value to be of type integer,once you perform an action it will be validated and error message that non numeric characters are there will be shown. If you want to set additional constraints like max value, min value etc you can use simple types for it.
On the project structure on left hand side under local dictionary ->datatypes->simple types create a simple type of type integer
The attribute which you are binding to value property ;make its type as simple type which you made
Hope this helps you
Regards
Rohit

Tip: How to play a playlist one song at a time from iTunes on a computer using the checkbox property

I would like to share a tip about how to play a playlist one song at a time from iTunes on a computer. The tip I am sharing is simple, but I was not able to find it in the iTunes Help. After searching on the internet I found the idea for this solution in a discussion in which this was presented as a frustrating problem rather than a desired behavior. This tip relies on the checkbox for each song in iTunes. For a song in a playlist to play automatically, the checkbox must be checked. To keep a song from playing in a playlist, simply uncheck it. Therefore, to keep all songs from playing automatically in a playlist, simply uncheck them all. Now you have a list of desired songs in a desired order but none of them will play automatically. You can play each one when you want to play it without having to search for the next song and without having to be at the computer to stop the playing after each song.
Step by step:
1. Create the playlist.
2. Uncheck all of the check boxes in the playlist (In iTunes for Windows, ctrl click one of the check marks to uncheck all of the checkboxes at once)
3. Now double click (or select and press spacebar) a song to play it. It will stop when finished because there is no other song checked to be played next.
4. If you want to change back to normal sequential play, ctrl click one of the check marks again to change all of the checkboxes back to the checked status.
Based on some discussions I found while looking for a solution (including at least one in which the questioner got bashed about why anybody would ever want to do such a thing and in which the proposed solutions were things like creating one song playlists or simply press stop after each song), some may not understand why this would ever be desired. Here's why I wanted to do it:
I was responsible for playing a series of songs at a dance. I needed to stop after each song to have a transition time to allow me to introduce the next song and to give new dancers time to get onto the floor and other dancers an opportunity to leave the floor. Furthermore, I was also dancing and didn't want to have to spend time searching for the next song (which is why I wanted to create a playlist in advance with just the songs I wanted to play in the order I wanted to play them) and I wanted each song to stop after playing since I was not at the computer to press stop.
I hope this will help others who have a similar need.

Thank you! I put some self help hypnosis tracks to listen to on my iPod. I did not want to go to the next track automatically, I wanted to listen to them individually, one at a time. (If I fell asleep, I did not want to 'wake up' in the middle of a different track.) Your information helps me understand that I need to re-load this playlist onto my iPod from my Mac computer, only first, I need to UNCHECK the boxes in front of each track so the iPod will STOP each time after playing the selected track. It is too bad that so many functions are not availabvle within the iPod, but that is probably why they can make it so compact.

How to display data from a recordset based on data from another recordset

How to display data from a recordset based on data from
another recordset.
What I would like to do is as follows:
I have a fantasy hockey league website. For each team I have
a team page (clubhouse) which is generated using PHP/MySQL. The one
area I would like to clean up is the displaying of the divisional
standings on the right side. As of right now, I use a URL variable
(division = id2) to grab the needed data, which works ok. What I
want to do is clean up the url abit.
So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
I want is clubhouse.php?team=Wings.
I have a separate table, that has the teams entire
information (full team name, short team, abbreviation, conference,
division, etc. so I was thinking if I could somehow do this:
Recordset Team Info is filtered using URL variable team
(short team). Based on what team equals, it would then insert this
variable into the Divisional Standings recordset.
So example: If I type in clubhouse.php?team=Wings, the Team
Info recordset would bring up the Pacific division. Then 'Pacific'
would be inserted into the Divisional Standings recordset to
display the Pacific Division Standings.
Basically I want this
SELECT *
FROM standings
WHERE division = <teaminfo.division>
ORDER BY pts DESC
Could someone help me, thank you.

Assuming two tables- teamtable and standings:
teamtable - which has entire info about the team and has a
field called
"div" which has the division name say "pacific" and you want
to use this
name to get corresponding details from the other table.
standings - which has a field called "division" which you
want to use to
give the standings
SELECT * FROM standings AS st, teamtable AS t
WHERE st.division = t.div
ORDER BY pts DESC
Instead of * you could be specific on what fields you want to
select ..
something like
SELECT st.id AS id, st.position AS position, st.teamname AS
team
You cannot lose until you give up !!!
"Leburn98" <[email protected]> wrote in
message
news:[email protected]...
> How to display data from a recordset based on data from
another recordset.
>
> What I would like to do is as follows:
>
> I have a fantasy hockey league website. For each team I
have a team page
> (clubhouse) which is generated using PHP/MySQL. The one
area I would like
> to
> clean up is the displaying of the divisional standings
on the right side.
> As of
> right now, I use a URL variable (division = id2) to grab
the needed data,
> which
> works ok. What I want to do is clean up the url abit.
>
> So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
> all
> I want is clubhouse.php?team=Wings.
>
> I have a separate table, that has the teams entire
information (full team
> name, short team, abbreviation, conference, division,
etc. so I was
> thinking if
> I could somehow do this:
>
> Recordset Team Info is filtered using URL variable team
(short team).
> Based on
> what team equals, it would then insert this variable
into the Divisional
> Standings recordset.
>
> So example: If I type in clubhouse.php?team=Wings, the
Team Info recordset
> would bring up the Pacific division. Then 'Pacific'
would be inserted into
> the
> Divisional Standings recordset to display the Pacific
Division Standings.
>
> Basically I want this
>
> SELECT *
> FROM standings
> WHERE division = <teaminfo.division>
> ORDER BY pts DESC
>
> Could someone help me, thank you.
>

Assigning a Numeric Value in a Cell Based on Text in Another Cell

In advance, thanks for your assistance. I'm trying, in vain, to assign a numeric value in a cell based on text (from a dropdown menu) in another cell. For example, in cell A5 I have a dropdown list that includes the options "blue", "red", "white", and "gold." I want cell C15 to be 2 if A5="blue"; I want C15 to be 0 if A5="red"; I want C15 to be 2 if A5="white"; and, I want C15 to be 1 if A5="gold."

Tippet,
This is a job for LOOKUP.
The expression for the Result cell is: =LOOKUP(A2, Lookup :: A1:A4, Lookup :: B1:B4)
The aux. table contains the matches that you assign for the colors.
Regards,
Jerry

Can I assign a task based on information from another column?

For example:
Let's say I have a column called "Question Type" and this column has multiple checkbox choice, those being:
     Math
     Science
     History
     English
     Other
I want to allow users to be able to select multpile catagories for the question, like making one both math and science (which right now is completely possible)
I then want another column that says who the problem is assigned to. Bob is good at math, Joe at science, Jill at histroy, Jenn at English, and Billy handles everything else.
1) Is there a way that the task can be automatically assigned to my math expert Bob when I specify that the item I am adding is a math problem?
2) If I make a problem both math and science, can the task be assigned to both Bob and Joe?
Thanks in advance!

Hi,
According to your post, my understanding is that you wanted to assign a task based on information from another column.
To assign task to multiple users, you need to:
Create a workflow and add action: Start Approval Process.
Click these user, select the Group, change One or a time(serial) to
All at onec(paralle).
Right click the action, select Properties, click ExpandGroups, change No to
Yes.
Then you can assign task to each member of the group.
I recommend to follow the steps as below to achieve what you want:
Create a custom list, add columns: Question Type(Choice); Assigned to(Person or Group).
Create a workflow associated the list.
Add conditions and action as below:
Then the task can be automatically assigned to 123 when the item is a math problem.
In addition, if you make a problem both math and science, the task can be assigned to both 456 and 789.
You can add other conditions to satisfy all the requirements.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How can I to control any element of my GUI from another class?

How can I to control any element of my GUI from another class?

For that, you need the external class to have the reference to your element.. If your idea is to change basic properties like width, height etc.. then you can have the constructor of the external class to take the object of the parent of your class as the parameter and modify ..
However, if the properties to be altered/accessed are custom to your element, then you will have to have the class accept an object of your class as the parameter. No other option..
What exactly is your requirement?

Clearing Value in one Prompt based on selection in another

Hello,
I have 2 prompts in my BEx query designer for same characterstics ( one is single value, characterstic variable and another one is Hierarchy node variable ). During the query execution, If user selects a value in first prompt and goes to the other prompt and selects a value, i need to clear the selected value in the first prompt. And vice versa as well.....
Please suggest.

Jagan,
Let me explain my isue in detail...
I have created 2 variables for the same characterstics and both of them are ready for input. One variable is of characterstic type and other is Hierarchy node type.
Now, when user executes the query he sees two prompts. Lets say user selects a value for one prompt and then goes to second prompt and selects another value for the second prompt, then i need to clear the values that was selected by him for the first prompt. And vice versa....

How to use bind variable value of one VO as initial value for other VO row?

JDeveloper 10.1.3.3, ADF Faces, ADF BC
Hi,
I have two View Objects: one read only with several bound variables and another editable entity based. Correspondingly there are two ADF Faces pages: first contains search form based on the read-only VO and second create form based on the editable VO. The search form has several hidden fields for some of bound variables because they aren't edited directly by user. These fields are updated with PPR when user selects other search criteria from LOV.
There is a command button in the first page that navigates to the second form. Is there any way to transfer values of bound variables from the first VO to the second VO as initial values of the new row?
I tried to set custom controller for the second page and retrieve search criteria values from request parameter map but values from hidden fields are missing. I think because that these fields are updated by PPR. Of course I can add custom action method to the navigation button and in the method put these values to request parameter map but I hope there is better solution.
Thanks,
Marius

To summarize, given a bind variable value for one VO, on creating a row in a second VO, for 1 of the attributes of the second VO, you want to use the first VO's bind variable value. Correct?
A potential solution ADF BC driven:
1) Ensure you have an AppModuleImpl for your AM
2) Ensure you have a ViewImpl for your 1st VO (where the bind variable will exist) - lets refer to that VO as "Alpha"
3) Ensure you have a ViewRowImpl for your 2nd VO (the one you want to default the value in) - lets refer to that VO as "Beta"
4) For your first VO "Alpha" create the bind variable (say pValue)
5) In your second VO "Beta" ViewRomImpl add following code:
@Override
protected void create(AttributeList attributeList) {
super.create(attributeList);
AppModuleImpl am = (AppModuleImpl)this.getApplicationModule();
String someValue = am.getAlphaView1().getpValue();
setSecondVOAttr(someValue); // change this code to whatever your setter is for the field you want to initialize.
}Hope this helps. Let us know how you go.
Regards,
CM.

I how to restrict in bar chart y axis repeated values

Hi,
Why Y-axis values reapeating like 0 0 1 1 2 2 3 3 when search results gives single bar.
I need show always single values like 0 1 2 3 4.
How to reduce bar size if get only one value single bar occupies whole chart.
thanks
Nr

I know this is a really old question but ...
I thought I'd provide a little insight since I had the same problem. If, as in the case described, the values are specified to have 0 decimal places, and the range of the data is, say, between 0 and a small number then the Y scale/range may be 0.0, 0.5, 1.0, 1.5, 2.0, ... But at 1 decimal place, these may display (truncated?/rounded) as 0, 0, 1, 1, 2, ... The easy solution would be to specify 1 (or more) decimal places. However, the easy solution has other effects. My stacked bar chart was very dense with only enough room to show a single digit for the Values. This became unreadable when the value 1 (one) was replaced by 1.2 and 2 by 2.3. So I unchecked display Values. (Why couldn't the values display staggered like labels do so they they don't overlap?)
So even though, I had intended to display "values," I had to give that up when I showed additional decimals in the labels.
Howard

How to restrict values in one prompt based on value from another prompt

Similar Messages

Maybe you are looking for