How to retrieve complete Document list using RESTful webservice

Hi,
I want to retrieve the complete list of documents from the CMS. When made the below call, I am getting only 10 documents(which is default). If included the parameter 'limit' I am getting a max of 50. How can I get the complete list if my CMS contains huge list (may be some thousands)?? Plz help.
http://<serverName>:6405/biprws/raylight/vx/documents
Thanks,
Rekha.

Hi Anthony,
Thanks for the reply.
As per my understanding, 'offset' is something which filters the first xx(offset value) documents in the result value. The result list starts from the (offset +1) th element.
'Offset' is helpful if I know the position of the desired document
Plz correct me.
My requirement is - to fetch a single docId based on the name of the document from the ENTIRE list.
I am not aware of the position of my document in the result list. In this scenario , how will the 'offset' help me?
.Thanks,
Rekha

Similar Messages

How to under complete document to configure prerequisite using fields both

Hi,
When I configure prerequisite under complete document for one substitution but fialed withe syntax error when I tried use the following prerequisite:
BKPF-BUKRS = 'XXXX' AND
BSEG-HKONT IN SET1
But I input this prerequisite under line item it is ok . I am wondering if there is no permit for BSEG table field under prerequisite under complete document. Pls give me some advice on how to under complete document to configure prerequisite using fields both in BKPF and BSEG. Thanks.

Hi Mohan,
I did active it at call point3(complete document) but my question is when I configure prerequest I am confused that only BKPF data fields can be used in prerequest. Why field in BSEG can not be used in prerequisite? Once I input BSEG field in prerequisite there will be syntax error message shown up.

Document Set Creation in document library using REST API in Sharepoint 2013

Hi,
I want to create the document set using REST API call. Currently i am able to create the folder and able to upload the files using REST API's in the document library. Is there any way we can pass the contentype name or Id and create the document set using
REST API call. We need to create the document set along with metadata and upload the files inside the document set.
I need to create the document set along with meta data column values using REST API. Please let me know how we can achieve this through REST API.
Thank you,
Mylsamy

Hi,
According to your post, my understanding is that you wanted to create document set along with managed metadata fields.
The REST API does not currently support working with Managed Metadata or Taxonomy fields.
As a workaround, we can use the JavaScript Client Object Model.
Create document set using JavaScript Client Object Model.
http://blogs.msdn.com/b/mittals/archive/2013/04/03/how-to-create-a-document-set-in-sharepoint-2013-using-javascript-client-side-object-model-jsom.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/aacd96dc-0fb2-4f0d-ab4c-f94ce819e3ed/create-document-sets-with-javascript-com-sharepoint-2010
Set managed metadata field with JavaScript Client Object Model.
http://sharepoint.stackexchange.com/questions/95933/add-list-item-with-managed-metadata-field-through-jsom
http://sharepointfieldnotes.blogspot.com/2013/06/sharepoint-2013-code-tips-setting.html
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

How to retrieve complete report output in HTML format

Hi,
I'm looking for how to retrieve complete report output in HTML format.
I have tried the following and it only give me first page of the report output where in the actual report output should be 5 pages. Is there something I'm missing.
CallbackOption[] boCallOpt = new CallbackOption[1];
ImageManagement boImgMan = new ImageManagement();
boImgMan.setCallbackScript("getImage.jsp");
boImgMan.setImageManagementHolder("imageName");
boImgMan.setDocumentReferenceHolder("docRef");
boCallOpt[0] = boImgMan;
RetrieveData oRetrieveData = new RetrieveData();
RetrieveView oRetrieveView = new RetrieveView();
oRetrieveView.setCallbackOption(boCallOpt);
oRetrieveData.setRetrieveView(oRetrieveView);
Action[] oActions;
oActions = new Action[1];
oActions[0] = fillPrompts;
oReportEngine.getDocumentInformation(boDocInfo.getDocumentReference(), null, oActions, null,oRetrieveData);
Testing this on BOE XI 3.0
Thanks,

For Web Intelligence, HTML is an interactive viewing format and not an export format such as PDF.
Note that the HTML will be embedded with postback URLs to the application for images and drill downs.
Closest you'd get is to be able to specify HTML output of an entire REPORT rather than REPORT_PAGE in the ViewSupport.setViewMode method. But this brings back just one report in the document, and will have postback URLs mentioned above.
Sincerely,
Ted Ueda

How to delete completly uninstalled list on 3g curve

How to delete completly uninstalled list on 3g curve !
I recently deleted about 8 apps from my app world and they continued to show up in the uninstalled list. How can I permanently delete all of these apps ? & I've tried holding ALT and pressing RST, DIDNT WORK
then i tried Reintall – Pause Download – Cancel Download didnt work .
i have Blackberry Curve 3G
Help pls !!!!!!!
thank you if anyone help me to solve this probleme

Any app that was downloaded using your Blackberry ID will always show up in one of the 3 My World categories in App World (installed, uninstall, upgrade).
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

How to retrieve data from MDM using java API

hi experts
Please explain me the step by step procedure
how to retrieve data from MDM using java API
and please tell me what are the
important classes and packages in MDM Java API
thanks
ramu

Hi Ramchandra,
You can refer to following links
MDM Java API-pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2d18d355-0601-0010-fdbb-d8b143420f49
webinr of java API
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/89243c32-0601-0010-559d-80d5b0884d67
Following Fourm Threads will also help.
Java API
Java API
Re: usage of java API ,
Matching Record
Need Java API for Matching Record
Thanks and Regards,
Shruti.
Edited by: Shruti Shah on Jul 16, 2008 12:35 PM

How to retrieve the content type used in a document library (C# - Client Model).

Hello,
I need to know if it's possible to retrieve the content type used in a document library, so I can know the columns active and used in this document library. I am using the Client Model in C#.
Thanks

First, retrieve your document library as a List object. Then, use the
List.ContentTypes property to iterate through all the content types assigned to the list.
Blog:
blog.beckybertram.com |
RSS | @beckybertram |
SharePoint 2010: Six-in-One

How to create a document folder using ListData.svc

Hi All,
I've recently been put on a project where I need to use the REST services (ListData.svc) to retrieve and add documents to the document library. It all has been smooth sailing until I hit the point where I want to save a document in a path that doesn't exist.
I get an error if I try to save a file where the folder structure doesn't exist. I then went about it a different way trying to create the folder structure first. This also didn't work and I get an error message saying that the entity type is marked with the
MediaEntry attribute but no save stream was set for the entity. Not too sure what set for the save stream if I'm just adding a folder.
So my question is can a file be added to a folder structure that doesn't exist where it automatically creates the folders. If not can the service create folders?
Some sample code I've been using:
var folder = new SampleDocumentLibraryItem();
folder.Name = "Sample";
folder.Title = "Sample";
folder.ContentType = "Folder";
folder.Path = "/sample/folder1/folder2";
spContext.AddToSampleDocumentLibrary(folder);
spContext.SaveChanges();
Thanks in advance,
Damo

Hi All,
Finally managed to figure this one out. For anyone who needs source on how to create a document folder. Some sample source is below...
var folder = new DocumentLibraryItem();
folder.Name = "Folder Name";
folder.Title = "Folder Name";
folder.ContentType = "Folder";
folder.Path = path;
spContext.AddtoDocumentLibrary(folder);
spContext.SetSaveStream(folder, stream, false, folder.ContentType, folder.Path + folder.Name + "|0x0120009BCC19899CEBC6468FF4EEAC7B8CF4F5"
spContext.SaveChanges();
So the important differences in the code above. The content type of the object and stream MUST be set to "Folder". I'm not sure why but you still need to set the save stream to be a valid stream even though you're only adding a folder. So just keep the stream
open and then pass "true" to close it when you actually save the file. The other important element as noted from the URL's in the previous comments is you need to add a "|" + Content Type ID of a folder. You'll be able to get this ID by visiting the rest service
for an existing document library and view source to see the actual content type id for a folder.
Thanks everyone for your help,
Damo

How to send an updated list using batch job

Hi All,
The program displays data on the screen, if the data looks ok, then there is an option to update.
When I run update, the program submits a batch job and the basic list gets updated, but my batch job is still sending the data on the screen. how can i send the updated list using batch job.
Ex: output of the program
                1         2
       there is an update button on the screen, when i press update button, my program submits in batch job, the above list becomes
                1        2
                3        4
but when i check the spool, it shows the o/p as         1           2 ..it is not sending the updated list.
Please suggest me how to send the updated data
Thanks,
Kumar

Hi Krishna,
I have added a button on the alv list. when i press update button, my program updates the list, then submits the batch job. I am attaching the sample test program i am trying with, please suggest me how can i get the updated list.
*& Report ZTESTSSSSS
REPORT ZTESTSSSSS.
DATA: gt_fieldcat TYPE slis_fieldcat_alv,
      lt_fieldcat type slis_t_fieldcat_alv,
      gt_sort     TYPE slis_t_sortinfo_alv,
      g_repid     LIKE sy-repid,
      gt_layout   TYPE slis_layout_alv.
start-of-selection.
lt_return-type = 'S'.
lt_return-message = 'test message'.
append lt_return.
CLEAR gt_fieldcat.
gt_fieldcat-fieldname = 'TYPE'.
gt_fieldcat-outputlen = '3'.
gt_fieldcat-tabname   = 'LT_RETURN'.
gt_fieldcat-seltext_l = 'Type'.
gt_fieldcat-seltext_m = 'Type'.
gt_fieldcat-seltext_s = 'Type'.
APPEND gt_fieldcat TO lt_fieldcat.
CLEAR gt_fieldcat.
gt_fieldcat-fieldname = 'MESSAGE'.
gt_fieldcat-outputlen = '15'.
gt_fieldcat-tabname   = 'LT_RETURN'.
gt_fieldcat-seltext_l = 'Message'.
gt_fieldcat-seltext_m = 'Message'.
gt_fieldcat-seltext_s = 'Message'.
APPEND gt_fieldcat TO lt_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM       = sy-repid
      I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
      I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
      IT_FIELDCAT              = lt_fieldcat
    TABLES
      T_OUTTAB                 = lt_return
    EXCEPTIONS
      PROGRAM_ERROR            = 1
      OTHERS                   = 2.
*&      Form set_pf_status
      text
     -->RT_EXTAB   text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'STANDARD'.
ENDFORM. "Set_pf_status
*&      Form user_command
      text
     -->R_UCOMM      text
     -->RS_SELFIELD text
FORM user_command USING r_ucomm     LIKE sy-ucomm
                        rs_selfield TYPE slis_selfield.
DATA: li_count TYPE I.
IF r_ucomm EQ 'UPD'.
Adding another message
    lt_return-type = 'S'.
    lt_return-message = 'Another test message'.
    APPEND lt_return.
    rs_selfield-refresh = 'X'.
    rs_selfield-col_stable = 'X'.
    rs_selfield-row_stable = 'X'.
    l_upd = 'X'.
   LOOP AT lt_return.
     WRITE: / lt_return-type, lt_return-message.
   ENDLOOP.
    IF sy-batch IS INITIAL.
      l_upd = 'X'.
Open the Job
      CALL FUNCTION 'JOB_OPEN'
        EXPORTING
          jobname          = w_name
        IMPORTING
          jobcount         = w_number
        EXCEPTIONS
          cant_create_job = 1
          invalid_job_data = 2
          jobname_missing = 3
          OTHERS           = 4.
      IF sy-subrc = 0.
        SUBMIT ('ZTESTSSSSS') VIA JOB w_name NUMBER w_number
                AND RETURN
                WITH p_recnnr = p_recnnr.
        CALL FUNCTION 'JOB_CLOSE'
          EXPORTING
            jobcount             = w_number
            jobname              = w_name
            strtimmed            = 'X'
          EXCEPTIONS
            cant_start_immediate = 1
            invalid_startdate    = 2
            jobname_missing      = 3
            job_close_failed     = 4
            job_nosteps          = 5
            job_notex            = 6
            lock_failed          = 7
            OTHERS               = 8.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM. "User_command
Thanks,
Kumar

How to retrieve Del. No. using MBLNR

Hi Guyz..
One quick Qn !
I have MBLNR in my I_MSEG, now I want to retrieve Del. doc. no. using MBLNR. Now I tried to select VBELV as Del doc. using VBELN as subsequent doc. from VBFA table. I am using FOR ALL ENTRIES in ITAB,
The prob is the select on VBFA takes 5 mins for 5 record in I_MSEG.
So how can I make this select fast or , what alternative I can use.
here the code is
    SELECT mblnr
           line_id
           matnr
           charg
      FROM mseg
      INTO TABLE i_mseg
     WHERE matnr IN s_matnr
       AND charg IN s_charg.
   IF NOT i_mseg[] IS INITIAL.
    SELECT vbelv
           vbeln
           vbtyp_v
           vbtyp_n
      INTO TABLE i_vbfa
      FROM vbfa
       FOR ALL ENTRIES IN i_mseg
     WHERE vbeln   = i_mseg-mblnr
       AND posnn   = i_mseg-line_id
       AND vbtyp_n = 'R'
       AND vbtyp_v = 'J'.
please help !
Thanks
Jaif

Hi
If you use all key fields in selection then you can get faster than present perfamence.
In MSEG, below two fields also key fields.
MJAHR
ZEILE
In VBFA, VBELV, POSNV, VBTYP_N are key fields.
Reward if it dose.
Thanks
Siva Kumar

HT4859 How to retrieve Numbers documents stolen by Apple and dumped in iCloud?

Apple has stolen my documents when i loaded the latest version of Numbers. I can see the documents underr icloud but cannot figure how to retrieve them and remove them. Can't understand why I should have to store my documents on someone else's computer.

A couple days ago I contacted DriveSavers.com and she quoted me the following;
-SERVICE OPTIONS AND PRICING
Our pricing is based on the drive capacity, the operating system and
turnaround time. The final cost is based on the complexity of the
recovery and the final recovery results.
The data recovery estimate for the 120GB Hard Drive you described is:
• Standard Service (1-2 business days): $900-3900 (successful
recovery will fall between $2800 - $3900)
$200 attempt fee if the data is unrecoverable
• Economy Service (5-7 business days): $500-2700 (successful recovery
will fall between $1800 - $2700)
$200 attempt fee if the data is unrecoverable
• Priority Service (24 hrs. / 7 days a week): $1800-8900 (successful
recovery will fall between $7900 - $8900)
$800 attempt fee if the data is unrecoverable
Please Note: DriveSavers will never exceed the amount quoted.
That's nuts. Im ganna try my luck with DRD.ae in Dubai and see how much they charge, let me give them a call now and will post a comment in a bit.
-Joey

How to print out document list items (and with all comments!)

Hi all,
I am wondering how to get a good printout of document lists.
In a web application I have some document list items and the users are adding many comments in it, so that the document list item doenst show all in the initial view, but scroll buttons to navigate up and down.
I was surprised to read that the standard print functionality doesnt support document items.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/68ce8391886e47e10000000a422035/content.htm
How can I print out a list of all document list items with all comments?
Ist there a workaround?
thanks in advance for sharing your experiences, br, Michael

Thanks guys for trying to help me...
Gabriel, I not wanna do "a lot of trix" to get this out of iCal when it should be solved by iCal (from my point of view).
Dancing Brook, Yes I hope we will see that in the future. I am convinced that there is many of us out there who want to see that function in iCal, even if they not really missed it yet.
I have already sent a request to iCal feedback (hope they noted). Maybe they will if we are many doing so...

How to retrieve material document no. based on production confirmation no.

Hi Friends,
I am retreiving the production confirmation number(PRTNR) thru bapi BAPI_REPMANCONF_CREATE_MTS. Based on that confirmation number I need to retrieve material document number (MBLNR)
Because multiple users can post finished goods from different locations at same time, I have to complusory retrieve the material document number based on confirmation number only. Tables MKPF and MSEG doesn't have confirmation number fields in them.
I would appreciate if anyone could suggest me good ideas.
Thanks in Advance.

Hi Melih,
Thank you for your valuable response.
My BLPP table gets updated with material document as well as confirmation number.
When I test my FM directly, I get a confirmation number in my export. I don't get a material document number in my export parameter. But, BLPP gets updated with material document number as well as confirmation number.
But, if I debugg the FM with the same data I get the material document number as well as conf. no. populated in my export parameters.
This is what I have done:
Export parameters
MAT_DOC type BELNR_D
CONF type PRTNR
DATA: GS_BLPP               LIKE BLPP,
                      GV_MAT_DOC      TYPE BELNR_D.
CLEAR: GV_MAT_DOC, GS_BLPP.
    SELECT SINGLE * INTO GS_BLPP
                     FROM BLPP
                    WHERE PRTNR = CONF
                      AND PRTPS = '0001'.
    GV_MAT_DOC = L_BLPP-BELNR.
    MAT_DOC              = GV_MAT_DOC.
Please let me know if I have done something wrong.
Thanks.

How to call Jive Search methods using REST Web Services from ADF

Hi
Can someone provide me an example to call JIVE Search using REST web services from Webcenter ADF.
As we have the similar facility to call UCM Search from WebServices DataControl.
Do we have anything similar like this for JIVE Search?
JIVE 5.1 is deprecating SOAP style web services and so I am planning to use REST.
Any suggestions on this is much appreciated.
Many Thanks
Khad

so what exactly is the problem here?
what is not working?

Pulling user/group field data from SharePoint list using REST, jQuery, Knockout.js Sharepoint 2013

I'm trying to make an interactive task board based on the task list app in SharePoint 2013. The task lisk includes fields like "Title","Description","Status","% Complete","Due Date","Assigned To",
etc. I used knockout.js to bind "Title","Description", and "Status" to my HTML controls. Here is some of the code:
var ViewModal = function(items, listname){
var self = this;
self.sortBy = ko.observableArray(sortBy);
self.tasks = ko.observableArray(items);
self.listname = ko.observable(listname);
self.auto = ko.observable(false);
self.getTasks = function() {
clearTimeout(self.getTasks);
// server relative url to REST service endpoint
var ajaxurl = _spPageContextInfo.webServerRelativeUrl + "/_vti_bin/listdata.svc/" + self.listname() + "?$orderby=PriorityValue";
$.ajax({
type: "GET",
url: ajaxurl,
contentType: "application/json; charset=utf-8",
dataType: "json",
cache: false,
processData: true,
success: function (data, status, xhr) {
if (status == "success" && data) {
ko.mapping.fromJS(data.d.results, mapping, self.tasks)
$(".task-item").draggable();
error: alert
if (self.auto()) {
setTimeout(self.getTasks, 10000);
<div class="tasks-column">
<div class="column-header">Not Started</div>

<div class="task-item">
<div class="view" data-bind="visible: !IsEditing()">
<button class="edit" data-bind="click: $root.editTask">edit</button>
<h2><span data-bind="text: Title"></span></h2>
<div data-bind="html: Description"></div>
<span data-bind="text: PriorityValue"></span>
</div>
<div class="edit" data-bind="visible: IsEditing">
<button class="save" data-bind="click: $root.saveTask">save</button>
<input type="text" data-bind="value: Title"></input>
</div>
</div>
I'm having trouble displaying the data from the "Assigned To" user/group field. I tried:
<span data-bind="text: AssignedTo"></span>
But it displays the field as [object Object]
I tried using $select/$expand
?$select=Title,AssignedTo/Id,Assignedto/Title&$expand=AssignedTo/Id,AssignedTo/T‌itle";
But it still returns the [object Object]

Hi,
Please use the REST URI below:
/_api/lists/getbytitle('ListName')/items?$select=Title,AssignedTo/ID,AssignedTo/Title&$expand=AssignedTo/ID,AssignedTo/Title
More information for your reference:
How to get User Details and User Group Details in SharePoint 2013 REST API with Knockout for SharePoint Js (KoSpJs)
http://www.ashokraja.me/post/How-to-get-User-Details-and-User-Group-Details-in-SharePoint-2013-REST-API-with-Knockout-for-SharePoint-Js-(KoSpJs).aspx
How to Get Login Name and Display Name using SharePoint 2013 REST API
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/how-to-get-login-name-and-display-name-using-sharepoint-2013-rest-api.aspx
Best Regards
Dennis Guo
TechNet Community Support

How to retrieve complete Document list using RESTful webservice

Similar Messages

Maybe you are looking for