How to retrieve Data from SAP BW to SQL

Hi All,
i am looking for way to retrieve Data from SAP BW to SQL.
Could you please give me some indcations or a document on how to implement it?
Thanks in advance
Cheers
Gilo

Hi,
You need to use open hub destination. third party tool destination for SQL
SAP BW TO SQL -- Extraction to the third-party tool can be executed as follows:
       1.      You define an open hub destination with Third-Party Tool as the destination type.
       2.      You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
       3.      You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
       4.      You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
       5.      When the extraction process is finished, the system sends a notification to the third-party tool using API RSB_API_OHS_3RDPARTY_NOTIFY.
       6.      The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
       7.      The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.

Similar Messages

How to retrieve data from table(BOM_ITEM)

Hi All,
I wrote webservices using axis1.4 to get BOM information from SAP.. funtional module is CAD_DISPLAY_BOM_WITH_SUB_ITEMS
webservices works fine..I'am able to retrieve data from Export Parameter..But not able to retrieve data from table
How to retrieve data from table(BOM_ITEM)..?
Cheers, all help would be greatly appreciated
Vijay

Hi,
1. Create Page Process.
2. Select Data Manipulation
3. In category select "Automated Row Fetch"
4. Specify process name, sequence, select "On Load - Before Header" in point.
5. Specify owner, table, primary key, and the primary key column(Item name contains primary key).
6. Create a process.
7. In each item select "Database Column" in "Source Type".
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

How to retrieve data from MDM using java API

hi experts
Please explain me the step by step procedure
how to retrieve data from MDM using java API
and please tell me what are the
important classes and packages in MDM Java API
thanks
ramu

Hi Ramchandra,
You can refer to following links
MDM Java API-pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2d18d355-0601-0010-fdbb-d8b143420f49
webinr of java API
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/89243c32-0601-0010-559d-80d5b0884d67
Following Fourm Threads will also help.
Java API
Java API
Re: usage of java API ,
Matching Record
Need Java API for Matching Record
Thanks and Regards,
Shruti.
Edited by: Shruti Shah on Jul 16, 2008 12:35 PM

How to extract data from SAP in FDM 11121

I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

How to Pull data from sap r/3 tables to oracle tables

how to fetch data from sap r/3 tables & data pulled to oracle table .
GIVE THE APPROPRITE ANSWER FOR THIS.
THANKS IN ADVANCE.
If it is useful for me , i am giving point.
regards ,
Navita
Edited by: NAVITA YADAV on Mar 7, 2008 2:07 PM
Edited by: NAVITA YADAV on Mar 7, 2008 2:08 PM

You need to perform some native SQL to fetch data. Before doing this connection must be exists b/w your R/3 and Oracle server.
Basis team will help you to have connection.
Check the connection name in the table DBCON.
Check the below code to handle native SQL.
SELECT SINGLE DBMS
           FROM DBCON
           INTO DBTYPE
           WHERE CON_NAME = DBS.
IF DBTYPE = 'ORA'.
    TRY.
      EXEC SQL.
        CONNECT TO :dbs
      ENDEXEC.
ERROR Handling for Native SQL *************
      IF SY-SUBRC <> 0.
        MESSAGE `Docusphere connection failed.` TYPE 'I'.
        EXIT.
      ENDIF.
EXEC SQL PERFORMING loop_output.
    OPEN C1 FOR
    SELECT UK1, UK7, uk6, uk9, uk22, uk23, uk25    "field names of Oracle table
    FROM IIS_DOCS_AP10D
    WHERE ( UK2 = 'ZFIINVOICE' OR UK2 = 'ZFIPAYREQ' )    AND
    UK19 = 'E'                                           AND
    UK20 IS NULL
ENDEXEC.
      DO.
        CLEAR W_OUTPUT.
        EXEC SQL.
          FETCH NEXT C1 into :wa1-arc_doc_id, :wa1-bukrs, :wa1-belnr, :wa1-gjahr, :wa1-wi_id, :wa1-ARCH_METHOD, :wa1-barcd.
        ENDEXEC.
enddo.
Reward points if helpful.................

HOW to retrive data from SAP Tabel

Hi Friends,
   1)Can you please explain how to retrive data from SAP table(example AFRU).
   2) we had requriment based on the qunatity , Product name and date we need to display KPI's .KPI is based no products manfactured per day with some conditions
Regards
Srikanth

Hi Udayan,
    I want to retrive SAP Table data from xMII.can you please explain elabarately how to call "RFC_READ_TABLE" from xMII.
please do the needful
Thanks
Srikanth

How to extract data from SAP 4.7 and upload data to SAP ECC 6.0

Hi,
How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.

hi
good
both works not possible simultaneously.
If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
thanks
mrutyun^

How to retrieve data from URL or querystring in bsp pages

hi
how to retrieve data from URL or querystring in bsp pages.
thanks
Edited by: Vijay Babu Dudla on Mar 23, 2009 7:35 AM

Hello Friend,
Vijay is correct.
REQUEST is a system object available in runtime of BSP application.
It is the object of interface IF_HTTP_REQUEST.
Use methof REQUEST -> GET_FORM_DATA( )
Regards
Krishnendu

How to Retrieve data from Variant Table

Can anyone help me by telling how to retrieve data from variant table which was created by user. I am able to see data of variant table only thru cu60 transaction but not se11. I s there any function module to do this?

Hello Mohan,
if u already have data and u want to populate it in F4 help then use below code -
u Have to make use of FM - 'F4IF_INT_TABLE_VALUE_REQUEST'
REPORT ZGILL_VALUE_REQUEST                     .
data: begin of lt_all occurs 0.
        include structure DYNPREAD.
data end of lt_all.
data: begin of lt_selected occurs 0.
       include structure DDSHRETVAL.
data: end of lt_selected.
DATA: BEGIN OF lt_code OCCURS 0,
            code LIKE zgill_main-PERNR,
      END OF lt_code.
data no_dyn like sy-dynnr.
Parameters : ECODE like zgill_main-PERNR.
*parameters: pernr like pa0001-pernr .
no_dyn = sy-dynnr.   "give the scren no directly or sy-dynnr in case of report.
At selection-screen on value-request for ECODE.
select PERNR into table lt_code from zgill_main.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield               = 'ECODE'
        dynpprog               = sy-repid
       dynpnr                  = no_dyn
      dynprofield              =       'ECODE'
      window_title           = 'Employee Details'
       value_org              = 'S'
      DISPLAY                = 'F'
   TABLES
        value_tab             = lt_code
       RETURN_TAB             = lt_selected.
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*if sy-subrc eq '0' .
write: 'success'.
*endif.
read   table lt_selected index sy-tabix.
move lt_selected-fieldval to ECODE.

API to retrieve data from SAP content server

Is there an API available to retrieve data from SAP content server?

Hi
you could check out function groups starting with OPT.
F.eks. OPTB, OPTC, OPTD
Also check function group ARCHIVOBJECT.
best regards
Thomas Madsen Nielsen

How to retrieve data from domain(Value Range) of the table

hi
how to retrieve data from domain(Value Range) of the table
thanks

Hello,
You can try using the FM: DOMAIN_VALUE_GET TB_DOMAINVALUES_GET.
BR,
Suhas
Edited by: Suhas Saha on Mar 24, 2009 10:08 AM

How to retrieve data from excel sheet

Hi,
How to retrieve data from excel sheet into a java file.

janu05 wrote:
If we append a $ in the end of the table name it is showing an error saying "invalid name,should not contain any invalid character or punctuation"Great, I'm very happy for you.
Unless that was a question. In which case you might what to tell us a little more.
Like which API you are using (assuming we are still on "reading an Excel sheet".

How to retrieve data from catsdb table and convert into xml using BAPI

How to retrieve data from catsdb table and convert into xml using BAPI
Points will be rewarded,
Thank you,
Regards,
Jagrut BharatKumar Shukla

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

How to retrieve date from a set type in SAP CRM in BRF+ application

Hi,
Can anybody please let me know how can I retrieve date from a set type in SAP CRM to BRF+.
I need to process the data in BRF+ and then send it back to CRM. Thanks.
Regards
Yogesh

Hi Manish,
From my experience, you cannot change an existing attribute of a set type (esp. when it has a dependency).
You need to delete the attribute, save the changes and then re-create the attribute with new value table.
Also remove any dependencies before deleting the attribute.
Regards,
Vartika

How to get data from Oracle using Native SQL in SAP.. Problem with date

Hi Masters.
I'm trying to get data from an Oracle DB. I was able to connect to Oracle using tcode DBCO. The connetion works fine
I wrote this code and it works fine without the statement of where date > '01-09-2010'
But i need that statement on the select. I read a lot about this issue, but no answer.
My code is (this code is in SAP ECC 6.0)
DATA: BEGIN OF datos OCCURS 0,
      id_numeric(10),
      component_name(40),
      comuna(10),
      record_id(10),
      status,
      sampled_date(10),
      END OF datos.
DATA: c TYPE cursor.
EXEC SQL.
connect to 'LIM' as 'MYDB'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'MYDB'
ENDEXEC.
EXEC SQL PERFORMING loop_output.
SELECT ID_NUMERIC, COMPONENT_NAME, COMUNA, RECORD_ID, STATUS, SAMPLED_DATE
into :datos from lims.SAMP_TEST_RESULT
where     date > '01-09-2010'
ENDEXEC.
EXEC SQL.
disconnect 'MYDB'
ENDEXEC.
How can i get the data from that date?? If i delete the where statemet, the program works well, it takes 30 mins and show all the data, I just need the data from that date.
Any help
Regards

Please refer the example in this link which deals with Oracle date format.
You can finnd a command DECODE which is used for date formats. If you have a look at whole theory then you will get an idea.
Link:[Bulk insert SQL command to transfer data from SAP to Oracle|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bulk-insert-sql-command-to-transfer-data-from-sap-to-oracle-cl_sql_connection-3780804]

How to retrieve Data from SAP BW to SQL

Similar Messages

Maybe you are looking for