How to retrieve the creation date of clients ?
Dear all,
I have few DEV clients which are copied from Production clients. When want to perform client deletion I want to delete the oldest client in DEV. But which is the oldest client ?
Is there a table or tcode that can show me when are those DEV clients created ?
What I am doing now is very time consuming, i have to login to production, execute SCC3 and find out when is the client exported and what is the TR number. Then in DEV i execute SCC3 to find out which DEV is created with what TR number.
By doing this i will know
a.) The DEV client is a copy of PRD as per which date.
b.) and when is the DEV client created.
In SCC4, it has the information of when is the client changed, but not when it is created.
In SE16, table T000 refers to same info in SCC4 as well.
Your advice and input are highly appreciated.
Thanks.
Regards,
Kent
Hi Juan,
Follow your steps, I got below output, but no "Data record created".
Parameters for Analysis:
System ID: PRD
SAP Release: 700
Client: 199
Date : 28.05.2009
Time: 20:29:01
User: KENT
Selected Period
From (date/time) 22.05.2005 00:00:00
To (date/time) 28.05.2009 20:28:18
Selected Customizing Objects:
T000 S Clients
Analysis without archived log data
No logs found for the selected period
Then I clicked on "Logging: Display status" it says "Logging is switched off".
Questions
a.) This will only work when the logging is turn on, right ?
b.) Assuming the logging is turn on and i manage to get the creation info, at table level how do i retrieve the same info ? Because if I have 10 clients, i hope to see all the info and dates at one glance.
Please advise.
Thanks.
Regards,
Kent
Similar Messages
-
How to get the creation date of an event/meeting
I need to implement some control rules on booking conference rooms depending on the creation date and start date.
For example:
- the booking cannot be accepted if the meeting start date is less than 2 hours ahead
at 3:00 PM I can book the conference room for a meeting starting at 5:05PM
but not for a meeting starting at 4:55PM
- the booking cannot be accepted after 5:30PM for a meeting starting the next morning before 10:00AM
at 5:45PM I can book the conference room for a meeting tomorrow at 11:00AM, but not for a meeting at 9:45AMHi Michel,
how to get the creation date of an event/meeting?When you use the calendar sdk to fetch a meeting there is an Icalendar(http://www.ietf.org/rfc/rfc2445.txt) property called CREATED with the creation time in UTC.
For example:
- the booking cannot be accepted if the meeting start
date is less than 2 hours ahead
at 3:00 PM I can book the conference room for a
meeting starting at 5:05PM
but not for a meeting starting at 4:55PM
You would want to implement these rules with with the sdk? That would implie that users connecting to the calendar server with any other client than the calendar sdk could still book these resources whenever they want.
Or you would want to go an validate all the meetings once they are already created?
Cheers,
Jean-Philippe -
How to find the creation date for a released requests..
Hi friends ,
In se09 tcode , we a date which represents the last changed date .. Now , for a particular Released request i want to find out the Creation date for it . How can i find it . I checked the tables like E070create there also we have requests that not released yet , i have also checked se03 and other tcode and a fn mo dules like TR_READ_GLOBAL_INFO_OF_REQUEST .
So how to find the creation date for a released requests. Iam waiting for ur inputs..
Thanks in advance..hi,
Did u found the way to get the request creation date?
I also need the same information.
This needed for audit purpose........so it is must.
Please help me in this.
Best regards,
vinod -
How to determine the creation date/time for a file?
The important operating systems maintain both a creation date/time and last modified date/time for files. But in the File class there is only a lastModified() method. How does one determine the creation date/time for a file?
As far as i know, there is no way to know creation time, since it is a OS dependant information.
-
To know how to find the Creation date, Assignement date and Activation date
Hi All,
Can you please guide me to find the answer for the below mentioned questions:
Apart from Change log ,
1, Creation date
May I know is there any approach to find the Creation date of a particular Pricing condition type.
2. Assignment date -
How to find the assignment date of a particular condition type to a pricing procedure.
3. Activation Date -
May I know is there any to find out the date of Activation for the Customer hiearchy in T code VDH1N
Presently I'm working on SAP ECC 6.0For the above question I tried T codes and table but I'm not able to find out exactly. Even in Change logs I'm not able to get it.
Can you please guide me where I'm missing.
Thanks in Advance
Thanks & Regards,
PugalHi,
Something like this
select table_name, created from user_objects where object_type = 'TABLE'Regards
Anurag Tibrewal
Oops: I did not see the requirement correctly. If auditing is not the option for you then logminer (if archive is present) else no other option i can think of.
Edited by: Anurag Tibrewal on Oct 6, 2009 8:37 PM -
How to find the creation date of a column in a table?
Hi,
i scroll all the view and table of the Oracle RDBMS catalog and i didn't find how i can find when a column has been added to a table.
Is there a way i can find this info?
The column added is not the same date tehn the date of the table creation or the analyse column.
ThanksHi,
Something like this
select table_name, created from user_objects where object_type = 'TABLE'Regards
Anurag Tibrewal
Oops: I did not see the requirement correctly. If auditing is not the option for you then logminer (if archive is present) else no other option i can think of.
Edited by: Anurag Tibrewal on Oct 6, 2009 8:37 PM -
How to retrieve the Application Data from the Time Machine Backup, into newly Installed OS X Lion
Hi!
I recently intalled a clean Mac OS X Lion on my system, I was having Snow Leopard (10.6.8) before. So before the format of the hard drive I have taken the full backup of the system by Time Machine.
Now, after the fresh installation of Lion, I want to retrieve the data of diffrent previously installed applications like iPhoto, Address Book or iCal and so.. but certainly I want to retrieve the data only, not the full application (since they are the older versions of the application). How I can have the data of these applications into the new OS X Lion's blank Applications..!?
Please give some solution.
Thank you very much.Lion hides your home library
there are 3rd party programs to help. having a CLONE of your old system often trumps what TM alone offers.
And it makes sense to start a new TM backup set on another drive and keep the old one intact.
Lion Community and TM section might be worth a visit.
http://www.apple.com/support/timemachine
There are also some tech articles on Lion's Migration Assistant -
How to retrieve the basic data text in material master to SAPSCRIPT?
Besides using the function module READ_TEXT in the calling program, what alternatives are there if I don't want to modify the program but make changes in the sapscript only?
I've tried to use the include statement in the sapscript editor, but I don't know how to call the text object whose ID is GRUN, object is MATERIAL.
Should I use the include statement or any other ways to do it?
Thanks.Thanks for replying this message.
But the problem is that the object is not found,
as I tried to print &SAPSCRIPT-SUBRC& and 4 is resulted.
I've tried:
/:INCLUDE &MARA-MATNR& OBJECT MATERIAL ID GRUN LANGUAGE &SY-LANGU&
and
/:INCLUDE &ISEG-MATNR& OBJECT MATERIAL ID GRUN LANGUAGE &SY-LANGU&
But nothing is displayed. Anything wrong? -
How to retrieve the large data from the database
in my program, I want to operate the data retrieved from the database. but there are too many rows in the ResultSet . so when I try to get the ReusltSet from the database, the error of "java.lang.OutOfMemoryError
" will appear . because there are two million rows contained in the ResultSet, So I want to know whether there are some methods to deal with this problem.
anyone can give me some tips or recommend some papers and books to me.
thanks!!!!the program is developed for the data warehourse, you know there is a large number of data in data warehourse. so I think I have to deal with the very large ResultSet in my program, this code is a example for my problem :
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
public class Untitled1 {
String user = "";
String password = "";
public void createTable() {
try {
Class.forName("com.sybase.jdbc3.jdbc.SybDriver");
System.out.println("Good to go");
String url = "jdbc:sybase:Tds:59.64.137.240:5000/TJ";
Connection conn = DriverManager.getConnection(url, user, password);
System.out.println("connect successfully!");
// Statement st1 = conn.createStatement();
String sqlsentence2 = "SELECT DISTINCT caller FROM upcdr";
PreparedStatement st2 = conn.prepareStatement(sqlsentence2);
PreparedStatement st3 = conn.prepareStatement("INSERT INTO callerTable VALUES(?)");
System.out.println("createstatement successfully!");
// String sqlsentence1 = "CREATE TABLE callerTable (caller CHAR(18))";
// st1.executeUpdate(sqlsentence1);
// System.out.println(sqlsentence1);
// st1.close();
ResultSet rs = st2.executeQuery();
while (rs.next()) {
st3.setString(1, rs.getString("caller"));
st3.executeUpdate();
System.out.println(rs.getString("caller"));
st2.close();
st3.close();
} catch (SQLException e) {
e.printStackTrace();
System.out.println(e.getMessage());
System.out.println( e.getSQLState());
System.out.println( e.getErrorCode());
} catch (ClassNotFoundException e) {
e.printStackTrace();
public static void main(String args[]) {
Untitled1 cct = new Untitled1();
cct.createTable();
}at here, the table "upcdr" is very large, it has two million rows. when I run this program , the error will happen. someone told me that if I use the cursor, because it will retrieve one row from the database every time, so it will not produce a very large ResultSet, then the memory would not be used out. but I am not familiar with that aspect. so I think if anyone can give me some advice.
thanks!!!! -
How to retrieve the xml data into datagrid in vb6.0 using dom method
<?xml version="1.0" standalone="yes"?>
<Student_Details>
<Student>
<Name>sandeep</Name>
<Age>12</Age>
<Mobile>123456789</Mobile>
</Student>
<Student>
<Name>ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>
<Student>
<Name>Sandeep Pr</Name>
<Age>12</Age>
<Mobile>9865231870</Mobile>
</Student>
<Student>
<Name>ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>
<Student>
<Name>ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>
<Student>
<Name>ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>this forum is for vb.net, for vb6 you could try
http://www.vbforums.com/forumdisplay.php?1-Visual-Basic-6-and-Earlier
http://forums.codeguru.com/forumdisplay.php?4-Visual-Basic-6-0-Programming
PS. vb6 is ancient software you might want to consider a language from this century -
How to retrieve the BRF+ function result data object of type table in ABAP
Hi,
I am calling a BRF+ function from Abap....If the result data object of the function is element then i am able to get the value back in ABAP...Suppose the result data object of the function is of table type,I couldnt retrieve the value....Can you please help me how to retrieve the table data object value of the function from abap....
Regards,
Dheepak.Hi,
Thanks carsten and Tiwari for your reply...
Tiwari,
I understand that if i know the data type of the result data object which i am going to get i can declare it my ABAP program and get the values....But i am developing a generic program which calls the various BRF+ functions based on the function id...So i am not aware what is the data type of the result data object....so is there a any way to handle this situation...Please advice...
Carsten,
I used the GET_DATA_OBJECT_STRUCTURE method of class CL_FDT_FUNCTION_PROCESS to get the data object structure...i am able to get whether it is an element or structure or internal table...
But is there any way to get the data type of the object...For example if it is going to be an element of type BELNR_D,is it possible to get the BELNR_D value in my program...Please advice...
Thanks,
Dheepak. -
How to retrieve the data from SAP-BAPI by using VB Code
Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
oZEmp_Header.Value("ADDR1") = txtAddr1.Text
oZEmp_Header.Value("ADDR2") = txtAddr2.Text
oZEmp_Header.Value("CITY") = txtCity.Text
oZEmp_Header.Value("PHONE") = txtPhone.Text
boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
x = oreturn.Value("Message")
If x = "" Then
MsgBox "Transaction Completed!..."
Else
MsgBox x
End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
SapConnection.logoff
SAPLOGIN = False
Exit Sub
LogoutFehler:
If Err.Number = 91 Then
Exit Sub
Else
MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
Set FunctionCtrl = CreateObject("SAP.Functions")
Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
SapConnection.Client = "010"
SapConnection.Language = "EN"
SapConnection.System = "PR1"
SapConnection.SystemNumber = "00"
'SapConnection.Password = ""
SapConnection.GroupName = "PR1"
SapConnection.HostName = "168.9.25.120"
SapConnection.MessageServer = "168.9.25.120"
If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
Set SapConnection = Nothing
DoCmd.Hourglass False
MsgBox "No connection to SAP R/3 !"
SAPLOGIN = False
SAPLOG = False
Exit Function
End If
SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
If Not SAPLOGIN Then
If Not SAPLOG() Then
MsgBox "No connection to SAP !", 16
SAPLOGOUT
Exit Function
End If
End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
If func1.exception <> "" Then
MsgBox "Communication Error with RFC " & func1.exception
End If
DoCmd.Hourglass False
SAPLOGOUT
Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
MatDescr = "PART NO. NOT FOUND"
End If
End Function -
How to retrieve the data/property value from portalapp.xml
Hi I would like to retrive the some common data from the portalapp.xml file
<application>
<application-config>
<property name="PrivateSharingReference" value="com.sap.portal.htmlb"/>
</application-config>
<components>
<component name="DynZMMGR">
<component-config>
<property name="ClassName" value="DynZMMGR"/>
<property name="SecurityZone" value="DynZMMGR/high_safety"/>
<property name="ComponentType" value="jspnative"/>
<property name="JSP" value="pagelet/DynJspZMMGR.jsp"/>
</component-config>
<component-profile/>
</component>
<component name="dynpagedel">
<component-config>
<property name="ClassName" value="dynpagedel"/>
</component-config>
<component-profile/>
</component>
<component name="VARIANTLIST">
<component-config>
<property name="ClassName" value="com.sap.ep.r3rpts.VARIANTLIST"/>
<property name="SecurityZone" value="com.sap.ep.r3rpts.VARIANTLIST/high_safety"/>
</component-config>
<component-profile/>
</component>
<component name="DynZMM33">
<component-config>
<property name="ClassName" value="DynZMM33"/>
<property name="SecurityZone" value="DynZMM33/high_safety"/>
<property name="ComponentType" value="jspnative"/>
<property name="JSP" value="pagelet/DynJspZMM33.jsp"/>
</component-config>
<component-profile/>
</component>
</components>
<services/>
</application>
The above is my portalapp.xml file .
I want to retrieve the common data across the component.
These datas are common across the components .
I kmow by putting the data inside the
component name="DynZMM33">
<component-config>
<property name="ClassName" value="DynZMM33"/>
<property name="SecurityZone" value="DynZMM33/high_safety"/>
<property name="ComponentType" value="jspnative"/>
<property name="JSP" value="pagelet/DynJspZMM33.jsp"/>
</component-config>
<component-profile>
<property name="UserID" value="userid"/>
<property name="password" value="password"/>
</component-profile>
</component>
this becoms component specific ... which I can retriev the by using
String ClientVal = request.getComponentContext().getProfile().getProperty("Client");
in doContent() method ..
But this way i have to specify these properties in all the component.. which is repetetive in nature.
I would rather put it in common location and want to retrieve the info from the portalapp.xml...
How to achieve this
I am using "AbstractPortalComponent" .
thanks
pkiranHi Prashanth,
see Reading another iView's profile personalized values and Validate PCD URI
Anyhow, maybe you should implement a service which returns the values (from the service profile). This would be more clean for accessing global values.
Hope it helps
Detlev -
How can i change the Creation Date of a video (mts-Format)?
I work with Phohoshop Elements 13 an i use Online-Album (Revel)
My Problem:
I would like to change the Creation Date of a Video-File (mts-Format). I don't no why but the date (in Metadata) is wrong and i would like it to change. If i change it in Photoshop Elements the Date (Edit... Change Date...) it seems that the date has changed, but in reality in the Metadata is still the wrong date (see attachment).
Why this ist important for me:
The Adobe Revel (Online-Album) takes always the date from the metadata which is wrong.
Any idea how i can resolve my Problem?
How i can change the Metadata?Hi,
Did you get help ? Or do you have a work around ? I have about 20.000 Pictures and countless videos to organize myself.
I just ran into the same problem. Except that after a while Adobe will undo the changes I have made to the date.
Here's a screen shot I just made of one of the files.
Look at this one ! This one is really interesting:
After changing the date to : 1889 . Adobe changed it to 01.01.1970 00:59 -
How to retrieve the vendor number during creation of Purchase Order?
Dear SAP experts,
For our Purchase Orders, during PO creation (t-code ME21 or ME21N) we want to achieve the following:-
1) default the delivery address to our plant A address if the vendor is local and
2) default the delivery address to our plant B address if the vendor is foreign.
At the moment, we are trying to use the user exit enhancement "MMDA0001" to achieve the above.
The problem is how to retrieve the vendor number from the screen so we could pass the vendor number to ZXM06U32 to check the ktokk field in LFA1 table in the whether the vendor is foreign or local.
Thank you in advance.
Regards,
Alexu can do one thing, create 2 partner function, like 1 for local, and second for import vendor.
or make 2 batch n activate vendor batch and make mandatory field from SPRO.
then goto SHD0, and do one by one step. first time take 1st requirement and second time take second . like that make two variant .
i dont know how much it will be helpful. bt i want to suggest smth like that only.
or, go for ABAPER help
thanks
nisha
Maybe you are looking for
-
I upgraded my Firefox today(feb 29) at lunch and now firefox won't even launch!!?? help please!
I have a huawei ideos s7 and installed Firefox in December. Upgraded Firefox in January(I think) and it worked fine! Today I upgraded it again and now Firefox launches but immediately closes down.
-
How to connect java with oracle
can any body show me the code of how to connect java with oracle database. thank you
-
Urgh, another one that is bugging me. Can anyone get keep options to keep across pages for spanned columns. The headings should keep with the body text, but I have headings that split across pages, which is not a good look. For the moment I'm manuall
-
I'm downloading from Itunes and have come across error = 404 and 403. Anyone know what this is? Corrupted file maybe?
-
Urgency question, xa_start returned XAER_RMERR
i have an urgency question, tuxedo 6.5, oracle 8.1.7 when I used tpcall to call a service, which is in a server, tperrno returned 10(TPESVCERR). The service hase only one select statement as 'EXEC SQL select ...'. The ULOG file infomation : 082123.nz