How to retrieve the first digit of a number

Hi,
In my smartform (PO Form)I have to check a condition with respect of the first digit of company code. To be more clear i need to check that if the first digit of the company code is '1' (like in case of 1000, 1002, 1003 & so on) then my PO should be a 3rd party consignment. how do i do that?

Hi,
thanks for ur quick reply.
but i just wanted to verify that can i use this condition directly under the condition tab of my smartform as i never used like this.
Now i have put the condition like IS_EKKO-BUKRS+0(1) = '1'
And one thing to let u know that the filed size of company code is always same. i.e.4

Similar Messages

How can i search and retrieve the first word ...

How can i retrieve the FIRST or the SECOND word in a document stored in a file_datastore ?
Thanks
null

You noticed the first one yourself: the Found item list seems to randomly jump around the document -- I believe you are correct in your observation it may be due to the object construction order. That tells me, by the way, something about your lot numbers that tou didn't mention: your text is not one continuous long threaded story, but it's all or partially in disconnected etxt frames. The Found list does return everything inside a single story in the correct order, but it goes over each separate story in the order they were constructed.
The only solution is to gather all of your lot numbers, *re-sort* them according to the page number they appear on (and some sort of Worst Case Scenario is when you might have more than one lot number frame per page; in that case you also need to sort by textframe, top to bottom -- yet even worse is if you also may have these textframes side by side!).
Only then you have a reliable counting order.
This isn't too bad. We can just extend the method I offered for sorting top-to-bottom/left-to-right in Re: Working around the frame selection order issue in CS 4 and make it also include page numbers:
function byPageYX(a,b) {
    var
        aP = a.parentTextFrames[0].parentPage.index,
        bP = b.parentTextFrames[0].parentPage.index,
        aY = a.baseline[0],
        bY = b.baseline[0],
        aX = a.horizontalOffset[1],
        bX = b.horizontalOffset[1],
        dP = aP-bP,
        dy = aY-bY,
        dx = aX-bX;
    return dP?dP:(dy?dy:dx);
myResults.sort(byPageYX);
Or something like that.
As for actually implementing the above I cannot be of any help with Applescript.
Once we're dealing with sorting I think you're much better off in Javascript anyhow.

When I sort a column of figures, it sorts by the first digit. How do I get it to sort by the whole number?

I have a column of numbers, Specifically: 5.2, 42.0, 25.5, 2.4, 11.8, 0.9, 0.5. Notice how it has sorted by the first digit, not the whole number. In other words 5.2 is ranked higher than 42, because 5 is larger than 4. What do I turn on or off to make it behave sensibly?
Any answers would be appreciated.
Martin

Hi Martin,
Are the cells formatted as Text (left aligned, as in Column B)?
Data Format in Column C
Column C will sort as Number.
Regards,
Ian.

How to retrieve the values from a table if they differ in Unit of Measure

How to retrieve the values from a table if they differ in Unit of Measure?

If no data is read
- Insure that you use internal code in SELECT statement, check via SE16 desactivating conversion exit on table T006A. ([ref|http://help.sap.com/saphelp_nw70/helpdata/en/2a/fa0122493111d182b70000e829fbfe/frameset.htm])
If no quanity in result internal table
- There is no adqntp field in the internal table, so no quantity is copied in itab ([ref|http://help.sap.com /abapdocu_70/en/ABAPINTO_CLAUSE.htm#&ABAP_ALTERNATIVE_1@1@]).
- - Remove the CORRESPONDING, so quantity will fill the first field adqntp1. ([ref|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_WA.htm])
- - Then loop at the internal table and move the quantity when necessary to the 2 other fields.
* Fill the internal table
SELECT msehi adqntp
INTO TABLE internal table
FROM lipso2
WHERE vbeln = wrk_doc1
    AND msehi IN ('KL','K15','MT').
* If required move the read quantity in the appropriate column.
LOOP AT internal_table ASSIGNING <fs>.
CASE <fs>-msehi.
    WHEN 'K15'.
      <fs>-adqnt2 = <fs>-adqnt1.
      CLEAR <fs>-adqnt1.
    WHEN 'MT'.
      <fs>-adqnt3 = <fs>-adqnt1.
      CLEAR <fs>-adqnt1.
ENDCASE.
ENDLOOP.
- You could also create another table with only fields msehi and adqntp and then collect ([ref|http://help.sap.com/abapdocu_70/en/ABAPCOLLECT.htm]) the data to another table.
Regards,
Raymond

How to retrieve the vendor number during creation of Purchase Order?

Dear SAP experts,
For our Purchase Orders, during PO creation (t-code ME21 or ME21N) we want to achieve the following:-
1) default the delivery address to our plant A address if the vendor is local and
2) default the delivery address to our plant B address if the vendor is foreign.
At the moment, we are trying to use the user exit enhancement "MMDA0001" to achieve the above.
The problem is how to retrieve the vendor number from the screen so we could pass the vendor number to ZXM06U32 to check the ktokk field in LFA1 table in the whether the vendor is foreign or local.
Thank you in advance.
Regards,
Alex

u can do one thing, create 2 partner function, like 1 for local, and second for import vendor.
or make 2 batch n activate vendor batch and make mandatory field from SPRO.
then goto SHD0, and do one by one step. first time take 1st requirement and second time take second . like that make two variant .
i dont know how much it will be helpful. bt i want to suggest smth like that only.
or, go for ABAPER help
thanks
nisha

How to retrieve the java object in a proxy service in osb -- Plz help

Hi all,
I have a singleton java class which runs whenever the weblogic server gets started and store the output in its object. I need to access this java object from a proxy service in osb.
We tried using java call out and retrieved that object but we couldn't know how to parse that object into XML.
We are not sure of using the java call out in osb to solve this purpose because whenever we use a java callout, that particular java code will run which is not the case of singleton class.
So kindly help us how to retrieve the java object which holds the output without running the java code every time because its already run and holding the output in its object.
Regards
Prabhu

here the doc http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/context.html#wp1106656
but I guess you are already at the stage of getting a POJO in a first Java Callout and passing the POJO to a second Java Callout, which should then return it to OSB as a XMLObject.
My recommendation is to write a Java function which returns a XMLObject and uses a XMLCursor to populate it with the values of the POJO.
An XMLObject returned to the OSB is automatically transformed in a "XML" variable (which in reality is represented as a XMLObject in the Pipeline context)
Here some code sample:
http://www.javamonamour.org/2010/09/how-to-create-xmlobject-using-xmlcursor.html

How to retrieve the multiple rows data on PDF form in a web service method using WSDL DataConnection

How to retrieve the multiple rows data on PDF form in a web service method using WSDL DataConnection.
I have a multiple rows on PDF form. All rows have 4 textfields. I want to submit the multiple rows data to a method defiened in webservice.
Unable to retrieve the data in multiple rows within webservice method.

Hi Paul,
I'm now able to save the retrieved xml in a hidden text field and create dynamic table, and I'm able to fill this table from the XML, but the problem is that I could not find the correct way to loop on the xml, what I'm trying to say, the table will have number of rows with the data of the first row only, so can you tell me the right way to loop on the xml!
this is my code
TextField1.rawValue=xmlData.document.rawValue;
xfa.datasets.data.loadXML(TextField1.rawValue, true, false);
for(var i=0; i<count; i++)
xfa.form.resolveNode("form1.P1.Table1.Row1["+i+"].Num").rawValue = xfa.datasets.data.record.num.value;
xfa.form.resolveNode("form1.P1.Table1.Row1["+i+"].Name").rawValue = xfa.datasets.data.record.name.value;
Table1.Row1.instanceManager.addInstance(true);
Thanks
Hussam

HT201303 Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user posted the following:
I got some help from an apple assistant on the phone.
It is kind of round about way to get in
Here is what he said to do and it is working for me...
1) on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
2) Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
3) sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
4) At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

How to retrieve the gl account of a vendor

hi
anybody knows how to retrieve the gl account of vendor - lifnr

>
sia anjali wrote:
> no, not the reconciliation account but the gl account itself
>
> I was doing the tcode F-65, when I select the vendor, I find the gl account displayed and its not the reconciliation account
>
> when i did a F1 on it, it says BSEG-HKONT, this is not the master table, right?
>
> thats why i was asking
yes, it is the reconciliation account of the vendor, and it comes from LFB1-AKONT (except in case of special G/L). Depending on the customizing you can change this account (only to another reconciliation account), but first you see what comes from the table.

How to Retrieve the Selected Values from selectOrderShuttle using ADF 11g

Hi Every One,
Does anyone has idea how to retrieve the selected Items using shuttle and Order of the items using 'SelectOrderShuttle' component ?
Thanks

shuttle's valuechangeevent would fire when you shuttle items back and forth.
    public void selectOrderShuttle1_valueChangeListener(ValueChangeEvent valueChangeEvent) {
        ArrayList list = new ArrayList(Arrays.asList(valueChangeEvent.getNewValue()));
        if (list != null){
            for (int i=0; i<list.size(); i++) {
                int l = list.size()-1;
                val = list.get(l).toString(); //returns , delimited string
                if (val != null){
                    val = val.replaceAll("[\\[\\]]", "");
                    StringTokenizer st = new StringTokenizer (val, ",");
                    int nto = st.countTokens ();
                    for (int j = 0; j < nto; j++)
                        String token = st.nextToken ();
            ..........

My music files etc were all located on my old laptop which was stolen. I have just plugged my iphone in to my new computer and it has deleted all my files. Has anybody got any ideas on how to retrieve the files?

My music files etc were all located on my old laptop which was stolen. I have just plugged my iphone in to my new computer and it has deleted all my files. Has anybody got any ideas on how to retrieve the files?

WINDOWS?
Connect the iPod to your PC. If iTunes starts syncing (ie erasing) your music automatically, hit the X in the upper right hand corner of iTunes display, to the left of the search box, to stop it.
In Control Panel, Portable Media Devices, double-click your iPod.
In the Tools menu -> Options, in the View Tab, check "Show hidden files and folders."
Navigate to the Music folder. On my 'pod, the full path is
Portable Media Devices\NAME of IPOD (F:)\iPod_Control\Music
Select all the music folders, and drag and drop them into a folder on your hard drive, or directly into iTunes.
And you're done! The iPod music folder structure is strange and inexplicable, but once you move your files into iTunes you can set it to automatically organize your folder by artist and album to clean that up. (To do this, in iTunes Edit menu, choose Preferences and in the Advanced tab, check "Keep iTunes Music Folder organized."
might be out of date worth a try

How to retrieve the data from SAP-BAPI by using VB Code

Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
    oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
    oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
    oZEmp_Header.Value("ADDR1") = txtAddr1.Text
    oZEmp_Header.Value("ADDR2") = txtAddr2.Text
    oZEmp_Header.Value("CITY") = txtCity.Text
    oZEmp_Header.Value("PHONE") = txtPhone.Text
    boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
    x = oreturn.Value("Message")
    If x = "" Then
        MsgBox "Transaction Completed!..."
    Else
        MsgBox x
    End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.

I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
    SapConnection.logoff
    SAPLOGIN = False
Exit Sub
LogoutFehler:
    If Err.Number = 91 Then
        Exit Sub
    Else
        MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
    End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
   Set FunctionCtrl = CreateObject("SAP.Functions")
   Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
   SapConnection.Client = "010"
   SapConnection.Language = "EN"
   SapConnection.System = "PR1"
   SapConnection.SystemNumber = "00"
   'SapConnection.Password = ""
   SapConnection.GroupName = "PR1"
   SapConnection.HostName = "168.9.25.120"
   SapConnection.MessageServer = "168.9.25.120"
     If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
         Set SapConnection = Nothing
         DoCmd.Hourglass False
         MsgBox "No connection to SAP R/3 !"
         SAPLOGIN = False
         SAPLOG = False
         Exit Function
      End If
    SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
    If Not SAPLOGIN Then
        If Not SAPLOG() Then
            MsgBox "No connection to SAP !", 16
            SAPLOGOUT
            Exit Function
        End If
    End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
    If func1.exception <> "" Then
        MsgBox "Communication Error with RFC " & func1.exception
    End If
    DoCmd.Hourglass False
    SAPLOGOUT
    Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
    MatDescr = "PART NO. NOT FOUND"
End If
End Function

How to Capitalize the first letter or an entire word using a shortcut on the keyboard just like in microsoft that uses shift+F3

please how can one How to Capitalize the first letter or an entire word using a shortcut on the keyboard just like in microsoft that uses shift+F3

What do you mean there was "no effect?" I'm not aware of any effects.
It looks like that Service is also in the App Store. From their screen shots, the services are prefaced with WordService:
You can see an example in the App Store for their app: App Store
After installing, you should now have those text services in your Services menu. You can then add shortcuts in the Keyboard System Prefs.
Most Apple apps have a Transformations menu in the Edit menu. You can Make upper, lower, and Initial caps with those. I would stick with Word Services, but you can make Application Shortcuts for the items in the Transformations menu.
Again, in Keyboard System Prefs, Under Applications, Click the Add button on the right side pane.
Set it for All Applications
Enter the menu command exactly as they appear in the Transformation menu (separate entries for each),
Make Upper Case
Make Lower Case
Capitalize
Give them a shortcut.

How to get the first day in the month from a domain date ?

Hi,
I like to know how to get the first day in the month from a domain date?
Thanks
Stephen

Hi Gokul...
Instead of using the funtion module you can just write the 3 statements of code to get the first day of the week.
Its similar to the above one but instead of writing case statement you can achive the following.
data : w_res type i,
w_data type d,
w_res = w_date mod 7.
w_date = w_date - w_res.
write w_date.
This works.
Regards,
Siddarth

How to get the FIRST DAY OF THE CURRENT MONTH

how to get the FIRST DAY OF THE CURRENT MONTH in oracle 9i.
plzzzzz send immedaily.advance thanks

TEST@test SQL> select trunc(sysdate,'MON') from dual;
TRUNC(SYS
01-OCT-06
TEST@test SQL>

How to retrieve the first digit of a number

Similar Messages

Maybe you are looking for