How to return text from Text Field?
I'm an experienced VB programmer, but new to Dreamweaver, and
web programming. I need to put the text just entered by the user in
a form text field into a field farther down in the form- like when
your mailing address automatically populates into a shipping
address field. How to do?
Thanks
Bill Spencer
HI,
If i understand for you purpose you need to use a select list with redirect.
Then you have to put in the text field the code for displaying the corrisponding cities related to the code you choosed from the select list.
However that depends a lot about data and your app itself: If i understand you assume the postalcode is unique for a given city?
hope it helps
Message was edited by:
Marcello Nocito
Message was edited by:
Marcello Nocito
Similar Messages
-
How to delete data from single field in a database table?
Hi guys,
Plz suggest me How to delete data from single field in a database table?
thnks,
pavanhi
in addition to abv details..chk this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb3aef358411d1829f0000e829fbfe/content.htm
http://dev.mysql.com/doc/maxdb/en/34/ee7fbd293911d3a97d00a0c9449261/content.htm
regards,
madhu -
How to store text field data from web dynpro application in pcd ?
Hi Forum,
I am new to web Dynpro.
I want to store user specific data (a text field value) from a wd application in PCD and access it every time the user runs the application.How can I achieve this?
Thanks,
Mickey.Hi
I created the "read" and "update" methods in my application service. How can I call them? I created and implemented the methods just like here: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/340fc0ea-0c01-0010-74bf-965b11031e77
Operations:
- readMyEntityService:
- updateMyEntityService
Implementation:
retValue = getMyEntityService().read(key);
getMyEntityService().update(dS0);
In Web Dynpro there is this update method with the code above (in my original post).
How can I call the update-method????????
Kind regards
Bettina -
How to hide text field item based on true or false cases in oracle apex
Hi,
I have a set of text Field items in oracle apex:
Order Number
Revision Number
When we open the report, revision should be hidden.
Only when the user enters unique order number (non-duplicate order numbers), revision number should be visible.
If he enters duplicate order number, revision number should be hidden.
Please help.Hi 2932464,
2932464 wrote:
Hi,
I have a set of text Field items in oracle apex:
Order Number
Revision Number
When we open the report, revision should be hidden.
Only when the user enters unique order number (non-duplicate order numbers), revision number should be visible.
If he enters duplicate order number, revision number should be hidden.
Please help.
Giving you example how to achieve this.
Step 1. Create three Page Items
1) P1_ORDER_NO - Text Field
2) P1_REVISION_NO - Text Field
3) P1_ENABLE_DISABLE_REVNO - Hidden,Value Protected - No
2. Create 3 Dynamic Actions
1) Disable revision number on page load
Event - Page Load
Action - Disable
Fire When Event Result Is - True
Selection Type - Item
Item - P1_REVISION_NO
2) Check duplicate order number
Event - Change
Selection Type - Item(s)
Item(s) - P1_ORDER_NO
Condition - is not null
Action - Execute PL/SQL Code
Generate opposite false action - Unchecked
Fire When Event Result Is - True
Fire on page load - Unchecked
Stop Execution On Error - Checked
Wait for Result - Checked
PL/SQL Code -
declare
l_count number;
begin
select count(*) into l_count
from emp
where empno = :P1_ORDER_NO;
if l_count > 0 then
:P1_ENABLE_DISABLE_REVNO := 1;
else
:P1_ENABLE_DISABLE_REVNO := 0;
end if;
end;
Page Items to Submit = P1_ORDER_NO
Page Items to Return = P1_ENABLE_DISABLE_REVNO
3 ) Enable and Disable Revision Number
Event - Change
Selection Type - Item(s)
Item(s) - P1_ENABLE_DISABLE_REVNO
condition - greater than or equal to
value - 1
Action - Disable
Fire on Page Laod - Unchecked
Generate opposite false action - checked
Selection Type = Item(s)
Item(s) - P1_REVISION_NO
Hope this helps you,
Regards,
Jitendra
DER_NO -
How to create text fields & assign values form sql in ADF
Hi all,
I am new to oracle ADF,
i want know how to create text fileds and how to assign the values to those fields from plsql.
Regards
Prakashhttp://technology.amis.nl/blog/3315/creating-an-adf-application-based-on-plsql-api-part-one-reading-data-as-a-collection-of-sql-type-objects
Hope this will help.
~Krithika -
How to populate text fields with data present in a table
Hi,
The page i'm building has got a select list for the primary key column and text fields corresponding to rest of the columns in the table.
upon selecting some value from the list, the data corresponding to that row should get populated in the respective items. I don't want to add source in each item. can't i create a process or something else where this is done for each item.
for eg there's a table with columns A(primary key) and B.
there is a text fields on this page.
this textfield should populate the data from the table whenever i submit the page such that teh value in B is select B from tablename where A = the selected value.
Thanks
DhirendraSo I assume page was not built using a wizard. Why on earth you would want to I dont know, but you could create an "After Header" pl/sql process to populate the relevant fields, assuming the id was know on entry to the page. If you want to select the id on the page and then populate the fields, guess you will need to use a "Text Field (always submits page when Enter pressed)" and then use an "On Submit" process to populate the items.
If you are using an Automated Row Fetch, remember to select "Set memory Cache on Fetch" in that process.
Hope this helps. -
Cant figure out how to add text fields etc. in dreamweaver, layout made in photoshop
hi all
ok... first of all i want to say im sorry for posting such a noob question, but im new to this, so please take a few minutes to help me out
so i have kind of an annoying problem.
ive made an webpage layoout in photoshop. ive made "boxes" i want to put my content in. i have sliced it and got it in to dreamweaver.
im gonna use the page for bloging and stuff so i would like go have an text field where i can edit text and then post it to the site. but the problem is that everytime i try to insert ext fileds etc, it dosent place correctly and its white and not big enough at all.... ill show you a screenshot to explain..
so yeah... u see the 3 "boxes", in the big one i want to be able to add text and since its not so big, i want to have a scroll bar in it. the two small ones are boxes i wud like to use for index or something (havent really figured out what i wanna have on the site yet)
ok... now i will show u what happens when i try to add the text area to the page.
yeah... so u are all able to see that this is not what i wanted to happen......
i want the textfield to be where the grey"box"is ... but it wont let me... also it gets all white... it wuld be nice to get it to have the color the grey box have
so help would be great
and btw, i dont have knowlege in html and css coding, so if u could explain it so i dont have to do coding in text, but only visual, it would be nice. yea im a naab...
thanks in advanceUse graphics apps for images only. DO NOT export HTML from Photoshop or Fireworks. The result is table based code that precisely fits the image slices and nothing else.
When you try to edit graphics app generated code in DW, your page layout will fall apart.
The following procedure is the workflow you should follow:
Part 1 - Initial Design
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Part 2 - Markup preparation
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
Part 3 - Layout and CSS
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
If you get stuck, post back with specific questions and a link to your test page.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
How to compare text field length with the length of input characers
I hae a problem with the length of text field
I want to fix the length of TextField by taking the length of attribute to, whihc i have to use in text field
Like i have set the max length of Attribut to 10 and set the length of textfield also 10.
But the problem is that if i enter 10 'i' it dosn't fill even half the space in TextField
And opposit if i enter 10 'W'
I wonder if there is a solution for this problem
i ma using True Type of Font* paint method in your own class that extends Canvas
* @param g where to paint e.g. printer, screen, ram
public void paint (Graphics g)
// display word "today" centred at x,y
FontMetrics fm = getFontMetrics( g.getFont( ) );
String wording = "today" ;
int xadj = fm.stringWidth( wording )/ 2;
// position bottom left corner of the text
g.drawString(wording , x-xadj, y );
// draw a red line from x1,y1 to x2,y2
g.setColor( Color .red );
g.drawLine( x1 , y1, x2, y2);
// draw an pre-existing Image. imX,imY is top left corner of the Image.
g.drawImage ( image , imX, imY , imWidth, imHeight , this);
} //end paint -
How to add Text fields while doing SO through LSMW-BAPI method
Hi Friends,
I am doing Sales Order data migration using LSMW-BAPI method. The BAPI that i'm using is SALESORDER_CREATEFROMDAT2
I am able to handle all the fields except for the text fields such "Material sales text" in the Item info and "Layoout Set Header Text" in the Header.
Please do help me in solving my problem in whatever possible way you can.
I am waiting for your reply.
Thanks in advance,
ur friendDear Gaurav Anand,
Thanks a lot.
Can you please be a more descriptive.
I am unable to handle the E1BPSDTEXT structure.
When I am giving the Text field, and the corresponding TEXT_ID , It is showing an error that the address is not handled properly.
Please explain me how to handle this error.
Once again Thanks in advance.
Warm regards,
Your friend -
Dynamic Action - How to enable text field based on a condition
Hi,
I have two text items. Need to create dynamic action for the following,
1. Order_type - Drop down values having CONSUMER & WHOLESALE.
2. Order_number- Text field
Order number should be disabled and only on selection of order type ,order number should be enabled.
Can someone please help me on this?Hi Gayathri,
Gayathri Venugopal wrote:
Hi,
I have two text items. Need to create dynamic action for the following,
1. Order_type - Drop down values having CONSUMER & WHOLESALE.
2. Order_number- Text field
Order number should be disabled and only on selection of order type ,order number should be enabled.
Can someone please help me on this?
Create two dynamic action
1. Make it order number item disable on page load.
Event : Page Load
Action : Disable
Fire When event result is : True
Selection Type : Item
Item : Your order number item
2 . enable and disable order number on selection of order type(assuming when order type is null it is disable otherwise it is enable)
Event : Change
Selection type : item
Item : your order type item
condition : is not null
True Action
Action : Enable
Fire When event result is : True
Fire on page load : True
Selection Type : Item
Item : Your order number item
False Action
Action : Disable
Fire When event result is : False
Fire on page load : True
Selection Type : Item
Item : Your order number item
Hope this helps you,
Regards,
Jitendra -
How to validate text fields in popup window
Hi All,
I need showing empty string validation as tool tip for the text fields (RichInputText) on popup window when clicking submit button. kindly advice on this.Hi
Below link me help u in implementing validation messages
http://andrejusb.blogspot.in/2008/04/adf-faces-rich-client-complex.html
Thanks
Nitesh -
How to get TEXT field in Maint. notification and transfer it to a container
Hi there!
May I know the steps on passing a value of the Text field VIQMFE-FETXT to a container so that I could use it for the Expression in the Workflow notification?
Please guide me on this.
Thanks a lot!
Regards,
ReymarHi Reymar,
to pass values to Custom WF.
use below code:
**************include
INCLUDE <cntn01>.
*********************************container declaration
swc_container lt_event_container.
swc_create_container lt_event_container.
*******************************filling container
swc_set_element
lt_event_container
'ZEMPNO' wa_req-pernr.
swc_set_table
lt_event_container
'ZUSER' zagents.
***********************here ZEMPNO , ZUSER , ZEMAIL is WF container Elements.
**************calling WF and pass values to WF using container
CALL FUNCTION 'EWW_WORKFLOW_START'
EXPORTING
x_task = 'WS96900063'
X_START_DATE = NO_DATE
X_START_TIME = NO_TIME
IMPORTING
Y_WORKFLOW_ID =
TABLES
x_container = lt_event_container
X_AGENTS =
EXCEPTIONS
invalid_task = 1
no_active_plvar = 2
start_failed = 3
general_error = 4
OTHERS = 5
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope it works!!
Regards,
Purvesh. -
How to make text field in tabular form as List of value (LOV)
So the problem is next:
I should to make field in tabular form as LOV(list of value (combobox)) to load there data form db. Could smb take me an advise how to make it.
Thanks.So thanks, I did it, it works. How now to make next: I selected Id from list and in the next column appears name with ID from DB. so how to make ondemand process i know (thanks to you), but how to get value from LOV that I selected to give it to Dynamic Action.
Thanks -
How to script text field based on checkbox selection
I've written a script to format specific text boxes based on what checkbox is chosen. However, I'm not sure what I need to script in order to CLEAR the text field once the checkbox is unchecked. As it stands now if the checkbox is selected it formats the text field with the necessary information, but if it's unchecked the information stays in the box. I'd like to be something like 'if all boxes are Off then display 0.00.' I've included the current script for reference
var one = this.getField("Emp 500");
var two = this.getField ("Emp+C500");
var three = this.getField("Emp+S500");
var four = this.getField("Fam500");
var five = this.getField("NC500");
var six = this.getField("Medical");
if (one.value == 'Yes') {six.value='70.70'}
else if (two.value ==
'Yes') {six.value='127.20'}
else if (three.value == 'Yes') {six.value='141.32'}
else if (four.value == 'Yes') {six.value='198.00'}
else if (five.value == 'Yes') {six.value='0'}
var one = this.getField("Emp 1500");
var two = this.getField ("Emp+C1500");
var three = this.getField("Emp+S1500");
var four = this.getField("Fam1500");
var five = this.getField("NC1500");
var six = this.getField("Medical");
if (one.value == 'Yes') {six.value='61.47'}
else if (two.value == 'Yes') {six.value='110.49'}
else if (three.value == 'Yes') {six.value='141.32'}
else if (four.value == 'Yes') {six.value='123.04'}
else if (five.value == 'Yes') {six.value='0.00'}Hi Gayathri,
Gayathri Venugopal wrote:
Hi,
I have two text items. Need to create dynamic action for the following,
1. Order_type - Drop down values having CONSUMER & WHOLESALE.
2. Order_number- Text field
Order number should be disabled and only on selection of order type ,order number should be enabled.
Can someone please help me on this?
Create two dynamic action
1. Make it order number item disable on page load.
Event : Page Load
Action : Disable
Fire When event result is : True
Selection Type : Item
Item : Your order number item
2 . enable and disable order number on selection of order type(assuming when order type is null it is disable otherwise it is enable)
Event : Change
Selection type : item
Item : your order type item
condition : is not null
True Action
Action : Enable
Fire When event result is : True
Fire on page load : True
Selection Type : Item
Item : Your order number item
False Action
Action : Disable
Fire When event result is : False
Fire on page load : True
Selection Type : Item
Item : Your order number item
Hope this helps you,
Regards,
Jitendra -
How to extract data from xml field to dropdown list?
Hi,
I have designed a form and connected to a SQL server database using a web service. The XML data retrieved from wsdl connection is currently hold in a text field called 'XMLfield'. I need to extract the data such as 'PersonnelName' from XMLfield into a dropdown list. I used the following code and I do not get any error, but nothing come up and all my fields in the forms become bank when i click the dropdown list.
I would appreciate it if anyone can help me with this issue.
form1.DropDownList::click - (JavaScript, client)
xfa.datasets.data.loadXML(form1.XMLfield.rawValue,0,1);
form1.XMLfield.rawValue = xfa.datasets.data.saveXML();
var dataGroup = xfa.resolveNode("xfa.data.Timesheet.Personnel.PersonnelName");
var dataGroupLength = dataGroup.nodes.length;
if (dataGroupLength == 0) {
xfa.host.messageBox("There are no parts in the XML doc");
else {
for (var i=0; i < dataGroupLength; i++){
this.addItem(dataGroup.nodes.item(i).nodes.item(0).value);
Thanks,
RoyaHi Roya,
I think the loadXML will override your form data, so blanking out your fields. You could try loading the xml data at the xfa.datasets level (that is xfa.datasets.loadXML(form1.XMLfield.rawValue,0,1);) or using E4X to process the XML.
Another option though might be more rework is to use the Acrobat SOAP api which will return you a JavaScript object so you wont have to do any XML work.
There's a good intro to the SOAP api here, http://www.avoka.com/blog/page/11/.
Regards
Bruce
Maybe you are looking for
-
I am trying to open a service request and the site does not work.
I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work
-
Add another e mail address to my apple id
I wish to add a second e mail address to myiMac without opening a second account
-
Yesterday, as usual was going to charge my iPad, it was at 1%. Well, I took my ipad charger (original Apple official, I want to clarify that as a first step, I'm using the brand products than Apple) and plugged into an outlet ... The ipad began loadi
-
How to set render false for OALink Bean
Hi friends, is it possible to set render false for OALinkBean. i am using the following code but it is not working OALinkBean LinkBean = (OALinkBean)webBean.findChildRecursive("subTabLinkThree"); if(projectType.equals("XYZ")) LinkBean.setRendered(fal
-
I am attempting my first simple Labview DAQ project, though I am more comfortable with Signal Express. My torque sensor has a +/- 5Vdc, 60 pulse/revolution speed output. The speed will be up to 200 RPM, so I was aimed towards a NI 9402 High Speed Dig