Ipad 4 not charging with the ORIGINAL Power adapter that came in the box. Can't charge my iPad. I plugged in on PC all night and has been charged to 7%

Yesterday, as usual was going to charge my iPad, it was at 1%. Well, I took my ipad charger (original Apple official, I want to clarify that as a first step, I'm using the brand products than Apple) and plugged into an outlet ... The ipad began loading the first two minutes , then I got a notification telling me that the iPad could not charge with the charger.
I was quite surprised by the announcement. I disconnected and reconnected it .... again, I received the same notification. Then I disconnected and tried it on another outlet ... anything, yet. then I tried it on another outlet and ipad started charging. but after a while I had the same notice, not paying attention to that. I left it charging and I removed roughly 25% that of fear for something to happen. also remembered that situation (made 2-3 months ago where the iPad was not charging but after waiting a while disconnected, reconnected it and loaded normally).
so I decided to wait to re-connect the iPad to the outlet. This time, I plugged it into the outlet (fully discharged) at night and expected to find it loaded in the morning. But my surprise is that it still is off, it did not load anything.
I Bought the iPad in December 2012. Do you think that my iPad is hurt?
What can I do? Ay recommendation?
Please, HELP ME!

Try giving your iPad a reset. Hold down the sleep and home keys until you see the silver apple. Let it reboot and try again. You may also want to swap out the cable, just to confirm or rule out that it's bad.
If none of those fixes work, make the appointment at your apple store and have them check it out.

Similar Messages

My ipad ran out of battery and has been charging for an hour and won't turn on

my ipad ran out of battery and has been charging for an hour and won't turn on, it shows the charging from flat sign and nothing happens, please help, ive tried home and power

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to distinguish the type of object that came in the JMS message.

I have a queue that has 4 different object's being sent through messages across the queue. Depending on the object that comes in I need to determine what process to start. I have created a master project with a single queue listener that will start the master process. Either before the listener starts the master process or after the master process starts in a method I need to figure out the type of object that was contained in that method. In Java its simply if(msg InstanceOf ObjectB), else if (msg InstanceOf ObjectC)....and so forth. What is the way this would be done in ALBPM6.0's fuego code or whatever it is called?

In case you had an ID, which is assigned automagically on emp, this could also be written like this:
create trigger emp_trig
after insert or update or delete on emp
for each row
begin
insert into emp_log values(
:new.empno, :new.ename,
decode(nvl(:old.id,-1),-1,'Insert',decode(nvl(:new.id,-1),-1,'Delete','Update')), sysdate);
end;
..where -1 is a value you do not expect to be propagated ever in id column. Also, :new.empno and :new.enmae will be null if the dml being executed is a delete statement.

My ipad is not charging with 10W usb power adaptor ? what are the causes?

My Ipad is not charging with the 10 W USB Power Adaptor Charger ? Please tell me .....What can be the issues with solutions to resolve them ? Even when the USB is connected to computer it is not charging , however , the transfer of data is taking place including Sync. Is there a problem with the charger or the ipad please isolate & inform. Thanks.

1. Clean docking port with clean paint brush
2. Try another cable
3. Try another charger

I recently bought a mac book air (mid 2013) and the power adapter that came with it does not fit into the port.

The port has a small silver knob next to the pins that is preventing the adapter from connecting. I've never seen a port that looks like this and the tech specs say that the port should be a magsafe 2. Has anyone seen anything like this before? I've included a picture

You can return a new Mac within 14 days of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.

Reason for the 2 Power Adapters that came with the Macbook?

New macbook owner here. whats the deal with the power adapter? one connection to the wall can simply be latched onto the white square, im sure you know what im talking about. like an ipod wall charger.
the second is the most traditional one when it has a long cable connecting to the wall and then to the white apple square thing.
whats the point of each one? is the longer one for better home and the small connecting one most portable? if this is the case which charges better? no difference? whats the deal? im so confused!

One is used as an extension for the other. I think it shows that in the manual

Where can I go to download the original drivers & mediasource that came with my Zen Xt

I keep getting errors when trying to transfer all my songs from my Zen Xtra to my PC when using both Mediasource 5, Sync Manager and Nomad Explorer. Creative say it is because I'm still running on the original firmware and would need to upgrade. However - doing so will delete all my songs!
It worked fine when I transferred using my original drivers and organiser that came with the player however I have lost the disc (!!!). Does anyone know where I can download them? There is only updated software on the creative downloads page.
My Vision M comes tomorrow and I can't get my songs off my Zen for it!
Thanks very much for helping.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

My iPod shuffle (4th generation) battery is dead and will note charge. It is one year old and has been charged about 4 times.

I tried charging it last night. The shuffle got very warm and did not charge. The indicator light was not on. I just tried hooking it up to the computer with iTunes running and it has been plugged in for 3 hours. It is cool to the touch this time.

The standard warranty is for one year from date of purchase. So, if there is a hardware fault, you may want to have it checked under warranty. If there is a nearby Apple Store, you can do so with an Apple tech support person at the Genius Bar. To make a reservation, use the store's web page
http://www.apple.com/retail/

My Mac book will not turn on? It charged all night and has never had a problem?

My MacBook will not turn on? Plugged in or without power cord attached. Charged all night. No previous problems?

Ok. Think I fixed it. I took the battery out for 10 seconds, reinstalled it and now it's up and running.

HT1476 I'm using the Apple Brand cord and power adapter that came with my iPhone 5C, but I still get the "This accessory is not compatible" error. Any ideas as to why?? Please help!

I have no idea why it does that. I have it plugged into an extension chord if that helps.

Plug adapter directly into wall socket. If still problem, all components are covered by Warranty. Make Genius reservation and take iPhone, wall adapter, and Lightning USB cable to Apple for resolution.

HT201412 My IPod Touch (4th generation) will not turn on at all. It has been charging all day and will only function if its plugged in but when its unplugged all you see is a blank black screen. Any ways to solve this?

I've only had this for maybe a year and it just quit working.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have iphoto 9 (version 8.1.2). When I opened up iphoto it said that I had 0 pictures (it had over a 1,000) prior. My screen saver was and has been set to a foler in iphoto and still displays the photos. How do I retrieve my pictures?

When opening Iphoto (Iphoto 9 version 8.1.2) I went from hundreds of photos to 0. I looked in my harddrive and could not locate the pictures under library or photos. I tried rebuilding the system (ctl. alt. and opeing the program). I would assume all my pictures are lost except for when my screen saver runs, I still see all of my old photos. How can I retrieve my photos?

go in to finder than photos they should be somwhere in there. after you find them select add to iphoto

TS2634 Can my iPad mini use the same 12 watt power adapter that the iPad uses?

The small one-inch square power adapter that came with the iPad mini no longer works. A Best Buy employee told me I should be using the larger 12 watt adapter that comes with the iPad. I don't want to damage my mini by using the wrong one. Help?

Absolutely no problem. The device will draw only as much energy as it can safely absorb. The 12W rating for the charger is maximum available power.
I've been using a 12W charger with my iPod for about a year now.

Does the 80w power adapter work for the 13" mackbook pro?

Any help would be appreciated... Thanks

You can use the power supply that came with your Mac or one that has a higher wattage, but not one with a lower wattage.
Specifically, in my home we have only 85W power supplies. They work fine with the older 17-inch Macbook Pro, a newer 15-inch Retina Display Macbook Pro, and with my daughter's Macbook Air 13-inch (which came with a 45-watt power supply that she leaves in her dorm room because she knows she can use these 85-watt ones when she visits).
The older style power supplies' magsafe plug can charge the older laptops as well as the newer Retina Display computers, but for the Retina Display laptops, you must use the small magsafe adaptor/converter along with the older style power supply.
I don't know of a way to use the newer power supplies that came with Retina Display laptops on an older laptop that accepts the older style magsafe adaptor.
If your original question was whether a power supply for a Retina Display computer can be used to charge a non-Retina Display 13-inch Macbook Pro, then I think the answer is NO because the Retina Display Macs use a different magsafe plug that won't fit into the slot for the 13-inch non-Retina laptop. The older power supplies CAN be used with the new Retina laptops because there is an adaptor one can get to allow the old magsafe plug to fit into the new Retina laptop.

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Ipad 4 not charging with the ORIGINAL Power adapter that came in the box. Can't charge my iPad. I plugged in on PC all night and has been charged to 7%

Similar Messages

Maybe you are looking for