How to Revoke an older request of an ABAP program

Dear All,
I wish an older version (before the last three modifications) of my ABAP program to be revoked on the production server. In other words I wish an older request of my current program to overwrite the current request, in between these two requests there are three more requests.
Please tell how to go about it.
Regards,
Alok.

Hi...
You can get back the Older Version....
If your program is deleted, but a version of it still exists.....
then go to <b>Utilities---->Versions----->Version Management</b>
There you can find all the Versions of your deleted program....of which choose any one version you want to retrieve....( check that checkbox ) and click on the retrieve pushbutton.. You will get a pop window....
Indicating that
The current version of the program
will be overwritten by an older version
This only applies to source code
Before it is overwritten, a temporary
version will be created.
So you just press enter on this window.....
Go back to SE38 and give the Program Name, an Inactive Version is retained...
You can now activate that and use it.....
This is the way how you can revert the changes made by you.....
Generally the concept of Version Management is very helpful whenever you go for Upgradation say for example from 4.6c to ECC 6.
Hope this solves your problem....
Reward if it helps you.....

Similar Messages

Urgent!! How to call a custom transaction or an ABAP program in BSP?

Urgent!! How to call a custom transaction or an ABAP program in BSP?
We are pretty new on BSP. Would be very appreciated if any expert here give us the detailed steps on how to build up the application to just call a custom transaction (e.g., t-code: ztest) or an ABAP program. Would we have to create a button or event handler to do that? And the detailed steps?
Thanks in advance and we will definately give you reward points!

hi Durairaj,
During the time to wait for your answer, we copied Bernd's code from your last link, but when activating it, get the 1st error msg:
Field "CLIENT" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement. "DATA" statement."DATA" statement. The error shows up here:
<td>
<htmlb:inputField id = "client"
value = "<%= client %>" />
</td>
Then we added Client to the page attribute and define it as type String, then get another error:
The field "EVENT" is unknown, but there is a field with the similar name "EVENT_ID"."EVENT_ID". This error shows up at the beginning in the Event Handler:
OnInputProcessing:
code
event handler for checking and processing user input and
for defining navigation
event handler for data retrieval
event = cl_htmlb_manager=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
button_event ?= event.
How to resolve this unknown Event error, need to define in Page Attribute tab? but with what type?
Actually we only want to run an ABAP4 program in BSP, the code is complicated, could you show us an easy way of doing this in BSP?

How To Call a Broadcasting Template within an ABAP program

I was wondering if anyone knew how to call the Broadcast template via an ABAP program so it will execute? The scenario that I have is we are doing validations via BW. We put the data (for conversion reasons) through validation rules and then load a data target. From this, there are 2 situations that could occur:
1) There are errors
2) There are not any errors
If #1 is true, then I would like to execute the Query Broadcasting Template that I have created. If #2 is true, then I would like to execute another process via the ABAP program. In the past, I was successful using exception reporting via reporting agent, since I was able to call that program but the report did not look good at all. Please let me know if there is a program that I could call in order to execute this broadcast that I have set up.
Best Regards,
Tim

Hello,
although this is an old threat, but do you have any hints on how to dynamically change the template when broadcasting?
kind regards
Murat

How to call a BW Query from an ABAP program?

How to call a BW Query from an ABAP program?

hi
check this link
/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-i
/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-ii
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
hope this helps
cheers

How to find the start condition of a ABAP program?

Hello Gurus!,
Could any one please explain how to find the start condition of a ABAP program?
like its a event based or time based?and also how to find that event and time..
Thanks in Advance...
Dinakar

Hi Dinkar,
Go to Job Schedule, put Job Step parameter as your program and see scheduled Job.
In Schedule Job double click to see start condition. and steps to see details and variant.
Hope it helps.
Thanks
CK

How can i get access code to create ABAP Program ?

hi guys ,
How can i get access code for creating ABAP Program in my System.
I am using SAP IDES 4.6 Version
Please Help me out .
Regards
Raghu

Hi Raghu,
- license your system (http://service.sap.com/licensekey)
- create a developer key (http://service.sap.com/sscr)
- create a key for your ABAP program (httP://service.sap.com/sscr)
Markus

How to delete cube old request by using abap code?

Dear experts,
Here is one thing need your help:
We have one cube need to delete the old request. This cube is loaded daily and only need to delete the request of that month.
I know there is one "Delete Overlap Requet" type in the process chain, but my concern is: in our DTP filter, different day the selection will have different values, let's say A and B, and A and B are not even overlap at all.
So my question is:
1. Can I still use "Delete Overlap Request" to delete the old request?
2. If so, I see it can be implemented by abap routine, can anyone give me some sample code? Like how to delete request only in this month. And how to delete request whose selection is equal to a specific value.
Note: one of the source cube is real time cube so can not delete the request from infopackage.
Any post will be appreciated and thank you all for your time in advance!
Regards.
Tim

Here is the intial code when I choose "Request Selection through Routine", please help me on how to choose the specific request and delete them in this routine.
program conversion_routine.
Type pools used by conversion program
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
    InfoCube        = ZPC_DEL_REQ_ZBPS_C01
form compute_ZPC_DEL_REQ_ZBPS_C01
tables l_t_request_to_delete structure rsreqdelstruc
using l_request like rsreqdone-rnr
changing p_subrc like sy-subrc.
*Insert Source Code to decide if requests should be deleted.
*All Requests in table l_t_request_to_delete will be deleted
*from Infocube ZPC_DEL_REQ_ZBPS_C01.
*Add new requests if you want to delete more (from this cube).
*Remove requests you did not want to be deleted.
$$ begin of routine - insert your code only below this line        -
     loop at l_t_request_to_delete.
     endloop.
     clear p_subrc.
$$ end of routine - insert your code only before this line         -
endform.

How can i print data in smartforms from ABAP program.

Dear gurus:
in my abap program i process require data, and saved in a internal table.
how can l print the data in smartforms.?
who can give me a code sample is better:)
reward all helpful advise.

Try this....
1) Tcode --> SmartForms
2) Form name --> Z_SF_TEST Create
3) Under Global settings
a) Form Interface
    Table Tab
   ITAB LIKE EKPO
b) GLOBAL Definitions
WA_NETPR LIKE EKPO-NETPR
In smart forms if we want to display quantity and currency fields. We can't directly display currency field and quantity fields
For that we have to create an extra variable in global definitions
Ex: netpr FIELD of EKPO
CREATE program lines and specify WA_NETWR = itab-netpr.
4) RT CLick on main Window
   CREATE --> TABLE
Click Table painter
DEFAULT %LTYPE will be Created
a) If you want more like Header footer etc add by rt click on %LTYPE1
Table (Tab)
%LTYPE Radio(SELECT) 5 CM 5 CM 6 CM
CLICK on DATA (Tab)
INTERNAL TABLE ITAB LIKE ITAB
5)RT click on table control and create --> program lines
General attribute (Tab)
INPUT PARAMETER               OUTPUT PARAMETER
itab                               WA_NETPR
Code Area
WA_NETWR = ITAB-NETPR.
6) RT CLcick on table ctl and create 3 text to display the fields
a) % text1 +button(insert field)
   FIELD name &itab-ebeln&
Output options (tab)
Check New line   LINETYPE   %Ltype1
check new cell
b) % text2
   & itab-ebelp&
output options
check new cell
c) % text2
   & wa_netpr&
output options
check new cell
<b>Report ac
Tables ekpo.
Data: itab1 like ekpo occurs 0 with header line.
select * into table itab1 from ekpo.
Call function module --> smart form function module and pass your internal table</b>
Regards,
SaiRam

How can I trigger an event from an ABAP Program

Hi everyone,
I have a requirement, where I have to create an ABAP program, that has to execute (trigger) an event which belongs to a Process Chain. when I run the program, the Process Chain has to run.
So, how can I do it?
Thanks for your help, Federico

HI ,
The program can call function module BP_EVENT_RAISE to raise the event. you can create vent in sm64 and sm62 .There you give the parameter of the event same as what you will define in the event of start variant of your process chian ..
Regards,
shikha

How to create relationship to call PO13 in ABAP program.

Hi,
Could anybody help me how to create relationship (like PO13) in abap program. Do we have any Function modules or any other way?
Regards,
Ram.

Hi,
You can use function module RH_INSERT_INFTY. There are plenty of threads of the forum on how to use it.
Donnie

How use a proxy consumer web service in ABAP Program with local interface

I generate a proxy class based on a WSDL file.
I want to use this class in an abap programm without a connection but using XML files in local.
I see with the class CL_PROXY_LOCAL_ADAPTER that it is possible to execute without connection but for use this, it's necessary to use the method REGISTER.
This method have two parameters : Class Name and Interface Name.
Class name is the name of my proxy class, but I don't know how to find the interface name.
I think that a local interface is needed to generate but I don't know how to generate in interface with entries in SPROXSIG table ?
Could you help me ?

Check out the following links to see if it meets your needs.. Has examples to call a ABAP proxy (that consumes a webservice) from ABAP program...
http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/frameset.htm (webservices ->webservices toolset -> examples)
http://help.sap.com/saphelp_dm40/helpdata/en/1a/b69d427cab0831e10000000a1550b0/frameset.htm

How to crate a spool number for the abap program

hi
how to create a spool number for the abap program

Hi,
Check this thread
how to create a spool requset for 'z program'.
Regards,
Satish

Plase can anybody tell me how to use SETS (GS01/02/03) in ABAP program

Plase can anybody tell me how to use SETS (GS01/02/03) in ABAP program

http://wiki.sdn.sap.com/wiki/display/Snippets/Reading+Sets+-+GS01+-+GS02+-+GS03

How to trigger an existing background job in ABAP program?which fm?

Hi experts,
    how to trigger an existing background job( defined in SM36 ) in ABAP program?which fm?
    seems that FM 'JOB_OPEN' / 'JOB_SUBMIT' / 'JOB_CLOSE' can only create a new job.

Hi,
    now my requirement is that sap has generated one job automatically, and then i will have a job name
'XXX'. and then i want to schedule the job in abap program,. which function module could i use ?
my expected fm is that the system will trigger the job after i give the job name and start condition.
i have tried job_open, but it seems just to create a new job. any advice ?

How to catch errors watched in sxmb_moni through abap program??

Dear Gents,
I have one scenario which is proxy -> xi -> jdbc. Scenario works fine when every thing is good, but if there are any errors in XI usually we catch the exception after calling the proxy as :
TRY.
    CALL METHOD cl_rfq_sapin->mios_rfq_sapin
      EXPORTING
        output = output
      IMPORTING
        input = input.
    COMMIT WORK.
CATCH cx_ai_system_fault INTO cl_system_fault .
    gv_system_fault = 'X'.
CATCH cx_ai_application_fault INTO cl_application_fault.
    gv_application_fault = 'X'.
ENDTRY.
But by this code we are able to know whether it is system error or application error. But we cant get actual error. To see the actual error we need to go to SXMB_MONI in XI. The some sample error in sxmb_moni is as follows :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://10.56.5.79:1433;databaseName=SXD': SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]The requested instance is either invalid or not running.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
So is there any way we can catch the above error in the abap program ??
Your responeses were highly appreciated.
Regards,
Santhosh

hi,
did you try using acknowledgments?
http://help.sap.com/saphelp_nwpi71/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
(code at the bottom of this page)
Regards,
Michal Krawczyk

How to Revoke an older request of an ABAP program

Similar Messages

Maybe you are looking for