How to run performance trace on a program

Hi All,
I need to run pefromance trace on a program that I will run in background. I think I have to use ST05 to run SQL trace. Could someone please confirm the steps?
1) Go to ST05
2) Activate trace with filter
3) Run the program in background
I am not sure about the steps after this. How do I view the report while trace is running? Should I wait till the program ends to view the report? It is taking a long time to run. Should I do any other performance analysis other than ST05?
Thanks.
Mithun

Hi Mithun.
I would like to suggest a few references,
[SDN Library - Standard Reference - How to analyze performance problems - Trace|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3fbea790-0201-0010-6481-8370ebc3c17d]
[SDN Library - Standard Reference for Performance Analysis in a Nutshell|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/86a0b490-0201-0010-9cba-fd5c804b99a1]
[SDN Library - Standard Reference - Best Practices for Performance Tuning|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Similar Messages

How to run function(s) on ANY program exit?

I can easily do this when someone selects "Exit" from the program's menu, with this code:
AllSortsOfExitCode()
System.out.println("Ok, everything is wrapped up. Now we will end the program.");
System.exit(0);
BUT...how do you get this code to run when someone clicks the little X in the upper-right hand corner?
I can't figure out how to do that.
I need to override the class destructor or something, but I don't think Java has destructors in the classic sense. I found one 4-page thread about "Java destructors" but it was just an argument between a couple people -- I didn't learn anything from it.
Thanks,
Matthew

CathInfo wrote:
BUT...how do you get this code to run when someone clicks the little X in the upper-right hand corner?
Thanks,
MatthewThe earlier replies cover the case you described above. But your thread title says something else:
How to run function(s) on ANY program exit?Answer - you can't. Power loss can't be handled. Shutdoen hooks can help with most other conditions, see
http://www.google.com/search?num=100&hl=en&c2coff=1&q=java+shutdown+hook&btnG=Search

How to run custom Oracle report6i concurrent program in web forms

I developed a custom report using oracle6i and registered into AOL and assigned to a request group. I can run this concurrent program from form based application works fine. How to run this concurrent request from web forms?
What are the steps to follow to create a concurrent program link on web forms?
I want run this request and pass parameters and output also in web forms...
I'm a first time user of web forms, So kindly reply with detailed steps to define concurrent request in web forms for a custom report.
Thanks in Advance
Naveen
[email protected]

I hope ur requirement to do all the CP processing from Self-Service OAF pages. If so,
browse thru Re: Start Concurrent from OA Framework page , Re: RE: Submitting concurrent request and getting the results back.
and
'Concurrent Processing: Request Submission and Monitoring' section in dev guide.
Let us know if you face any issues in the implementation.
- Senthil

How to run java older version java program with newer version 1.6.

Hello frds.....i have a one query regarding jkd newer version. I was using older version of jdk 1.4 for my java program and projects' work. Now i installed newer version of java 1.6 in my machine, so when i tried to compile and run my older version programs in the newer version, its showing many errors. So can anybody helps me on this query that how can i run my older version java programs in newer version 1.6 or what types of changes i will be do in my java programs.
Thanks in advance
Kshitiz

EJP wrote:
so when i tried to compile and run my older version programs in the newer version, its showing many errorsI doubt it. There is only one incompatibility between 1.4 and 1.6, and that is the introduction of the 'assert' keyword. (or did that happen in 1.4?)I believe that was the one and only incompatible change made in 1.4.
(Although I'm saying that from memory, and 1.4 was a long time ago -- so the "one and only" part could be wrong.)

How to run Perl script in Java program?

Some say that the following statement can run Perl script in Java program:
Runtime.getRuntime().exec("C:\\runPerl.pl");
But when I run it, it'll throw IOException:
java.io.IOException: CreateProcess: C:\runPerl.pl error=193
at java.lang.Win32Process.create(Native Method)
at java.lang.Win32Process.<init>(Win32Process.java:63)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:566)
at java.lang.Runtime.exec(Runtime.java:428)
at java.lang.Runtime.exec(Runtime.java:364)
at java.lang.Runtime.exec(Runtime.java:326)
at test.runPerl.main(runPerl.java:16)
Exception in thread "main"
Where is the problem? In fact, I do have a Perl script named "runPerl.pl" in my C:/ directory. Could anybody tell me why it can't be run? Thanks in advance.

Hello sabre,
First of all thanks for your reply.
I have tried like what you mentioned.
Eventhough, i could get the exact error message.
I could get the Exception
"Exception:java.lang.IllegalThreadStateException: process hasn't exited"
<code>
import java.io.*;
public class Sample{
public static void main(String args[]) {
String s = null;
Process p;
try
     p = Runtime.getRuntime().exec("tar -vf sample.tar");
     //p.waitFor();
     if(p.exitValue() == 0)
          System.out.println("CommandSuccessful");
     else
          System.out.println("CommandFailure");
catch(Exception ex)
     System.out.println("Exception:"+ex.toString());
</code>
In this code, i tried to run the "tar command". In this command i have given -vf instead -xvf.
But it is throwing
"Error opening message catalog 'Logging.cat': No such file or directory
Exception:java.lang.IllegalThreadStateException: process hasn't exited
CommandFailure"
"Error opening message catalog 'Logging.cat'" what this line means ie,
I dont know what is Logging.cat could you explain me its urgent.
Thanks in advance.
Rgds
tskarthikeyan

How to run the simple java card program in eclipse?

I am trying to run a simple HelloWorld program in eclipse 3.5 having java card development kit 2.2 installed in it.
Firstly,I go to the JCWDE tab and press start..then when trying to deploy that package its giving me error like " com.hw.HelloWorld: unsupported class file format of version 50.0." can any one help me in this what is this error???n how to resolve n run this program..

Hi,
It is because the converter works on byte code and it only supports a subset of the Java language (see the JC specifications). It is kind of like compiling you code on Java 6 and trying to run it on Java 5. The JCDK outlines the required compiler version.
Cheers,
Shane

How Can I perform the external abap programe transmit the internal table in

Hi,all
In Sapscript,I want calculate a internal table and return the changed table to Sapscript
I know used the transmit result variable for example:
/:PERFORM GET_MAKTX IN PROGRAM ZXX
/:USING &MATNR&
/:CHANGING &MAKTX&
/:ENDPERFORM.
How can I set Using with a table?
Thanks
Sun

Hi,
As per my knowledge it is not possible to pass the entire table at a time using PERFORM in PROGRAM ,,, USING and CHANGING.
Solutions:
1) If possible do the same thing in the Print Program:
    using CONTROL_FORM call element and print in the script
2) if you know the all table entries.: Pass all records at time:
Ex: PERFORM Pxxxx in PROGRAM PROGXXXX
      USING <MATNR1>
                <MATNR2>
                <MATNR3>..............
      CHANGING < MAKTX1>
                        <MAKTX2>
                         <MAKTX3>............
ENDPERFORM

How to run sscript shell with java program

Hi everybody,
i want to know how can i do to execute a script shelle (bash) with program java (if it s possible)
for example this script:
#!/bin/bash
echo "hello"
can i run it with java program or i have to make dome modifications .
thank you for your help in advance.

Well, if you want to be portable across platforms, you should write as much code in Java as possible and not rely on native scripts (I'm sure your script is more complex than this 'echo' example ;-) ).
Having said that, you can use the java.lang.Runtime class and in particular its various exec() methods.
Try something like this:
Process p;
try {
p = Runtime.getRuntime().exec("myscript.sh");
} catch (IOException ioe) {
}You can then "interact" with the spawned process with the Process object returned by the exec method.
Note you need to have the appropriate security rights.
For more details, look at the API documentation here:
http://java.sun.com/j2se/1.4.2/docs/api/
hth,
-Alexis

How to run rmiregistry by my own programe ?

Hello All,
i make a simple rmi application i want ,
when i start my rmiserver programe then it first run rmiregistry
auto means by my programming.
please any body help me.
i m thnksfull.
Arif.

I didnt understand ur problem. U want to write your own registry and run it or simply u want to run an existing registry from ur program.
If u want to run an existing registry from you program use following code in your program.
Runtime r = getRuntime();
Process p = r.exec("start rmiregistry");
Make sure that "rmiregistry" is in ur PATH.
Chatrapathy

How to run the jmeter through java program

i wnat interact jmeter through my java program
i will pass values to jmeter through my java program
i wnat retrive the results from jmeter to my java program

Read the manual.

How to improve the performance of the abap program

hi all,
I have created an abap program. And it taking long time since the number of records are more. And can anyone let me know how to improve the performance of my abap program.
Using se30 and st05 transaction.
can anyone help me out step by step
regds
haritha

Hi Haritha,
->Run Any program using SE30 (performance analysis)
Note: Click on the Tips & Tricks button from SE30 to get performance improving tips.
Using this you can improve the performance by analyzing your code part by part.
->To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
->To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
->Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
->Avoid for all entries in JOINS
->Try to avoid joins and use FOR ALL ENTRIES.
->Try to restrict the joins to 1 level only ie only for tables
->Avoid using Select *.
->Avoid having multiple Selects from the same table in the same object.
->Try to minimize the number of variables to save memory.
->The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
->Avoid creation of index as far as possible
->Avoid operators like <>, > , < & like % in where clause conditions
->Avoid select/select single statements in loops.
->Try to use 'binary search' in READ internal table. -->Ensure table is sorted before using BINARY SEARCH.
->Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
->Avoid using ORDER BY in selects
->Avoid Nested Selects
->Avoid Nested Loops of Internal Tables
->Try to use FIELD SYMBOLS.
->Try to avoid into Corresponding Fields of
->Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
edited by,
Naveenan

How to close Internet Explorer and other programs running on Windows?

In order for Flash Player to be installed or updated, any programs that use Flash Player must be closed. This includes Internet Explorer or other browsers, instant messengers, Skype, etc.
These programs may be running in the background, not as visible windows, but need to be closed anyway.
To close such programs use the Windows Task Manager. To start Task Manager, take any of the following actions:
Press CTRL+ALT+DELETE, and then click Task Manager.
Press CTRL+SHIFT+ESC.
Right-click an empty area of the taskbar, and then click Task Manager.
Once the Task Manager is running, select the Processes tab. On older Windows version you may need to click on the Process Name or Image Name header to sort the process names.
Now right-click on every process that the Flash Player installer needs to close (e.g. iexplore.exe), then select End Process.
It would be desirable if the Flash Player installer could perform that action by itself; I have therefore created an enhancement request. If you were affected by this problem, please head over to the Bugbase and vote for this request: https://bugbase.adobe.com/index.cfm?event=bug&id=3548136

See How to close Internet Explorer and other programs running on Windows?

How to run a Concurrent Program from the back end?

Hi,
How to run a Concurrent Program from the back end?
Is it Possible to see that Concuurent Request id which we run from the back end, in the front end?
If yes, then Please Give reply how to write the code
Thanks in Advance,
Bharathi.S

This is documented in Chapter 20 of the Application Developers Guide http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121devg.pdf. These MOS Docs also have some information available
221542.1 - Sample Code for FND_SUBMIT and FND_REQUEST API's
235359.1 - How to Launch Planning Data Pull MSCPDP using FND_REQUEST.SUBMIT_REQUEST
HTH
Srini

How to run the client program in weblogic 8.1 server

Hi
I am new to EJB 2.0. I am deployed sucessfully a session ejb program.
While running an ejb client program it throws an exception. In my session ejb program i created two jar file. one is sessionejb.jar and another one is sessionejbclient.jar. In sessionejb.jar contains home ,remote ,session bean class and deployment descriptor.In sessionejbclient.jar contains home,remote and client program. Both jar files are included in class path of environment variable( i am using Standalone server).
Plese guide me how to run an session ejb client correctly.
Regards
Jaiganesh

Both jar files are
included in class path of environment variable( i am
using Standalone server).did u include both these jars in the "weblogic's class path" ?
in that case, it obviously wont work.
what u need is an understanding of the following topics (i have described them briefly, but for details u can always check the documentation of weblogic):
1. Class loaders in weblogic: there are various levels of class loaders. at the top is the weblogic's class loader. below it are various EARs' class-loaders. and so on....
2. Packaging. You must ensure that in the same class loader, there are not two classes from 2 different jars.
hope that helps

How to run command line argument programe

Hi guys, I am doing pass command line argument programe in java but I don't know how to run this programe. Path for this programe in my my computer is C:\Users\Desktop\Mainjava\mycode\CommandProgjava*
{code/}
public class CommandProg
public static void main(String[] args)
System.out.println("d");
for (int i = 0; i < args.length; i++)
System.out.println(args);
{code/}
Where i need to go and what command i need to give so i can execute this programe(I am using window vista). I only know i have to give
this command some where CommandProg arg1 arg2 arg3 arg4. Output should be
Output:
arg1
arg2
arg3
arg4
Please help me, Thanks in advance.
Edited by: JayVirk on Dec 30, 2007 11:33 AM

Jay,
Your question isn't very clear, hence Joerg's well meaning but irrelevant advise.
Do you mean:
I've written a simple program in java which echos
it's command-line arguments to back to the console.
Here's my code:
package forums;
public class ArgsEchoer
public static void main(String[] args) {
for (String arg : args) {
System.out.println(arg);
But can't figure out how to compile and run the program.
I'm using winblows shista, and it's cr@p.
Please help me, Thanks in advance.So... where are you at? Have you installed the JDK (java development kit)? Which version? Is your path set? Is your classpath set?
Start here: http://java.sun.com/developer/onlineTraining/new2java/

How to run performance trace on a program

Similar Messages

Maybe you are looking for