How to run R3 program in BW using process chain

Hi,
I need to run a delta program of R3 in BW using process chain.
Can any one suggest me how to do that.
Its urgent.
regards
Bhanumathi

hi
Use the ABAP Program process type.
http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm
Regards
Dina

Similar Messages

  • How i run that delta infopackage in my process chain

    Hello Sir,
    i have a delta infopackage which sciduled in a process chain but it does not pick any delta i have to manualy run repair full infopackage dally and then delta comes in to picture my target is a dso so it does't have any problem.
    the datasourse is costamize
    delta pointer is cal day
    my question is how i run that delta infopackage in my process chain
    Thanks...

    Hi
    IS the process type "delta infopackage " is executing in the process chain or not? Plz once check in SM37 Tcode . and Why r u running the repair full request infopackage . If u miss any delta records then only u have to run the repair full request . If delta records are not extracted then better to manually extract the delta infopackage.
    Plz once check in SM37 Tcode whether the execute infopackage process step is running or not? or any error has occured in that PC.
    Thanx & Regards,
    RaviChandra

  • How to run a query as part of process chain on regular basis ?

    Friends,
    I'm in BW3.5
    I would like to execute a particular query as part of a process chain on regular basis. Could you please let me know how could this be done ??
    The intention is to cache the query memory each time the respective cube is loaded.
    Thanks
    Venkat

    Hi,
    You have to create a broadcast setting and mention the distribution type as export to cache.
    Set other attributes of the broadcast setting as required.
    Then in the process chain use the process type trigger event data change for broadcasting and mention the infoprovider name which has been loaded by the process chain.
    The broadcast setting is scheduled to execute on the data chage event of its base infoprovider.
    So when the process chain runs this event process, an event is fired which executes the broadcast setting, which will load the cache..
    Regards,
    Sunmit.

  • Delete Running Request in DSO Objects using Process Chain

    hello...currently i have one process chain that load the data from 3.5 datasource into the dso objects in BI 7.0. When i trigger the process chain and when there are no data from the source system, the dso will having the request in yellow color. And when comes to data activation in the dso, it will givin out error and stop the loading of data into the infocube using DTP process. I am just wondering is there any item that can be used in process chain to delete the yellow request in the DSO Object.
    thanks!

    Hi,
    I gues you can solve this problem in a much simpler manner, with out having to add any
    new process step or any thing.
    In your SAP system, the system wide setting to deal with a load if it fetched zero records
    is to consider it as incomplete i.e. mark it as YELLOW request.
    You just have to change this setting, and make the system to consider it as a complete
    request i.e GREEN, so that it gets activated with out fail.
    Select your data load -> Open Process Monitor /  Goto RSMO -> Menu -> Settings ->
    evaluation of reqest-> if no data is available from request, here you have to select successful
    Hope this resolves your concern....
    Cheers,
    Habeeb

  • How to run labview program in debugging mode in windows 95 version

    Respected all,
    I am facing probelm while running probe.vi.
    I received this command "connection to acquisition board was not found" when i run labview program.
    I  am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
    I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
    Thanking You
    Yours faithfully
    M.Vijay

    Respected Norbert,
    Thank you very much to for your help.
    Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
     I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
    Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
    I am asking you to know, If i using Labview and  Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
    But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
    I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
    The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
    I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
    I also removed AT-AO-10 software from device manager >> Data Acquisition system >>  AT-AO-10 just now.
    I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
    I am eagerly waiting for your help.
    Thanking You
    Yours faithfully
    M.vijay

  • How to run a program in background?

    Hi abapers,
    I want to run a program in background using sm36 and sm37.But i am not aware of input in that tansaction.So kindly tell me the steps ho run a program in background.
    Regards
    Ansuman

    Hi Ansuman Parhi,
    by useing T-codes
    First go to transaction SM36 to schedule the job.
    When you enter the "Start condition" for job, do as follow.
    Select processing by "Date/Time".
    Enter date as current date.
    Let us say you are scheduling this job today then give date 08/30/2007.
    Check "periodic job" checkbox.
    Hit "periodic value" button and select to run "Daily"
    Also have a look on below thread
    Re: How to run program in background?
    This is how to do it through code
    data: lv_job_name like tbtco-jobname,
    lv_job_nr like tbtco-jobcount,
    lv_job_released type c,
    lv_job_start_sofort type c,
    lv_print_parameters type pri_params.
    lv_job_name = 'Z_test'. " your background program name
    call function 'JOB_OPEN'
    exporting
    jobname = lv_job_name
    importing
    jobcount = lv_job_nr
    exceptions
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    others = 4.
    if syst-subrc = 0.
    *submit job with all the selection screen params...
    submit (lv_job_name)
    with applfile = applfile
    with p_lines = p_lines
    with rfc_dest = rfcdest
    with p_selmtd = lv_selmtd
    with px_shsim = px_shsim
    with px_sherr = px_sherr
    user syst-uname
    via job lv_job_name number lv_job_nr and return.
    if sy-subrc = 0.
    call function 'JOB_CLOSE'
    exporting
    jobcount = lv_job_nr
    jobname = lv_job_name
    strtimmed = 'X'
    importing
    job_was_released = lv_job_released
    exceptions
    cant_start_immediate = 1
    invalid_startdate = 2
    jobname_missing = 3
    job_close_failed = 4
    job_nosteps = 5
    job_notex = 6
    lock_failed = 7
    others = 8.
    if syst-subrc 0.
    message i162(00) with
    'An error occured while closing the background job.'.
    stop.
    endif.
    endif.
    endif.
    skip 1.
    write: / 'Background process', lv_job_name ,
    'called successfully' no-gap.
    write: / 'You can check the job in transaction SM37'.
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7

  • To run a program in BACKGROUND using SUBMIT

    I need to run a program in background using the SUBMIT option. Here i have to pass an internal table form one program to another which will be used to update sales orders using BDC.
    Questions
    1} Can we execute a program in background using SUBMIT?
    2} I am sending data to a MEMORY ID , if i run the program in background will the memory id work. As in do  memory IDs work in the background.
    Thanks in Advance

    refer  same thread.
    Re: Problem with SUBMIT in Background

  • How to run the program in back ground with out selection screen ?

    Hi,
    I want to run the program in back ground but don't have selection screen. How to run this program in back ground
    as program has no selection screen.
    Waiting for quick response.
    Best Regards,
    Padhy
    Moderator message: basic, please search for available information/documentation.
    Edited by: Thomas Zloch on Feb 21, 2011 12:43 PM

    Hi,
    Go to transaction SE38 --> Execute --> Background.
    If your program contains selection screen, you have to pass your input values as variants.

  • How to run java program from website?

    Hello
    I'd like to know how to run java program from my web page.
    I'd like to push some button in this web page so java program that would be on my server
    would pop-up. Can it be done automaticaly upon running this web site? (without any buttons - I just enter website and program pops up).
    Cheers

    I rather thought about RMI. But I could try servlets. So how it would look like?.
    I would make http request in browser (enter address) and program would show up in its window?. And I would not have to change anything in my program?. This program would run then on both boxes?. One remotely and one not?.
    But I would have to learn some basics, I've never worked with servlets. Could you suggest some good sites about it?. With ready examples so I could tweak them to my purpose.
    Message was edited by:
    macmacmac

  • How to run the oracle application cleint using static ip or domain please e

    How to run the oracle application cleint using static ip or domain please explain me.
    i am not able to run oracle forms in client machine how to run it please explain me
    Please give me detail regarding that
    any body please help me.
    my mail id::::: [email protected]

    You did not mention exactly which Forms version you are using so it will be difficult to offer specific help. However, you did mention Forms 9i. ALL "9i" releases were desupported long ago, so find software or documentation are becoming more difficult.
    Here is the Deployment Guide for Forms 10.1.2
    http://download.oracle.com/docs/cd/B19375_07/doc/frs/forms/B14032_03/toc.htm
    Here are some technical reference for Forms 9.0.x
    http://www.oracle.com/technology/products/forms/techlisting9i.html

  • How to Run scenario from the web using HTTP web page?

    Hi guys
    Please let me know How to Run scenario from the web using HTTP web page?
    Regards
    Janakiram

    Hi Janakiram,
    ODI provides web based UI for running the scenarios using Metadata Navigator (read only of ur ODI components) and Lighweight designer (u can edit the mapping here).
    Please explore how to install metadata navigator in ODI and have a look at ODI Setup document for more information.
    Thanks,
    Guru

  • How to run native program with Java program?

    Hello
    I've got following problem. I'd like to write file browser which would work for Linux and
    Windows. Most of this program would be independent of the system but running programs not. How to run Linux program from Java program (or applet) and how to do it in Windows?.
    Cheers

    Try this:
    Runtime rt = Runtime.getRuntime();
    Process proc = rt.exec("ls -l");
    InputStream stream = proc.getInputStream();
    InputStreamReader isr = new InputStreamReader(stream);
    BufferedReader br = new BufferedReader(isr);
    String line = null;
    while ( (line = br.readLine()) != null) .....
    "if the program you launch produces output or expects input, ensure that you process the input and output streams" (http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html)

  • How to run Struts program with the help of tomcat

    Hello Everybody
    This is Adesh.I am a newcomer of java and facing a problem with struts, so if any one know how to set the path of struts and how to run struts program, so plz inform me.
    THX in Advance.............................................

    struts-config.xml
    <struts-config>
    <action-mappings>
         <action path  = "/welcome"
                    type  = "Welcome"
                    scope="session">
                <forward name="success" path=".welcome"/>
                <forward name="failure" path=".base.error"/>
         </action>
    </action-mappings>
        <plug-in className="org.apache.struts.tiles.TilesPlugin">
            <set-property property="definitions-config" value="/WEB-INF/tiles-defs.xml"/>
            <set-property property="definitions-debug" value="1"/>
            <set-property property="definitions-parser-details" value="0"/>
            <set-property property="definitions-parser-validate" value="true"/>
        </plug-in>
    </struts-config>tiles-defs.xml
    <tiles-definitions>
         <definition name = ".base" path = "/include/template.jsp">
              <put name = "title" value = "${title}"/>
              <put name = "header" value = "/include/top.jsp"/>
              <put name = "body" value = "${body}"/>
              <put name = "footer" value = "/include/footer.jsp"/>
         </definition>
    </tiles-definitions>web.xml
    <servlet>
            <servlet-name>action</servlet-name>
            <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
            <init-param>
                <param-name>config</param-name>
                <param-value>/WEB-INF/struts-config.xml</param-value>
            </init-param>
    <init-param>
                <param-name>definitions-config</param-name>
                <param-value>/WEB-INF/tiles-defs.xml</param-value>
            </init-param>
            <load-on-startup>1</load-on-startup>
        </servlet>
    <servlet>
            <servlet-name>init</servlet-name>
            <servlet-class>Init</servlet-class>
            <load-on-startup>2</load-on-startup>
        </servlet>
        <servlet-mapping>
            <servlet-name>action</servlet-name>
            <url-pattern>*.do</url-pattern>
        </servlet-mapping>
      <jsp-config>
        <taglib>
            <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
            <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
        </taglib>
        <taglib>
            <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
            <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
        </taglib>
        <taglib>
            <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
            <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
        </taglib>
        <taglib>
            <taglib-uri>/WEB-INF/wall.tld</taglib-uri>
            <taglib-location>/WEB-INF/wall.tld</taglib-location>
        </taglib>
        <taglib>
            <taglib-uri>/WEB-INF/c.tld</taglib-uri>
            <taglib-location>/WEB-INF/c.tld</taglib-location>
        </taglib>
        <taglib>
            <taglib-uri>/WEB-INF/fn.tld</taglib-uri>
            <taglib-location>/WEB-INF/fn.tld</taglib-location>
        </taglib>
        <taglib>
            <taglib-uri>/WEB-INF/fmt.tld</taglib-uri>
            <taglib-location>/WEB-INF/fmt.tld</taglib-location>
        </taglib>
    </jsp-config>
        <resource-ref>
            <description>DB Connection</description>
            <res-ref-name>jdbc/SQLServerDB</res-ref-name>
            <res-type>javax.sql.DataSource</res-type>
            <res-auth>Container</res-auth>
        </resource-ref>
    </web-app>This should help....

  • How to run Java program as Daemon Server in linux

    How to run Java program as Daemon Server in linux
    i would like to run the java program on system start up in a redhat linux system
    can any one provide rc.status file

    http://wrapper.tanukisoftware.org/

  • How to Send an Email to Outlook using process type in RSPC?

    Hi,
    How to Send an Email to Outlook using process type in RSPC?
    We created lot of process variants, actually we want to send an mail to users if the DP Background job was succesfully finished.
    Actually i tried with create message its not happening...
    Plz let me know .. its urgent ...
    Regards,
    Satish

    Hello Satish,
    If you want to send a friendly message to your users, then you can do this by building an ABAP program that calls function module SO_NEW_DOCUMENT_SEND_API1 . You can then insert this ABAP program in your process chain (using the ABAP program process type) or as a second step in your background job. With this technique, you can send an email to SAP users, or to external users (e..g Outlook email addresses)
    Here's  a sample ABAP code:
      data: ls_docdata type SODOCCHGI1,
            lt_objcont type table of solisti1,
            lt_receivers type table of somlreci1,
            ls_objcont type solisti1,
            ls_receivers type somlreci1,
            ls_user type syuname.
    * Fill these variables with subject and msg lines that you need.
    data: MAIL_SUBJECT     TYPE STRING,
    MSG_LINE1     TYPE STRING,
    MSG_LINE2     TYPE STRING,
    MSG_LINE3     TYPE STRING,
    MSG_LINE4     TYPE STRING,
    MSG_LINE5     TYPE STRING.
      ls_docdata-obj_descr = mail_subject.
      ls_objcont-line = msg_line1.
      append ls_objcont to lt_objcont.
      ls_objcont-line = msg_line2.
      append ls_objcont to lt_objcont.
      ls_objcont-line = msg_line3.
      append ls_objcont to lt_objcont.
      ls_objcont-line = msg_line4.
      append ls_objcont to lt_objcont.
      ls_objcont-line = msg_line5.
      append ls_objcont to lt_objcont.
    * t_userlist contains the list of users to whom th email will be sent.
      loop at t_userlist into ls_user.
        ls_receivers-receiver = ls_user.
    "Change the type  here if email is for outlook users, See documentation
    " of function module in SE37
        ls_receivers-rec_type = 'B'.            
        ls_receivers-express = 'X'.
        append ls_receivers to lt_receivers.
      endloop.
      CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
        EXPORTING
          document_data                   = ls_docdata
        tables
         OBJECT_CONTENT                   = lt_objcont
         receivers                        = lt_receivers
       EXCEPTIONS
         TOO_MANY_RECEIVERS               = 1
         DOCUMENT_NOT_SENT                = 2
         DOCUMENT_TYPE_NOT_EXIST          = 3
         OPERATION_NO_AUTHORIZATION       = 4
         PARAMETER_ERROR                  = 5
         X_ERROR                          = 6
         ENQUEUE_ERROR                    = 7
         OTHERS                           = 8
    You can test out the function module first in SE37 (just put the name of the FM and click execute). Testing it in SE37 will help you get your parameters right.
    Hope this helps.

Maybe you are looking for