Delete Running Request in DSO Objects using Process Chain

hello...currently i have one process chain that load the data from 3.5 datasource into the dso objects in BI 7.0. When i trigger the process chain and when there are no data from the source system, the dso will having the request in yellow color. And when comes to data activation in the dso, it will givin out error and stop the loading of data into the infocube using DTP process. I am just wondering is there any item that can be used in process chain to delete the yellow request in the DSO Object.
thanks!

Hi,
I gues you can solve this problem in a much simpler manner, with out having to add any
new process step or any thing.
In your SAP system, the system wide setting to deal with a load if it fetched zero records
is to consider it as incomplete i.e. mark it as YELLOW request.
You just have to change this setting, and make the system to consider it as a complete
request i.e GREEN, so that it gets activated with out fail.
Select your data load -> Open Process Monitor /  Goto RSMO -> Menu -> Settings ->
evaluation of reqest-> if no data is available from request, here you have to select successful
Hope this resolves your concern....
Cheers,
Habeeb

Similar Messages

  • How to run R3 program in BW using process chain

    Hi,
    I need to run a delta program of R3 in BW using process chain.
    Can any one suggest me how to do that.
    Its urgent.
    regards
    Bhanumathi

    hi
    Use the ABAP Program process type.
    http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm
    Regards
    Dina

  • Selective deletion of Data in DSO in a process chain

    Dear all,
    Is there any standard functionality that allows to selectively delete the data from a DSO (the three tables to avoid delta inconsistencies) in a process chain? The unique option I could see in standard functionality is to delete the entire content.
    Any help will be much appreciated.
    Thanks&Regards
    Begonia

    Hi.
    There is standard FM for such purpose RSDRD_SEL_DELETION.
    You should write report (SE38) that using this FM and then run this report within process chain with variant.
    Please follow the [example|http://wiki.sdn.sap.com/wiki/display/BI/Schedulingselectivedeletioninprocesschain-%28infocube..%29].
    Regards.

  • "Delete Overlapping Requests from InfoCube" in a Process Chain

    Dear all,
    I encountered a problem when I building the process chain in BW 3.0.
    In a process chain, I schedule daily an InfoPackage to load data to an InfoCube and then delete the previously loaded data by the same InfoPacckage from the InfoCube.
    For example, I have 2 InfoPacakge, A and B, and schedule to load data to InfoCube C. In the process chain, I scheduled daily the following tasks in sequence:
    - Delete index in InfoCube C
    - Load data through InfoPackage A to InfoCube C
    - Delete duplicated request previously loaded through InfoPackage A in InfoCube C
    - Load data through InfoPackage B to InfoCube C
    - Delete duplicated request previously loaded through InfoPackage B in InfoCube C
    - Create index in InfoCube C
    However, when I activate the process chain, a warning message is prompted: No type "Delete Overlapping Requests from InfoCube" process allowed infront of process "Execute InfoPackage" variable ZPAK_4GMFI
    Would anyone tell me why such warning message is prompted?
    Many thanks!
    Best regards,
    Marcus

    Hi all,
    Re Ranjan:
    I previously config the process chain like that:
    (1)   Delete index in InfoCube C
    (2)   Load data through InfoPackage A to InfoCube C
    (3a) Delete duplicated request previously loaded through InfoPackage A in InfoCube C
    (3b) Load data through InfoPackage B to InfoCube C
    (4)   Delete duplicated request previously loaded through InfoPackage B in InfoCube C
    (5)   Create index in InfoCube C
    where (3a) and (3b) is executed simultaneously.
    However, (3b) often reports error. I guess it may be due to the parallel run of (3a) and (3b). So that's why I set the process chain to be executed in serial.
    Re Jacob:
    I found that the process chain can be run even a warning message is prompted when activating the process chain!.
    Thanks you all for your kind support!!
    Best regards,
    Marcus

  • Unable to delete the Requests in the data target---Process chain

    Hello Gurus!
                          Can anyone plz help me out knowing this issue...
      <b>Let me explain the whole scenario:</b>
    Like when monitoring the process chains,one of the process chainhas a  sequence of variants like:
    load info-package1>ODS1 activation>load infopackage2-->load infopackage3..
    due to some problems they scheduing it manually.all the infopackages loads data into one ODS1......suddenly info-package3 failed.
    so....when i looked into the datatarget ODS1->manage->requests.
    <b>i found that the info-pack1 requests status was RED.
    info-pack2 requests status was YELLOW.
    info-pack3 requests status was RED</b>.
    ALL THE THREE R FULL UPDATES ONLY.
    so suddenly one of our cologue  deleted the all the three requests by making ino-pack2 requests to red.
    when we r loading again the ino-pack1  again its failed.we deleted it onceagain(removing the requests from the ods),when we are trying to load ino-pack2 for some priority ,automatically the info-pack1 requests with red were seemed in the ODS.so how to solve this issue and also how to load these three ino-packs..
    i hope that all understand the scenario..plz suggest me how to work on it
    Thanks in advance!!!
    Dilip

    Hi,
    Your loads are running on back ground you have to kill this porcess in SM50 or SM51 check which are all jobs are running with your user name and ALEREMOTE if jobs are running with ALEREMOTE you can check wether it is your load or some body else in SM37 so kill your jobs in SM50 or in SM51 and make request into RED of your 3 loads, delete the requests from ODS and repeat the loads it will go with out any issues, as i under stood your question when your colegue deleted the request without killing the process he simply made it to red and delete its wrong he has to kill the process and then make it to red.
    Regards
    Sankar

  • Delete red request from dtp in a process chain

    Hi all,
    I continuously load Data from a DB-Connect DataSource directly in a InfoCube with a Process Chain.
    When a Request went red, the Process Chain should just start the next day again an will so do a full update.
    But I need to repair or delete the red requst in the DTP before I can use the DTP again. I don´t want to do this manualy.
    Has someone an idea how I can handle this. Like delete the red request before starting the DTP...?
    Thanks for ideas
    Tom

    Hi Thorben,
    Using table  RSBKREQUEST you can write a ABAP Code to check tstate value(its field in rsbkrequest table)  i.e. request status, delete the request entery from this table using required validation.
    0     New
    1     Executable
    2     Processed Successfully
    3     Processed with Errors
    4     Deleted
    5     Active
    6     Processed, with Warnings
    7     Further Processing Started
    8     Processed Further
    9     Deletion Started
    A     Further Processing Terminated
    These are the possible values that tstate can have .
    Please oblige if its helpful..
    Warm Regards,
    Rohit Garg

  • How to delete Master data using Process Chain

    I need to delete data in respective data targets such as Infocubes, DSO’s & Master data Infoobjects. It was fine with Infocubes & DSOs  using respective process type. But the issue is with Master data Infoobjects.
    Is there any process type by using which I can delete data in Master data Infoobjects using process chain?

    Murali,
    Master data object process type is not there because in BW, master data is conformed or is shared by other infoproviders. Due to this dependency, master data loading is a bit more complex. You need to drop all the data from all the infproviders which are using the master data you want to delete.
    -Saket

  • Need help in deleting the requests from DSO

    Hi All,
    I want to delete the data load requests present in the dso, I cant do that from the manage tab as it is throwing error because of some dump been loaded into it.
    Please tell me the tables names which stores these data load requests of the dso's so that I can delete those requests  in the backend.
    If is there any way to delete these requests or complete data, please let me know. I cant do these operations from the mange tab/delet data tab of dso as it is throwing the error.
    Thanks,
    vinay.

    Hi,
    You can delete the Requests form DSO by useing RSICCONT.
    Follow bellow steps:
    1. Goto SE16.
    2. Give the RSICCONT and Click on Technical Contents.
    3. Give the DSO name--> Click on Execuit
    it will dispaly the number of requests which it exists.
    4. Select your request>Select 'Table Entry' Menu> Select 'Delete'
    Regards,
    Suman.

  • How to delete requests in PSA using Process chains

    Hi All,
    Can anyone explain me how to delete all the requests in PSA using Process chains.
    This is what I did...
    1. use Process type 'Deletion of Requests from PSA'
    2. Settings:
    Object Type - PSA table
    Object Name - <Datasource name>          
    Older than - 0 (Zero) days
    These settings doesn't work. Can you please let me know exact settings to use for deleting all the requests in PSA of a datasource.

    Hello Praveen,
    That's what I thought too. But if I use '1' one day, what if I need to run it twice same day? So this doen't work for my requirement.
    Any other suggestions?
    Thanks.

  • Problem in deleting a request from Dso

    Hi Experts,
    I have loaded the request into DSO, after activation, i have changed the QM status to red and try to delete it from the manage screen. But it is not getting deleted from DSO.
    I have used following tables :
    RSREQDONE
    RSICCONNT
    RSODSACTREQ
    For deletion purpose, but i'm not provided with authorization ..
    And also i have used FM to delete the request from DSO , but it also failed ..
    Can you please help me out in this regard..
    Thanks
    PT

    Hi,
          Please check if your DSO is locked by any other process.  You can check the lock status from SM12. If your DSO is locked by some other process, you will have to wait till that process finishes or kill the process if it is not required so that your DSO will be unlocked. Once your DSO is unlocked you can retry activation. If this doesn't work, please check if you have the authorization to delete data. after trying to delete the DSO you can run the transaction SU53 to see if there is any authorization failure.
    Hope this helps you.
    Thanks,
    Nithin Reddy.

  • Loading from flat file to dso using process chains

    hi,
    i am using BI7.0
    i am new to  process chains
    can anyone  explain how to load data from flat file to dso using process chains(i have created all the objects created) preffered if explained with an example

    You can find a lot info if you can searh SDN.
    Metachain
    Steps for Metachain :
    1. Start ( In this variant set ur schedule times for this metachain )
    2.Local Process Chain 1 ( Say its a master data process chain - Get into the start variant of this chain ( Sub chain - like any other chain ) and check the second radio button " Start using metachain or API " )
    3.Local Process Chain 2 ( Say its a transaction data process chain do the same as in step 2 )
    Steps for Process Chains in BI 7.0 for a Cube.
    1. Start
    2. Execute Infopackage
    3. Delete Indexes for Cube
    4.Execute DTP
    5. Create Indexes for Cube
    For DSO
    1. Start
    2. Execute Infopackage
    3. Execute DTP
    5. Activate DSO
    For an IO
    1. Start
    2.Execute infopackage
    3.Execute DTP
    4.Attribute Change Run
    Data to Cube thru a DSO
    1. Start
    2. Execute Infopackage ( loads till psa )
    3.Execute DTP ( to load DSO frm PSA )
    4.Activate DSO
    5.Delete Indexes for Cube
    6.Execute DTP ( to load Cube frm DSO )
    7.Create Indexes for Cube
    3.X
    Master loading ( Attr, Text, Hierarchies )
    Steps :
    1.Start
    2. Execute Infopackage ( say if you are loading 2 IO's just have them all parallel )
    3.You might want to load in seq - Attributes - Texts - Hierarchies
    4.And ( Connecting all Infopackages )
    5.Attribute Change Run ( add all relevant IO's ).
    Start
    Infopackge1A(Attr)|Infopackge2A(Attr)
    Infopackge1B(Txts)|Infopackge2B(Txts)
    /_____________________|
    Infopackge1C(Txts)______|
    \_____________________|
    ___________________|
    __\___________________|
    ___\__________________|
    ______ And Processer_ ( Connect Infopackge1C & Infopackge2B )
    __________|__________
    Attribute Change Run ( Add Infobject 1 & Infoobject 2 to this variant )
    1. Start
    2. Delete Indexes for Cube
    3. Execute Infopackage
    4.Create Indexes for Cube
    For DSO
    1. Start
    2. Execute Infopackage
    3. Activate DSO
    For an IO
    1.Start
    2.Execute infopackage
    3.Attribute Change Run
    Data to Cube thru a DSO
    1. Start
    2. Execute Infopackage
    3.Activate DSO
    4.Delete Indexes for Cube
    5.Execute Infopackage
    6.Create Indexes for Cube
    Some Links
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c

  • Deletion of changelog data using process chain

    Hi All,
             I have a requirement where i have to delete the changelog data for particular set of data using process chain.we have an option of deleting the entire data from changelog but how to delete only a particular set of data?????

    If you are on BI 7 than,
    Choose "Deletion of Requests from the Change Log" from process category Further BI Processes by double-clicking.
    Create a new process variant and in the variant maintenance screen select Type of Object as Change Log Table
    Under Name of object select DSO name
    Specify the requests that need to be deleted by determining the days or dates. You also have the option to specify whether you only want to delete successfully updated requests, and/or only incorrect requests that are no longer updated in an InfoProvider.

  • Selectively deleting load from ODS using Process Chain

    Hi All,
    I have a requirement in which I have to delete the last load of the current month if any and leave the load of the last month untouched which has to be done using process chain.
    I will try to elaborate the condition required like say we have a data for June in the ODS already (date 10) and when the load for July will come it will not touch the June data but on 2 July the load of first July will be deleted without touching the load from June 10. (The PC will run for the first 10 days of the month).
    How can this be implemented, There seems to be some FM for this but are there any other method by which the same can be implemented without much use of ABAP.
    Any relevant suggestion would be awarded points
    Regards,
    Samved

    Hi Bhanu,
    Thanks for the reply.
    I tried to generate the program but that can be used for selective deletion from the ODS i think soo.
    But my requirement is basically to delete the complete request from the ODS and not any selective deletion and at the same time I cannot use the complete deletion option as that will delete the request from the last month also.
    Are there any optioin at the level of Info package which can be used for these type of deletion.
    Regards,
    Samved

  • Delete Initialization using Process Chain

    Hi Experts,
    How to delete initialization using process chain? Additional question, why does our DTP couldn't get any data from PSA? We just transfer our DTP to other process chain and left its associated infopackage from the original process chain but when we check our extraction, our DTP always gets zero (0) records. What do we need to put in our DTP settings? and infopackage and DTP should always be in the same process chain??
    Thanks,
    nips

    Hi UserPV,
    Thanks for your inputs!
    Anyway, our InfoPackage in the other Process chain executed succesfully and has an extracted data. Now, our DTP can't get any data from the PSA where the extracted data of InfoPackage resides first. Is there any other way around to separate DTP and its associated infopackage in different process chains? Or those objects should be in the same process chain?
    Another questions, how can we delete an initialization using a process chain? and is there a function module that can we use to remove the initialization request so that we could re-initialize a process?
    Thanks,
    nips

  • Delete Master Data using Process Chain?

    Hi Friends,
    How do I delete Master Data using Process Chain?
    Thanks,
    Pradeep

    Hi Bhanu,
    I am not sure why we would want to delete MD. But that is the task given to me. I actually know it is not possible. But is there a way to delete MD using chains?
    Thanks,
    Pradeep

Maybe you are looking for