How to run test.rdf (Reports10g)

I'm posting this message again as I haven't got any reply. Is there anyone out there who successfully tested the reports? Please let me know any solutions you have?
i finally fixed forms and run the test.fmx successfully. I checked the port number in the eterprise manager console. I was using 7777 instead of 7778 and that was the reason it didn't work.
But now I'm trying to test report server and it spits out lots of error.
1. when I run the runrepIAS.html I get the error "The file /reports/rwservlet?destype=file&desformat=PDF&server=rep_mersales&report=test.rdf
cannot be found. Please check the location and try again
2. When i try to start the report server by giving rwserver.sh server=rep_mersales batch=yes, I get server starting up and after 2 mins it shuts down itself.
3. when goto the website http://mersales:7778/reports/rwservlet/=getserverinfo? it says REP-50002: Server is shutting down.
4. If i got enterprise manager console and try to restart the process it says
An error occurred while restarting "Reports Server: rep_mersales".
An error occurred while talking to OPMN. Could not find entity for "rep_mersales".
For more information, look at the logs using the related link below.
Related Links Error Logs
I cannot win so far. Can anybody know how we can test the report?????

Hi,
It seems your problem is resolved now. If you have any issue in future with Oracle Reports, you could post your Q here - the following forum is exclusively for Reports:
Reports
Navneet.

Similar Messages

How to run Test Configuration in XI

Dear all experts,
I am new in SAP Netweaver and I am trying to get certify my products. Thus, I have some questions and appreciate you can help to clear my doubts below.
1. I have finished configuration in XI, but when I try to run Test Configuration from the Tools, it show error in Receiver Determination stage. Can anyone help to explain how to perform this test? and what should I put in Payload?
The error message:
Receiver Determination
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://pwdf0880.dmzwdf.sap.corp:50080/sap/xi/simulation?sap-client= User: XIDIRUSER
2. My Scenario is a Web Screen (asp.net) calling and passsing a parameter to XI Server, then XI will execute a BAPI to return some data. Can any expert out there give some sample codes in asp.net that send HTTP Request to XI Server?
3. What is the use of WSDL in XML format?
Thanks in advance.
Best regards.
Message was edited by: Adam Lee

Hello Adam,
You sent this other question (below) to my email box. I will answer it here so that other people will benefit from it. To unlock an object which someone has locked, goto homepage of SAP Exchange Infrastructure --> Click on the link at the upper right hand side called "Administration" --> Enter the User name and password (you might not have authorization) to display page --> Select "Lock overview" (left panel) and remove the lock of your selected user.
I've gone ahead to remove it for you.
Also, I did a check on your IS in the Integration Directory called, IS_DISPLAYPO_SUPPLIER, and there was no error. Did you fix it already? It looks like you have everything correctly defined in my first pass. Please let me know if you are still stuck.
Have you also asked your consultant to look into this?
Regards,
John Ta
From: Adam Lee [mailto:[email protected]]
Sent: Monday, Oct 09, 2006 12:19 AM
Subject: RE: Category "SAP NetWeaver - Exchange Infrastructure " has been updated by Adam Lee
Dear John Ta,
Thank you for your kindness and willing to help.
I have sent out contract for the certification. Tuhin is the assigned
consultant to us.
By the way, I have one more question here hoping you able to help me. I
would like to delete an object in XI, but it show an error "Object Data Type
DT_PO_RESP | http://ep-net.com/xi/eProcurement/scm/40 currently being edited
by user EPASIA"
It seems that this object is being locked as I do not have any screen
editing this object. Appreciate if you can guide me how to unlock this
object and delete it?
Thank you.
Best regards,
Adam Lee.

Running test.rdf in oracle 10g and ibm aix 5L

Hi,
I am trying to run a demo test.rdf from the browser. This is in Oracle 10g and IBM AIX 5L.The report server is in-process server.
The url is
http://ipaddr:7778/reports/rwservlet?server=rep_igtewfux01&report=test.rdf&userid=dbuserid/dbpwd@asdb&desformat=PDF&destype=cache
Engine rwEng-0 crashes all the time. Below is a part of the exception . Please help.
[2005/8/26 6:19:14:20] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 98
[2005/8/26 6:20:9:64] Exception 50125 (org.omg.CORBA.TRANSIENT: vmcid: 0x0 minor code: 0 completed: No
     at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java(Compiled Code))
     at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java(Compiled Code))
     at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java(Compiled Code))
     at oracle.reports.engine._EngineClassStub.run(_EngineClassStub.java:147)
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:784)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1557)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:896)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1166)
     at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:287)
     at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
     at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1627)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1481)
     at oracle.reports.rwclient.RWClient.doGet(RWClient.java:349)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java(Compiled Code))
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code))
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:568)
): Internal error org.omg.CORBA.TRANSIENT: vmcid: 0x0 minor code: 0 completed: No
[2005/8/26 6:20:9:64] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwEng-0
[2005/8/26 6:20:9:66] Exception 50125 (org.omg.CORBA.OBJECT_NOT_EXIST: vmcid: 0x0 minor code: 0 completed: No
     at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java(Compiled Code))
     at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java(Inlined Compiled Code))
     at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java(Compiled Code))
     at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java(Compiled Code))
     at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java(Compiled Code))
     at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java(Compiled Code))
     at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:341)
     at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1216)
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:826)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1557)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:896)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1166)
     at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:287)
     at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
     at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1627)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1481)
     at oracle.reports.rwclient.RWClient.doGet(RWClient.java:349)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java(Compiled Code))
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code))
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:568)
): Internal error org.omg.CORBA.OBJECT_NOT_EXIST: vmcid: 0x0 minor code: 0 completed: No
[2005/8/26 6:20:9:66] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Shutdown
[2005/8/26 6:20:9:66] Info 56047 (EngineManager:remove): Reports Server shut down engine rwEng-0
[2005/8/26 6:20:9:66] State 56016 (JobManager:updateJobStatus): Job 98 status is: Terminated with error:
REP-56048: Engine rwEng-0 crashed, job Id: 98
[2005/8/26 6:20:9:66] Debug 50103 (JobManager:notifyWaitingJobs): Master job 98 notify its duplicated jobs.
[2005/8/26 6:20:9:66] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 98
[2005/8/26 6:20:9:67] Exception 56048 (): Engine rwEng-0 crashed, job Id: 98
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=56048,
java.lang.String errorString="Engine rwEng-0 crashed, job Id: 98",
java.lang.String moduleName="REP"
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:861)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1557)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:896)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1166)
     at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:287)
     at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
     at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1627)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1481)
     at oracle.reports.rwclient.RWClient.doGet(RWClient.java:349)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java(Compiled Code))
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code))
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:568)

mmmh. Did you compared the select count(*) from your_table; in the two cases.
If the result is not good and nobody has deleted rows between migration and your test, you migration need to be replayed.
Which migration did you select, Transportable database or exp/imp...?
Edited by: Dba Z on 16 août 2009 08:56

How to "Run Test UUTs" from ParallelSeq?

Hello,
i´m starting a parallel-sequence in Seq-file load in the model when starting TestStand. How can i execute a "Run Test UUTs (F5)" from wthis parallelsequence to run the currrently loaded sequence?
Thx
Regards

Hello,
I don't understand your problem. Could you explain it a bit more detailed?
Could you post your sequence file?
Thanks and regards,
Wolfgang Z

How to run test cases in a jar file using junit?

Hi,
I want to run test cases in a jar file using junit and the jar file is not in the class path. I wrote the following code, but it does not work.
import java.net.URL;
import java.net.URLClassLoader;
import junit.framework.TestResult;
import junit.textui.TestRunner;
public class MyTestRunner {
     public static void main(String[] args) throws Exception{
          URL url = new URL("file:///d:/case.jar");
          URLClassLoader loader = new URLClassLoader(new URL[]{url});
          loader.loadClass("TestCase1");
          TestRunner runner = new TestRunner();
          TestResult result = runner.start(new String[]{"TestCase1"});
          System.out.println(result.toString());
}Any ideas?
Thanks a lot.

Wouldn't it just be easier to put it on the classpath? You're trying to, anyway, with a URLClassLoader, albeit in an entirely unnecessarily complicated way

How to run tests in Firefox when running script using runScript.bat

I am trying to run OATS script from commandline without opening Openscript IDE(eclipse). I use the following command to execute my script:
runScript "<scriptpath>/<scriptName>.jwg"The script starts to execute and launches IE. I wanted to run my test on Firefox but it always launches IE even if Firefox is my default browser.
If I run my script from Openscript IDE it honours the Browser settings in View > OpenScript preferences... OpenScript > General > Browsers. When running thorugh cmd line, these settings are not taken into account as Eclipse preferences settings are applicable only for the workspace selected for the IDE.
Any thought on how to set these preferences when running scripts using runScript.bat file?
Thanks,
Manish Khatre

Hello
You need to pass the value/parameters (preferences) to the command line as documented in the OpenScriptUserGuide.pdf.
Something like
-browser.type type
Specify the browser type to use for script playback
where type is one of the following (use exact case
and no spaces):
■ InternetExplorer
■ Firefox
The default is InternetExplorer
JB

How to run/test application using network streams

Hello,
I'm confused on what steps to follow to test an application using the network streams feature. After reading a lot and going through other discussions I found 2 simple VIs on the last post here http://forums.ni.com/t5/LabVIEW/Network-streams-problem-with-cRIO-9022/td-p/1401576 (I attached the VIs, which I modified just a bit) which I believe have been tested before and work so I was trying to do the same in my desktop and it does not work. I get the same scenario when I was trying to test the code I wrote: no bugs, both VIs run but nothing happens.
According to the link above this is what is supposed to happen: "a PC hosts a GUI (see mainGUI.VI) that sends an array of doubles to the cRIO via one stream and reads a double value back via another. The cRIO, via the scan interface, reads the array via the first stream and writes an analog value to the host via the second (see mainRT.VI). "
The current set up is:
1. Add both VIs to the blank project with the target device cRIO (see attached screenshot)
2. Deploy mainRT.vi on the cRIO
3. Run both at the same time
Am I missing something?
Also, I have been reading that there are two ways of testing this. One running both VIs on the PC and the other actually using the targeted device, in this case cRIO. Is that correct?
Please help!
Thank you
Attachments:
project explorer.jpg ‏36 KB
mainRT.vi ‏62 KB
mainGUI.vi ‏20 KB

Connections have TimeOuts, so you have a little "wiggle room" in deciding which to load first.
In my situation, one side is a Remote Real Time system ("Remote"), which has the behavior that when it starts up, it runs the code that I want, which includes establishing the Remote side of the Network Stream. I make all (four) streams use the Remote as the site whose URL (or IP) I need to know. I set them up so that if they time out (I think I may use 15 seconds), they simply close the connections and try again, exiting when all four connections are established, and going on to run the rest of the Remote code.
On the Host, the expectation is that the code is already running on the Remote. Accordingly, on the Host side, the Initialization sequence establishes the four connections, all using the IP (URL) of the Remote. I also use a 15-second timeout, but run it inside a second loop to allow three tries before I give up (and generate an Error Exit). Otherwise, if all the connections get made, I've got my Network Streams connected and can continue.
In this scheme, both the Host and Remote code are in the same Project. What I typically do is to Build the Remote code, deploy it, and set it to run as the Startup. If you are not dealing with a Real Time System, you might not have that option. But you should deploy your Remote code, and start both programs within each other's respective TimeOut windows. Since in my scheme the Remote Window is infinite, I (automatically) start it first, then start the Host. I haven't timed it, but I'd guestimate that the connections are established in at most a few tenths of a second.
Bob Schor

How to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller

we are using VS 2013, I need to run multiple Coded UI Ordered Tests in parallel on different agents.
My requirement :
Example: I have 40 Coded UI Test scripts in single solution/project. i want to run in different OS environments(example 5 OS ). I have created 5 Ordered tests with the same 40 test cases.
I have one Controller machine and 5 test agent machines. Now I want my tests to be distributed in a way that every agent gets 1 Ordered test to execute.
Machine_C = Controller (Controls Machine_1,2,3,4,5)
Machine_1 = Test Agent 1 (Should execute Ordered Test 1 (ex: OS - WIN 7) )
Machine_2 = Test Agent 2 (Should execute Ordered Test 2 (ex:
OS - WIN 8) )
Machine_3 = Test Agent 3 (Should execute Ordered Test 3
(ex: OS - WIN 2008 server) )
Machine_4 = Test Agent 4 (Should execute Ordered Test 4 (ex:
OS - WIN 2012 server) )
Machine_5 = Test Agent 5 (Should execute Ordered Test 5 (ex:
OS - WIN 2003 server) )
I have changed the “MinimumTestsPerAgent” app setting value
as '1' in controller’s configuration file (QTController.exe.config).
When I run the Ordered tests from the test explorer all Test agent running with each Ordered test and showing the status as running. but with in the 5 Test Agents only 2 Agents executing the test cases remaining all 3 agents not executing the test cases but
status showing as 'running' still for long time (exp: More then 3 hr) after that all so its not responding.
I need to know how I can configure my controller or how I can tell it to execute these tests in parallel on different test agents. This will help me reducing the script execution time.
I am not sure what steps I am missing.
It will be of great help if someone can guide me how this can be achieved.
-- > One more thing Can I Run one Coded UI Ordered Test on One Specific Test Agent?
ex: Need to run ordered Test 1 in Win 7 OS (Test Agent 1) only.
Thanks in Advance.

Hi Divakar,
Thank you for posting in MSDN forum.
As far as I know, we cannot specify coded UI ordered test run on specific test agent. And it is mainly that test controller determine which coded UI ordered test assign to which test agent.
Generally, I know that if we want to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller.
We will need to change the MinimumTestsPerAgent property to 1 in the test controller configuration file (QTControllerConfig.exe.config) as you said.
And then we will need to change the bucketSize number of tests/number of machines in the test settings.
For more information about how to set this bucketSize value, please refer the following blog.
http://blogs.msdn.com/b/aseemb/archive/2010/08/11/how-to-run-automated-tests-on-different-machines-in-parallel.aspx
You can refer this Jack's suggestion to run your coded UI ordered test in lab Environment or load test.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/661e73da-5a08-4c9b-8e5a-fc08c5962783/run-different-codedui-tests-simultaneously-on-different-test-agents-from-a-single-test-controller?forum=vstest
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to run a process PSPPYRUN or PSPPYBLD in PeopleSoft Test Framework ?

How to run a process PSPPYRUN or PSPPYBLD in PeopleSoft Test Framework ?
Please advise on the below scripts ,
     1          True          Browser     Start_Login
     2          True          Browser     Set_URL     PORTAL
     3          True          Link     Click     id=fldra_HC_NORTH_AMERICAN_PAYROLL
     4          True          Link     Click     id=fldra_HC_PROCESS_PAYROLL
     5          True          Link     Click     id=fldra_HC_CREATE_PAYSHEETS
     6          True          Link     Click     innerText=Create Paysheets
     7          True          Browser     FrameSet     TargetContent
     8          False          Page     Prompt     MANAGE_PAYROLL_PROCESS_US.RUNCTL_PAYSHEET.USA     add update
     9          True          Text     Set_Value     Name=PRCSRUNCNTL_RUN_CNTL_ID     AA
     10          False          Page     PromptOk
     14          True          Button     Click     Name=#ICSearch     Search
     11          True          Text     Set_Value     Name=PAYSHEET_RUNCTL_RUN_ID     K01FIN
     12          True          Page     Save
     13          False          Process     Run     prcname=psppybld;prctype=COBOL SQL;wait=True
     18          False          Process     Run     prcname=psppybld
     16          True          Process     Run     wait=True;expected=Success;
     15          True          Button     Click     Name=#ICSave

Build M33.106 is not available in service market place yet.
SAP informed that customer can not find information on the next build release date from Product Availability Matrix (PAM) or anywhere from SAP site.
Is there a way to get his information from Redwood site? Like when is the expected date for next release of the build?
Thanks
Nanda

How to run "WCF Workflow Service Application" (C# project) using "WCF Test Client" in VS 2013 ?

I have created a WCF Workflow Service Application of C# project.
How to run the project using WCF Test Client directly from VS 2013 by doing F5 ?
Iam using VS 2013 (.NET 4.5.1). It throws an exception to compile c# expressions.
Can we set any settings in web.config file ?
Please provide the solution.

Bhanu Prakash T,
It surprises me that building a simple WCF Workflow Service Application project in VS 2013 is giving you this problem. That project template should result in a file with an extension of ".xamlx" being generated. With .Net 4.5 and C#, that XAMLX
file will contain CSharp* activities for the expressions that you specified in the workflow definition. By default, those expressions will be compiled when you use "F5" to execute the workflow.
Or are you self-hosting the WorkflowServiceHost and loading the XAMLX file yourself using ActivityXamlServices.Load and then creating and managing the WorkflowServiceHost object instance yourself? You must can do the compilation yourself by following these
examples -
https://connect.microsoft.com/VisualStudio/feedback/details/741537/cannot-self-host-a-workflow-service-using-c-expressions or http://wf.codeplex.com/discussions/444990.
Jim

How to run a particular test from a set of CodedUI tests?

Hi,
I have designed custom framework from which we can decide which test case needs to be run or not. When I mark a test case as Yes (which means this testcase needs to be execute), how can i execute only those test case alone from Visual Studio?
Here, I have created the test scripts for all the above test cases in a single CodedUI test file and i need to execute the TC_0003 as i marked the Run as Yes only for TC_003 in the framework. Can you please help me to do the same?
Thanks in Advance
Selvaraj C
Selvaraj

Hi Selvaraj,
>> I have designed custom framework from which we can decide which test case needs to be run or not. When I mark a test case as Yes (which means this testcase needs to be execute), how can i execute only those test case alone from Visual Studio?
Do you mean you want to execute the special test? As far as I know, Ruby provides a framework in its standard library for setting up, organizing, and running test called Test::Unit. Test::Unit provides the function that running single tests. The link below
shows the details:
# Ruby Programming/Unit testing
http://en.wikibooks.org/wiki/Ruby_Programming/Unit_testing
I am not sure what do you mean by “custom framework”, do you want to design custom framework? In my option, it seems to be much complex. The steps below might be useful to you:
1. Store the tests in a csv file, and query the test which need to execute from the csv file, for this, you could turn to the link:
https://social.msdn.microsoft.com/Forums/en-US/9664862a-4302-4754-a915-2beceff364d5/how-to-stop-sequential-execution-of-data-driven-method-in-coded-ui
2. Get the test name, and execute the test from the command-line. The link below shows the details about the command-line:
# MSTest.exe Command-Line Options
https://msdn.microsoft.com/en-us/library/ms182489(VS.100).aspx
3. Write a script to run the command-line
If I misunderstood you, please feel free to let me know.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

How can I test the running time of a method?

c.What is the running time of your method smallest, as a function of n, the number of elements in the list? Use big-Oh notation.
I quoated from a java problem..
Anyone can tell me how I can test the running time? Thanks ! :D

it depends on what is in the method. For example a for loop executed n times would have a O(n). A double for loop (each loopp run n times) will have O(n^2). Do this: determine how many times each loop in the method is run. This is the first term in your runtime equation. Do this for all other loops in the method and add them all together. Most other statements that are not iterative should have a constant runtime so O(1). For conditional statements, the runtime depends on the most time consuming portion of the statement. Once all these are added together, take the O(equation) which should just leave the biggest term. i.e. O(5n^2+3n+8) = O(n^2). Hope this helps.
note: this does not apply to recursive methods

How to run the Hardware test on a Mac mini 2015 ?

how to run the Hardware test on a Mac mini 2015 ?

Welcome to Apple Support Communities
New Macs come with Apple Diagnostics instead of Apple Hardware Test, but their purpose is the same: check that your Mac's hardware is working properly. See -> https://support.apple.com/kb/PH18765?locale=en_US
To run it, you only have to hold down the D key while your Mac is starting up, and follow the steps.

[svn:bz-trunk] 18814: Add manual test for BLZ-594 with instructions on how to run the test.

Revision: 18814
Revision: 18814
Author:   [email protected]
Date:     2010-11-24 09:31:56 -0800 (Wed, 24 Nov 2010)
Log Message:
Add manual test for BLZ-594 with instructions on how to run the test.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-594
Modified Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/remoting-config.mods.xml
Added Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/RpcTest.java
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/BLZ-594.mxml
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/readme.txt

You do have a very complex looking site and may need several tables in mysql to handle all that data. If you knew to phpmysql I would suggest taking a look at this tutorial it will help get you started in understanding how to $_GET info from a database and also how to $_POST data to a database. I am no expert just learning myself and I found this very helpful. This is the link http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
There are also many tutorials on Youtube to help build a CMS Content Management Site I would suggest the following: -
http://www.youtube.com/user/phpacademy
http://www.youtube.com/user/betterphp
http://www.youtube.com/user/flashbuilding
And many more on my channel here
http://www.youtube.com/user/Whisperingonthewind
CMS's are easier to maintain, add edit and delete content.
I have also recently bought a Book by David Powers Training from the Source very helpful.
Anyway hope you get it sorted.

How to run multiple Test Script versions at once

HI
How to Run different versions of Test Scripts ( TCD record & SAP GUI) continiously.
Thankyou

>
d s wrote:
> HI
> How to Run different versions of Test Scripts ( TCD record & SAP GUI) continiously.
>
> Thankyou
Hi DS,
If I understand your question correctly,you want to execute different version of TCD and SAPGUI continously,then please find the steps below:
1)Create a new script.
2)Call the individual scripts created in TCD and SAPGUI in the new script using REF command in the pattern you want to execute.
3)eCATT will automatically choose the relevant version automatically suitable for the system.
4)Maintain the input and output paramters in the main script.
5)Paramterize the input and output values.
6)Once the script is without errors,you can execute the scripts and they run continously.
Hope this answers your query.
Regards,
SSN.

How to run test.rdf (Reports10g)

Similar Messages

Maybe you are looking for