How to run two icalenders on the same computer?

How can i run two separate icalenders on the same computer? I have my own icalender with work, home, etc, and it's totally full. I am now running an artists collective and will publish the collectives icalender on the web. I don't, however, want to mix what will be a pretty busy calender with my own already too full one. Is it possible to run two totally separate calenders on the same computer?
macbook Mac OS X (10.4.8)

trsv,
Welcome to Apple Discussions.
Create two Groups...
Calendar 1:
Work
Home
etc
Calendar 2:
Collective Calendar
You can then switch which groups you wish to display by activating/deactivating the check mark in the Calendar source window.
That will also allow you to selectively publish the Collective Calendar.
;~)

Similar Messages

How to run two query in the same preparedStatement

Hi all,
Please tell me how to run two queries in the same preparedStatement object ?
In my module I have to run two queries and I don't want to make two methods for running two different queries.
I just want to call this method for both of my queries.
methodName(long param)
Connection conn=null;
PreparedStatement pstmt=null;
//////////////// some coding
Please Help !
Thanks in advance
amitindia

    public void foo()
        Connection connection = null;
        PreparedStatement stmt = null;
        try {
            connection = ...get from pool...;
            stmt = connection.prepareStatement("...");
            ...fetch results...;
            stmt.close();
            stmt = null; // So the finally statement works if there is an exception
            stmt = connection.prepareStatement("...");
            ...fetch results...;
        } finally {
            if (stmt != null) ..close it...;
            if (connection != null) ..return it to pool...;
    }

How to use two ipods on the same computer

I have one laptop with four user accounts. Until now we've had only one ipod that synchs with the iTunes library in Dad's account. Now daughter has an iPod, but want to use access the same music and playlists as Dad uses, at least for now. Do we synch the Daughter's ipod in Dad's account, just like we did with the first iPod?

You would need to sync in Dad's account to access Dad's iTunes Library. However, if she has loaded her iPod with the music she wants from Dad's iTunes Library, then she can continue to play the music even if she has her own Apple ID and separate user account on the same computer. She just will not be able to add new music from Dad's iTunes Library unless she uses Dad's Apple ID.
iDevices are single-user devices, so for daughter to have her own Apple ID and iTunes Library, then she has to have her own user account on the computer.
If it's more convenient to have on iTunes Library shared by all, then make no changes. iTunes knows that every connected device is different by the name you give the device, like "Daughters iPod" as an example.

How to execute two nwds in the same computer ?

Hi Guys,
My question is in the topic. I know the same topic already exist, but I can find out it with the search engine of SDN.
Thanks to give me some link or the answer.
Regards,

berthe,
I run 3 NW IDE on same machine. Just select different installation locations and separate workspaces & DTR roots.
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

Run two VIs at the same time

Hello!
I want to know how i can run two VIs at the same time.
I mean that i want to run a second VI ( N.2) while another VI (N.1) is in
execution without suspend it (N.1)
If anyone has suggestions, please help me!
Thank you very much.
roby.

If you say "run a vi", I assume that you have the VI open in LabVIEW, then press the run button. (Some of the earlier answers taks about programmatically calling VIs, which I don't think is the focus of your question)
You can run as many VIs as you want at the same time. Simply press the run button of the second VI and they will both run.
Of course you should ensure that they don't use the same resources (e.g. DAQ device, or listen on the same TCP port, etc.) In these cases, the second VI might fail. (Also if the second VI is a subVI of the first VI, you won't be able to run it seperately, because it will be already running.)
LabVIEW Champion . Do more with less code and in less time .

How do I share one itunes account between two users on the same computer

How do I share one itunes account between two users on the same computer without taking up twice as much space on my hard drive?

You would need to move the itunes folder to a location that both users have permissions to access such as the Shared folder or any folder on the root level of the macintosh HD.
You can find instructions here http://support.apple.com/kb/HT1203 This method allows you to share the content without sharing the same library.

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!

Can I run two PIDs from the same vi?

Hi
I want to control speed of the rotating shaft and force applied by the pneumatic cylinder using two different PIDs from the same program.
I managed to get two PIDs to work separatly using PID control loop VI`s supplied with labview 6.1 (I got Kc, I and D right, so there is no overshoot). When I try to run both PIDs within my vi they don`t work. I again tried various gains and managed to get one PID to work but not the other. Then through trial and error I managed to get a second PID to work but I had to change refresh time of the FOR loop from 100msec to 1msec.
Does anyone have experience with running two PIDs in the same program? Does the timing of the FOR loop influence PID contorller? Does equiring of other data while run
ning PID has effect on the PID?
I would really appreciate any comments/help. I am pretty thrustrated at this time
Thanks"

The timing of the FOR loop will influence your PID control, which is a fundamental part of PID control. Acquiring data doesn't affect the PID although it could affect the timing of the loops. For instance if you only have one DAQ card you would want to have it all in one loop because you can not have two AI sessions open to the same card.
For more detailed information on PID I would recommend reading the "PID Control Toolset
User Manual" which should have been installed to your machine but can also be found at : PID Control Toolset User Manual"
Regards,
JR A.
Application Engineer
National Instruments

Can i run two PIDs at the same time?

Hi
I want to control speed of the rotating shaft and force applied by the pneumatic cylinder using two different PIDs from the same program.
I managed to get two PIDs to work separatly using PID control loop VI`s supplied with labview 6.1 (I got Kc, I and D right, so there is no overshoot). When I try to run both PIDs within my vi they don`t work. I again tried various gains and managed to get one PID to work but not the other. Then through trial and error I managed to get a second PID to work but I had to change refresh time of the FOR loop from 100msec to 1msec.
Does anyone have experience with running two PIDs in the same program? Does the timing of the FOR loop influence PID contorller? Does equiring of other data while
running PID has effect on the PID?
I would really appreciate any comments/help. I am pretty thrustrated at this time
Thanks

I don't know whcih PID vi's you are using but I had similar problems. I
solved it by going to the VI properties of the PID subvi, select category
execution and make sure that reentrant execution is selected. Only then two
instances of the PID vi can run without interfering each other.
Martien
solved by setting the execution mode
"smartlander" wrote in message
news:[email protected]..
> Hi
>
> I want to control speed of the rotating shaft and force applied by the
> pneumatic cylinder using two different PIDs from the same program.
> I managed to get two PIDs to work separatly using PID control loop
> VI`s supplied with labview 6.1 (I got Kc, I and D right, so there is
> no overshoot). When I try to run
both PIDs within my vi they don`t
> work. I again tried various gains and managed to get one PID to work
> but not the other. Then through trial and error I managed to get a
> second PID to work but I had to change refresh time of the FOR loop
> from 100msec to 1msec.
> Does anyone have experience with running two PIDs in the same program?
> Does the timing of the FOR loop influence PID contorller? Does
> equiring of other data while running PID has effect on the PID?
> I would really appreciate any comments/help. I am pretty thrustrated
> at this time
> Thanks

How to get two parameters in the same line of selection screen?

hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?

hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1.

HOW TO PUT TWO PANNEL IN THE SAME PAGE

HI ALL
I NEED TO KNOW HOW TO PUT TWO PANNEL IN THE SAME PAGE TO FULLY UTILIZE FULL PAGE AREA BECAUSE THE PANNEL WIDTH IS TOO SMALL , SO I WANT TO MAKE THE PAPER CONTAIN TO PANNELS VERTICALLY.
THANK YOU

So Barb,
I like to use multiple desktops and move back and forth between then using gestures. At the moment I have 5 open: Chrome, Firefox, Safari, Photoshop CS 6 and a desktop. I use "gestures" to navigate between them:
Mac Basics: Multi-Touch gestures - Apple Support
and I use Mission Control (F3) to move the various desktops around in the order I want them.
Mac Basics: Mission Control - Apple Support
So say I'm searching for a photo to open in CS 6, I find it on the open desktop then hit select "open" in CS 6 and go to that folder in the select pane.
Even right now I'm typing this in Safari and "gesturing" back to Chrome where I did the search about multi touch and mission control. I drag copy the URL there and gestured back here to paste the URL into this text.
If you did a lot of photo searches, I set professional clients of mine in Chicago up with dual monitors (In this case you'd have an external monitor on extended desktop.). So all you need to do is just glance over at the second monitor slide your cursor over there open stuff up find your photo and go back to Photoshop and open it up.
Hope this helps.

How to write two item in the same line?

In the smartforms,how to write two item in the same line?
eg
1 ************* 2 *****************
3 ************** 4 ******************
5 ***************
Anyone got any idea to do this.
Thanks in advance

Hi,
In the smartform the main windows is 20cm.I use the table output my data.Because the output is two item in same line,I define two rows in the table line type.
Question:
Should I define the table width 20cm?
In the main area of table , should I define two folders and each of folder include a line? The second item I had already defined as Append Directly,but the item 1 and item 2 don't in the same line.
Regards

Can i run two widgets at the same time on the same page?

Can i run two widgets at the same time on the same page?
Hi
I have created and published 4 free ibooks and i would to run two widgets
- a countdown clock
- a review test
at the same time on the page. Can i do that?
Thanks in advance
Haris

thanks for your answer. Yes indeed HTML widgets run only full screen (snif snif). I consider this as a "distinguishing treatment".
One solution i read !!!!! was to create through keynote a countdown clock, to export to quicktime move and to imported at iBA predefined widgets. of course this is not the solution i need.
So, in order to have at the same widget and run together a count down clock and a preview test (20 questions) i must
1)"hack" the preview widget and insert a countdown clock
2) create a preview test using iAD.....
thanks again
haris

TS2972 I have multiple libraries on the "same computer" with two different desktops, can't I share between two libraries on the same computer?

I'm trying to use home sharing to share content between libraries so some of the combined content in a given library, can be synced to an ipad. Instad of having mulitple computers, i have multiple libraries on the same computer using two desktops. How do I share within the same computer?

iTunes must be running for home sharing to work. There is no way to have home sharing running simultaniously for two users on the same computer.
Simply add the media files using File > Add File/Folder option in iTunes.

Can I transfer songs between two libraries on the same computer?

I have two libraries on my computer, was wondering if any one knows a simple painless way to transfer music from one to the other.
The reason is my music collection has gotten unfathomably large over the years, and I no longer want it to be that way. I was thinking maybe I could just find someway to "hide" a majority of the songs most of the time, and just show the ones i'm into at the moment. Since i couldn't find a way to do that, i made another entire library (both under the same user), thinking i would keep the bulk in one and the songs i was into for the moment in another, but have them linking to the same folder containing all the music files. This is working fine, but i would love an easier way to transfer the songs over to the favourites library, especially someway to do all the songs in a play list.
Any ideas would be greatly appreciated
Thank you!

iTunes must be running for home sharing to work. There is no way to have home sharing running simultaniously for two users on the same computer.
Simply add the media files using File > Add File/Folder option in iTunes.

How to run two icalenders on the same computer?

Similar Messages

Maybe you are looking for