How to Runtime Change the graph

I'm having a problem with a chart on my template. The user can select different graphs from a dropdown-box. I used the chart designer to configure the layout of my chart & legend.
and i want only 1 series to be display
but when i select or change the graph type  it's shows 3 series..but i want only 1 series display in each graph..
any one help me or send the code to change the graph at runtime..

Have a look at the Oracle Forms benefits demos for version 6i. There are several forms there that use the og.pll library to do this.
The demos are available for download from OTN's Forms page.

Similar Messages

  • How can i change the color of the graph in agreement of the program's condition

    Hi,
    I am using labview 5.1 in my graduation's project final. (sorry by my english, but i am ina hurry)
    How can i change the color of the graph in agreement of the program's condition?
    I am developing a VI to control the temperature of termistors,but i have another sensor too.
    In a graph i have the situation of the termistors,but i want to change the color of the graph when the sensor is active.
    Thanks a lot
    Rafael Wajnsztajn - Brasil

    To change the color of the line itself, you can use the attribute Plot>>Plot Color.
    To change the color of the points, you can use the attribute Cursor>>Cursor Color.
    To select the color, you should have a color box constant inside the Numeric>>Additional Numeric Constants palette.
    This is all in LV 7.0. I'm not sure how it similar it is in 5.1.
    One important thing is to place the attribute node inside a case structure which will execute only when your condition has been filled.
    If this didn't help you, I suggest you post the relevant piece of code, or at least an image of it (no BMPs, please).
    Try to take over the world!

  • How change the graph dynamically based on pivot table.

    Hi,
    My Report having pivot table and bar chart. Organization Name column set as pivot table prompts in pivot table.So Organization Name is appear as dropdown list.If i choose the diffrent Organization Names the pivot table data is according to the Organization Name but no changes in chart.How change the Graph dynamically based on pivot table.
    Please help on this.

    ok.I created pivot table with 4 columns and created chart using pivot table chart options but all 4 columns are displaying chart.But I need only 2 column in chart ..unable to edit the only chart in pivot table.Please help on this.Thank you..

  • How can I change the value of "colorscheme" parameter at runtime?

    Hello all
    Can I change the value of colorscheme at runtime ?
    This parameter can be config in formsweb.cfg file.
    I want to put this colorscheme as "User Preferences" in my application.
    Please help me if some one knows how to achieve this.
    From
    Chirag Patel (Nairobi)

    Hi,
    Try the following. This might help you.
    Edit you Formsweb.cfg file with following code (add the code to your file):
    [look1]
    separateFrame=True
    lookandfeel=Generic
    [look2]
    separateFrame=True
    lookandfeel=Teal
    [look3]
    separateFrame=True
    lookandfeel=Khaki
    and save your file.
    Now, when you call your form in the address bar look for " ? ". After " ? " add config=look1 now your form will take Genric look & feel.
    or
    config=Teal now your form will take Teal look & feel.
    That's how you can change the look & feel at run time.
    Hope that you understand what i want to say......

  • How can I change the SocketFactory at runtime?

    I have a question, maybe someone has had a similar problem. I have a client-server application with communication over RMI. The client may, through a dialog box, choose a connection "submethod":
    * a simple RMI
    * RMI over fixed ports
    * RMI over HTTP.
    After selection the application registers the proper socket factory with the RMISocketFactory.setSocketFactory(...) method. So, if the user disconnects from the server and tries to reconnect with another "submethod", the application throws the following exception:
    java.net.SocketException: factory already definedAPI says "The RMI socket factory can only be set once", so how can I change the connection submethod at runtime?
    Regards,
    Marek.

    You can't.

  • How Can You Change the Look and Feel of Charts in OBIEE 11g

    How Can You Change the Look and Feel of Charts in OBIEE 11g?
    Edited by: user11973122 on Jul 18, 2012 12:13 AM

    Check these files
    OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\s_blafp\viewui\chart\dvt-graph-skin.xml
    OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\views\dvtchart\obips.dvtchart.xml
    OFM_HOME\Oracle_BI1\bifoundation\web\display\chartfontmapping.xml
    Pls mark correct or helpful if helps

  • How can i change the direction of tab canvas in 10g ?

    hi all
    how can i change the direction of tab canvas in 10g at runtime i want to change the direction from left_to_right to right_to_left when i did that the form not appears well
    all prompts of item not dispalyed in order of its sequence ,in spite of that it works in 6i well and change direction without any problems
    i have been used set_canvas_property and set_view_property but it doesn't work
    can anybody help me in this mater?

    please can any body help?

  • How do I change the default properties for Replace(Ins)?

    Acrobat Pro X
    Comment tools: Annotations
    All tool icons EXCEPT Replace(Ins) show "Tool Default Properties" as an option when right-clicked.  When I right-click a particular replacement in the document and select "Properties," there is no option to set current as default.
    So, how do I change the default properties for this annotation tool?  I need to change the Author and the color.
    Thanks,
    Nancy

    Create customized controls for your graphs and controls and setup your favorite attributes .
    Use your custom controls instead of the canned controls.
    Do a search on UI and you will find a community that already created custom controls.
    Visualize the Solution
    CLA
    LabVIEW, LabVIEW FPGA

  • Array of clusters and in the cluster is a bar meter, how can I change the color individually?

    Array of clusters and in the cluster is a bar meter, how can I change the color of the bar meter individually for each element of the array?  I have just figured out that you can't change properties of one element of the array without all elements changing.  For the scaling I had to make numeric indicators for each tick of the scale so that each bar meter in the clustered array would have individual scales.  I also had to do some math to scale each barmeter to display correct proportions from 0 to 100%.  Now I'm stumped on the color of the bar meter.  Basically, if the value goes over a setpoint, the bar meter needs to turn red.  It has to be in an array to be infinitely scalable.
    Thanks
    Matt
    Solved!
    Go to Solution.

    You can't do that-
    without a little trick.
    You could consider laying a custom color box over the bar graph in the cluster you can set the color based on the value of the bar graph or even make a "Pseudo"- bar graph using a series of color boxes stacked to look lie a bar and changing values of the Color boxs from empty to full to red.
    Here is an example to demonstrate
    Jeff
    Attachments:
    Pseudo bar.vi ‏12 KB

  • How do you change the font in WPC Link List Header ...

    Does any one know how/where to change the font in Web Page Composer on the Link List Header?  I am using the Link List header delivered with the product. 
    It looks like it is pulling arial font but we are adding content in a different font in the paragraphs and want the fonts to be the same.  Is there something I can change in the theme?
    thanks
    Angie.

    You need to go to the
    Content Adminstration/KM Content/etc/wpceditor/css/runtime  and look in the sdn_general.css file.  The controls are all there.  You can rename or create a new style sheet as this will modify all WPC sites.

  • How can I change the color of tiles in Wndos 8.1???

    Those tiles made me very hard to find a program, especially there's so many programs.Finding a program is a nightmare...
    How can I change the color of those tiles? Or just let them become semi-transparent?

    Hi,
    The changes of Tile are limited:
    Check the steps under Customizing Start in this article:
    Personalize your PC
    http://windows.microsoft.com/en-in/windows-8/personalize-pc-tutorial
    If you are a developer, you can check this article to customize Start screen tiles for desktop apps:
    How to customize Start screen tiles for desktop apps (Windows Runtime apps)
    http://msdn.microsoft.com/en-us/library/windows/apps/dn393983.aspx
    What about using Search on Windows 8.1 to search your program?
    How to search
    http://windows.microsoft.com/en-IN/windows-8/search-apps-files-settings
    Kate Li
    TechNet Community Support

  • How can I change the source DB?

    Hi all,
    I have implemented an ETL with OWB where the source DB and the target DB both are Oracle.
    Now I have the same source (the same structure, tables, indexes,...) DB in MSSQL. Then my question is: how can I change the connections without modifying the mappings?
    I only want to change the source DB in Oracle to the same DB in MSSQL, therefore the mappings that are getting the data from Oracle then will get the data from MSSQL DB. Is it possible? or I have to create new mappings for MSSQL?
    Many thanks in advance,
    Victor.
    p.d. hope my english is understable

    Hi
    To have one set of mappings that could be switched to point to one system or another would be possible using synonyms to the source, where the synonym could be refined at runtime.
    You can have unbound table operators in OWB mappings that would be the name of the source item. It helps to understand a little about how the code generation works in order to do this. If you use a source table T in a schema S1, and the mappings is in schema S2, then the generated code would refer to S1.T and may even have a dblink so S1.T@dblink, an unbound table operator for table T would simply use the name T in the generated code, this lets you define T however you want in the schema where the mapping is deployed to. So T could be a synonym that points to a local Oracle table for example named S3.MYORATAB or it could be a SQLServer table referenced via the database gateway using MYSQLSERVERTAB@mysqlserverinstance
    Here is a trick to quickly define an unbound table operator based on the table structure of an existing table. You can quickly create unbound table operators that look like other tables by adding an existing table which you have imported into the map, then add a new table operator and add it unbound with a name. Then map from the bound table operators in/out group to the unbound table operators in/out grp, this will define all of the attributes and datatypes, you can then delete the bound table operator to leave the unbound one.
    An alternative would be to copy-paste the mappings and synchronize the source table operators with the SQLServer table definitions.
    Cheers
    David

  • How can I enlarge the graph in a BI JSP Page?

    I create a BI JSP Page, the graph is too narrow, so not enough wide. How can I change the sizew of the graph?
    Thanks in advance.

    Read this:
    http://help.apple.com/pages/ipad/2.2/#/tana29e86157

  • How can i change the image in portal logon screen

    hi guys
    pls tel me
    how can i change the image in portal logon screen
    thanks
    regards
    kamal

    Hi
    Download the par file com.sap.portal.runtime.logon.par.bak from
    Go to System Administration -- Support -- Portal Runtime -- Browse Deployment.
    The path should ROOT/WEB-INF/deployment/pcd. Now download that file into local system.
    Create a Par project and make necessary chenages ..i.e
    Open the downloaded par file with WinZip and inside the lib folder three jar files named com.sap.
    portal.runtime.logon_api.jar, com.sap.portal.runtime.logon_core.jar and umelogonbase.jar will be there. Copy those files in the folder u2018libu2019 in par project.
    Now change a branding Image...i.e
    Replace the branding-image. jpg with your company branding image in the same name.
    Once modifications are done,then create a par project and upload the par file into portal.
    Go to the path System Administration -- Support -- Support Desk -- Portal Runtime -- Administration console.
    then browse the file and click on upload.
    Connect to server where the Portal WebAS is running and go to:
    (drive):\usr\sap\<system id>\<system instance>\j2ee\cluster\server0\apps\sap.com\com.sap.security.core.admin\servlet_jsp\logon\root\layout.
    There you will find the images used on logon screen, you can replace them for your
    company images, please take care with the width of the images, as usual, to make this
    change effective, you must restart the whole WebAS.
    Regards,
    Raju

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

Maybe you are looking for