How to save action attributes as text?

I'd like to save certain action attributes as text to archive along with adjustment files for archived image group adjustments. Anyone know how to copy this to clipboard as text?
Thanks!

I suppose I could do that, but I have a whole bunch of commonly used actions grouped into one set (40+), that would be a bit confusing for anyone trying to replicate the results on another machine, etc. In this case my 'generic level' action includes a SS component that I toggle on and off when needed. I figured just copying the SS attributes as a text file along with the saved .atn file would be adequate documentation. Thanks for the different approach, I'll probably go that route for now. Still would be nice to pull out that action data though...

Similar Messages

  • How to change general attribute of text element

    hi
    who now how to change general attribute of text element on screen dinamically? I wish to change text value dinamically for example.

    Hi Denis,
    I am not too sure on what you want.
    If you require that the text value be different based on some conditions you can declare as many text elements as conditions and call the relevant text element.
    But I dont think that you can assign dynamic texts to a single text element.
    Regards,
    Saurabh

  • How to save change in 3D text and Object that being made in photoshop cs6..

    I  was  wondering  how do I save change for 3D text and objects.
    let said the first text i type is Adobe but i want to change it to Microsoft.
    how can I  save that change in 3D  from Adobe to Microsoft.
    thank in advantace.

    You haven't said what version of Pages you are referring to.
    Hold down the option key when you go to the File menu and Save As… appears.
    It was Apple stiff necked response to users complaint about its removal. They couldn't just put it back.
    Once you do do this it is pretty much what it was before.
    Peter

  • How to save actions from exchange going directly into CS3

    I posted this in the NAPP forum, but I haven't gotten a solution yet. I hope someone here can help.
    I downloaded quite a few actions from Adobe exchange. When I did, I got the choice to either put them in a folder or open them in CS3. Many I just clicked to open in CS3. It was more time efficient. However, there are many of them, and I was looking specifically for a cartoon effect (which I don't use very often--special project) However, while I was looking, I found many other interesting actions. Anyway, I would like to clean up the actions area and bring up only the ones I use all the time. Generally I hit clear actions or reset actions and then I bring back in the ones I want. I'm afraid to do this because these actions are not listed in the actions folder. What will happen to them? Will they go away? There are quite a few of them, and I don't want to have to redownload them. Since they are not listed in the actions folder, how can I get them listed and make sure that I can access them again?
    I have tried creating a set to move them into. That didn't work. I tried highlighting all of them to put in a set. That didn't work. If they are selected, the flyout menu save actions in grayed out. How do I get them into the action folder?
    Any help would be appreciated.
    There are a lot of great brushes and things in the exchange, too. That I will tackle next after I figure out what I'm doing with the actions. (With help from the forum, of course)
    Thanks

    Good point: One can only save one Action Set at a time.
    Photoshop really doesn't care where you save .atn files. In other words the folder in which one saves Action Sets (via Save Actions... or via download from the Internet) does not have to be
    \Presets\Actions
    The benefit of saving .atn files in \Presets\Actions is the file names of .atn files in this folder show up at the bottom of the Actions Palette menu, facilitating easy loading into the Actions Pallete. For .atn files saved elsewhere, the Load Actions... command will do the trick.
    >re: I know I physically saved them into folders, but I should be able to see them somewhere, shouldn't I?
    Yes.
    Try this (assuming you are using Windows XP; if Vista it will be something of this nature):
    * Start > Search > For files or folders
    * Type .atn in the box labeled "All or part of the file name"
    * Click 'Search'
    When the search is complete, you should see the .atn files you saved plus any others on your computer.
    Hang in there. You'll be an action monster before you know it. :)

  • How to save input from a text file in to array

    I got this assignment, and almost have no clue, and my teacher doesn't even teaches us anything
    This is what i am suppose to do
    5. The program must store the following data about each student in this Talent Show:
    * The student's name (store as a String)
    * The student's average time score [only for the events they competed in] (store as a Double)
    Note: Some of the data comes directly from the text file, and some of the data must be calculated from the data that is read from the file.
    6. The program must search through all of the student's scores to find the student who has the minumum average time of all students.
    7. You must calculate how many events each student played. Zero values are not counted.
    8. You must then generate a report on the screen that prints out
    * the total number of students in the competition,
    * the winning student's ...
    o name
    o times
    o average time (rounded to one decimal places)
    Sample output
    btw this is the data file
    Bart Simpson
    7.5
    12.3
    7.8
    19.2
    9.9
    5.3
    8.5
    11.8
    2.2
    4.6
    Stewie Griffin
    9.5
    29.7
    7.8
    22.5
    9.9
    12.6
    8.5
    0
    8.2
    0
    Pinky
    2.5
    0
    1.8
    0
    3.9
    0
    6.5
    0
    5.2
    12.1
    Rocky N Bullwinkle
    10.0
    22.2
    9.5
    17.5
    9.9
    1.5
    8.7
    23.7
    9.2
    11.0
    Angelica Pickles
    5.5
    11.1
    6.8
    12.2
    7.9
    13.3
    8.1
    5.1
    7.2
    7.9
    Pink Panther
    8.5
    5.5
    8.8
    6.6
    8.9
    7.7
    9.9
    8.8
    2.2
    9.9
    Josie
    9.5
    0
    8.8
    12.2
    9.9
    0
    8.5
    0
    9.2
    5.3
    Rogue
    8.5
    1.1
    7.8
    2.2
    7.9
    3.3
    7.5
    4.4
    8.2
    5.5
    Usagi Tsukino
    8.5
    15.5
    8.8
    30.1
    9.9
    19.7
    9.5
    11.0
    8.2
    8.6
    Yosemite Sam
    0
    15.2
    0
    29.5
    3.9
    0
    0
    16.0
    0
    7.7
    My code so far
    import java.io.*;
    public class test
        public static void main (String [] args)
            FileInputStream File1;
            DataInputStream In;
            String fileInput = "";
            try
               File1 = new FileInputStream ("data.txt");
                In = new DataInputStream (File1);
                while (In.available () > 0)
                    fileInput = In.readLine ();
                    System.out.println (fileInput);
                In.close ();
            catch (FileNotFoundException e)
                System.out.println ("Error - this file does not exist");
            catch (IOException e)
                System.out.println ("error=" + e.toString ());
    }My question, how do i save the data in to an array, and how do i seperatly save names in to different array, and their scores in to different arrays
    bte he said you can use scanner class
    Thanks
    Edited by: supahsain08 on Mar 26, 2008 2:55 PM

    supahsain08 wrote:
    Well, you are not in my class and you don't even know my teacher
    who are you to judge meHe is jaded by our experiences here. 99% of posters who complain that the teacher doesn't teach have adequate (note that I didn't say good) teachers, but it's the student who is failing to take responsibility for his own education. It is after all your responsibility and complaining won't help you any.
    Good luck.

  • How to save picture in a text to camera roll in ios7

    How do I save a picture that was text to me to camera roll in IOS7?

    tap on the picture and it should open in a new screen then hit the icon on the top right wiht the arrow pointing up
    then you'll get a bunch of option. 

  • How to Save image in a text to my photos

    How do I save the photo in a text message to my iPad air photos?

    Tap the image in Message. (If you touch too long it brings up the: Copy; Other... menu instead)
    This blows the image up to full screen.
    Touch the image again to get menu options.
    In the top right corner, tap the box with the up arrow.  One choice is Save Image.  Touch it to save to your camera roll.
    In the top left corner, the three-line menu shows you all the photos in the message string, and some metadata like image size and camera title/image number.
    This is in IOS 7.1.1 on an iPad, and should work on iPhone and Touch also.

  • How to save new edits and text to photo without creating a new file

    I am a new user of PSE 7.  I am able to enhance and add text to my photos but can't save the edits without creating a new PSD PSE file in addition to the original unedited photo.  How do I save the phto itself as edited?

    99jon wrote:
    If you really want to make your changes irreversible then use “Save As” and select file type from the dropdown list e.g. jpeg and enter the exact same file name as the original. Click OK to save and OK to overwrite the original.
    While this of course is the answer to the question, the idea of overwriting the original is simply a bad idea. If you do this, you can never get back to your original and start again. That text will always be there.
    I advise the original poster not to do this. Save your edits as a different name.

  • How to save transient attributes?

    Hi,
    I have a query related to saving the View Object transient attributes :-
    Following is the scenario which we want to implement:-
    1. We have a  page on which we are using a table component with 5-6 VO transient attributes and n number of rows.
    2. There is a save button on the page which allows user to save the activity which he is performing and able to resume the activity later on.
    3. As soon as he click on the save button, all the EO attributes get persisted.
    4. When he re-opens a flows, he can see a resume button which allows him to resume the activity from the point he left.
    5. So User should be able to see the changed he made on the table component on clicking the resume button which he made before saving the activity.
    Now, the question is how we can retrieve the transient attributes on resuming the activity or is there any way by which we can save the transient attributes of View object ?
    Please help !!

    Refer
    ADF Practice: Passivation and Activation of View Objects with Transient Attributes

  • How to save data results into text file

    I want to solve an equation of degree 2 for example, and results are displayed in a text file

    Like many other software coding forums, we don't want to give hand outs.  We are more than happy to give hand ups.  Show that you've tried to figure out the problem and show us where you are stuck.  Then we will be glad to help you get you unstuck.  If we just give you an answer, you will learn nothing.
    As far as writing to a text file, look in the File I/O palette for the Write to Text File primitive.  Also, if you go to Help->Find Examples... and do a search for "text file" you will get some examples of how to use it.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How to save Subtitles Settings in Text?

    I have a Subtitle-heavy doc to editt, and the tiny letters in Final Cut are killing my eyes (I was told at Tekserve in NY the Apple will come out this Fall with a way to make theletter bigger within the application).  Is there a way to save the Font, Size, Outline Text, placement in the generator that comes with  the capital A at the bottom right of the Viewer?  Many thanks.

    I'm not sure exactly what you're asking, but if you want to save a 'template' of sorts for your subtitles, or other text elements, simply drag one into the Favorites folder in the Browser window.  Then you can drag it to the Timeline anytime you want and change the text as needed.  Personally I use the Boris Title 3D text generator or Photoshop for all text.  Also, I wouldn't be too concerned about what Apple is planning - anything they develop will only be for FCP-X and won't work for older versions of FCP.
    An alternative method that I've used for years is to create a 'Favorites' project in FCP.  In that project I've saved several title styles I've created that I think I might want to use again in the future, along with all of my favorite transitions and filters by applying them to text clips in the Timeline.  Should my preferences become corrupt or the computer need to be replaced or whenever I upgraded FCP in the past, I can easily open my Favorites project file then drag those items to the Favorites folder again.
    As for the small text size, if you're using FCP 7, you can size adjust some of the interface fonts in preferences ... or you can decrease your display resolution ... or get better glasses.
    -DH

  • How to Save SQL query template as a text file

    Hi,
    How to save a SQL query template in my server as a Text file?? I tried using Text saver but it is not getting saved in the path specified.
    Sweety

    Hi Sweety,
    In the transaction editor (for business logic), add your query template to a transaction.  Add a Tracer after and link the Query property of the SQL Query action block to the Message property of the transaction.  Run the transaction and you will see your Action Block's sql script as the message from the Tracer.  You can do the same with the Server property, SD and ED, etc.
    Also if you wish to dynamically load the sql script into the query, you can do that at run time by linking a script source to the query property.  Useful to have if you have to use a complex expression to dynamically create your script.  This sometimes occurs when you have multiple filtering inputs from a webpage and you can reduce the number of tables in a complex join when the fields are left empty.  Normally this would be done as a way to improve the performance of the query.
    Hopefully this is clear.  If not I can probably provide some sample expressions.
    Regards,
    Mike

  • I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them?  Can I back those up to iCloud?  My phone was very likely hacked (Apple's advice was to call the police!)

    "I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them?  Can I back those up to iCloud?  My phone was very likely hacked (Apple's advice was to call the police!)"
    That was all I could put in the initial "box."  Then it brought me to this page with instructions on how to write a good sentence.
    Proceeding ...
    After going back and forth between Apple, AT&T and the police (all telling me to go to the other two) I took AT&Ts suggestion and got a new number. One tech warned against doing a backup, especially on my Mac, saying if my phone had been hacked then whatever bug was there would then invade my computer. But nobody knows how to determine if the phone has been hacked or a virus was planted there. Unfortunately I know who would have reason to do such a thing and all I can say is that he is at the top technologically and could easily do it. Almost impossible to prove, however.
    So I need to preserve my text messages and my emails as well. I backed up my photos to that Microsoft product (One-Drive) and it froze (Surprise, Surprise) with four short videos to go, and no way of stopping that (when I tried it crashed repeatedly) so I'm in crisis mode here.
    Help ...
    Running 8.0 on 5S
    Thanks!

    Betty I don't know if you fixed your hacking problem but I feel your pain. I've seen some strange things going on between my iMac and my iPhone and Apple has told me the same thing, call the police which I have done. The hackers have stole 500.00 out of my checking account have access to every internet account I use and no matter how often I change the password their right back on the account. I closed my FB account 3 times only to have someone reopen it. Right now I've got a link in my reading list (Safari) that if I click on it, it allows me to log onto my FB account anonymously.
    I've seen a green folder come out of no where while I was trying to delete my passwords out of keychain when that green folder was put into the key chain I was immediately locked out. I than went into system preferences to try to make changes to my security settings, when I clicked on the icon it wouldn't open. I've seen log files of automator receiving commands and sending out my personal information thats on my computer.
    I have a legitamate program called iExplorer that allows you to look at the contents of your iPhone back ups and saw a transaction someone made at the Apple store for some full length movies, some albums, ibooks and other apps but when I called the iTunes store and they said none of those items were showing up on my account. If their not on my account how can they be on my iPhone 6? One day someone was using my gmail account and unknowingly used google maps to search for an Italian restaurant, than a Mexican restaurant than a coffee shop and their search showed up on my iPhone but I didn't have my gmail account installed on my iPhone 6. Using my computer I logged onto my gmail account and looked at the maps history and sure enough there were the searches when I'd hover my curser over the link it gave me the longitude and latitude of the where the hacker was when he was using google maps. I know whoever reads this thinks Im crazy but I've documented everything and can prove the things that I have mentioned in this post actually happened.
    One day I had my laptop (pc) and my iMac next to each other as I was using both. when I clicked on airport it showed that my laptop and my iMac had made a connection and were actually communicating with each other. I know I didn't do it I don't know how. The iMac was logged into my iCloud account while my laptop wasn't. I have formatted my iPhone at least a dozen times, Apple and an Apple retailer have formatted my hard drive not to mention the numerous times I have formatted it but the hackers keep getting on my devices. Im formatting my lap top at this very second because during the course of the night I left the ethernet cable plugged into it and they locked me out of my c: drive, and configured the system so I can't download any updates from Microsoft, overtime I type in www.microsoft.com it changes to ww38.microsoft.com which takes me to a blank page. I right clicked on the page I was redirected to and read the java script and couldn't believe that someone had actually configured Internet Explorer to redirect me to a blank page when I tried to go to Microsoft. Apples answer to all this is there was nothing wrong with my iPhone or my iMac and if I thought there was a problem to call the police which I have done.
    Theres no doubt the hackers are reading this while I type it or will read it and I simply don't care anymore. I no longer email anyone, don't use my iCloud account and have taken precautions to protect my credit but if I ever find out who has invaded my privacy to this extreme the police are going to want to talk to me because Im going to hurt them like they've never been hurt before

  • How to save a text or file in *doc from Pages?

    How to save a text or file in *doc?

    Igor,
    Use either File > Export, or Share > Export, and choose the Word option.
    Jerry

  • How are attribute and text master data tables linked in SAP R/3?

    Hello,
    how are attribute and text master data tables linked in SAP R/3?
    Most tables with attribute master data like T001 for company codes,
    have a text master data table T001T (add "T" to table name).
    When looking at the content of table T001 via transaction se11,
    the text are automatically joined.
    But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
    has no text table TVBURT), but in se11 you get texts. There is an address
    link in TVBUR, but the Name1, etc. are empty.
    a) Where are the text stored?
    b) How does the system know of the link?
    Hope someone can help!
    Best regards
    Thomas

    Hi Thomas
    The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
    The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
    -> Foreing key with table TVBUR
    -> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
    ->Cardinality-> 1-:CN
    It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
    U can find out the text table of master table by SE11: GoTo->Text Table
    U can fined some information in table DD08L.
    Max

Maybe you are looking for