How to save data in a string control?
I want to save data in a string control or indicator. I know that I can rt-click and make the data default. But can it be done through a proberty node or something else when the program is running?
There isn't a "Make Current Value Default" method that you can invoke programmatically, this would require your VI to be saved when it was closed, which obviously couldn't be done if it had been built into an executable.
You could read the values from the controls/indicators and save them in a .ini file using the Configuration File VIs on the File I/O palette, and have some code at the start of your program that reads the values from the file and puts them into the objects using local variables.
Similar Messages
-
How to save data in ztable after editing in alv report
how to save data in ztable after editing in alv report?
Hi,
Please find the attachment below.This may be usefull to you.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ALV-Editingandsavingtheeditedvaluesin+Database%28OOPS%29]
Regards,
Ramakrishna Yella. -
Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory
Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments -
How to save data model design in pdf or any format..?
how to save data model design in pdf or any format..?
i ve created design but not able to save it any mage or pdf formatFile -> Print Diagram -> To PDF File
-
How to transfer data in A tableview control in transaction ME21n
Dear friends,
I m new in the field of SAP ABAP.
And right now i m trying to transfer the data in a tableview control in transaction ME21n. I've recorded the sequence of mandatory fields in transaction ME21n but, when i try to transfer the data using BDC call transaction method the order of manadatory fields change.
I m trying to transfer data from text file.
If anybody has a solution to this problem please tell me how to sort out this.
Thanks in advance.Hi Vivek,
Welcome to SDN.
BDC solution will not work with transaction ME21N.
ME21N is an enjoy SAP transaction which has a lot of new objects that BDC can not call/use.
Please use transaction ME21 instead of ME21N.
Hope this will help.
Regards,
Ferry Lianto
Please reward points in helpful. -
How generate a XML file & how to save data in that file?
hi,
How to generate an xml file & how to add data in that xml file? is there anyone who can help me about this? Firstly i need to open a xml file and after that i need to save user data in that file? how i will do it? What will be the solution of this? please give me solution........
with regards
BinaWith an API like Xerces you can parse an XML document into a DOM tree. You can do modifications on that tree manually and then write it back out as XML data.
http://xerces.apache.org/xerces2-j/ -
How to save data after clicking checkbox stored in databasetable
TYPE-pools: slis.
tables:mkpf,mseg,mard.
TYPES: BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
checkbox TYPE c,
__mark,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
14 '__MARK' 'XFELD' space space space 'Select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'LIFNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
=========================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'XXXXX'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Example Code
Executes a command considering the sy-ucomm.
CASE r_ucomm.
WHEN '&IC1'.
Set your "double click action" response here.
Example code: Create and display a status message.
DATA: w_msg TYPE string,
w_row(4) TYPE n.
w_row = rs_selfield-tabindex.
CONCATENATE 'You have clicked row' w_row
'field' rs_s lfield-fieldname
'with value' rs_selfield-value
INTO w_msg SEPARATED BY space.
MESSAGE w_msg TYPE 'S'.
ENDCASE.
End of example code.
ENDFORM. "user_command
this is mycode,mblnr, matnr and checkbox both field had created in database table
then save data after clicking checkbox data stored in database table,and next clickin checkboxes are no change. this my requirment.
plz send me code .Try this
In user_command form...
LOOP AT IT_DATA.
IF CHECKBOX __MARK EQ 'X'.
write logic wht u want....
ENDIF.
ENDLOOP. -
How to save data from text file in databse for a transaction...
Hi Guys,
I have a text file which has some data related relevant to transaction VA01 separated by tabs.
Now instead of going in the transaction in VA01 and thne feeding the data manually, I would like this data
to get read automatically from the text file and get processed field by field for transaction VA01 and thne get saved.
How do I achieve this ? Do I have to use SHDB or some other method ?ahi tushar,
REPORT ZCALL_TRANS_TAB1 .
TABLES: LFA1,LFBK,lfb1.
*& internal table declaration
data: BEGIN OF it_vendor occurs 0,
LIFNR LIKE LFA1-LIFNR,
bukrs like lfb1-bukrs,
END OF it_vendor.
DATA: BEGIN OF IT_BANK occurs 0,
LIFNR LIKE LFA1-LIFNR,
BANKS LIKE LFBK-BANKS,
BANKL LIKE LFBK-BANKL,
BANKN LIKE LFBK-BANKN,
koinh like lfbk-koinh,
END OF IT_BANK.
data: it_bdcdata like bdcdata occurs 0 with header line.
data: it_messages like bdcmsgcoll occurs 0 with header line.
*selection screen.
selection-screen: begin of block b1 with frame.
parameters: p_file like rlgrap-filename default 'c:/vendor.txt'
obligatory.
parameters: p_file1 like rlgrap-filename default 'c:/xyz.txt'
obligatory.
selection-screen: end of block b1.
*at selection screen.
at selection-screen on value-request for p_file.
perform f4_help using p_file.
at selection-screen on value-request for p_file1.
perform f4_help1 using p_file1.
*start of selection
start-of-selection.
*******uploading file
perform upload_file using p_file P_FILE1.
******open session.
perform populate_data.
*& Form f4_help
text
-->P_P_FILE text
form f4_help using p_p_file.
data: l_file type ibipparms-path.
call function 'F4_FILENAME'
importing
file_name = l_file.
p_file = l_file.
endform. " f4_help
*& Form POPULATE_DATA
text
--> p1 text
<-- p2 text
form populate_data .
DATA: L_STRING TYPE STRing.
DATA: L_COUNTER(2) TYPE n.
loop at it_vendor.
perform bdc_dynpro using 'SAPMF02K' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-D0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
it_vendor-lifnr.
perform bdc_field using 'RF02K-BUKRS'
it_vendor-bukrs.
perform bdc_field using 'RF02K-D0130'
'X'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-bankn(03)'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
******CALL TRANSACTION.
call transaction 'FK02' using it_bdcdata mode 'A'
messages into it_messages.
write:/ sy-subrc.
perform format_messages.
clear it_bdcdata.
refresh it_bdcdata.
endloop.
endform. " POPULATE_DATA
*& Form FORMAT_MESSAGES
text
--> p1 text
<-- p2 text
form format_messages .
data: l_msg(100).
loop at it_messages.
call function 'FORMAT_MESSAGE'
exporting
id = it_messages-msgid
lang = sy-langu
no = it_messages-msgnr
v1 = it_messages-msgv1
v2 = it_messages-msgv2
v3 = it_messages-msgv3
v4 = it_messages-msgv4
importing
msg = l_msg
exceptions
not_found = 1
others = 2
write:/ l_msg.
endloop.
endform. " FORMAT_MESSAGES
*& Form bdc_dynpro
text
-->P_0173 text
-->P_0174 text
form bdc_dynpro using value(p_program)
value(p_screen).
it_bdcdata-program = p_program.
it_bdcdata-dynpro = p_screen.
it_bdcdata-dynbegin = 'X'.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_dynpro
*& Form bdc_field
text
-->P_0178 text
-->P_0179 text
form bdc_field using value(p_fnam)
value(p_fval).
it_bdcdata-fnam = p_fnam.
it_bdcdata-fval = p_fval.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_field
*& Form upload_file
text
-->P_P_FILE text
-->P_P_FILE1 text
form upload_file using p_p_file
p_p_file1.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_VENDOR
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
*******UPLOADING BANK DETAILS
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE1
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_BANK
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
endform. " upload_file
*& Form f4_help1
form f4_help1 using p_p_file1.
data:l_file1 type ibipparms-path.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = l_file1.
p_file1 = l_file1.
endform. " f4_help1 -
How to save the value in Cedit control into a text file bu using measurement studio c++?
Im using measurement studio c++ to create a application. How to save a randomly generated value which display in the CNumberEdit Control to a text file? how to do the coding part?
You can use the CNiFile class to write the value out to a file. For example, create a new Measurement Studio C++ project and follow these steps:
Add a CNiNumEdit to the dialog.
Add a member variable for the CNiNumEdit called m_numEdit.
Add a button to the dialog.
Double-click the button to add a message handler for the button's BN_CLICKED message.
Add the following code to the button's BN_CLICKED message handler:
CNiFile file("C:\\Values.log", CFile::modeCreate | CFile::modeWrite | CFile::typeText);
file << m_numEdit.Value << endl;
file.Close();
Run the application, edit the CNiNumEdit's value, and click the button. The value should be written to the Values.log
file as specified in the code above.
Hope this helps.
- Elton -
How to save data aquired with NI mydaq and save it in a data base using Labview?
i have developped with labview an interface that can control automatic irrigation station using two sensors ( humidity sesonr and temperature sensor) so i want to save data aquired during a year in a data base so i can compare these results in the next year please help me to do that in my interface labview and thanks
Attachments:
PFE.vi 223 KBThere is a database toolkit for LabVIEW. I don't think it is a free download however. With the Data Manipulation toolkit, you can integrate with most databases that use the ODBC protocol.
If you don;t need anything fancy, you can write the values out to file using the write/read spreadsheet VIs. If the file is [COMMA] or [TAB] delimited, you can import it into your database with ease.
Another approach is to format you output to a text file as SQL, and import the records that way.
INSERT INTO TEMP_HUM_TBL (Temperature, Humidity, Txn_Date)
VALUES (30, 95, 'Dec-24-2013');
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions -
How to save data from a waveform chart to a file?
Hi! I have a question:how to save a real time data from a waveform chart? attachement is a example,how can i do to save the data from 0 second to 25 seconds to a file ?thanks!
Attachments:
example.vi 23 KBYou can use a property node to get the chart history as a array. Then you can write that data to the file. The data in the array in you example can also be writen to a file. If you only wnat a portion of the data to be saved, use the Array Subset function to get the part you want.
Lynn -
Offline Adobe Form using GP - How to save data to SAP
Hi,
I have the following requirement.
o An offline form is sent to different users and when they fill the form and Click on Submit, the data should be saved to SAP.
o When the data is submitted, it should be recognize the user and multiple clicks if any so that data is not duplicated
I have used Guided Procedures for this. I have created an Interactive Form callable object with an xdp template and "Create offline Interactive form and send by e-mail" option.
Problem:
1. The document emailed to user can be submitted only once. My requirement is whenever form is submitted it should update the previous data.
2. How to save this data to SAP?
Version:
SAP NW SP12
Adobe Live cycle designer 7.1
I have gone through various blogs on Adobe Offline interactive forms and GP but I could not get a solution for this. Please help.
Thank you,
VasuHi,
IMHO there is no easy solution for your requirement. However there is a workaround: you can create so-called "impersonalized" forms. They can be sent or returned as many times as needed from same or different users. However the effect will be that for each form sent out and accepted by GP, GP will start a new GP process. That means that the forms are the first step of such a process - so to say.
An offline form "in the middle" of a process can be embedded into the process as a dedicated step only. Once this form is returned to GP by the user, the process is continued and 2nd or later form returns are ignored. However there is the possibility to build an additional step into GP to check the input data and if they aren't valid to send out the form to the user once again.
So you see that there are some possibilities but no straight forward solution for your needs. Hope I could help anyhow.
Regards,
Jan -
How to save data acquired from NI-DAQ in text format instead of TDMS using the DAQ-mx ANSI C code?
Hi,
I wanted to save data acquired from NI-DAQ (for example, NI 9234) in a file using the DAQ-mx ANSI C Code. The response I got was as follows:-
One way to do it is with TDMS logging. DAQmx comes with functions designed to log to a TDMS file. This is a special file type that is used for collecting data in a logical format. It can be displayed in a TDMS viewer where data is separated into groups and channels. NI-DAQmx provides examples for how to log to TDMS. Look at the TDMS examples in the C:\Users\Public\Documents\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Analog In\Measure Voltage directory.
However, now I want to know is there a way that using that same C code, can we save the data in a .txt file format (Text File) instead of a TDMS file? We actually want to access that file through MATLAB (that's why we want to save it in text format).
Also on an other note, is there a way we can access & open TDMS files by MATLAB?
Thanks,
Sauvik Das GuptaThere's a way you can access TDMS files in MATLAB:
http://zone.ni.com/devzone/cda/tut/p/id/7446 -
How to save data in 4-bit mode instead of U8
Hi
I use LabVIEW to acquire and save data through the counter timer PCI6602.
My signals are really low so the data can be expressed in 4-bits (0-15).
I have used the conversion to U8 and write them using "Write Binary Files"
So this uses 1 byte for each data point but I would like to reduce it to 4bit (half byte) for each data point.
Can anyone help me with this?
I am attaching my program for reference
Solved!
Go to Solution.
Attachments:
DAQ-longvector1.vi 64 KBHere's some easy code how to do it.
Note that this code assumes that the data is 4bit (0..15). If any of the upper 4 bit are set, you've got problems, of course
See if this makes sense. Good luck.
This example uses a single 1D array. You would eliminate the decimate/interleave and just use the two arrays.
A small comment to your code. There are a few weird constructs, but the use of two "split array" operations to take a simple derivative seems overkill. This made a honorary mention in the Rube Goldberg Hall of Fame.
Message Edited by altenbach on 12-04-2008 05:18 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
8bitTo4bit.png 18 KB -
How to save data in columns with headers?
I'm trying to save 10 different types of data into individual columns with headers, but I can either get one giant column of data with the given header at the start of each data set (imbeded in the column) or I can get the headers in different columns, but the data all in one row. This seems like a simple problem, but for the life of me I can't figure it out--HELP!
I've attached my code...don't laugh, I think I've created a monster trying to figure this out. What I'm trying to get is one column with the header "Power (watts)" and then the power data in that column, one column with the header "angular acceleration (rad/s^2)" and then the angular acceleration data in that column, and so on...
Thanks!
Attachments:
RILE-25.vi 335 KBHi
Take a look at this VI / Block diagram pic
Here, I am demonstrating how to write data to a file column wise along with relevant column headers
Hope this helps
Regards
Dev
Attachments:
header_column data.JPG 49 KB
header_column data.vi 20 KB
Maybe you are looking for
-
anyone out there use the Alarm Clock app? it looks great its easy to set up but mine didn't go off this morning (good job i had a back up!) it says to set the alarm and leave it running in the background i did this but nada - nothing anyone else have
-
So I've been having problems with my mac for a hiwle now, first the charger wouldnt worlk, then the computer would randomly shut off. I had to use those CDs that come with the computer and restart everything again. Finally, the charger started workin
-
0 down vote favorite I am using oracle 10g. I have a temp table TEMP. TEMP has following structure:- USER COUNT TYPE 1 10 T1 2 21 T2 3 45 T1 1 7 T1 I need a query which will show all types has column names,and types can be any value like T1,T2,..Tn a
-
Where are my documents that were located in the Adobe reader on my mobile phone before the update
I cannot find my documents that were located in Adobe reader before this update creating the cloud. How do I retrieve my documents?
-
What's the best treadmill mount for ipad
Anyone use some kind of mount on a treadmill?