How to Schedule a particular request from Datasource to Data Target

Hi Freinds,
I have loaded x no of requests of flat file sources to the data source(p.s.a) , But i am unable to load particular request no to the data targert(incube) throgh D.T.P.
Thanks & Regards
P.vishwam

Hello,
You may try the this option.
Right click on the datasource -> Manage. Now you can see all the PSA requests. Now, click on the traffic light button of all the requests except the request that you want to load, and set their status in to red.
Now if you run the DTP, it will pick only the green one. After the DTP is completed, you can change back those red requests into Green status.
Hope this helps.
Regards,
Bijesh

Similar Messages

How to push a perticular request from PSA to Data target using DTP in BI

Hello all.
I have mulitple requests in PSA & wanted to move only perticular requests (Randomly, say first request & last request ) to data target using DTP in BI 7.0. How can we do this.. ? Is there any option in DTP (BI 7.0)for selective loading of requests from PSA to Data Target..
Thanks in advance..
Cheers,
sami.

Hi,
It is possible by using 'zero fetch' in DTP
If you want only the recent req to be loaded.
1. In PSA, change the status of the recent request to red
2. Do a zero fetch
that is processing mode - No data transfer; delta status in source: fetched
With this processing mode you execute a delta without transferring data.
3. change the particular request status back to green
4. Run a delta load
Regards,
Priya.D

How to delete a single request from DSO in BI 7.0

Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
Prathap

IN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk

Delete a particular request from a InfoCube after compression in sap bi 7

HI ,
Issue : I wand to delete a particular request from a InfoCube after compression in sap bi 7.0 ; (not in sap bow 3.x).
can any one suggests me how to do .give me possible solutions.
Regards,
EdK...

Hi,
You can delete the perticular request from Infocube by useing'RSICCONT'.
Goto SE16, give the 'RSICCONT' then Select your Cube and Select Execuite.
It will display the list of requests. you can select the perticular request and deleted from cube.
Edited by: Suman Reddy.Vuyyuru on Mar 18, 2010 12:38 PM

Can we delete particular request from ODS

Hi All,
Can't we delete particular request from ODS?
there are dozen of successful requests in ODS, when i deleted one successful request from the middle, all the subsequent requests lost the tick which indicates they are updated to cube. Is there any way that i can undo this one?
can we do selective request(successful) deletion from ODS?
Thanks in advance.
Robyn.

Hi Samara,
what i was trying to do is re-arranging the requests according to chronological order, which are not in. imagine the scenario
ODS requests      cube request
5         ->             E
4         ->             D
2         ->             B
3         ->             C
1         ->              A
what iam trying to do is put them in sequence
ODS request        cube request
5                           E
4                           D
3                           C
2                           B
1                           A
If i delete 3rd ODS request put it over 2 it won't accept as the request number is lesser than that of 2nd request.
can we reconstruct any request from reconstruction tab or just the latest request?
How does this effect the data which is already updated to cube from ODS?
Regards,
Robyn.
Message was edited by:
        Robyn Hoggard
Message was edited by:
        Robyn Hoggard

How to submit a concurrent request from Discoverer report.

I would like to know If any one has tried submitting a concurrent request from Discoverer Report?_
This is no stupid question, but our team here finally decided with a solution to our long pending issues with few of the discoverer report. To Proceed further, we would like to know, how to submit a concurrent request from Discoverer report?
We are looking for calling a package from the Disco admin by passing the parameters from the disco to the 6i report.
All help us in this regards are much appreciated.
Kindly help us in the same!
Thanks
Arun

Thanks Rod for confirming the same.
I will be trying the same today and will let you know if I succeed in doing it.
If I can share the actual requirement with you, it goes like this.
"I will be triggering the Oracle 6i standard AP Trail balance report through the Disco report. The standard report will be inserting the required data to one of my custom table. Once the concurrent program completes normal, my custom table will be having the required data to create the workbook specific to the current run of the concurrent program.
The one problem which I think could happen is, How can I make my disco report to wait till the standard program to complete in normal so that my disco report can be generated with the data from custom table.
Will the above requirement is possible If I follow the way you mention in the PDF or Could you suggest a better way for achieving the same.
In short, my requirement is: The custom table(say XX_TABLE) will be populated with data when the standard 6i report is run and the disco admin will be making of the custom table (XX_TABLE) to generate the report.
Please advice.
Thanks
Arun

How to schedule a concurrent request to run at a specified time/day?

Hi All,
How to schedule a concurrent request to run at a specified time/day (ex: Sunday 12pm)?
Thanks,
Chiru
Message was edited by:
Megastar_Chiru

Is this to run periodically ?
During the request submission, click schedule, choose the specific days, and click on S = Sunday.
Change the start date on the date of the sunday you want to run, eg : 15-JUL-07 14:00:00, change the end date as well.

HT5463 how i can block particular number from my contacts list

how i can block particular number from my contacts list please guide me because even true caller software is also not supporting iphone

As Ocean20 said, there is no official function that does this built in. What you could do however is to find an app that mute calls that come from "blocked" numbers.

How to transfer the http request from applet to servlet/jsp

I use the JTree component to create a navigation of a website,but i don't
know how to connect the tree's nodes with the jsp/servlet.
I mean how to transfer the http request from the applet to a jsp.
I use the "<frameset>" mark which will divide the web browse into 2 blocks.
The left side is Applet,and the right side is the linked jsp page.
what I say is as the weblogic console layout.
who can help me!!!
Thank You!

I use the JTree component to create a navigation of a website,but i don't
know how to connect the tree's nodes with the jsp/servlet.
I mean how to transfer the http request from the applet to a jsp.
I use the "<frameset>" mark which will divide the web browse into 2 blocks.
The left side is Applet,and the right side is the linked jsp page.
what I say is as the weblogic console layout.
who can help me!!!
Thank You!

How to send the transport request from one client to other client?

Hello Friends,
I have generated one transport request in one of the client in Development server.Now as it is customizing request so unless and until i transport it to other client within the same server, Changes will not be visible in other clients.So how to transport this customizing request from one client to other client within the same server.
Thanking you guys in advance.
Regards,
Jitendra

Hi Jitendra,
Release your Transport Request via SE10, then go to STMS & import the request first to your quality server, then to your production server.
Apologies for the incorrect inputs, please use SCC1 as advised by other forum members
Hope the above clarifies your query.
Regards,
Vivek
Edited by: Vivek on Mar 16, 2009 1:05 PM

How to remove a particular gadget from windows7 image

sir how to remove a particular gadget from all other existing gadgets in windows 7sp1 image, can we do it by DISM?

Hi,
If the above method doesn't work, you can try pre-configuring sidebar gadgets using unattend.xml, which can be used to override Sidebar default settings.
To disable Windows sidebar gadgets when windows load, you can configure this following in your unattend.xml.
<unattend xmlns="urn:schemas-microsoft-com:unattend" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Sidebar" publicKeyToken="31bf3856ad364e35" language="neutral"
versionScope="nonSxS" processorArchitecture="x86">
<SidebarOnByDefault>false</SidebarOnByDefault>
</component>
</settings>
</unattend>
For detailed information, you can refer to
http://blogs.msdn.com/b/sidebar/archive/2007/03/08/pre-configuration-of-sidebar-gadgets-using-unattend-xml.aspx
Or try customize windows using sysprep tool
http://www.sevenforums.com/tutorials/286053-system-preparation-tool-use-customize-windows.html
Andy Altmann
TechNet Community Support

Urgent: How to exclude a particular value from the selection in the infopac

How to exclude a particular value from the selection in the infopackage.
Ex: not load for cost center 10000
Thank you,
sam

Hi Sam,
You cannot do this directly as exclusion, but you can include all other values, even as ranges and thus exclude the particular value, else you can also try to do this by writing a routine.
Hope this helps...

How to delete 100+ released requests from the import queue?

Hello
How to delete 100+ released requests from the import queue?
One by one or there is more convinient way?
Thanks

To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
1) Highlight the status field of the import queue.
2) Sort the import queue by the status.
3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
5) Go to menu option Request > Delete.
If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

How to delete a specific request from ODS

Hi all,
We have an ODS which we're loading invoices from legacy system. In legacy system, there are two tables for invoices. First one is daily records which is archived on last day of each month. As you guess, second table is for archive records. We need all of the records from both tables. Because of performance issue , we don't want to load both tables everyday . So we created two transformation. Since there is no delta option, we need to delete the first table request from data targets before extraction. And delete the request from the second table only last day of month. We're created process chain. But there is no option for deleting only the request from a specific data source or transformation. Are there any solution for this?
thanks,
Yigit

Hi,
Thanks for your code. But is there any function module to delete most recent request from the ODS.
I had 2 requirements...One in need to delete from ODS & Other one from Cube.
FM - 'RSSM_DELETE_REQUEST' will be used to delete from Cube only.
Can please you send FM & ABAP Code to delete request from ODS.
Thanks in advance.
Yigit
Message was edited by:
Yigit

HT1414 how do I restore my phone from a previous date?

How do I restore my Iphone from a previous date. When I sync it says data is corrupted and need to back up from a prior date. I synch thru computer vs Icloud.

Read http://support.apple.com/kb/HT1766

How to Schedule a particular request from Datasource to Data Target

Similar Messages

Maybe you are looking for