How to push a perticular request from PSA to Data target using DTP in BI

Hello all.
I have mulitple requests in PSA & wanted to move only perticular requests (Randomly, say first request & last request ) to data target using DTP in BI 7.0. How can we do this.. ? Is there any option in DTP (BI 7.0)for selective loading of requests from PSA to Data Target..
Thanks in advance..
Cheers,
sami.

Hi,
It is possible by using 'zero fetch' in DTP
If you want only the recent req to be loaded.
1. In PSA, change the status of the recent request to red
2. Do a zero fetch
that is processing mode - No data transfer; delta status in source: fetched
With this processing mode you execute a delta without transferring data.
3. change the particular request status back to green
4. Run a delta load
Regards,
Priya.D

Similar Messages

How to Schedule a particular request from Datasource to Data Target

Hi Freinds,
I have loaded x no of requests of flat file sources to the data source(p.s.a) , But i am unable to load particular request no to the data targert(incube) throgh D.T.P.
Thanks & Regards
P.vishwam

Hello,
You may try the this option.
Right click on the datasource -> Manage. Now you can see all the PSA requests. Now, click on the traffic light button of all the requests except the request that you want to load, and set their status in to red.
Now if you run the DTP, it will pick only the green one. After the DTP is completed, you can change back those red requests into Green status.
Hope this helps.
Regards,
Bijesh

Updating data from PSA to Data Target

Hi,
I just want to update data from PSA to data target.
There is a process chain running daily it will updating Master Data in to 0Vendor object. This process chain is updating only upto PSA not the data target. I just want to update from PSA to data target.
There is a update rule for 0Vendor but itu2019s not active at the movement and also it is not properly mapped with the 0Vendor.
Is there any other method which I can update data from PSA to Data target with in the same process chain.
Thanks
Ganesh

If this is BW 3.5, change the infopackage setting to load to data target as well.
This is a other w ay than using the update from infopackage.
if this is 7.0, Use the DTP to load from PSA(datasource) to Target.
Let me know if this helps.
Thanks
Sachin

How to load a selective request from PSA to DSO using DTP?

Hi Gurus,
The PSA is having 3 requests, how to load the request number 2 from psa to DSO using DTP?
Thanks
SDP
Edited by: SDPSAP on Nov 15, 2011 7:58 PM

Let us say that requests are 1,2 and 3. 1 being the first one and 3 is the last one. Now you need to load request 2 in DSO from PSA.
- create a Delta DTP
- Tick "Only Get Delta Once"
- Tick "Get One Request Only"
- Untick "Reterive Until No More New Data"
- execute the DTP, it will load request 1 to DSO
- delete this request from DTP
- execute DTP again, it will load request 2 to DSO; this is what you need.
If DSO is write optimized, you do not need to untick "Reterive Until no More New Data"; just execute the DTP, it will create 3 requests in DSO, delete first and last and you will get only 2 in DSO.
I hope it helps.
Regards,
Gaurav

How to push the data from PSA to Data Target in 3.5 version

Hi Experts,
I'm currently working on BI 7. I have some master data load being maintained in 3.5 version.
The infopackage has an option to load the data to psa and data target when extracted.
I want to stage the data at PSA only.
Later I want to trigger it to the target.
In 7 version we use DTP but I'm not very sure what should I do here.
Can anyone please help me to push the data to the target please using 3.5 version.
Thanks

Hi pathak,
Thanks for your reply. I'm able to do it.
Can you please tell me how do I filter the load to target.
We have filter in DTP where i can restrict the load.
Do we have any option in 3.5.
Please advice.
Thanks

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Data not updating from psa into Data Targets

Hiii,
We have started data upload in info cubes from psa . The number of records was 4 in psa . But after waiting for at least 3 hours ,still the data is not updated in info cube . The data which we want to upload in info cube (of stock) is of past date which due to some reason failed to update in BI from ECC . To upload the same that is data of past date we have deleted the setup table in ECC and then after filling the data again in set up tables, created a new info package from which uploaded data in PSA . But while trying to upload data in info cubes,it is not getting updated and the request status is showing still green yellow in psa.
Please suggest how to resolve this issue.
Thanks and regards

Are you loading material movements from 2LIS_03_BF in to cube? If so, please look at the below link for inventory data loads.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?QuickLink=index&overridelayout=true
Regards,
JB

Data loading of 0vendor from PSA to Data Target(info object)

Dear Friends
Here I have one problem that..i have loaded the master data 0vendor data is coming upto PSA but not going to data target i.e info object .
Here I am giving the system message in RSMO (status tab)
<b>Processing in Warehouse timed out; processing steps missing
Diagnosis
Processing the request in the BW system is taking a long time and the processing step has still not been executed.
System response
<DS:DE.RSCALLER>Caller is still missing.
Procedure
Check in the process overview in the BW system whether processes are running in the BW system under the background user.
If this is not the case, check the short dump overview in the BW system.</b>
Yesterday also I got this error is it concerned to BASIS guy or have to do in BW.
I remind you this is daily job .
Thanks and Regards
Rajasekar

Hi Manfred
Thanks for you response..
i checked in ST22 i didnt find short dump and in RSMO i find <b>transfer(Idocs and trfc):Errors occured,
Data Package 1 : arrived in BW ; Processing : Data packet not yet processed</b> in details tab..i have activated transfer rules also..data is available in PSA..in infopackage tab i have selected full update
and in Processing tab:i find
Data Package 1 ( 11442 Records ) : Errors occurred
also showing transfer rules with red button.
so if u give any solution for above problem i will be highly thankful to you
Thanks and Regards
Rajasekar

Pushing a request from PSA..but says.."Request is already updated in cube"

Guys,
Pushing a request from PSA..but says.."Request is already updated in cube". I have deleted before scheduling from psa...i could see the request in yellow/not yet completed list.
I am couldnt find the request in the cube...but while pushing from psa it says"request already updated".
Pls Advice,,,Thanks!

Ganesh,
Goto Infocube Manage --> Reconstruction Tab --> select request --> Reconstruct and try..
Hope it Helps
Srini

How to submit a concurrent request from Discoverer report.

I would like to know If any one has tried submitting a concurrent request from Discoverer Report?_
This is no stupid question, but our team here finally decided with a solution to our long pending issues with few of the discoverer report. To Proceed further, we would like to know, how to submit a concurrent request from Discoverer report?
We are looking for calling a package from the Disco admin by passing the parameters from the disco to the 6i report.
All help us in this regards are much appreciated.
Kindly help us in the same!
Thanks
Arun

Thanks Rod for confirming the same.
I will be trying the same today and will let you know if I succeed in doing it.
If I can share the actual requirement with you, it goes like this.
"I will be triggering the Oracle 6i standard AP Trail balance report through the Disco report. The standard report will be inserting the required data to one of my custom table. Once the concurrent program completes normal, my custom table will be having the required data to create the workbook specific to the current run of the concurrent program.
The one problem which I think could happen is, How can I make my disco report to wait till the standard program to complete in normal so that my disco report can be generated with the data from custom table.
Will the above requirement is possible If I follow the way you mention in the PDF or Could you suggest a better way for achieving the same.
In short, my requirement is: The custom table(say XX_TABLE) will be populated with data when the standard 6i report is run and the disco admin will be making of the custom table (XX_TABLE) to generate the report.
Please advice.
Thanks
Arun

How to delete a single request from DSO in BI 7.0

Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
Prathap

IN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk

How to Identify which reuest from PSA has been taken by DTP

Hello BI Experts,
I have a requests lying in the PSA, with a Red Sign, Requested not updated to any data target using DELTA.
When I trigger my DTP i get the records in my DSO. But I could not find the which PSA request has been updated by the DTP.
IS there a Table where we can get this information.
THe Header Tab of the DTP didnt show this info.
Your response will be appreciated greatly and reciprocated with points
Thanks

Hello.
1. Onen "Manage" your DSO (context menu).
2. GoTo requests.
3. Read the number of your request: DTPR_*
4. SE11 - RSSTATMANREQMAP
5. RSSTATMANREQMAP-RNR = DTPR_*
6. In PARENT_RNR you will get the requests list.
7. Open "Manage" of your PSA.
There you can see another requests list.
8. Compsre requests list from 6. and 7.
Find matches.- appropriate PSA requests.
Hope it helps,
Alexander Kuzmich.

How to transfer the http request from applet to servlet/jsp

I use the JTree component to create a navigation of a website,but i don't
know how to connect the tree's nodes with the jsp/servlet.
I mean how to transfer the http request from the applet to a jsp.
I use the "<frameset>" mark which will divide the web browse into 2 blocks.
The left side is Applet,and the right side is the linked jsp page.
what I say is as the weblogic console layout.
who can help me!!!
Thank You!

I use the JTree component to create a navigation of a website,but i don't
know how to connect the tree's nodes with the jsp/servlet.
I mean how to transfer the http request from the applet to a jsp.
I use the "<frameset>" mark which will divide the web browse into 2 blocks.
The left side is Applet,and the right side is the linked jsp page.
what I say is as the weblogic console layout.
who can help me!!!
Thank You!

How to send the transport request from one client to other client?

Hello Friends,
I have generated one transport request in one of the client in Development server.Now as it is customizing request so unless and until i transport it to other client within the same server, Changes will not be visible in other clients.So how to transport this customizing request from one client to other client within the same server.
Thanking you guys in advance.
Regards,
Jitendra

Hi Jitendra,
Release your Transport Request via SE10, then go to STMS & import the request first to your quality server, then to your production server.
Apologies for the incorrect inputs, please use SCC1 as advised by other forum members
Hope the above clarifies your query.
Regards,
Vivek
Edited by: Vivek on Mar 16, 2009 1:05 PM

How to delete 100+ released requests from the import queue?

Hello
How to delete 100+ released requests from the import queue?
One by one or there is more convinient way?
Thanks

To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
1) Highlight the status field of the import queue.
2) Sort the import queue by the status.
3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
5) Go to menu option Request > Delete.
If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

How to push a perticular request from PSA to Data target using DTP in BI

Similar Messages

Maybe you are looking for