How to schedule a sql query on Windows

Hi Experts;
I got a sql query that I need to put on schedule, (on windows) in order it runs everyday at specific time.
I got the query, but I want to know the next:
How to invoke SQLPlus from this query? Explain how to include the user/password@SID
Do I need to create this query in a .bat file?
Also I want to know, how to send the results to an email?
Thanks for your help.
Regards
Al

I would suggest to put your sql query to a separate file and spool the result to a concrete file:
query.sql:
spool query.lst
select * from emp;
spool off;create a bat file query.bat:
sqlplus <connection> @query.sql
...work with content of query.lst, send mail etcThen schedule your bat file with Windows scheduler
The above could be simplified with JavaScript or VBScript
Thanks.

Similar Messages

How to get physical SQL query

Hi All,
How to get the physical SQL query for the OBIEE reports.
Thanks in advance,
Haree.

Hi Anitha,
Thanks for your reply,
I am getting XML script in log file. (Settings > Administration > Manage Sessions > View Log).
How to get physical SQL query ?
Thanks,
Haree

How to tune past SQL query??

Hi Team,
Straight to issue --> I am seeing an query running for long time. When i begun to trace that particular query it got over by the time and now how to trace that specific SID and QUERY..
I am working on 10.2.0.4 version DB..
How to trace an sql query after its execution?? pls provide steps how to begin with..
regards
dkoracle

dkoracle wrote:
Hi Team,
Straight to issue --> I am seeing an query running for long time. When i begun to trace that particular query it got over by the time and now how to trace that specific SID and QUERY..
I am working on 10.2.0.4 version DB..
How to trace an sql query after its execution?? pls provide steps how to begin with..Can not be done.
ALTER SESSION SET SQL_TRACE=TRUE;
-- run query again

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to write a SQL query in SAP B1 2007 B with input parameters?

How to write a SQL query in SAP B1 2007 B with input parameters, on execution of which will ask for some input value from the user and the values will be selected from a list such as item list?

The syntax like
SELECT * FROM OITM T0 WHERE T0.ItemCode = '[%0\]'
Thanks,
Gordon

How to execute an SQL query present in a string inside an ABAP program?

hello,
How to execute an SQL query present in a string inside an ABAP program

Raut,
You can execute Native SQl statements.
Ex: To use a Native SQL statement, you must precede it with the EXEC SQL statement, and follow it with the ENDEXEC statement as follows:
EXEC SQL [PERFORMING <form>].
<Native SQL statement>
ENDEXEC.
There is no period after Native SQL statements. Furthermore, using inverted commas (") or an asterisk (*) at the beginning of a line in a native SQL statement does not introduce a comment as it would in normal ABAP syntax. You need to know whether table and field names are case-sensitive in your chosen database.
In Native SQL statements, the data is transported between the database table and the ABAP program using host variables. These are declared in the ABAP program, and preceded in the Native SQL statement by a colon (:). You can use elementary structures as host variables. Exceptionally, structures in an INTO clause are treated as though all of their fields were listed individually.
If the selection in a Native SQL SELECT statement is a table, you can pass it to ABAP line by line using the PERFORMING addition. The program calls a subroutine <form> for each line read. You can process the data further within the subroutine.
As in Open SQL, after the ENDEXEC statement, SY-DBCNT contains the number of lines processed. In nearly all cases, SY-SUBRC contains the value 0 after the ENDEXEC statement. Cursor operations form an exception: After FETCH, SY-SUBRC is 4 if no more records could be read. This also applies when you read a result set using EXEC SQL PERFORMING.
EXEC SQL PERFORMING loop_output.
SELECT connid, cityfrom, cityto
INTO :wa
FROM spfli
WHERE carrid = :c1
ENDEXEC.
Pls. Mark If useful

How to execute this SQL Query in ABAP Program.

Hi,
I have a string which is the SQL Query.
How to execute this sql Query (SQL_STR) in ABAP Program.
Code:-
DATA: SQL_STR type string.
SQL_STR = 'select * from spfli.'.
Thanks in Advance,
Vinay

Hi Vinay
Here is a sample to dynamically generate a subroutine-pool having your SQL and calling it.
REPORT dynamic_sql_example .
DATA: BEGIN OF gt_itab OCCURS 1 ,
line(80) TYPE c ,
END OF gt_itab .
DATA gt_restab TYPE .... .
DATA gv_name(30) TYPE c .
DATA gv_err(120) TYPE c .
START-OF-SELECTION .
gt_itab-line = 'REPORT generated_sql .' .
APPEND gt_itab .
gt_itab-line = 'FORM exec_sql CHANGING et_table . ' .
APPEND gt_itab .
gt_itab-line = SQL_STR .
APPEND gt_itab .
gt_itab-line = 'ENDFORM.' .
APPEND gt_itab .
GENERATE SUBROUTINE POOL gt_itab NAME gv_name MESSAGE gv_err .
PERFORM exec_sql IN PROGRAM (gv_name) CHANGING gt_restab
IF FOUND .
WRITE:/ gv_err .
LOOP AT gt_result .
WRITE:/ .... .
ENDLOOP .
*--Serdar

How Can I find SQL Query in Database

Dear Experts,
How Can I find SQL Query in Database.

Hi,
U mena what query got executed in db? u can try V$SQL for it.
Regards
Bharath

How to determine a sql query size to display a progress bar

I would like to show a progress of an sql query within a jsp page.
Background:
I have a reporting web application, where over 500 contacts can run reports based on different criteria such as date range....
I current display a message stating 'executng query please wait', however the users (hate users) do not seem to wait, thereofore they decide to run the query all over again which affected my reportign sever query size (eventually this crashes, stopping all reports)
Problem:
The progress bar is not a problem, how would I determine the size of the query at runtime therefore adding the time onto my progress bar.

Yes it's doable (we do it) but it sure ain't easy.
We've got about 23,500,000 features (and counting) in a geodata database. Precise spatial selection algorithms are expensive. Really expensive.
We cannot impose arbitrary limits on search criteria. If the client requires the whole database we are contractually obligated to provide it...
For online searches We use statistics to approximate the number of features which a given query is likely to return... more or less the same way that the query optimiser behind any half decent (not mysql (5 alteast)) database management system does.
We have a batch job which records how many features are linked to each distinct value of each search criteria... we just do the calculations (presuming a normal (flat) distribution) and...
... if the answer is more than a 100,000 we inform the user that the request must be "batched", and give them a form to fill out confirming there contact details. We run the extract overnight and send the user an email containing a link which allows them to download the result the next morning.
... if the answer is more than a million features we inform the user that the request must batched over the weekend... same deal as above, except we do it over the weekend to (a) discourage this; and (b) the official version ensure we have enough time to run the extract without impinging upon the maintenance window.
... if the answer is more than 5 million we display our brilliant "subscribe to our DVD service to get the latest version of the whole shebang every three months (or so), so you can kill your own blooody server with these ridiculous searches" form.
Edited by: corlettk on Dec 5, 2007 11:12 AM

How to construct a sql query when field having single quote

Hi all,
I have been working on web application , here is my requirement:
I'm constructing sql statement dynamically from dynamic user input (form data). In one of the field having single quote.
while executing the query it is getting problem because of single quote .. so how do i resolve my problem.
single quote should be there. (I'm using Ms-Access as my database).
Thanks in advance
abel

Use PreparedStatement. Always. It not only eases setting Java objects in a SQL query, but also protects you against SQL injections.
Prepare yourself: [http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html].

How to write a sql query to retrieve data entered in the past 2 weeks

Hi,
I have file names and last accessed date(java.sql.Date format) stored in my database table, I would like to know how I can write a query to get the name of files accessed in the past 2 weeks,I use open sql server at the back end.
Thanks in advance.

This has essentially nothing to do with JDBC. JDBC is just an API to execute the SQL language using Java and thus interact with the databases.
Your problem is related to the SQL language, you don't know how to write the SQL language. I suggest you to go through a SQL tutorial (there is one at w3schools.com) and to read the SQL documentation which come along with the database in question. A decent database manfacturer has a website and probably also a discussion forum / mailinglist as well.
I'll give you a hint: you can just use equality operators in SQL like everywhere. For example: "WHERE date < somedate".

How to run a sql query from a button in apex 3.0

Hi,
I am brand new and went through/installed the obe project tracker. I have need to create a simple application that displays a result (2 fields, name and license number) based on two parameters (dob and login id) which all are stored in 1 table in the database. I could this very simply in VB or VB.net but have no idea how to do it in apex.
Please provide guidance,
Thank you,
Tom

Hi Tom,
Sounds like a report region will satisfy your requirements.
Create a new report region on one of your pages.
Choose SQL Report and give the region a title.
When you get to the "Enter SQL Query or PL/SQL function returning a SQL Query:" step, type:
SELECT name, license_number
FROM <insert_your_table_name_here>
WHERE dob = :P<n>_dob
AND login_id = :P<n>loginid(replace <n> with the page number that the region is on and use your own table name).
Don't try to run the page yet - it will give 'No data found'
Now, go back to the Page Definition screen and add two items in the region you just created - call them P<n>dob and P<n>login_id
Then, create a button in the same region (to be displayed amongst the region's items) - call it P<n>_GO and click 'Create' (take all the other defaults).
Now you can run the page, put some values into the fields and click go.
If you want to get fancier, you can change the text items to select lists etc. - let us know if you need help with that.
Hope this helps,
Bryan.

How to execute a SQL Query in Ms-Access

Hi,
I've a query which fetches the data from the tables based on daily transactions.
I mean, the data gets updated daily basis.
Now, i want to send the user a Ms-access work sheet with the query written, so that when ever the query is executed, it would fetch the records (with latest updates).
I found some documents in google to, how to write sql query in ms-access.
How ever, i'm unable to find the connection setup.
how do i connect to oracle database using ms-access??
Can any one please help me regarding this.
Thanks,
Santhosh

You can try this tutorials
http://www.reo.gov/gis/tools/infobase/LinkAccessToOracle.pdf
Basically steps include,
Install and configure Oracle client
Configure ODBC DSN using correct TNS name configured in first step
Link the table from Msaccess, make sure you linked the table not import it.

How To Write A Sql Query to Show 0's

I never can remember this :-/ What do I have to do to get a SQL Query to return 0 if the Count of a condition is 0? For example lets say Joe, Jay, Jim could log on, but only Joe & Jim logged in Jay would not be returned in the query below. What
would I need to set-up so that All 3 users would be returned
Select logonName, Count(Logon)
From logonUserInfo
where logonName is not nullGROUP BY logonName

Currently there is only 1 table involved. I would need a separate table? What would this table need to hold?
You wouldn't need a separate table unless and until you want to store who logged in at what time and so on... then your table structures looks like below..
CREATE TABLE loginnames
loginid INT
name VARCHAR(30),
GO
CREATE TABLE loginTimes
loginid INT,
logintime DATETIME
GO
So, now you can do a left join on both tables on a certain date directly and find out who actually logined and who didn't with a count 0 for the one's who didn't login... and that will abide the principles of normalization as well...
If you don't want to use an another table, you would have to duplicate the loginnames everytime that user logins and also you don't have a track on what date the login happened.. So you will be considering from day 1 to Till date...
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

How to execute a sql query in VO????

Hi every body.
Can you show me the way to execute a sql query in VO.
For example: I have a viewobject1, and I add a new method void execSQL() before the last '}' of the java file of viewobject1 like this:
public void execSQL() {
String strSql = "Select sysdate from dual";
I want to execute strSql query and return a Resultset, how can I perform ???
Thanks a lot.

The executeQuery method in ViewObjectImpl does not return a ResultSet.
ViewObjectImpl voImpl;
voImpl.setQuery(strSql);
voImpl.executeQuery();

How to schedule a sql query on Windows

Similar Messages

Maybe you are looking for