How to see ALV in background

Hi I run a alv report in background.
I see it in a report format, i want to see it in a alv format.
Kindly help

Hi SK ,
If use Grid in BG u will get o/p In ALV List Itself, second thing is u will get Croped o/p bcos of Print Format 65255 , in this case u have to create/change a new Print Format only for BG jobs like 651000.
for more info ask ur basis person to create a new print formats in such cases.
Regards
Prabhu

Similar Messages

My iTunes 11.0 (mac) has a black background colour and I can not see all of the information. How do I change the background colour in iTunes 11.0 (mac)

My iTunes 11.0 (mac) has a black background colour and I can not see all of the information for each song. How do I change the background colour in iTunes 11.0 (mac) so I can see check boxes etc. My download window shows no information, it is entirely black.

Trent o
Someone else in the forum told me how to do this. If you have Onyx on your system then select Parameters, iTunes and turn off high contrast mode. If you don't have Onyx, I'd suggest getting it. It is freeware and used to help maintain your system. Good luck
Paul

Here's how to do ALV (OO) with dynamic fcat, int table and editable data

Hi everybody
Here's a more useful approach to ALV grid with OO using dynamic table, data NOT from DDIC, dynamic FCAT and how to get changed lines from the grid when ENTER key is pressed.
It's really not too dificult but I think this is more useful than the ever present SFLIGHT methods from the demos.
This also defines a subclass of cl_gui_alv_grid so you can access the protected attributes / methods of that class.
You don't need to add the class via SE24 -- done fron this ABAP.
When you run it click Edit for the first time.
After editing data press ENTER and the break point should bring you into the relevant method.
Code developed on NW2004S trial version but also works on rel 6.40 on a "Real" system.
The code should work without any changes on any system >=6.40.
All you need to do is to create a blank screen 100 via SE51 with a custom container on it called CCONTAINER1.
The rest of the code can just be uploaded into your system using the SE38 upload facility.
When running the program click on the EDIT button to enable the edit functionality of the grid.
Change your data and when you press ENTER you should get the break-point where you can see the original table and changed rows.
This program is actually quite general as it covers Dynamic tables, building a dynamic fcat where your table fields are NOT in the DDIC, intercepting the ENTER key via using an event, and accessing the protected attributes of the cl_gui_alv_grid by defining a subclass of this class in the abap.
I've seen various questions relating to all these functions but none in my view ever answers the questions in a simple manner. I hope this simple program will answer all these and show how using OO ALV is actually quite easy and people shouldn't be scared of using OO.
Have fun and award points if useful.
Cheers
Jimbo.
<b>PROGRAM zdynfieldcat.
Simple test of dynamic ITAB with user defined (not ddic) fields
Build dynamic fcat
use ALV grid to display and edit.
*When edit mode set to 1 toolbar gives possibility of adding and
*deleting rows.
*Define subclass of cl_gui_alv_grid so we can use protected attributes
*and methods.
Add event handler to intercept user entering data and pressing the
*ENTER key.
When enter key is pressed get actual value of NEW table (all rows)
rather than just the changed data.
*use new RTTI functionality to retrieve internal table structure
*details.
Create a blank screen 100 with a custom container called CCONTAINER1.
James Hawthorne
include <icon>.
define any old internal structure NOT in DDIC
types: begin of s_elements,
       anyfield1(20) type c,
       anyfield2(20) type c,
       anyfield3(20) type c,
       anyfield4(20) type c,
       anyfield5(11) type n,
       end of s_elements.
types: lt_rows type lvc_t_roid.
Note new RTTI functionality allows field detail retrieval
at runtime for dynamic tables.
data:   wa_element type s_elements ,
        wa_data type s_elements,
        c_index type sy-index,
        c_dec2 type s_elements-anyfield5,
        wa_it_fldcat type lvc_s_fcat,
        it_fldcat type lvc_t_fcat,
        lr_rtti_struc TYPE REF TO cl_abap_structdescr,    "RTTI
        lt_comp TYPE cl_abap_structdescr=>component_table,"RTTI
        ls_comp LIKE LINE OF lt_comp,                     "RTTI
        zog like line of lr_rtti_struc->components,      "RTTI
        struct_grid_lset type lvc_s_layo,
        l_valid type c,
        new_table type ref to data.
field-symbols: <dyn_table> type standard table,
               <actual_tab> type standard table,
               <fs1> type ANY,
               <FS2> TYPE TABLE.
data: grid_container1 type ref to cl_gui_custom_container.
class lcl_grid_event_receiver definition deferred.
data: g_event_receiver type ref to lcl_grid_event_receiver.
data: ls_modcell type LVC_S_MODI,
      stab type ref to data,
      sdog type s_elements.      .
class lcl_grid_event_receiver definition.
public section.
    methods:
    handle_data_changed
         for event data_changed of cl_gui_alv_grid
             importing er_data_changed,
       toolbar for event toolbar of cl_gui_alv_grid
                 importing e_object
                           e_interactive,
      user_command for event user_command of cl_gui_alv_grid
                 importing e_ucomm.
endclass.
*implementation of Grid event-handler class
class lcl_grid_event_receiver implementation.
method handle_data_changed.
code whatever required after data entry.
various possibilites here as you can get back Cell(s) changed
columns or the entire updated table.
Data validation is also possible here.
perform check_data using er_data_changed.
endmethod.
Method for handling all creation/modification calls to the toolbar
method toolbar.
    data : ls_toolbar type stb_button.
Define Custom Button in the toolbar
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EDIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Edit' to ls_toolbar-text.
    move icon_change_text to ls_toolbar-icon.
    move 'Click2Edit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'UPDA' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Update' to ls_toolbar-text.
    move icon_system_save to ls_toolbar-icon.
    move 'Click2Update' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EXIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Exit' to ls_toolbar-text.
    move icon_system_end to ls_toolbar-icon.
    move 'Click2Exit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
endmethod.
method user_command.
    case e_ucomm .
      when 'EDIT'.          "From Tool bar
        perform set_input.
         perform init_grid.
      when 'UPDA'.          "From Tool bar
        perform refresh_disp.
        perform update_table.
      when 'EXIT'.          "From Tool bar
        leave program.
    endcase.
endmethod.
endclass.
class zcltest definition inheriting from cl_gui_alv_grid.
define this as a subclass so we can access the protected attributes
of the superclass cl_gui_alv_grid
public section.
methods: constructor, disp_tab.
endclass.
need this now to instantiate object
as we are using subclass rather than the main cl_gui_alv_grid.
class zcltest implementation.
METHOD constructor.
CALL METHOD super->constructor
        exporting i_appl_events = 'X'
           i_parent = grid_container1.
endmethod.
method disp_tab.
FIELD-SYMBOLS: <outtab> TYPE STANDARD TABLE.
break-point 1.
mt_outtab is the data table held as a protected attribute
in class cl_gui_alv_grid.
ASSIGN me->mt_outtab->* TO <outtab>. "Original data
do whatever you want with <outtab>
contains data BEFORE changes each time.
Note that NEW (Changed) table has been obtained already by
call to form check_data USING P_ER_DATA_CHANGED
         TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Entered data is in table defined by <fs2>
In this method you can compare original and changed data.
Easier than messing around with individual cells.
do what you want with data in <fs2> validate / update / merge etc
endmethod.
endclass.
data :
    ok_code like sy-ucomm,
    save_ok like sy-ucomm,
    i4 type int4,
Container Object [grid_container]
now created via method constructor
in the subclass zcltest.
Control Object [grid]
grid1 type ref to zcltest,
Event-Handler Object [grid_handler]
grid_handler type ref to lcl_grid_event_receiver.
start-of-selection.
call screen 100.
module status_0100 output.
now display it as grid
if grid_container1 is initial.
    create object grid_container1
        exporting
          container_name = 'CCONTAINER1'.
    create object grid1.
     break-point 1.
    create object grid_handler.
    set handler:
       grid_handler->user_command for grid1,
       grid_handler->toolbar for grid1,
       grid_handler->handle_data_changed for grid1.
perform create_dynamic_fcat.
perform create_dynamic_itab.
perform populate_dynamic_itab.
perform init_grid.
perform register_enter_event.
set off ready for input initially
i4 = 0.
call method grid1->set_ready_for_input
         exporting
           i_ready_for_input = i4.
endif.
endmodule.
module user_command_0100 input.
*PAI not needed in OO ALV anymore as User Commands are handled as events
*in method user_command.
*we can also get control if the Data entered and the ENTER is pressed by
*raising an event.
Control then returns to method handle_data_changed.
endmodule.
form create_dynamic_fcat.
get structure of our user table for building field catalog
Use the RTTI functionality
lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data( wa_data ).
Build field catalog just use basic data here
colour specific columns as well
loop at lr_rtti_struc->components into zog.
c_index = c_index + 1.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = zog-name .
wa_it_fldcat-datatype = zog-type_kind.
wa_it_fldcat-inttype =   zog-type_kind.
wa_it_fldcat-intlen =    zog-length.
wa_it_fldcat-decimals = zog-decimals.
wa_it_fldcat-lowercase = 'X'.
if c_index eq 2.
wa_it_fldcat-emphasize = 'C411'.
     endif.
    if c_index eq 3.
wa_it_fldcat-emphasize = 'C511'.
   endif.
append wa_it_fldcat to it_fldcat .
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to field sysmbol.
Use dynamic field catalog just built.
call method cl_alv_table_create=>create_dynamic_table
             exporting
                it_fieldcatalog = it_fldcat
             importing
                ep_table        = new_table.
assign new_table->* to <dyn_table>.
endform.
form populate_dynamic_itab.
load up a line of the dynamic table
c_dec2 = c_dec2 + 11.
wa_element-anyfield1 = 'Tabbies'.
wa_element-anyfield2 = 'ger.shepards'.
wa_element-anyfield3 = 'White mice'.
wa_element-anyfield4 = 'Any old text'.
wa_element-anyfield5 = c_dec2.
append wa_element to <dyn_table>.
endform.
form check_data USING P_ER_DATA_CHANGED
           TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Get altered data back
ASSIGN   p_er_data_changed->mp_mod_rows TO <FS1>.
stab =       p_er_data_changed->mp_mod_rows.
ASSIGN STAB->* TO <FS2>.
LOOP AT <FS2> INTO sdog.
ALV grid display with altered data is now in <fs2>.
do any extra processing you want here
endloop.
now display new table
call method grid1->disp_tab.
endform.
form exit_program.
call method grid_container1->free.
call method cl_gui_cfw=>flush.
leave program.
endform.
form refresh_disp.
call method grid1->refresh_table_display.
endform.
form update_table.
The dynamic table here is the changed table read from the grid
after user has changed it
Data can be saved to DB or whatever.
loop at <dyn_table> into wa_element.
do what you want with the data here
endloop.
switch off edit mode again for next function
i4 = 0.
call method grid1->set_ready_for_input
      exporting
          i_ready_for_input = i4.
endform.
form set_input.
i4 = 1.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form switch_input.
if i4 = 1.
i4 = 0.
else.
i4 = 1.
endif.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form init_grid.
Enabling the grid to edit mode,
     struct_grid_lset-edit = 'X'. "To enable editing in ALV
     struct_grid_lset-grid_title = 'Jimbos Test'.
     call method grid1->set_table_for_first_display
       exporting
         is_layout           = struct_grid_lset
       changing
         it_outtab             = <dyn_table>
         it_fieldcatalog       = it_fldcat.
endform.
form register_enter_event.
call method grid1->register_edit_event
               exporting
                  i_event_id = cl_gui_alv_grid=>mc_evt_enter.
Instantiate the event or it won't work.
create object g_event_receiver.
set handler g_event_receiver->handle_data_changed for grid1.
endform.</b>

Hi there
IE7 doesn't give me the add new page option and I get 404 error when trying to access the "How to contribute" section.
I'll load up Firefox later (this browser usually works when IE7 doesn't always work properly).
I'll copy the stuff to the wiki when I've got the browser sorted out.
Cheers
jimbp

How to see the Open PO Qty in Mass

Dear Experts,
How to see the Open Qty in PO in mass, is there any report available..Please help
Regards
karthik

use the Txn ME2N
Enter the follwoing details . Scope of list - ALV, Selection parameters- WE101, Plant- XXXX, Enter the document dates From and TO and execute ( F8), You will get all the details, If you want to adjust the format use cntrl+F8 to get the POP_up for selection of fields and use as you wish.

How do I turn off background ni file activity when not using Labview? files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, nicitdl5.exe

How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
Can this be done or do I have to remove labview from the system to improve performance?
Thanks

Hello, those processes are part of running NI services that start when Windows boots. These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products. These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity. That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources. If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services. Right click the process go to Properties and Under the General tab choose Startup Type»Manual. This will start up the processes only when something directly starts it up. LabVIEW will start these processes up as it attempts to use them. When you shut down LabVIEW you will need to manually shut down these processes through task manager. Again, doing this can cause problems with your NI products on your system and it is not advised.
Travis M
LabVIEW R&D
National Instruments

How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.

How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.
As an example, html widget has white background on iPad, and black on mac. The same goes for interactive widget.
The MathType text inserted is inserted as a image, and will have the same color when in fullscreen as when not. So I need the textcolor to be the same in both views. Anyone know how to fix this?

We're still not communicating. This is why I wanted an example .iba.
Here's a re-creation of my own, going off what you described. You said "all html widgets and all gallery widgets" have this problem. So I inserted a blank HTML widget and a blank Gallery widget, and typed into both. Inserted a MathType equation into both. I don't see any difference when I preview it on my Mac compared to the preview on the iPad. I want to help, but I can't help if I can't duplicate the issue.
I've attached the screen shots and the .iba file [link to .iba file].
Feel free to email me directly at bobm at dessci dot com. If you're uncomfortable giving some information here, tell me anything you want in email. I work for the "MathType company", Design Science.

How can I change the background color in the inbox?

The background color in my inbox (well, all mailboxes) is white. A yellow background would make the existing black text a lot easier to read. How can I change the background color in the inbox?

Themes work in Thunderbird - duggabe was not refering to Firefox.
Another useful addon is theme and font changer:
* https://addons.mozilla.org/fr/thunderbird/addon/theme-font-size-changer/
However, Thunderbird allows you to modify all sorts of things.
Make hidden files and folders visible:
* http://kb.mozillazine.org/Show_hidden_files_and_folders
Help > Troubleshooting Information
Click on 'show Folder' button
a window opens shwoing profile folder name
Close Thunderbird now - this is important
In the profile name folder, Create a new folder called '''chrome''' - note the spelling
It should be in the same place as the 'Mail' folder.
see first image below.
Open Notepad
Can be located : Start > Programs > accessories
Copy everything shown between the lines below.
Paste into Notepad.
Save as '''userChrome.css''' - note the spelling (edit updated - this was a typo error)
This should be saved in the '''chrome''' folder.
see second image below.
Restart Thunderbird.
I have chosen a yellow for you
<pre>
#f6f58c = a yellow....it is a hex code for a colour.
</pre>
You can change it if required. Remember when updating anything in the profile folders, you must close Thunderbird first.
More info on colours.
* http://www.yourhtmlsource.com/stylesheets/namedcolours.html
<pre>
* Do not remove the @namespace line -- it's required for correct functioning
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
/*Background colour for message list*/
#threadTree > treechildren::-moz-tree-row {
background-color: #f6f58c !important;
</pre>
-------------------------------------------

How To Create A Website Background Video In Adobe Edge ?

Hello,
I have video file in my computer SSD drive and i want it to play as background on my web page (page that i am creating).I did try to follow this video:
How To Create A Website Background Video In Adobe Edge Animate Using Edgehero - YouTube
but i cant follow 100% what he is doing.
Guide that i did try to follow is at this link: How To Create A Website Background Video In Adobe Edge Animate Using Edgehero - YouTube
Steps i do in Adobe Edge Animate CC
1.) Create New
2.) i click + sign under section Library >> Scripts >> Add JS File from URL...
URL that i am adding is: http://www.edgehero.com/edgehero.js/1.2/edgehero_1.2_min.js (URL is taken from site: Edgehero.js )
I add this link: http://www.edgehero.com/edgehero.js/1.2/edgehero_1.2_min.js to box that occures after i click on Add JS File from URL
3.) I go to Edgehero.js and from there i scrol down to section named as Media - Html5 video / Html5 audio
and i select from there this:
there is a code:
// this will set the video as background of the div/rectangle
backgroundvideo_1 ='movie.mp4';
// put new edgehero.js variables here
4.) I go to Adobe Edge Animate CC 2014 and right click on project and select Open Actions for "Stage"
and then i click on + sign and select creationComplete
This will open Stage window
there i will copy this code:
// this will set the video as background of the div/rectangle
backgroundvideo_1 ='movie.mp4';
// put new edgehero.js variables here
5.) Then i click on ++ sign under library >> Video
and i add video from my computer SSD drive.
Video is named as video3.mp4
Now i eddit the code in Stage window (See above)
code will look after editing like this:
Then i change under left side px to %
6.) Then i copy backgroundvideo_1 from Stage Code:
Then i select Rectangle Tool and mark the area (white box) and i click on small C icon
And the box that occures i type there backgroundvideo_1_mp4 autoplay
now when i use ctrl and enter i only get gray box that does not play video.
What am i doing wrong?

Here is the html file.
Note video file that i try to add is random training video from youtube, And file format is saved using this site:
How do I download and save a YouTube video to my computer?
this is only for testing as i am not gonna put that video on background to my web page. I am only trying to understand how to add video as background.
http://www.filedropper.com/test3_5
http://www.filedropper.com/test3_6
http://www.filedropper.com/test3edge
http://www.filedropper.com/test3edgeactions
http://www.filedropper.com/test3edgepreload
Goal is to create background video like u can see here:
Adobe Muse Tutorial - Responsive Design Hack! by MuseThemes.com - YouTube
Similar possibility is available also in Edge as i understand?

How do I change the background in the Menu bar screen area so that it is lighter and thus more readable?

The background in the area where the Menu bar now sits is jetblack.. When I drag, say, the print icon or cut, paste, save icons to sit to the right of the menu bar, they're there but either I see them only faintly (printer) or I cna't see them only faintly. How can I change the background to a lighter color (it used to be much lighter).

The easiest way might be to install a lightweight theme (formerly known as a persona). You can "shop" for one on the Add-ons site. The following link is for solid colors, but some of the pictorial ones might work, too.
https://addons.mozilla.org/en-US/firefox/themes/solid
You can hover your mouse over the little image tile to see how it would look if you installed it. Can you find one that looks good to you?
Much of Firefox's interface also can be modified with style rules. However, that requires a lot more experimentation, so let's come back to that only if needed.

How can i change my background color in "albums" mode back to black in iTunes 11

how can i change my background color in albums mode back to black in iTunes 11?

Themes work in Thunderbird - duggabe was not refering to Firefox.
Another useful addon is theme and font changer:
* https://addons.mozilla.org/fr/thunderbird/addon/theme-font-size-changer/
However, Thunderbird allows you to modify all sorts of things.
Make hidden files and folders visible:
* http://kb.mozillazine.org/Show_hidden_files_and_folders
Help > Troubleshooting Information
Click on 'show Folder' button
a window opens shwoing profile folder name
Close Thunderbird now - this is important
In the profile name folder, Create a new folder called '''chrome''' - note the spelling
It should be in the same place as the 'Mail' folder.
see first image below.
Open Notepad
Can be located : Start > Programs > accessories
Copy everything shown between the lines below.
Paste into Notepad.
Save as '''userChrome.css''' - note the spelling (edit updated - this was a typo error)
This should be saved in the '''chrome''' folder.
see second image below.
Restart Thunderbird.
I have chosen a yellow for you
<pre>
#f6f58c = a yellow....it is a hex code for a colour.
</pre>
You can change it if required. Remember when updating anything in the profile folders, you must close Thunderbird first.
More info on colours.
* http://www.yourhtmlsource.com/stylesheets/namedcolours.html
<pre>
* Do not remove the @namespace line -- it's required for correct functioning
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
/*Background colour for message list*/
#threadTree > treechildren::-moz-tree-row {
background-color: #f6f58c !important;
</pre>
-------------------------------------------

What is a memory alert and how do I shut down background apps?

What is a memory alert and how do I shut down background apps?

It's when the internal memory doesn't have enough space to operate apps or the phone. You should do two things.
1) Double-tap your Home button. You should see a row of apps at the bottom of the screen. Tap on one and hold down until it wiggles. Hit the red x in the upper right of the icon. Do this for all icons. Don't worry - you're not deleting the Apps, you're just shutting them down from multitasking
2) Do a hard reset of your iPhone. Hold down the Home button and Sleep button. Keep both held down until you see an Apple logo.
This should clear the memory.
Good luck!

How to see the billed invoices in VF04 transaction

Hi,
All
I would like to find a way to see the invoice number for collective billing. When we process more than one Delivery at a time,
The invoice number is generated in background and in order to find it that we have to reference back to the delivery. Is there an place to see this or
how to see the billed invoices in VF04 transaction
Thanks
rajesh

Hi
You may check the table VBRK, give the date of creation of invoice in ERDAT field and execute, it will give all the Invoice created on that date.
you may also check with ref. to the invoive no. in table VBRP for the Delivery no. in the field VGBEL.
If require you may create an ABAP Querry for these two tables VBRK and VBRP.
Hope it will help
Regards
AA

Graphs, how to have a fixed background matrix

I am in the process of developing some code to remotely control some spectrum analyzers. Each system will consist of 4 spectrum analyzers. The customers wants the LabVIEW software to look and function just like the software that runs on their display and control unit. I am enclosing a picture of my X-Control that I created as part of the entire display. The spectrum analyzer indicates that the amplitude, Y-axis, range is 0 - 10,000 measurement units. The length, X-axis, has a range of 3-1024 positions units. The default is 800 position units. I plan on just using the default of 800. I have tried to set the property nodes from within the X-Control and either I am doing something wrong or the minimum, maximum, etc. values can not set within the X-Control.
What the customers wants to see on the background is a 10x10 matrix for the major lines. As you can see in the RFB graph, the lines are set for a 8 horizontal and 5 vertical matrix.
1. How would you advise that I get a 10x10 matrix for the background?
2. Would I need to do a custom control paste my own picture in it?
3. What is the best settings for the maximum, minimum, and sacling factors variables? or any other than you feel should be adjusted.
Thank you for your help.
Bill
Attachments:
graph.JPG ‏64 KB

Take alook at this thread (where Saverio dod all of the work I got all of the thatnks, go figure!). Slam your own image in and you may be good to go.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How do you change the background color not of the video clip, but the background the clip is on?

How do you change the background color upon which the clip resides...
I don't want to change anything within the clip itself, but the matte(?)
from black to white or cream.
I am working with Elements 10...

Create a color matte of the desired color and place it on video track 1. Then place your video on track 2.
from here: Adobe Premiere Elements Help | Creating specialty clips
Create a colored matte for a background
You can create a clip consisting of a full‑frame matte of solid color, which you can use as a solid background for titles or animated clips.
Brightly colored mattes can serve as temporary backgrounds to help you see transparency more clearly while you adjust a key effect.
Click Project Assets.
In the Project Assets panel, click New Item from the panel options and choose Color Matte.
Choose a color in the Adobe Color Picker dialog box, and click OK.
A color matte clip is placed into both the Project Assets panel and the Expert view timeline.

How can i change the background color in the heading when i add a new page

How can I change the background in the heading on a new page? When you add WELCOME page the heading color is tan, the ABOUT ME page the heading is light blue, the PHOTOS page the heading block behind the heading text is light green, etc. How do I change those colors?

you can change iweb navbar any which way you want, as long as you know iweb widgets:
http://iwebwidgets.cyclosaurus.com/iWebNavBar/BkgndColor.html
you won't see the change in iweb, you only see it in published site.

How to see ALV in background

Similar Messages

Maybe you are looking for