How to see the Tabs in Aurora( windows 8 app ) ? I only can see them by oppening a new tab. But In case I want to change tab I can't see them.

I Install Firefox Aurora as it support windows 8 style app. But In the windows 8 mode , the tab are hidden which I think is a good style. But I cant see any option to see them when I want. I just can see them when I open a new window. And select the option "open in the new window", it just show the tab bar which is not like the original version of Firefox. And also the search engine here is bing.com . How to change it.

Where did you see Aurora as a Windows 8 application?
Aurora is not the name of a version but one of the four main development channels. They are Release (26.0), Beta (27.0b9 currently), Aurora (28.0a2) and Nightly (29.0a1). When Firefox 27.0 is released on Feb 4 the versions will move/merge to next channel around time also.
Aurora is not meant for regular use as Aurora and Nightly gets checkins almost everyday and they get a update each of those days.
Also there is a good chance that the Australis that many people dislike will move with 29.0 from Nightly to the Aurora channel next week.
Edit:
Hmm you may have seen older articles like https://blog.mozilla.org/futurereleases/2013/09/21/help-test-a-preview-of-firefox-optimized-for-windows-8-tablets/
At the time of that article, version Firefox 26.0 was being developed early on the Aurora channel.

Similar Messages

E-Rec 6.0: How to increase the tabs on Candidate Profile

Hello,
I'm trying to find out how to increase the tabs that we see on Candidate Profile. In any clients, only 5 tabs are visible on the profile and for more, the candidate clicks on next to view other tabs and then submit the profile. I searched for all configuration tables and code but could not find any.
I appreciate if anyone could share this info if they know how to do this.
Points would be awarded .
Thank you
K.

Hi,
You can configure the tabs at Technical Settings->User interfaces->Setting for BSP->Flexibilization->Container Sequences.
if you want to add one tab, you have to define one element for container sequence and then assign it to the container of candidate profile at Modify Container Sequence.
Best Regards,
Shaoming

How to remove the tabs such as "startnow", "Shoppings", "Games"?

How to remove the tabs such as "startnow", "Shoppings", "Games"?

When do you see those tabs?
See these articles for some suggestions:
*https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved
See also:
*http://kb.mozillazine.org/Session_Restore

How to find the listener port on windows?

Hi Friends,
We have a client who is still using Oracle 8.0.6 on NT 4.0
I have a laptop with oracle client 10g.
I want to connect to the NT database to check it.
How do I know what port does the listener used ? what is the command to run at the c:\ command prompt?
I tried> c:\ lsnrctl stat but the command is not recognized
I tried to find the lsnrctl and bin but there is not.
Please help
Thanks a lot

ytterp2009 wrote:
Please help.. and please do NOT post [duplicate posts|http://forums.oracle.com/forums/thread.jspa?threadID=935282&tstart=0]
How to find the listener port on windows?The Internet Protocol stack comes with a number of utilities - one of these, called netstat, is very useful to determine which processes are doing what to which IP ports on that platform. Unfortunately, different flavours are implemented. So the Windows one does not support the parameters and output than the Unix/Linux one.
You can use the following on Windows (run it via a command console) to see what processes are listening on what address and port number:
c:\> netstat -n -a -p tcp
-n = display IP addresses and ports in numeric format
-a = list all ports (including ones used for listening
-p tcp = only display protocol entries for TCP An Oracle listener entry should look something as follows:
Proto Local Address Foreign Address State
TCP 0.0.0.0:1521 0.0.0.0:0 LISTENINGSeeing IP +0.0.0.0+ means that the Listener is accepting connections on all your network interfaces - which is standard. The port number is typically 1521. The foreign address is meaningless for a port in listening state.
PS. Why not simply check the listener.ora configuration file? Because what is actually happening may not be what you thought you configured to happen..

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

I have reorganised my music in the itunes folder in windows explorer. Now I can't sync all my music to a new iPad, or play the music from itunes (as it is looking in the old location). How do I repoint itunes to all my music?

I have reorganised my music in the itunes folder in windows explorer. Now I can't sync all my music to a new iPad, or play the music from itunes (as it is looking in the old location). How do I repoint itunes to all my music?

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Check out the following KB Articles: http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer
http://support.apple.com/kb/HT4527 iTunes: How to move your music to a new computer

How to setup the airport extreme for window xp

How to setup the airport extreme for window xp

Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

HELP!! How to get the position of active windows in the desktop

How to get the position of active windows in the desktop

You mean, active windows other than the program you're running, or windows the program puts there? And a real desktop (like where MyComputer is), or a desktop pane?

How to set the path variable on Windows ME?

I want to get a friend of mine to start using java the only problem is that we both dont know how to set the path variable in Windows ME. I cant seem to find any instructions on it for ME. So if someone could please tell me how or give me a llnk to directions for Windows ME. Thanks.

Refer to the Installation Instructions for the package that you installed - I believe #5 if the instructions has the information. A link to the instructions is at the page you installed from.

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to set the fix size jframe window

when I run the jframe ,the jframe window size is very small
1)how to set the fix size jframe window??
2)how to set the jframe cannot change the window size??
thx~~

1. You can set the size by calling JFrame's method setSize. There are two versions of this method: (1) setSize(int width, int height) and (2) setSize(Dimension d). Note, that when you use this method to set the frame size, you don't have to call JFrame's pack method.
2. JFrame has a method called setResizable(boolean resizable) which you can call with the argument false.
Without any ill intent, these questions are regarding something that is very easily answered by looking at the documentation for the JFrame class. I suggest to anyone working with swing to at least look briefly through the base classes they're extending before giving up. In my experience it is always more gratifying to figure things out on my own than asking someone. But please don't take this the wrong way, I respect people who seek out help in order to further their knowledge, instead of just giving up.

I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itunes

I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itune

If they are iTunes purchased music then go to Settings>iTunes and App Store and turn off Show All.
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

How to remove the time slider from my project and keep only buttons

How to remove the time slider from my project and keep only buttons to interact with my project .

If I understand you correctly, go to the skin editor (Project, Skin Editor in Captivate 4), select the Playback Control tab, uncheck the Progressbar check box. Leave checked the buttons for play/pause, rewind, forward, back, etc.
I hope this helps.
Mister C.

How to save the output of sap script in sap so that can be retrieved later

hi abapers
how to save the output of sap script in sap so that can retrieve the saved document later.
i have to save the rcia output from sap script in pdf document in sap so that it can be retrieved later
how to use dms
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Dec 26, 2008 11:01 AM

Hi Deepika,
Look into this link https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/401cca81-b861-2910-ada2-f416dfb3b3fe
Regards,
Pravin

How do I get icloud on my windows xp pc so I can transfer files to my iPad

how do I get iCloud on my windows xp pc so I can transfer files to my iPad

If you want to sync data between your PC and your iPad you will need iTunes, but if you want iCloud take a look at this link, http://support.apple.com/kb/HT4436

How to see the Tabs in Aurora( windows 8 app ) ? I only can see them by oppening a new tab. But In case I want to change tab I can't see them.

Similar Messages

Maybe you are looking for