HOW TO SELECT ALL ROWS IN A MULTI SELECT TABLE!!!!!
Hello
I have a table with tableSelectMany component. how can I set the page to initially select all rows when first opened?????
efffffttttttt? are you saying you will do an electronic funds funds funds funds funds transfer transfer transfer transfer transfer transfer to anyone who answers?
What version of JDeveloper are you using - that is quite important in order to be able to give you an answer.
What also might be useful is "please" and "thank you" instead of SHOUTING IN ALL CAPS THAT YOUR QUESTION IS IMPORTANT. Realizing that you asked this question over a weekend when most people dont sit and read the forum...
You have a habit of saying all your questions are URGENT!!!!!! which is generally considered, um...., impolite.
Similar Messages
-
Selecting all rows currently visible in the table
Hi ,
we need to add the "Select all" functionality for the a table used in one of the screens. The examples I have found for this would select all the elements of the node bound to the table. However, we need to select only those elements which are presently visible on the screen, which would change if the user presses the previous or next button.
Please guide me on how it can be possibly done .
Edited by: Dhruwat Bhagat on Dec 28, 2007 11:45 AMHi Dhruawat,
Modify the example functionality SelectAll like this:
Create visRow context attribute of type int. Bind this to firstVisibleRow property of table.
Check visibleRowCount value (default is 5)
//for loop on the table node
for(int i=visRow ;i<(visRow + visibleRowCount value );i++)
select the element;
// end of for loop
regards,
Siva -
How to select all rows in table automatically after refreshing?
Hi,All
After refreshing the table,I want to select all rows,like MultipleButton's function.
How can I do?
Thanks
Smile.Hi,-Grif-
* Set the selected state for the given row groups
* displayed in the table. This functionality requires
* the 'selectId' of the tableColumn to be set.
* @param rowGroupId HTML element id of the tableRowGroup component
* @param selected Flag indicating whether components should be selected
function selectGroupRows(rowGroupId, selected) {
var table = document.getElementById("form1:table1");
table.selectGroupRows(rowGroupId, selected);
}I don't know that the parameter selected is a boolean,or the checkbox(radio button) id?
Thanks
Smile -
I have a multi-select parameter that can have a list of thousands of entries. In general, the user will pick a few entries from the list or "Select All". If they check "Select All", I would much prefer that I get a NULL or an empty string
instead of a list of all values. Is there any way to do that?
In experimenting with a work-around, I tried putting an "All" label with a null value in the list, but it is ignored (does not display in the drop-down). If I use an empty string for the value, my "All" entry does get displayed, but so
does "Select All", which is confusing. Is there a way to suppress "Select All"?
- MarkI adapted the following from a workaround posted by JNeo on 4/16/2010 at 11:14 AM at
http://connect.microsoft.com/SQLServer/feedback/details/249227/multi-value-select-all-parameter-in-reporting-services
To get a null value instead of the full list of all values when "Select All" is chosen:
1) Add a multi-value parameter "MyParam" that lists the values to choose.
2) Add a DataSet "ParamCount" identical to the one used by "MyParam", except that it returns a single column named [Count] that is a COUNT(*) of the same data
3) Add a parameter "MyParamCount", set it to hidden and internal, then set the default value to 'Get values from a query', choosing "ParamCount" for the Dataset and the one [Count] column for the Value field.
4) Change the parameter for the main report DataSet so that instead of using [@MyParam], it uses this expression:
=IIF(Parameters!MyParam.Count =
Parameters!ParamCount.Value, Nothing, Join(Parameters!MyParam.Value, ",")) -
How to set selected all rows in h:dataTable
hello, I want to selected all rows in a dataTable.
I use JS to got it:
the selectBooleanCheckbox in the header of row:
<t:selectBooleanCheckbox id="aa" value="#{list.checkbox}" />the JS code :
<script type="text/javascript" language="JavaScript1.2">
function selectAll(obj, first, size) {
for (var i = 0; i < size; i++) {
var current = eval(first - 1 + i);
var objs = document.getElementById("form:listbody:listtable:" + current + ":aa");
obj.checked ? objs.checked = true : objs.checked = false;
</script>and the "selectall" code:
<h:selectBooleanCheckbox id="selectAll"
onclick="javascript:selectAll(this,#{firstRow},#{displayedRowsCount})"/>It run good in IE,but not it does not work in firefox.
Are there some method to do?
Or is there a method to select all rows just use JSF?
Needs you help!Yes, the paging for <h:dataTable> works pretty good, it manages the task through four methods created in the java code -- DataTable1_firstPageAction(), DataTable1_previousPageAction(), DataTable1_nextPageAction(), DataTable1_lastPageAction() -- without adding any javascript in the jsp page.
Maybe I could test if a java script similar to the <ui:table>'s one fit also the dataTable...
thanks -
How to get all rows in table to red using alternate rows properties option
How to get all rows in table to red using alternate rows properties option
Hi Khrisna,
You can get all rows red by selecting the color red in the "Color" and "frequency" to 1 under the "Alternate Row/Column colors".
I tried doing it and the colors freaked me out (all red) :-D
Kindly tell me if im missing something.
Regards,
John Vincent -
I am unabel to select all rows in advance table using Select All option
Hi all ,
I am unable to select all the rows in advance table . Select All option in advance table selects all rows present in working page but doesnt select the rows which we get by clicking next button ... i am having a requirement to select all the rows with a single click on select all , is it possible ..
Plz help
Thanking you allHi,
I'm using an adf table but i don't want to have the "Select All" and "Select None" options above the table. Does someone know how i have to remove those links?
Or is there indeed a solution to override the methodes of those links?
Message was edited by:
Alexander -
Select All rows in WebDybpro Tables
Hi All ,
I am working on NWCE 7.1 . i have table in my UI. and want to give slect all rows functionality in table. in NWCE is there
any way to give select all rows in table with out using , button and writing action to iterate node bound to table.
also i want to know about RowCreator ui element for table.(when we right click on table we get insert -> rowcreator). How this works
Thanks in advance
Regards
KavitaHi Kavita,
The row creator Ui element is not visible in table itself you can see it only in outline window.
and in its on create event you have to write the code which i have provided above. it will not be visible in table at design time but at run time when you will click on the last rows lead selection it will call the associated event and one row will be added to the table.
Regards
Jeetendra -
How to preselect all rows before displaying ALV report
I would like to select all rows before sending ALV Grid Display. User then can unselect couple of rows for further processing. How do I do that ?. Im using Method grid1->SET_TABLE_FOR_FIRST_DISPLAY for ALV Report Display. Any help appreciated.
Ok,
I've started the editor and check my code. I made few small mistakes (like with this exporting/importing), here's the sample - correctly working - code:
DATA: it_selected TYPE lvc_t_row,
wa_selected TYPE lvc_s_row,
wa_sflight TYPE sflight,
ltp_layout TYPE lvc_s_layo.
SELECT *
FROM sflight
INTO TABLE gi_sflight.
ltp_layout-stylefname = 'CELLTAB'.
ltp_layout-sel_mode = 'A'.
LOOP AT gi_sflight INTO wa_sflight.
wa_selected-index = sy-tabix.
APPEND wa_selected TO it_selected.
ENDLOOP.
* * Load data into the grid and display them
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_layout = ltp_layout
i_save = 'A'
CHANGING it_outtab = gi_sflight.
CALL METHOD go_grid->set_selected_rows
EXPORTING
it_index_rows = it_selected.
This time it is 100% correct.
Edited by: Marcin Cudo on Apr 11, 2010 2:13 AM -
Select ALL rows in ALV by an ACTION
Hi All -
Is possible to have a button with an Action "select all" and when the user trigger that action all the records in the ALV are selected?
i.e ALV has 10 records (lines or rows) and user click on a button with text "SELECT ALL" and once they click that button all the rows/lines are selected.
Thanks!
Jason P-VHi ,
yes it can be done....
here is the procedure to do it.....
first we need to make the context node "selection" property equals to "0..n" you can find this property at your component controller level.....where you set your "cardinality" as well...
than create a button in your view layout where the alv is being displayed and write the following code for button action:
DATA lo_nd_alv_table TYPE REF TO if_wd_context_node.
navigate from <CONTEXT> to <alv_table> via lead selection
lo_nd_alv_table = wd_context->get_child_node( name = wd_this->wdctx_alv_table ).
DATA counter TYPE i.
counter = lo_nd_alv_table->get_element_count( ).
DO counter TIMES.
lo_nd_alv_table->set_selected(
EXPORTING
index = sy-index ).
ENDDO.
I just tested this...and it worked for me....
Thanks...
AS...
Just forgot to mention....if you want to de-select them all...you can use the method:
lo_nd_alv_table->CLEAR_SELECTION(
the above code can be put in in the btn action method.....say you have two btns one to select all rows and one to de-select all....
this code can go under de-select all btn action method.....
Edited by: J Are on Dec 11, 2009 8:53 PM -
Selecting all rows in ALV on a button click
Hi Experts
Hi,
I have a dynamic ALV table. I also have a button 'Select All Rows'. On clicking the button I want all the rows in the ALV table selected which is done by using set_selected method at the context node.
All the rows in the alv is selected after clicking select_all except for the first row.
Need your inpts to solve the same.
Regards
KarthickUse the folowing code
*... get model
data:
lr_model type ref to cl_salv_wd_config_table.
lr_model ?= me->r_model.
*... get columns
data:
ls_column type salv_wd_s_column_ref,
lt_column type salv_wd_t_column_ref.
lt_column = lr_model->if_salv_wd_column_settings~get_columns( ).
data:
l_selected type abap_bool.
loop at lt_column into ls_column.
l_selected = abap_false.
read table value transporting no fields with key column = ls_column-id.
if sy-subrc eq 0.
l_selected = abap_true.
endif.
try.
me->if_salv_bs_model_column~set_selected(
column = ls_column-id
value = l_selected ).
catch cx_salv_bs_sc_object_not_found. "#EC NO_HANDLER
endtry.
endloop. -
Select all rows in af:table
Hi,
I need to select all rows in af:table, not only on current page.
I have following code on custom select all action:
getTable2().getSelectionState().addAll()and on button that needs to perform some action on selected rows I have this code
Set selectedRowSet = getTable2().getSelectionState().getKeySet();
if (!selectedRowSet.isEmpty()) {
Iterator it = selectedRowSet.iterator();
while(it.hasNext()) {
Key key = (Key)it.next();
}selectedRowSet.iterator() method throws java.lang.ClassCastException: oracle.jbo.Key.
When I select rows with af:tableSelectMany, which is inside selection facet and selects only rows on current page, this works fine.
Any ideas?
ThanksHi,
you can only access those data that is queried and part of the CollectionModel to the time you select all
RichTable _table = employeesBackingBean.getEmployeeTable1();
RowKeySet rks = new RowKeySetImpl();
CollectionModel model = (CollectionModel)_table.getValue();
int rowCount = model.getRowCount();
for (int i = 0; i < rowCount; i++) {
model.setRowIndex(i);
//note that in the simple POJO case, the row key is the same
//as the index. However, it would be wrong to just rely on this
//because other models or custom table models my return a more
//comples key. Therefore we iterate over the available rows to
//obtain the keys.
Object key = model.getRowKey();
//add the row keys to the RowKeySet to mark selected
rks.add(key);
_table.setSelectedRowKeys(rks);
AdfFacesContext.getCurrentInstance().addPartialTarget(_table);Frank
Frank -
How to Enable All rows in Table
Hi Friends,
I have to create table in firstview. My requirement is I will give 4 or 5 inputs at a time then click on save button that input data will be saved in ECC system
So in First View I have to create table by using apply template that time I have to pass all u201Cinput filedsu201D.
In that time the table having only first row editable and remaining rows will be disable. I need all rows in enable in that Table.
Or
My Requirement is how to enter multiple input detals at a time. At a time customer enter 4 or 5 inputs click on submit buttion that data will be saved in ECC System.
How to do this work.
Regards
Vijay Kalluri
Edited by: KalluriVijay on Mar 5, 2010 12:34 PMHi Vijay,
The number of editable rows in the table would be equivalent to the number of elements the node to which the table is bound contains. In your case, it might be only having one element for the node as so you can only see that row enabled while the rest of the rows are disabled. So, in case you want even the rest of the rows to be enabled then, you should just create more elements for the same node (with or without setting any of the attribute within).
Then, when you need to use the values in the table (existing or modified or new values), then loop through the table node and check if all the attributes within the node or the mandatory field value for the table entry is not nul, otherwise, ignore the corresponding table node element.
Rather, I would suggest you to have a button say "Add Rows" and within the action of the node, I would like you to create one more element for the table at the end. This way, you wont have any unnecessary element in the table to be checked for not holding any value.
Regards,
Tushar Sinha -
How to Empty all rows within a Power Pivot Model
Hi,
I would like to know how to empty all rows within a Power Pivot model. I am in the process of creating quite a complex Power Pivot model. This means I need to create some sort of primitive version control process, e.g. stored multiple backups of the Power
Pivot model without the data.
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/Forget what I've said before:
Have a look at Gil's thread here:
https://social.technet.microsoft.com/Forums/en-US/40abe021-1abd-4a2a-bf33-a035847fb7be/disconnect-datamodel-from-source?forum=powerquery
For Power Pivot it means that you can get rid of all your data, but Keep Relations, measures, ..everything.
Just import your tables once in order to get the connections right and move on.
Imke -
How to get all rows that are returned in inner sub query of select statemen
If a sub query in select statement returns more than one row than how to get all those returned rows in the final
output of the query .It will be all right if all column's value repeat and that multiple output of inner query comes
in another column .
How to get that ?As Frank said, you likely want a join, and likely an outer join to replicate the select in the projection. Something like:
SELECT id,stat, section, USER_ID concerned_person
FROM table_all,
left join table2
on room_id = sectoion and
sur_role = 'r001'
WHERE section IN (SELECT code
FROM t_area
WHERE dept= 'p002')An alternative, depending on where and how you are using the statement would be something like:
SQL> WITH t AS (
2 select 1 id from dual union all
3 select 2 id from dual),
4 t1 as (
5 select 1 id, 'One' descr from dual union all
6 select 1, 'Un' from dual union all
7 select 1, 'Une' from dual)
8 SELECT t.id, CURSOR(SELECT t1.id, t1.descr from t1
9 WHERE t1.id = t.id)
10 FROM t;
ID CURSOR(SELECTT1.ID,T
1 CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
ID DESCR
1 One
1 Un
1 Une
2 CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
no rows selectedJohn
Maybe you are looking for
-
Importing Actions from PS-CS3 to CS4
I recently upgraded from Photoshop CS3 to CS4 I tried to import the "Actions" I used in CS3 into CS4, but they didn't work. Is there a converter or something? Anyway to get those actions into CS4 without re-recording them? Thanks, --PS
-
Display SQL query in error text
Using CFMX 6.1. Is it possible to get our error handler page to display the SQL query that fails and causes an error? If tried #error.sql# but it doesn't exist after a db exception. If I put a cftry around a particular query and then use cfcatch.sql
-
Hi, I made one PO. Got it released and after that i was able to change the rates in PO, which shouldnt have actually happened. For further changes i should have revoked the release and did the changes..... What is wrong with my release startegy? Reg
-
how can i set the layer priority as my action script mc plays over top of my 3d rendered movie all help appreciated
-
Dead for no apparent reason - logic board AGAIN?
So last night, after I had installed all my software updates and restarted successfully, I decided to pop in a new airport card b/c mine had been giving me trouble (and I wanted to find out whther it was the card or the logic board that was failing)