How to select option to the particular view container

Hi All,
I am working on ALV , i have view container for search parameters, here i want to add select option in to the same view container.. anyone help me to achive the same.
Thanks
Ram

As Tamil said above, you have to put the select options in the view that you are embedding in the view container. For help on how to use select options in webdynpro, you can have a look at the tutorial in the following link...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09fec07-0dab-2a10-dbbe-c9a26bdff03e

Similar Messages

Populating select-options in the main view

hi
i have two views. main screen and view1.
in main i have created a selection screen with 6 fields. view1 also has selection screen and same fields in it. when i go to view1 and click on ok button, i need to comeback to main view and populate the selection field with the values entered in view1. i am successful to some extent. i am able to access the values entered in view1 selection fields in "modify" method of the main view, but do not know how to fill the selection fields of main view with this values.
thanks

Hi,
I just want to be sure that have you created the node in the context of the component controller and mapped the same in both of the views for building the selection screen?
If yes then you wont be having any problem in accessing the values from any views, changes in any view will reflect in the other .
If no then just modify the design as per the above description.
TO read the vlalue...just read the context of the node in the view using the code wizrd, and set the value to the attributes using set_attributes method.
Hope this might help you out.
Pooja

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

How to create the select option in the screen

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Try RANGES.
The RANGES has same structure as that of select-options.

How to create the select option for the Plant in screen (Module pool)

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Cross post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Steps to get SELECT-OPTIONS in module pool programs.
1.Start one dialog program with SAPMZ_001.
Place the below code in the TOP include of the dialog program.
TABLES marc.
SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
SELECT-OPTIONS: werks FOR marc-werks.
SELECTION-SCREEN END OF SCREEN 3200.
2 .Create one screen 3000.
Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
PROCESS AFTER INPUT.
CALL SUBSCREEN l_subscreen.
Activate all.
Create Transaction code for the dialog program .
Execute the transaction code. You will see the select-option for werks how we see on Selection-screen.

Multiple select option in the screen painter

Hi all,
I want to give multiple select option for a particular field in the screen painter.
how to provide it.
Nitin

Hi,
Refer to this link..[Select-Option in Dialog programming |Re: Select-Option in Dialog programming]
[How to make select option in module pool |how to make select option in module pool]

Output from tables which I mention in select options of the screen as input

Dear All,
I want to fetch the data in the form of output from tables which I will mention in select options of the screen as input.
In selection screen option if I write any table name then how can i select this table in select query of ABAP program ?.
I may select any tables in select options of screen. But In select query I should get that table name automatically.. How ?
e.g. If i put table name as an input i.e. MARA in select option .
In program how to write select query to get records from that table ?
SELECT MTART MATKL from MARA
Every time I should not go to select query of program & replace the tablename.
How to solve this problem ?

Hi,
PARAMETERS p_table(30)." type string.
"This is a Tested code Just Execute and Check
START-OF-SELECTION.
DATA: lt_tmp TYPE REF TO data.
DATA : line TYPE REF TO data.
FIELD-SYMBOLS: <lt_tmp> TYPE STANDARD TABLE, <wa>, <dyn_field>.
CREATE DATA lt_tmp TYPE STANDARD TABLE OF (p_table).
ASSIGN lt_tmp->* TO <lt_tmp> .
CREATE DATA line LIKE LINE OF <lt_tmp>.
ASSIGN line->* TO <wa>.
SELECT * FROM (p_table) INTO TABLE <lt_tmp>.
IF sy-subrc = 0.
    LOOP AT <lt_tmp> ASSIGNING <wa>.
      DO.
        ASSIGN COMPONENT sy-index
           OF STRUCTURE <wa> TO <dyn_field>.
        IF sy-subrc NE 0.
          EXIT.
        ENDIF.
        IF sy-index = 1.
          WRITE:/ <dyn_field>.
        ELSE.
          WRITE: <dyn_field>.
        ENDIF.
      ENDDO.
    ENDLOOP.
ENDIF.
Cheerz
Ram

Off Set on a Select Option on the Query

Hi Peolpe,
How can i do to put a Off set on a select option on the query ?
Thanks.

Hello rafael,
When you restrict any char. with a variable just right click on the variable, you will see the option on the contex menu.
Sarhan.

Can you pass a hidden value along with your select option in the form selec

Can you pass a hidden value along with your select option in the html form select

Off topic. Locking.

Have new update but when i am on trying to sync I have no scroll down bar to select option on the bottom of pages so sync is not done with all i want on it. Using my arrow keys also dont work. I have deleted itunes

Have new update but when i am on trying to sync I have no scroll down bar to select option on the bottom of pages so sync is not done with all i want on it. Using my arrow keys also dont work. I have deleted itunes and reinstall but its still the same. Any ideas?

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

How to select and store the dynamically clicked values in the checkboxes?

Hi Gurus
How to select and store the dynamically clicked values in the checkboxes?
Scenario:-
I am having a tree structure but I am not getting that user has clicked the which nodes.
So how to do it.
Pls.

Hi,
Once again, this is dependent on what your implementation expects. It would seem that your implementation is expecting all of the API to be coded in Java Card so it would make sense that you would load these packages like any other package. Loading an applet is not a special case, it just has an extra step of installing instances of it (and can actually be installed). Any other Java package just needs to be loaded. As such, just load your CAP files for each package of the API before loading any code that depends on it.
Cheers,
Shane

The size of your selected options exceeds the available space

I am trying to install a brand new full version of Adobe Creative Suite 4 Web Premium.
I am unable to proceed, as the install options window tells me "The size of your selected options exceeds the available space" with a red exclamation point.
It says my options require 9.6GB of space.
I am trying to install on my D Drive, which has 1.1 TB of available space. Yes, that's right, Terrabytes.
Help!
System: Intel Core2 Quad Q6600 @2.4 GHz, Windows Vista Ultimate 64 bit SP1, 4 GB RAM, system drive WD Raptor (75GB) and main drive (where I am trying to install CS4) is (6) 500GB seagate SATA hard drives in a 2.5TB RAID 5 array. Motherboard is a Gigabyte GA-P35-DQ6 and video is an Nvidia GEForce 8800GT (512 RAM). RAID controller is onboard the motherboard (Intel ICH8R)

SOLVED!
Bob and Peter, you nailed it.
I had inadequate room on the C drive...I was down to only 5 GB of space.
I cleaned up the desktop (The wife thinks that is a great place to store everything) and freed up my C drive so it had just over 10 GB of free space, and the red exclamation point went away. It is now happily installing onto my D drive.
Ian, my C drive (system) is a Western Digital Raptor...10,000 RPM. They are really small (75GB) but really fast so that windows boots up really quick. It is a performance thing. My D is a RAID array for redundancy...as I cannot afford to lose my pictures, videos, and documents, etc. - and I always keep my program installs on D so as to keep the C drive speedy and un-cluttered - plus if and when windows gets corrupted (which it does once every couple of years for some reason), I can re-do it in 5 minutes with an image using Acronis True Image.
Thanks to all of you for your ideas, and I am glad I got it solved. If any Adobe employees read this...you can at least throw in some nice paper manuals for the software. When software is $1600.00 I'm not real concerned about saving another tree - and you shouldn't be either...I'd rather have some paper manuals for reference when I buy a full retail package. So pump up the packaging please. Thanks!!!!
Shane

How can I turn on the Compatibility View Option?

In viewing a vendor's online reporting, I noticed that the report's header appears on the right, while the report's content appear on the left, creating a confusing viewing.
The vendor has recommended that I turn on the Compatibility View Option, but I cannot find this option anywhere.
Would someone direct me to the section where I can turn on the Compatibility View Option?
Thank you!

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to use select-options in the function module of import parameter ?

Hi ...
   I have created a BAPI and tested in SWO1 tcode , by giving the single value for an company code ( BUKRS ) , it executed properly .
Same thing is working after implementing in a program .
so now it is working for fetching a single company code details .
My requirement is : I want to use select-options in program as well as in function module IN IMPORT PARAMETER.
Program :
REPORT ZTEST.
TABLES : T001 , ZBAPI_STR .
TYPES : BEGIN OF TY_ITEM .
          INCLUDE STRUCTURE ZBAPI_STR .
TYPES : END OF TY_ITEM .
DATA :WA_ITEM TYPE TY_ITEM ,
      ITEM LIKE STANDARD TABLE OF WA_ITEM INITIAL SIZE 0 .
PARAMETER : BUKRS TYPE ZBAPI_STR-BUKRS.
call function 'ZBAPI_FMT001'
exporting
    bukrs         = BUKRS
IMPORTING
RETURN        =
tables
    itemtab       = ITEM
IF ITEM IS NOT INITIAL .
LOOP AT ITEM INTO WA_ITEM .
    WRITE : / WA_ITEM-BUKRS , WA_ITEM-BUTXT , WA_ITEM-ORT01 , WA_ITEM-LAND1 .
ENDLOOP.
ENDIF.
FUNCTION MODULE :
FUNCTION ZBAPI_FMT001.
""Local Interface:
*" IMPORTING
*"     VALUE(BUKRS) TYPE EFG_TAB_RANGES
*" EXPORTING
*"     VALUE(RETURN) TYPE BAPIRET2
*" TABLES
*"      ITEMTAB STRUCTURE ZBAPI_STR
SELECT BUKRS BUTXT ORT01 LAND1 FROM T001 INTO TABLE ITEMTAB WHERE BUKRS = BUKRS .
ENDFUNCTION.
Regards
Deepa.

I have given a similiar example which i did
Declare a
Table type:Z_TT_PONUM
Short text : Select options PO Number
in SE11 tcode with row type eg: Z_ST_PONUM
create a structure (this will be the row type)
Structure          Z_ST_PONUM
Short text         Select Options Field PO number
Compenent Compent type
SIGN       BAPISIGN      Inclusion/exclusion criterion SIGN for range tables
OPTION       BAPIOPTION      Selection operator OPTION for range tables
LOW       EBELN                      Purchasing Document Number
HIGH       EBELN                      Purchasing Document Number
In the function module import
give as
I_PO_NUM     TYPE     Z_TT_PONUM     opt pass value Select options PO Number
Hope this is exactly what you want to know.
So you create a structure simliar to mine but the low an high whould be your component
then a table type and then include that in the BAPI.
Then pass your select-option value to this BAPI when you call this BAPI in the program

How to set a dynamic variant for date in select-options in the upper field

Hi Variant experts Good Evening!
I have the following problem while setting up a dynamic varinat .
Ex: select-options: dat for sy-datum.
I am able to save the lower limit as a dynamic value but not able to save the upper values as dynamic in the select-options. Could any of you please help me in this.
Regards
Ravi.

i hope dynamic variant concept is not there,
but u can use the fn module DYPRO_GET_VALUES and
DYNPRO_SET_VALUES
DYNPRO_GET_VALUES gets the values in the screen,
DYNPRO_SET VALUES sets the values.
first get the values, compare and set the values as u want

How to select option to the particular view container

Similar Messages

Maybe you are looking for