Off Set on a Select Option on the Query
Hi Peolpe,
How can i do to put a Off set on a select option on the query ?
Thanks.
Hello rafael,
When you restrict any char. with a variable just right click on the variable, you will see the option on the contex menu.
Sarhan.
Similar Messages
-
How to set default value in select option for ABAP query
Hi experts,
What is the way to set up default values for select-options in ABAP query.
e.g.
I have one field 'Year' in my ABAP query selection screen.
I want value of current year to be appeared here whenever user execute report
Thanks in Advance
-HarkamalHi Harkamal,
execute your Query via SQ01. On Selection-Screen
goto save Variant. Mark your field
as selection variable an press Button election variable.
Take variable from TVARV and use it.
Than save the Variant.
Look at TVARV if the 'Year' is updated to the actualYear!
regards, Dieter -
Do we can set any scroll option in the query designer?
Hi,
I would like to know is there any setting for scroll option at the query designer level.
This is because if I look at some reports so I could see little ups and down (small up and down arrows) symbol at the column level, and is enabled for only few reports.
Need some input on the same.
ThanksHi
I think you are right clicking on KeyFigures Heading, instaed of that can you on any Keyfigure (example KF1 and KF2 etc..). once you done that you will see the following options.
EDIT
COPY CTRL + C
CUT CTRL + X
PASTE CTRL + V
DELETE DEL
WHERE USED LIST
LEVEL DOWN CTRL+ >
LEVEL UP CTRL + <
PROPERTIES ALT + ENTER
please select the highlighted options on the required key figures, then execute the query.
regards
Pavan -
Set Parameter for Select Option & Customized field
Hi All,
I had 2 questions here:
1. This field in the report is a customized field and did not have any parameter.
Is there any way to set the parameter for such fields?
2. This field is a select option in the report.
How can i set the parameter for the select option with lower and higher range?>
Sally Teo wrote:
> Hi All,
>
> I had 2 questions here:
>
> 1. This field in the report is a customized field and did not have any parameter.
> Is there any way to set the parameter for such fields?
----> plz ref ur prev.Post.
>
> 2. This field is a select option in the report.
> How can i set the parameter for the select option with lower and higher range?--->
i dont think its possible to give High/low values to them, better to write small BDC to pass the data.
regards
Prabhu -
How to get the values of Select-options from the screen.
The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.
Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = zlv_dynpro
dynumb = syst-dynnr
request = 'A'
TABLES
dynpfields = temp_fields
EXCEPTIONS
OTHERS = 0.
LOOP AT temp_fields INTO dyn_field.
IF dyn_field-fieldname EQ 'S_PO-LOW'.
SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
WHERE ebeln EQ dyn_field-fieldvalue.
EXIT.
ENDIF.
ENDLOOP. -
How to create the select option in the screen
HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PMTry RANGES.
The RANGES has same structure as that of select-options. -
Output from tables which I mention in select options of the screen as input
Dear All,
I want to fetch the data in the form of output from tables which I will mention in select options of the screen as input.
In selection screen option if I write any table name then how can i select this table in select query of ABAP program ?.
I may select any tables in select options of screen. But In select query I should get that table name automatically.. How ?
e.g. If i put table name as an input i.e. MARA in select option .
In program how to write select query to get records from that table ?
SELECT MTART MATKL from MARA
Every time I should not go to select query of program & replace the tablename.
How to solve this problem ?Hi,
PARAMETERS p_table(30)." type string.
"This is a Tested code Just Execute and Check
START-OF-SELECTION.
DATA: lt_tmp TYPE REF TO data.
DATA : line TYPE REF TO data.
FIELD-SYMBOLS: <lt_tmp> TYPE STANDARD TABLE, <wa>, <dyn_field>.
CREATE DATA lt_tmp TYPE STANDARD TABLE OF (p_table).
ASSIGN lt_tmp->* TO <lt_tmp> .
CREATE DATA line LIKE LINE OF <lt_tmp>.
ASSIGN line->* TO <wa>.
SELECT * FROM (p_table) INTO TABLE <lt_tmp>.
IF sy-subrc = 0.
LOOP AT <lt_tmp> ASSIGNING <wa>.
DO.
ASSIGN COMPONENT sy-index
OF STRUCTURE <wa> TO <dyn_field>.
IF sy-subrc NE 0.
EXIT.
ENDIF.
IF sy-index = 1.
WRITE:/ <dyn_field>.
ELSE.
WRITE: <dyn_field>.
ENDIF.
ENDDO.
ENDLOOP.
ENDIF.
Cheerz
Ram -
How to create the select option for the Plant in screen (Module pool)
HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Cross post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PMSteps to get SELECT-OPTIONS in module pool programs.
1.Start one dialog program with SAPMZ_001.
Place the below code in the TOP include of the dialog program.
TABLES marc.
SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
SELECT-OPTIONS: werks FOR marc-werks.
SELECTION-SCREEN END OF SCREEN 3200.
2 .Create one screen 3000.
Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
PROCESS AFTER INPUT.
CALL SUBSCREEN l_subscreen.
Activate all.
Create Transaction code for the dialog program .
Execute the transaction code. You will see the select-option for werks how we see on Selection-screen. -
Can you pass a hidden value along with your select option in the form selec
Can you pass a hidden value along with your select option in the html form select
Off topic. Locking.
-
Have new update but when i am on trying to sync I have no scroll down bar to select option on the bottom of pages so sync is not done with all i want on it. Using my arrow keys also dont work. I have deleted itunes and reinstall but its still the same. Any ideas?
iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?
-
How to select option to the particular view container
Hi All,
I am working on ALV , i have view container for search parameters, here i want to add select option in to the same view container.. anyone help me to achive the same.
Thanks
RamAs Tamil said above, you have to put the select options in the view that you are embedding in the view container. For help on how to use select options in webdynpro, you can have a look at the tutorial in the following link...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09fec07-0dab-2a10-dbbe-c9a26bdff03e -
The size of your selected options exceeds the available space
I am trying to install a brand new full version of Adobe Creative Suite 4 Web Premium.
I am unable to proceed, as the install options window tells me "The size of your selected options exceeds the available space" with a red exclamation point.
It says my options require 9.6GB of space.
I am trying to install on my D Drive, which has 1.1 TB of available space. Yes, that's right, Terrabytes.
Help!
System: Intel Core2 Quad Q6600 @2.4 GHz, Windows Vista Ultimate 64 bit SP1, 4 GB RAM, system drive WD Raptor (75GB) and main drive (where I am trying to install CS4) is (6) 500GB seagate SATA hard drives in a 2.5TB RAID 5 array. Motherboard is a Gigabyte GA-P35-DQ6 and video is an Nvidia GEForce 8800GT (512 RAM). RAID controller is onboard the motherboard (Intel ICH8R)SOLVED!
Bob and Peter, you nailed it.
I had inadequate room on the C drive...I was down to only 5 GB of space.
I cleaned up the desktop (The wife thinks that is a great place to store everything) and freed up my C drive so it had just over 10 GB of free space, and the red exclamation point went away. It is now happily installing onto my D drive.
Ian, my C drive (system) is a Western Digital Raptor...10,000 RPM. They are really small (75GB) but really fast so that windows boots up really quick. It is a performance thing. My D is a RAID array for redundancy...as I cannot afford to lose my pictures, videos, and documents, etc. - and I always keep my program installs on D so as to keep the C drive speedy and un-cluttered - plus if and when windows gets corrupted (which it does once every couple of years for some reason), I can re-do it in 5 minutes with an image using Acronis True Image.
Thanks to all of you for your ideas, and I am glad I got it solved. If any Adobe employees read this...you can at least throw in some nice paper manuals for the software. When software is $1600.00 I'm not real concerned about saving another tree - and you shouldn't be either...I'd rather have some paper manuals for reference when I buy a full retail package. So pump up the packaging please. Thanks!!!!
Shane -
How to add customize message on the variable selection screen in the query
Hi all,
Can we add an customise message on the variable selection screen in the query? If yes please let me know how it can be achevied?
Thanks,
RaniHi Rani,
I faced a similar issue (for what I understand your request is).
My requirement for the Variable Screen was to do:
1) place a link to a ppt file
2) remove buttons "Save", "Save As...), "Delete"... the standard buttons come when running the Query or WebTempl
We were using a Web Templ for BI7.0
I struggled trying to find out how to do it. My conclusions are:
- WAD, not sure we can accomplish it using a Web Template but i did not "play" a lot with the Web_Template Properties in order to know
- XHTML, I was told in my post HTML modification was the way, but I have close to nil background in HTML and couold not find the way of accessing the Variable Entry screen
For instance, I had to remove similar buttons and change some font size from a link on the Web Template (WAD), which was pretty straight forward. In WAD the buttons come with its own icon and to increase the Font size for that link we used XHTML (<font size="2" >). But the heck of the variable screen...well, i just did not get trhough to it to modify it in any way.
Good luck,
Definetly in a Query I would say that no.
alex
PS: If anyone had a better insight, please feel free to share it. -
How to set a dynamic variant for date in select-options in the upper field
Hi Variant experts Good Evening!
I have the following problem while setting up a dynamic varinat .
Ex: select-options: dat for sy-datum.
I am able to save the lower limit as a dynamic value but not able to save the upper values as dynamic in the select-options. Could any of you please help me in this.
Regards
Ravi.i hope dynamic variant concept is not there,
but u can use the fn module DYPRO_GET_VALUES and
DYNPRO_SET_VALUES
DYNPRO_GET_VALUES gets the values in the screen,
DYNPRO_SET VALUES sets the values.
first get the values, compare and set the values as u want -
Dynamic Selection option in the selection screen
Hi ,
I have a requirement like this ....
The user wants some fields to be default available in the selection screen. But they also want to be able to select the data based on additional fields (all the remaining fields ) which they want to see in the dynamic selection .
The basic list for selections should be limited to the fields listed in the specifications provided to me and the remaining fields should be made available through the dynamic selection option.
In the transaction FBL3N , this facility is provided.
Kindly help me with this..
thanks,
Sumit .Hi Sumit,
To include dynamic selection check this sample code.
TYPE POOLS DECLARATIONS FOR VALUE REQUEST MANAGER AND ICONS
TYPE-POOLS : vrm,
icon.
*SELECTION SCREEN FIELDS
TABLES : sscrfields.*GLOBAL DECLARATIONS
DATA : flag TYPE c,
tablename(10),
mmtable LIKE dd02l-tabname,
sdtable LIKE dd02l-tabname,
hrtable LIKE dd02l-tabname.*DECLARATIONS FOR SELECTION SCREEN STATUS
DATA it_ucomm TYPE TABLE OF sy-ucomm.***********SELECTION-SCREENS**********************
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.*FOR DYNAMIC DISPLAY OF MODULES
PARAMETERS : pa RADIOBUTTON GROUP rad USER-COMMAND com MODIF ID mod,
pb RADIOBUTTON GROUP rad MODIF ID rad,
pc RADIOBUTTON GROUP rad MODIF ID cad.SELECTION-SCREEN SKIP.**TO INCLUDE DYNAMIC ICONS
SELECTION-SCREEN COMMENT 2(6) text_001.*DYNAMIC LIST BOX BASED ON USER SELECTIONS
PARAMETERS one AS LISTBOX VISIBLE LENGTH 20 MODIF ID mod.
PARAMETERS two AS LISTBOX VISIBLE LENGTH 20 MODIF ID rad.
PARAMETERS three AS LISTBOX VISIBLE LENGTH 20 MODIF ID cad.SELECTION-SCREEN END OF BLOCK blk1.*DISPLAY DYNAMIC PUSHBUTTON ON APP TOOLBAR ON USER CLICKS
SELECTION-SCREEN: FUNCTION KEY 1,
FUNCTION KEY 2,
FUNCTION KEY 3.**EVENT ON SELECTION SCREEN FOR OUTPUT DISPLAY
AT SELECTION-SCREEN OUTPUT.*CLICK OF FIRST RADIO BUTTON
IF pa = 'X'.
sscrfields-functxt_01 = 'Materials Management'.
WRITE icon_plant AS ICON TO text_001.
*CODE TO GET DYNAMICS BASED ON THE SELECTED RADIO
LOOP AT SCREEN.
IF screen-group1 = 'MOD'.
screen-intensified = '1'.
screen-active = 1.
screen-display_3d = '1'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'RAD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'CAD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.*CLICK OF SECOND RADIO
IF pb = 'X'.
sscrfields-functxt_02 = 'Sales And Distribution'.
WRITE icon_ws_ship AS ICON TO text_001.
LOOP AT SCREEN.
IF screen-group1 = 'RAD'.
screen-intensified = '1'.
screen-active = 1.
screen-display_3d = '1'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'MOD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'CAD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.*CLICK OF THIRD RADIO
IF pc = 'X'.
sscrfields-functxt_03 = 'Human Resources'.
WRITE icon_new_employee AS ICON TO text_001.
LOOP AT SCREEN.
IF screen-group1 = 'RAD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'MOD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'CAD'.
screen-intensified = '1'.
screen-active = 1.
screen-display_3d = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.*CUSTOMISING THE TOOLBARS OF THE SELECTION SCREEN
*WITH F8 BUTTON DISABLED APPEND : 'PRIN' TO it_ucomm,
'SPOS' TO it_ucomm,
'ONLI' TO it_ucomm. CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = sy-pfkey
TABLES
p_exclude = it_ucomm.
**EVENT ON THE SELECTION
AT SELECTION-SCREEN.* LIST BOX ONE VALUES
CASE one.
WHEN '1'.
mmtable = 'MARC'.
WHEN '2'.
mmtable = 'MARA'.
WHEN '3'.
mmtable = 'MARD'.
WHEN '4'.
mmtable = 'MARM'.
ENDCASE.* LIST BOX TWO VALUES
CASE two.
WHEN '1'.
sdtable = 'VBAK'.
WHEN '2'.
sdtable = 'VBAP'.
WHEN '3'.
sdtable = 'VBUK'.
WHEN '4'.
sdtable = 'VBUP'.
ENDCASE.* LIST BOX THREE VALUES
CASE three.
WHEN '1'.
hrtable = 'PA0001'.
WHEN '2'.
hrtable = 'PA0006'.
WHEN '3'.
hrtable = 'PA0022'.
WHEN '4'.
hrtable = 'PA0008'.
ENDCASE.*VALUES FOR CLICK OF THE PUSHBUTTON ON APP TOOLBAR
*AND ENABLING THE BUTTONS TO PERFORM F8
CASE sscrfields-ucomm.
WHEN 'FC01'.
tablename = mmtable.
sscrfields-ucomm = 'ONLI'.
WHEN 'FC02'.
tablename = sdtable.
sscrfields-ucomm = 'ONLI'.
WHEN 'FC03'.
tablename = hrtable.
sscrfields-ucomm = 'ONLI'.
ENDCASE.*INITIALIZATION EVENT
INITIALIZATION.*VALUES ASSIGNED TO DROPDOWNLISTS IN THE SUBROUTINES
PERFORM f4_value_request_pa.
PERFORM f4_value_request_pb.
PERFORM f4_value_request_pc.*START OF SELECTION EVENT
START-OF-SELECTION.*SUBROUTINE FOR OUTPUT
PERFORM output.*&----------------------------------------------------------------*
*& Form f4_value_request_PA
* text
*SUBROUTINE TO PROVIDE DROPDOWN VALUES TO LIST1
FORM f4_value_request_pa. DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list. l_value-key = '1'.
l_value-text = 'Plant Data for Material'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '2'.
l_value-text = 'General Material Data'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '3'.
l_value-text = 'Storage Location Data for Material'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '4'.
l_value-text = 'Units of Measure for Material'.
APPEND l_value TO li_list.
CLEAR l_value.
l_name = 'ONE'. CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = l_name
values = li_list
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.ENDFORM. " f4_value_request_tabname*&----------------------------------------------------------------*
*& Form f4_value_request_PB
* text
*SUBROUTINE TO PROVIDE DROPDOWN VALUES TO LIST2FORM f4_value_request_pb. DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list. l_value-key = '1'.
l_value-text = 'Sales Document: Header Data'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '2'.
l_value-text = 'Sales Document: Item Data'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '3'.
l_value-text = 'Sales Document:Header Status'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '4'.
l_value-text = 'Sales Document: Item Status'.
APPEND l_value TO li_list.
CLEAR l_value.
l_name = 'TWO'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = l_name
values = li_list
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_value_request_PB*&----------------------------------------------------------------*
*& Form f4_value_request_PC
* text
*SUBROUTINE TO PROVIDE DROPDOWN VALUES TO LIST3FORM f4_value_request_pc. DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list. l_value-key = '1'.
l_value-text = 'HR Master :Infotype 0001 (Org. Assignment)'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '2'.
l_value-text = 'Address Infotype 0006'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '3'.
l_value-text = 'Education Infotype 0022'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '4'.
l_value-text = 'Basic Pay Infotype 0008'.
APPEND l_value TO li_list.
CLEAR l_value.
l_name = 'THREE'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = l_name
values = li_list
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_value_request_PC
*& Form OUTPUT
* text
* -->P_TABLENAME text
*fINAL OUTPUT
FORM output. DATA p_table(10). p_table = tablename.*popup to display teh selected table and
*Continue button is clicked
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
titel = 'User Selections '
textline1 = p_table
textline2 = 'is the Selected table'
start_column = 25
start_row = 6.*assigning the table value in p_table to the
* Table in SE16 transaction by explicitly calling
SET PARAMETER ID 'DTB' FIELD p_table.
CALL TRANSACTION 'SE16'.
ENDFORM. "OUTPUT
Regards,
Manoj Kumar P
Maybe you are looking for
-
Not able to run my webobject project on WO5.4
When I am trying to run my WebObject project,it stops running and the following message is displayed on the console:- [2012-12-21 09:19:19 PST] <main> WOMaxIOBufferSize=8196 [2012-12-21 09:19:19 PST] <main> WOWorkerThreadCountMin=16 [2012-12-21 09:19
-
Graphic Design and Adobe Products
I am a graphic design student, graduating in about a year. I maxxed out my MBP's ram and bought my first mac in hopes that it would be a great tool for graphics. I see that photoshop and illustrator (adobe tools) are running through rosetta and haven
-
Anyone else gets a 'Failed to update favourites' error in Trailers App?
So, since updating my iPad 2 to iOS 6 a lot of things has gone wrong and pretty much useless, including Trailers App which now won't let me add movies to my Favourites list. Everytime I try an error appears saying: failed to upload favorutes. I tried
-
WEb Kit seems to be damaged...
Lots of applications seem to have broken after the latest security update.. Software Update safari and others.... here is Safari's Crash log all are similar... Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit Referenc
-
Tengo problemas con mi iPad, No agarra interner o WI-FI. Pordran ayudarme por favor