How to select several values from a user exit variable in a planning folder

Hello,
I have created a user exit variable for limiting the values only to which the user need to access.
For a simulation part, it is then necessary for him to select several values from these values (not only one, and not all)
But It seems in this case the user has only two possibilities :
- keep all the values without any restriction
- restrain the selection to only one value.
It seems possible for the user to access to a multiple choice window, but this possibility doesn't seems to work : in all tests we did, only the first value was taken into account by BPS.
If this method is not good do you know an other manner to permit the user to choice several values amongst a set of pre-selected (because the original set is too important) values ?
Thanks for your help.

Hi Mayank,
Thanks for your response, but I don't think it corresponds to my problem.
I my case, I use a user exit variable to filter some data. It seems BPS offers the possibility to the user to select several values amongts the pre-selected values presented by the user exit variable, but it doesn't work. We can use a popup in which we enters the required values, but in final, only the first value is taken into account.
I don't know if it is due to a BPS bug or if it is not a good solution in regard to BPS philosophy. In this case, the concerned caracteristic isn't in the header but in lead columns.
I must present a solution to my client next monday, so I have not enough time to open an OSS message.
An alternate solution should be interesting too.
My need is to present to a user a selection of values amongst all values from an infoobject (the user exit variable seemed to be a good solution) and the user must have the possibility to select some values amongst these as filter.
Regards

Similar Messages

How to select multiple values from a listbox

Hi,
I have a list box on my UI which is not allowing me to select multiple values
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving error
When i drag & drop the component i am unable to drop it as a multi select list box that option is not coming.
I am working on Jdev 11.1.1.3 and I am using ADF/BC components
How to select multiple values from a listbox ?
Thanks,

Hi,
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving errorank
And what is the error ?
Frank

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to Select a value from DropDownByIndex -Urgent

Hi All,
I have dropdownbyindex UI elements in my Views, I get values from BAPI. When click records in a table, It goes to another view to display full record. Here i have dropdownbyIndexes So it should select one of appropriate value in dropdownbyindex based on record(Value) in table.
Example:
<u><i><b>In Table View</b></i></u>
id                  title                 status          priority
10000      webDynPro            New              Low
<i><u><b>Detail View:</b></u></i>
id                   10000
title                 webDynPro
Status             New                  [New,Old,Open,Closed]---DropDownbyIndex
Priority            Low                   [High,Low,Medium]---DropDownByIndex..4m BAPI
How to select Appropriate Values from DropdownbyIndex. if any one has sample code, that will be helpful.
Note: I am using Model Nodes
Thanks and Regards
Ravi Golla

Hi Ravi,
In details view, you will have corresponding context node created for Status and priority dropdown fields.
Let suppose, context node for Status is, StatusNode.
value attribute inside this is,
StatusNode
|_ StatusAttrib
Now, you need to write following code to set l_status ="LOW" value in it.
wdContext.nodeStatusNode().moveFirst();
for(int i=0; i<wdContext.nodeStatusNode().size(); i++)
    if(wdcontext.currentStatusNodeElement().getStatusAttrib().equals(l_status)
          wdContext.nodeStatusNode().setLeadselection(i);
          break;
wdContext.nodeStatusNode().moveNext();
write same code for priority also.
Let me know if it is not working with you.
regards,
Bhavik

BPS User Exit Variable based on Planning Package Selection

Hi,
I'm implementing a SAP BW-BPS planning layout to be integrated into the CRM we user interface.
Most of the characteristic selections come from the CRM fields that need to be filled by the user when creates a trade promotion.
The charcteristic selections work (as standard) just if in the planning level I flag "Selection in Package", then in package these selections are dinamically defined from what the user select in the CRM fields at runtime.
My problem is that I have to build a BPS User Exit variable to filter, in the planning level, the proper Planning Area based on the CRM Sales Organization value.
The characteristic CRM Sales Organization belongs to whose chararcteristic the value is determined dinamically in the planning package.
Is it possible for a BPS user exit variable, set in the planning level, to catch the value of a characteristic selection made at planning package?
Many thanks for your help.
Alessandro

Hi Indu,
Many thanks for your answer.
I have already took a look at the document posted by you but I didn't find the solution to my problem.
This because i have to create a user exit variable that need to get the value of the characteristic selection in package.
I mean in the planning level I will have the user exit variable that restrict the planning area and, his function module, need to read, at runtime, what is the value of the characteristic CRM Sales Organization restricted in package by CRM.
So I don't have any idea to which BPS internal table I have referred to in my funcion module to catch the value of the CRM Sales Organization dinamically filtered by CRM.
Many thanks,
Alessandro

How to Broadcast Control Query based on User Exit Variable

Hi Gurus,
How to Broadcast dashboard based on Control Query based on User Exit
Variable to different users via mail in BW 3.5 version. Any document or
steps to achieve this will be very helpful.
Regards
Vishwanath

Hi Surendra,
Thanks for the reply and your suggestion. It will be great if you can help me to answer the below:
1) What exactly we mean by Control Query - Any example will be very helpful
2) As you mentioned, yes the user exist to be written will be for user-exit variable for dynamic period selection - An Example on how to create this will be helpful
3) Once the above variable is created, what are the steps to include this variable in the Bex Query?
4) Once all the queries to be used in dashboard are implemented with the exit variable, how to create a variant to be used in Broadcasting?
5) How and where to configure the email recipients (to whom this dashboard will be sent via mail)?
6) How to set up the BW broadcaster in BW 3.5 using the control query ?( My question is though we have to send the dashboard to the users, which has multiple queries, how a single control query with variant will help us).
Awaiting your reply.
Thanks and Regards
Vishwanath

How to select distinct values from a table when it has composite primary ke

Hi
I have the requirement like , I need to select distinct one column values from the table which has composite primary key. How to acheive this functioinality using view object.
Eg : Table 1 has col1 and col2, col3
col1 col2 col3
1 A NA
1 B NA
2 A NA
3 C NA
2 D NA
primary key (col1,col2)
I have to select distinct col1.
Thanks

Hi
I got the solution for above. By Creating the read only view object we can acheive this.
thanks

User exit variable I_STEP=1 does not show default value WebI selection scr

Hello,
We have a BW query with a user exit variable. We have written user exit code under I_STEP = 1 so that the default value for the field is displayed on the selection screen to the user. Works very well on the BW side.
We based a universe on top of the query and then created a WebI report.
When the WebI report is executed the default value is NOT seen on the selection screen,
Note:
1. If the user exit variable is optional and we execute the report, the default value is NOT seen on the selection screen. However if the report is executed without entering any value for the field the logic under I_STEP = 1 is picked up and the report gets the correct output
1. If the user exit variable is mandatoryand we execute the report, the default value is NOT seen on the selection screen. The user now has to enter the value for the field.
The scheduled reports will work in case of optional user exit variable.
However this amounts to loss of functionality.
Is this a known bug?
Is there a way to display default values based on user exit variables on the WebI selection screen?
Kindly advice. Btw we are on XI 3.1 SP3
Rgds
Edited by: Anup Deshmukh on Jun 29, 2010 11:13 PM

OSS Note 1285993 - "Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe" deals with this issue and has deemed it out of scope for XI 3.1 SP3.
Rgds

Value for user-exit variable is invalid

Hi Gurus,
My Value for a Fiscal Year Prd returns a invalid value for the 12th month of each year( for Example 12/2004, returns the error "Value 200313 for User-exit variable is invalid.
This is the code that is being used.
*Rolling 12 months for entered month
when 'ZCALM12'.
      clear: v_mth, v_yr.
      REFRESH E_T_RANGE.
      CLEAR L_S_RANGE.
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
               WHERE VNAM = 'ZCALMON'.
        exit.
      endloop.
      v_yr = LOC_VAR_RANGE-LOW+0(4) - 1.
      v_mth = LOC_VAR_RANGE-LOW+4(2) + 1.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'BT'.
      concatenate v_yr v_mth into L_S_RANGE-LOW.
      L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
      APPEND L_S_RANGE TO E_T_RANGE.
Thanks in Advance.

Hi Ravi,
when 'ZCALM12'.
clear: v_mth, v_yr.
REFRESH E_T_RANGE.
CLEAR L_S_RANGE.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZCALMON'.
exit.
endloop.
<b>-->> Here, you are not checking any thing.</b> <i>On which logic you are reducing year by one and increasing month by 1..?</i>
v_yr = LOC_VAR_RANGE-LOW+0(4) - 1.
v_mth = LOC_VAR_RANGE-LOW+4(2) + 1.
-->><i>IF month is 200512 you will get output from above code is :</i> please check.
v_yr = 2005 - 1 = 2004
v_mth = 12 +1 = 13.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
concatenate v_yr v_mth into L_S_RANGE-LOW.
L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
APPEND L_S_RANGE TO E_T_RANGE.
Try to debug the code by keeping break point after When. and execute the report, you will be debugging mode.
Hope it Helps
Srini

How to get the values from html:select? tag..?

i tried with this, but its not working...
<html:select styleClass="text" name="querydefs" property="shortcut"
             onchange="retrieveOptions()" styleId="firstBox" indexed="true">
<html:options collection="advanced.choices" property="shortcut" labelProperty="label" />
</html:select>
                    <td align="left" class="rowcolor1">
                    <script language="javascript" type="text/javascript">
                          function retrieveOptions(){
                         var sel = document.querydefs.options;
                         var selectedOption = sel[sel.selectedIndex].value;
                         document.write(selectedOption);
                       </script>

<td align="left" class="rowcolor1">
                    <script language="javascript" type="text/javascript">
                          function retrieveOptions(){
                         var sel = document.querydefs.options;
                         var selectedOption = sel[sel.selectedIndex].value;
                         document.write(selectedOption);
                       </script>This java script is not working at all..its not printing anything in document.write();
This is code..
<td class="rowcolor1" width="20%">
<html:select styleClass="text" name="querydefs" property="shortcut"
                         onchange="retrieveSecondOptions()" styleId="firstBox"
                         indexed="true">
                         <html:options collection="advanced.choices" property="shortcut"
                              labelProperty="label" />
                    </html:select>i tried with this also. but no use..i'm not the getting the seleced option...
function retrieveOptions(){
firstBox = document.getElementById('firstBox');
                         if(firstBox.selectedIndex==0){
      return;
    selectedOption = firstBox.options[firstBox.selectedIndex].value;
}actually , how to get the values from <html:select> ...?
my idea is to know which value is selected from the combo box(<html:select> ) if that value is equal some string i have enable a hyperlink to open a popup window

How can I select several emails from 3900 on my 5c and delete the rest easily

How can I select several emails from 3900 on my 5c and delete the rest easily

We'll I don't think there's a easy way to delete a lot of emails besides deleting all of them. To delete all of them click on inbox them edit then "mark all" then trash/delete. Other than that you will have to specifically deleted the ones you want to delete.

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

How to update value stored in a table when we select a value from a list

In my jsp page i have given
<html:select property="function" >
     <html:option value="select">Select Actions</html:option>
<html:option value="open">Marks as open</html:option>
<html:option value="closed">Marks as closed</html:option>
</html:select>
I am using lookup dispatch action in action class
public class LoginAction extends LookupDispatchAction{
protected Map getKeyMethodMap() {
          Map map=new HashMap ();
          map.put("open","open");
          map.put("closed","closed");
          return map;
public ActionForward open(ActionMapping mapping, ActionForm form, HttpServletRequest request, HttpServletResponse response) throws Exception {
          System.out.println("success");
          return mapping.findForward("success");
     public ActionForward closed(ActionMapping mapping, ActionForm form, HttpServletRequest request, HttpServletResponse response) throws Exception {
          System.out.println("success");
          return mapping.findForward("success");
but when i select a value from the list,the corresponding action is not occuring.What should i put in my code??

Put your code between the code tags, it makes it so much easier to read.
To do that, just highlight your code and click on the "code" found between " and the circled ?.
From what I can read of your code I don't even see a table or a list, so i have no idea what you are trying to do. You probably need to show more code.
JSG

How to get the values from popup window to mainwindow

HI all,
   I want to get the details from popup window.
      i have three input fields and one search button in my main window. when i click search button it should display popup window.whenever i click on selected row of the popup window table ,values should be visible in my main window input fields.(normal tables)
   now i am able to display popup window with values.How to get the values from popup window now.
   I can anybody explain me clearly.
Thanks&Regards
kranthi

Hi Kranthi,
Every webdynpro component has a global controller called the component controller which is visible to all other controllers within the component.So whenever you want to share some data in between 2 different views you can just make it a point to use the component controller's context for the same. For your requirement (within your popups view context) you will have have to copy the component controllers context to your view. You then will have to (programmatically) fill this context with your desired data in this popup view. You can then be able to read this context from whichever view you want. I hope that this would have made it clear for you. Am also giving you an [example|http://****************/Tutorials/WebDynproABAP/Modalbox/page1.htm] which you can go through which would give you a perfect understanding of all this. In this example the user has an input field in the main view. The user enters a customer number & presses on a pushbutton. The corresponding sales orders are then displayed in a popup window for the user. The user can then select any sales order & press on a button in the popup. These values would then get copied to the table in the main view.
Regards,
Uday

How to select several values from a user exit variable in a planning folder

Similar Messages

Maybe you are looking for