How to select two variables from recordset
Parse error: parse error in
C:\wamp\www\dotweb\access\agreement_handbook.php on line 72
I get the above error when I try to run the above page. I
don't know how to select one variable which is the compid that I
get from the url and a specific name from another column called
documentname. I know that this is a very simple thing and I could
do it just fine with ASP pages, but this is my first time with PHP.
Please help!!!
On Tue, 17 Feb 2009 20:56:30 +0000 (UTC), "kmlohr"
<[email protected]> wrote:
> $query_rsAgreements = sprintf("SELECT * FROM agreements
WHERE CompId = %s and
>DocumentName = "handbook"",
GetSQLValueString($colname_rsAgreements, "int"));
Change the above line to:
$query_rsAgreements = sprintf("SELECT * FROM agreements WHERE
CompId = %s
and DocumentName = 'handbook'",
GetSQLValueString($colname_rsAgreements,
"int"));
Gary
Similar Messages
-
How to fill two variables from url parameter?
Hello friends,
the following case should be discussed:
The URL restricts the values for 0CALMONTH (e.g. FILTER_IOBJNM=u20190CALMONTHu2019 FILTER_VALUE_LOW_EXT=u20191u2019 FILTER_VALUE_HIGH_EXT='2').
Is ist possible to fill variable VAR01 with the LOW-value and VAR02 with the HIGH-value ?
In our case we want to show in column 1 the value of the actual month, the column 2 the value of the month before. The selection must be given by URL - it is externally generated.
We think about customer-exit solutions (CMOD EXIT_SAPLRRS0_001 for variables), but found not yet any working solution.
Any ideas?Hi Durgesh,
we talk about a portal solution, where SAP ERP and SAP BW broadcast data. In this case the URL is generated by SAP ERP for SAP BW query.
But the URL restricts the data for the complete SAP BW query, so we cannot restrict in the URL for the actual month only - then the month before is not in the BW-query result (the month before would be completely out of range).
If we restrict in the URL two months, we need to "break" the URL-values into two variables.
Regards,
Matthias
Edited by: Matthias Krause on Oct 25, 2011 9:30 AM
Edited by: Matthias Krause on Oct 25, 2011 9:32 AM -
How 2 read two files from 2 diff. directories, using single adapter
How 2 read two files from 2 diff. directories in same system, using single file adapter.
you can use advanced selection for source file
see
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm -
How to refresh ODI variables from file
Hi,
I followed the fillowing links to implement the dynamic file parameter passing in to the resource name of a datastore.
part-1. http://odiexperts.com/how-to-refresh-odi-variables-from-file-%E2%80%93-part-1-%E2%80%93-just-one-value
part-2. http://odiexperts.com/how-to-refresh-odi-variables-from-file-%e2%80%93-part-2-%e2%80%93-getting-all-lines-once-at-time
For me first part is working fine where as in second part i made canvas looks like
Vlinevariable(refreshing variable)------------------dyanamicfile(refereshing variable)--------------------- interface.
Interface looks like Flatfile to db ,km's are lkm file------sql and ikm is sql incremental update
Vlinevariable is working fine where i am getting numbers in sequence manner to assign in to code of dynamicfile variable and in dynamicfile is not taking that value in to that code and causing session failed.
The code which i put in a refreshing code of dynamicfile is followed below
select samplefile1_csv C1_SAMPLEFILE1_CSV
from TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=code_generationSNP$CRLOAD_FILE=C:\file/my_test_file.txtSNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=1SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=samplefile1_csvSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRACTION_ON_ERROR=0SNP$CR$$SNPS_END_KEY*/
For the firstrow the number has to get from vlinevariable where in my case not working .
In session while loading the interface (load data) i am getting error like
message-------------- ODI-1227: Task SrcSet0 (Loading) fails on the source FILE connection file_tgt.
Caused By: java.sql.SQLException: File not found: C:\file/
at com.sunopsis.jdbc.driver.file.FileResultSet.<init>(FileResultSet.java:160)
at com.sunopsis.jdbc.driver.file.impl.commands.CommandSelect.execute(CommandSelect.java:57)
at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
at com.sunopsis.jdbc.driver.file.FilePreparedStatement.executeQuery(FilePreparedStatement.java:131)
at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java:602)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeQuery(SnpSessTaskSql.java:3078)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java:571)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2815)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:619)
source code is select a C1_A,
b C2_B
from TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=sample1SNP$CRLOAD_FILE=C:\file/#PROJECT1.FILENAMESNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=0x002cSNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=1SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=aSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=1SNP$CRLENGTH=50SNP$CRPRECISION=12SNP$CRACTION_ON_ERROR=0SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=bSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=2SNP$CRLENGTH=50SNP$CRPRECISION=12SNP$CRACTION_ON_ERROR=0SNP$CR$$SNPS_END_KEY*/
target code insert into STAGING.C$_0SAMPLE1
C1_A,
C2_B
values
:C1_A,
:C2_B
KIndly help me and thanks in advance.ODI is complaning it cannot locate the file. Try replacing the '/' character with a '\' after file in the designated filepath.
-
How to compare two rows from two table with different data
how to compare two rows from two table with different data
e.g.
Table 1
ID DESC
1 aaa
2 bbb
3 ccc
Table 2
ID DESC
1 aaa
2 xxx
3 ccc
Result
2Create
table tab1(ID
int ,DE char(10))
Create
table tab2(ID
int ,DE char(10))
Insert
into tab1 Values
(1,'aaa')
Insert
into tab1 Values
(2,'bbb')
Insert
into tab1 Values(3,'ccc')
Insert
into tab1 Values(4,'dfe')
Insert
into tab2 Values
(1,'aaa')
Insert
into tab2 Values
(2,'xx')
Insert
into tab2 Values(3,'ccc')
Insert
into tab2 Values(6,'wdr')
SELECT
tab1.ID,tab2.ID
As T2 from tab1
FULL
join tab2 on tab1.ID
= tab2.ID
WHERE
BINARY_CHECKSUM(tab1.ID,tab1.DE)
<> BINARY_CHECKSUM(tab2.ID,tab2.DE)
OR tab1.ID
IS NULL
OR
tab2.ID IS
NULL
ID column considered as a primary Key
Apart from different record,Above query populate missing record in both tables.
Result Set
ID ID
2 2
4 NULL
NULL 6
ganeshk -
How to select the data from a Maintainance View into an internal table
Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban -
How to select multiple values from a listbox
Hi,
I have a list box on my UI which is not allowing me to select multiple values
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving error
When i drag & drop the component i am unable to drop it as a multi select list box that option is not coming.
I am working on Jdev 11.1.1.3 and I am using ADF/BC components
How to select multiple values from a listbox ?
Thanks,Hi,
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving errorank
And what is the error ?
Frank -
How to delete multiple variables from the variables list
Hello,
Iam using FrameMaker 9.0. Is there a way I can select multiple variables from the book and delete them together.
Thanks,
CP.NO in FM9. Take SQUIDDS TOOLBOX the free tool: 'Formats'
'Formats' is a very helpful tool for 'deleting' paragraph formats, character formats, cross reference formats, table formats, color definitions and variables.
You can delete unused one or all formats of selected. For paragraph and character you can also decide to 'add new one in catalog'.
-Georg -
How to select multiple values from the parameters in BI Publisher report
How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...
Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj -
How to select multiple values from the Parameters in the concurrent program
How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?
I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc. -
How to select two things at the same time ?
Hey guys, i'm French and I need your help !
I'm working everyday on iWork and especially Pages.
How to select two parts of a text at the same time ?
Before we only need to select one, to press the "cmd" button and then to select another part. It doesn't work anymore!
Thanks for you help
and sorry for the mistakes !Hey guys, i'm French and I need your help !
I'm working everyday on iWork and especially Pages.
How to select two parts of a text at the same time ?
Before we only need to select one, to press the "cmd" button and then to select another part. It doesn't work anymore!
Thanks for you help
and sorry for the mistakes ! -
How to Select a value from DropDownByIndex -Urgent
Hi All,
I have dropdownbyindex UI elements in my Views, I get values from BAPI. When click records in a table, It goes to another view to display full record. Here i have dropdownbyIndexes So it should select one of appropriate value in dropdownbyindex based on record(Value) in table.
Example:
<u><i><b>In Table View</b></i></u>
id title status priority
10000 webDynPro New Low
<i><u><b>Detail View:</b></u></i>
id 10000
title webDynPro
Status New [New,Old,Open,Closed]---DropDownbyIndex
Priority Low [High,Low,Medium]---DropDownByIndex..4m BAPI
How to select Appropriate Values from DropdownbyIndex. if any one has sample code, that will be helpful.
Note: I am using Model Nodes
Thanks and Regards
Ravi GollaHi Ravi,
In details view, you will have corresponding context node created for Status and priority dropdown fields.
Let suppose, context node for Status is, StatusNode.
value attribute inside this is,
StatusNode
|_ StatusAttrib
Now, you need to write following code to set l_status ="LOW" value in it.
wdContext.nodeStatusNode().moveFirst();
for(int i=0; i<wdContext.nodeStatusNode().size(); i++)
if(wdcontext.currentStatusNodeElement().getStatusAttrib().equals(l_status)
wdContext.nodeStatusNode().setLeadselection(i);
break;
wdContext.nodeStatusNode().moveNext();
write same code for priority also.
Let me know if it is not working with you.
regards,
Bhavik -
How to select multiple records from a TREE in the table
HI,
I have a tree structure which is in the table.When I open the node of the tree,all the subnodes are coming as one-one records in the table.I want to slect multiple record from this table.I applied onLeadSelect for this table,I can select only 1 record from the table.
Can any one plz suggest me how to select multiple records from the table so that I can get all the data of those selected record.
Regards
-SandipRashmi/Kukku,
First of all, Thanks for your help!
Is there any other way in which we can access tables other than using BAPIs or RFCs?
In my case, there is a table structure which has to be updated with values after validating a key. i don't think there is any RFC available now. do i need to create bapi/rfc for that?
Krishna Murthy -
How to select the vendor from the source list in the PO(me21n) screen ??
Hi
How to select the vendor from the source list in the PO(me21n) screen.
Is there any Sources of Supply tab in the PO just like we have in the PR.
I don't want a PO raised from a PR which has got the Vendor assigned to it already.
Or the SAP doesnot provide the option of Source list/Assign source/Sources of Supply .....in the PO.
Kindly replyThere is not any facility available for Source Determination in PO. Only you can select the line item and click Menu Environment > Source List and view the list of sources available for the material but you can not chooss and assign. If you wan to assign the vendor then change the vendor already entered in PO and put the desired vendor.
-
How to select alternate entries from the database table
Hi Experts,
can u help me, how to select alternate entries from the database table.
ThanksAs there is no concept of sequence (unless there is a field specifically included for the purpose), there is no meaning to "alternate" records.
What table do you have in mind, what data does it hold, and why do you want alternate records?
matt
Maybe you are looking for
-
How do I connect my macbook pro to my tv?
how do I connect my macbook pro to my tv?
-
Why I can no longer see my speakers in AirPlay as I could recently?
A week or so ago I could access music on my Apple Express speakers via AirPlay. Not now, alas! Recent changes: (1) Updated to iOS 8.02. (2) For the first time, I used AirPlay to view photos on AppleTV on a TV screen. Currently AirPlay on my iPad disp
-
New SpryWidget .CSS for a New Page
I have the whole spry arsenal of files on a website in a separate folder. I am already using several widgets and functions from that and among others also a "spry collapsible panel" widget on one of the pages. Now, I would like to use it once again o
-
Cisco routers have two Dyndns providers. Since Dyndns.com is no longer free, TZO too. Do Cisco make an Upgrade with new free dyndns providers (like no-ip.com)?. I have WRP400 router and BEFW11S4. Must We Pay for DynDns with Cisco/Linksys
-
IPod video... what can safely remove surface scratches?
Ok, I know this is a really stupid question, but I just paid $400.00 for a 60 gig iPod video and the slipcover they gave me w/ the iPod has really scratched up my iPod. What can I use on the iPod that will safely remove the surface scratches? Another