How to send different XML using static URL

Hi Guys,
I have the problem, my legacy system sends xml messages to XI by HTTP, my legacy system support only a static url http://host:8000/sap/xi/adapter_plain
I have more than one interface, how did u fix this problem. I need to send xml to XI with out defining INTERFCAE on URL.
can anybody explain how to handle this issue, help would be really appreciated.
Thanks,
k s reddy

You have two options:
1. use enhanced receiver determination (but for that, you'll have to use java mapping from input message to receivers), it will only work from 3.0 SP16 / 7.0 SP7;
2. use a generic interface, where you define all possible message type tags with occurrence 0...1.
Regards,
Henrique.

Similar Messages

  • [HTTP Sender]How to send different XML using static URL

    Hi all,
    I have a problem, my legacy system send XML messages to SAP XI by HTTP, I know that I need to use HTTP Sender adapter, the problem is that legacy system support only a static URL. I have more than one interface, how could I fix this problem?
    Can I send the XML message to SAP XI without define INTERFACE on URL? How can I handle this?
    Thank in advance,
    Daniel Torres

    Hi Srinivas,
    The legacy system is a java application, that send XML messages to SAP XI server using HTTP protocol. So I just ask to legacy system team to change the application to add <b>server</b>, <b>namespace</b> and <b>interface</b> attributes to the URL querystring.
    So for each XML message you should especify mesage interface that it belongs to. You do it by especifying on URL as message atribute for exemple:
    HTTP://[SAPXISERVER]:80[SYSTEM ID]/sap/xi/adapter_plain?service=[BS SERVICE]&namespace=[MESSAGE INTERFACE NAMESPACE]&interface=[MESSAGE INTERFACE]
    So if you have for example information belows:
    <b>MESSAGE INTERFACE</b> = MI_MYMESSAGEINTERFACE_IB
    <b>MESSAGE INTERFACE NAMESPACE</b> = urn:teste:mymessageinterface
    <b>SERVICE</b> = MY_LEGACY
    <b>SYSTEM ID</b> = 10
    <b>SAPXISERVER</b> = MYSAPXI
    Your url should looks like: http://MYSAPXI:8010/sap/xi/apadter_plain?service=MY_LEGACY&namespace=urn:teste:mymessageinterface &interface=MI_MYMESSAGEINTERFACE_IB
    You should have a different message interface for each XML that you send to SAP XI.
    Message was edited by:
            Daniel Torres
    Message was edited by:
            Daniel Torres

  • How to send/receive XML using JSP

    Hi,
    I'm new to all this JSP/XML stuff so apologies if this is trivial.
    I'm trying to send an XML file via HTTP POST using JSP. Anyone know how to do this?
    Once the XML has been sent, how do you use JSP to request the XML file? I've figured out how to parse it already.
    Also, is it possible to call xsql directly within JSP?
    Thanks!

    I'm trying to send an XML file via HTTP POST using JSP. Anyone know how to do this?The question is, does anybody understand what you mean by this. Let me take a guess. You want to upload an XML file to a server. If this guess is right, then the answer is don't use JSP to do that. JSP is for generating output to be sent to a client. Use a servlet to handle an upload. And you don't need to write it yourself, there are already several file-upload servlets available on the web.
    Second guess: you have a POST request that asks your server to send an XML file back to the client. If it's a static XML file you don't need a JSP or a servlet or anything, just let your web server handle it just like any other static file. If it's dynamically generated then there's an answer worth giving, but I doubt that this is your question. But if it is, let us know.

  • How to send an email using XML Publisher

    Can any body help me how to send an email using XML Publisher.
    Regards,
    Suresh

    Sorry ,
    when a http://blogs.oracle.com/xmlpublisher/newsItems/departments/documentDelivery
    this it show this not answer the question.
    Thanks
    Welcome to Oracle Blogs
    Welcome to the Oracle blogging community, where Oracle executives, employees, and non-employees exchange views about customer requirements and best practices.
    We're sorry, the weblog you requested cannot be accessed.
    - You may not have the necessary permission for access the weblog.
    - This weblog does not exist.
    You may wish to try again using one of the tools below.
    - Check the URL and contact your System Administrator for access.
    - Or click here to go back to Oracle Blogs homepage.
    Powered by
    Movable Type and Oracle
    The views expressed on this blog are my own and do not necessarily reflect the views of Oracle. Terms of Use

  • How to emabed BI Publisher report  to a different application using GO URL

    Hi all,
    How to emabed BI Publisher report to a different application using GO URL.
    I put the BI Publisher report in dashboard and create a go url but the problem is it is showing top header and all dashboard names present in my dashboard.
    I want to show only report.
    If we do a GO url of answers requst it shows only report . Same way can we do for BI publisher request.
    Thanks

    10g or 11g?
    for any you can get the link from BIP report properties. and use that link

  • How do you pass XML as a URL param?

    How do you pass XML as a URL param?
    Thanks!

    I don't know why I wasn't thinking about this when I made my
    last post. If they're pasting some XML into a form, that's one
    thing. But if they need to send XML to your site from their own,
    you can setup a Coldfusion Component (CFC) as a Web Service to
    accept XML through a WSDL call.
    Check out the
    Coldfusion
    Developers Center for
    articles
    on creating web services

  • How to connect my ipad using static ip

    How to connect my ipad using static ip?
    Using Netgear Router.

    Go to Setting > General > Network > WiFi > Then tap the blue icon next to your network, from here you can setup a static IP on your internal network.

  • How to send meeting invites using Exchange Email Account

    Does anybody know how to send meeting invitations using the 3.0 software update?
    My corporate email is set up with an Exchange ActiveSync account, but I can't figure out how to send meeting invites?
    Is it a function solely of the iPhone 3.0 OS, or is it dependent on the Exchange setup.
    Any insight would be appreciated.
    David

    That is what I was afraid of...the good thing is that is the only feature (besides battery life) that I miss from my Blackberry. Thanks.

  • How to send secure email using JavaMail

    Hi, anyone out there know how to send secure email using Java Mail? Greately appreciated.

    For starters, if you have not already done so, read about it in the JavaMail design specifications.
    Search for Message Security in the said document.

  • How to send CC email using SO_DOCUMENT_SEND_API1

    Hi,
       How to send CC email using SO_DOCUMENT_SEND_API1.  Any sample code is very much appreciated.
    Cheers

    Please check In this function there is a flag in RECEIVERS table for sending mail as COPY or BLIND COPY
    a®

  • How to send sms,Email using java

    how to send sms,Email using java

    Hi,
    There are many sms gateways that have their own api to send sms. You can use them for sms. (They will charge you for the sms!!!)
    Moderator edit: Link removed
    Thanks
    Edited by: PhHein on 20.10.2010 16:11

  • How to send picture message using J2ME sms APIs?

    Hi,
    I experiment with SMS APIs, i successfully send simple text message. now i want to send picture message, how to send picture message using J2ME APIs.
    please guide me.
    guna.

    I experienced in coding sending and receiving sms in J2ME. Besides, I also esperienced in coding reading a binary file in a applicaition jar. But I never done these both together. Hence Im not sure it works or not. Below is the example to open and read a binary file:
    InputStream oInputStream = getClass().getResourceAsStream( "/picture.png" );
    if(oInputStream == null) {
    //File does not exist;
    throw new Exception("File not found");
    //Read the binary file and copy it to a byte array
    byte[] abyPicture = new byte[oInputStream.available()];
    oInputStream.read(abyPicture );

  • How to generate Webservices.xml using tool in Sun One App Server?

    How to generate Webservices.xml using tool in Sun One App Server?

    Hi,
    The build.xml file should be in a directory from where
    you are running the asant command.
    To resolve the common.xml file not found error,
    open your build.xml and check from which location the common.xml file is incuded.
    In the sample application it is four directories above
    the directory where build.xml is located.
    You can copy the common.xml in the current directory and then change the following in your build.xml
    <!ENTITY include SYSTEM "../../../../common.xml">
    to <!ENTITY include SYSTEM "common.xml">
    Hope this helps.
    Get back in case you have more issues

  • How  to  send a  XML document using HTTPurlconnection as a  post

    Dear Guru's ,
    I am trying ot send a xml document to a httpserver
    using httpurl connection ..
    It works fine locally ..but over the net it is throwning an exception ..java.io.interupted exception ..
    any ideas .. please send me the code if possible
    Thanks in advance

    Are you opening the input stream or querying the reply headers after writing to the output stream? It's doing one or the other that actually triggers the send.

  • How to send different value of presentation variable in GO URL??

    Hi there,
    I'm using GO URL to send presentation Variable (d_pv) to filter other report on 'day' column.....
    '(a href = http://server/analytics/saw.dll?GO&path=/shared/BI%20Reports/Ki1/KPIs%20Detail%20Priority%203%20Shipped&Action=Navigate&p0=1&p1=eq&p2="Time".Day&p3=@{d_pv})SHIPPED(/a)'
    This is working fine. But my goal is to filter the other report using previous day of the value of d_pv (eg. if d_pv value is '2010-04-27' , I need to filter other report using '2010-04-26')
    I couldn't find to pass one day back value of presentation variable using go url.
    Please Help..
    Edited by: bob123 on Apr 28, 2010 10:15 AM

    I'd say use TIMESTAMPADD(SQL_TSI_DAY,....,1) and use pass your pres variable to this column.
    so when you pass 28/04/2010 to the target report day+1 column, it will show 27/04/2010 data.

Maybe you are looking for