How to send email via PL/SQL

Hi guys,
I have already read several topics about that subject. However, I haven't understood well. It is very complicated. Could somebody explain step by step or show a detail source about sending email through pl/sql?
Thanks alot.

876928 wrote:
I have tried it, but I get this error.
ora-29278 smtp transient error 421 service not available
By the way I use gmail, I don't know how I change my settings? I mean Ain't I suppose to type my mails pass and username ?
gmail won't forward your SPAM.
you need to utilize local Mail Transport Agent that is explicitly configured to relay messages from DB Server

Similar Messages

How to send emails from HANA SQL Console

Hi,
Please guide how to send mail from HANA Studio SQL Console.
Is there any standard procedure in Hana Studio to send Mail( e.g. in MS SQL "sp_send_dbmail" Procedure)

Hi Preethi,
Please go through the attached link:
How to send emails from HANA
Regards,
Krishna

How to send email using pl/sql containing the result set as the msg body

Hi.. im using Pl/SQL code to send emails to the users from a dataset that is obtained in a databse table. i have used utl_smtp commands to establish the connection with the smtp mail server. im stuck at the logic when i have to include the message body which is actually the result set of a table.. For instance
IF (p_message = 0) THEN
UTL_SMTP.write_data(l_mail_conn, 'There is no mismatch between the codes' || UTL_TCP.crlf);
ELSE
UTL_SMTP.write_data(l_mail_conn, 'The missing codes are ' || UTL_TCP.crlf);
for s in (select * from temp)
loop
UTL_SMTP.write_data(l_mail_conn, ' ' ||s || UTL_TCP.crlf);
end loop;
END IF;
UTL_SMTP.close_data(l_mail_conn);
UTL_SMTP.quit(l_mail_conn);
END;
***p_message is a prameter passed to this procedure..
Can i obtain the result in the form i have it in my table. which has three columns. I want to display the three columns as it is with teh records. ?

this is not related about this forum but you can use below,
CREATE OR REPLACE PROCEDURE SEND_MAIL (subject varchar2,mail_from varchar2, mail_to varchar2,mail_msg varchar2)
IS
mail_host varchar2(30):='XXXXX';
mail_conn utl_smtp.connection;
tz_offset number:=0;
str varchar2(32000);
BEGIN
begin
select to_number(replace(dbtimezone,':00'))/24 into tz_offset from dual;
exception
when others then
null;
end;
mail_conn:=utl_smtp.open_connection(mail_host, 25);
utl_smtp.helo(mail_conn,mail_host);
utl_smtp.mail(mail_conn,'[email protected]');
utl_smtp.rcpt(mail_conn,mail_to);
utl_smtp.open_data(mail_conn);
utl_smtp.write_data(mail_conn,'Date: '||to_char(sysdate-tz_offset,'dd mon yy hh24:mi:ss')||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,'From: '|| mail_from ||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,'To: "'|| mail_to ||'" <'||mail_to||'>'||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,'Subject: '||subject||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,utl_tcp.crlf);
utl_smtp.write_data(mail_conn,replace_turkish_chars(mail_msg)||utl_tcp.crlf);
utl_smtp.write_data(mail_conn,utl_tcp.crlf);
utl_smtp.close_data(mail_conn);
utl_smtp.quit(mail_conn);
END;
Edited by: odilibrary.com on Jun 12, 2012 5:26 PM

How we send email from pl/sql

i want 2 send mail from pl/sql??
plz tell me bout d coding related to this.
i really appreciated ur help.

Try the pl/sql code below.
create or replace PROCEDURE send_test_message
IS
mailhost VARCHAR2(64) := '191.168.251.207'; -- ip address of the mail server.
sender VARCHAR2(64) := '[email protected]';
recipient VARCHAR2(64) := '[email protected]';
mail_conn utl_smtp.connection;
BEGIN
mail_conn := utl_smtp.open_connection(mailhost, 25);
utl_smtp.helo(mail_conn, mailhost);
utl_smtp.mail(mail_conn, sender);
utl_smtp.rcpt(mail_conn, recipient);
utl_smtp.open_data(mail_conn);
utl_smtp.write_data(mail_conn, 'Your leave is Cancelled due to xyz...reason ' || chr(13));
utl_smtp.write_data(mail_conn, 'This is line 2.' || chr(13));
utl_smtp.close_data(mail_conn);
utl_smtp.quit(mail_conn);
EXCEPTION
WHEN OTHERS THEN
-- Insert error-handling code here
NULL;
END;

Sending emails via Forms or pl/sql

Does anyone know how to implement UTL_SMPT for sending emails via Forms or pl/sql ?
If not, any other suggestions for sending a newsletter-type of email to a fairly large list of people ?
Thanks,
Bob

If your are using microsoft windows you can achieve this by using MAPI SESSION & MAPI MESSAGE ActiveX Control.
These controls are not installed in windows by default, you have to install these from some cd like visual basic, visual studio etc.
Zulqarnain

HT4061 since downloading IS07 I can no longer send emails via hotmail on my Iphone 5

Since downloading IOS7 to my iphone 5 I can no longer send emails via my hotmail account - receiving ok though. How can I fix this?

Chris
thanks to your prompting, i found another mail icon that when touched requested a password. i now can send photos once again
woohoo
thanks again
bpb

How to send mail in PL/SQL?

Hi:
I want to send email in PL/SQL in linux.
Could anybody tell me how to do it?
By the way,what is DBMS_MAIL? Can I use
it and how to use?
Thanks!
BEST REGARDS!
Sherwin
null

There's also a really nice discussion on this over at askTom
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:255615160805
Justin

Gmail taking ages to send email via mail app

I bought a MacBook air yesterday and set up my gmail account on the mail app. Everything seemed to be working okay at first but now it's takkng at least five minutes to send a plain text email, one email I tried sending last night didn't send until this morning! I tried changing the SSL port to 25, 465 and 587 not only do they not work but then it stops my mail from moving into the folders or trash, they move and then go back to my inbox.
Please help!

Stephen Schulte2 wrote:
When I am in a hotel out of town or overseas- or just anywhere where I don't have my home ISP - how can I not only RECEIVE but also SEND eMail via my Mail program?
If your ISP is like mine, it authenticates you for outgoing e-mail by being able to determine that you're accessing the Internet from within their network. If your ISP is so configured, they'll offer the ability to authenticate to their SMTP server with a password. My ISP does not.
However, MobileMe does provide its own authenticating SMTP server that you should be able to use from anywhere. Try an SMTP server of smtp.mac.com (smtp.me.com will probably also work) with settings of "Use default ports", "Use Secure Sockets Layer (SSL)", and "Authentication" by password, your "User Name" the part of your MobileMe ID before the "at" sign, and your password your MobileMe password.
For non-MobileMe outgoing e-mail, you'll need to locate an SMTP server that you can use.
Also: Anyway to attach more than 1 file (say photo) at a time using MobileMe and my mail account? For 22 small photos do I have to hit attach each time? I can't seem to select the folder they are in and get all 22 to attach...
I haven't tried that, but I would expect to have to attach them one at a time.

Cannot receive/send emails via Mail on Mac using 10.6.8, keeps asking for password, very frustrating. Any ideas please? Regards

Cannot receive/send emails via Mail on Mac using 10.6.8, keeps asking for password, very frustrating. Any ideas please? Regards

One more time, iCloud mail accounts are .me, .mac and .icloud. New ones are only .icloud.
iCloud mail is a standard Imap account that can be used with any mail client in existence. But You are talking about the ability to automatically setup an iCloud account in mail, which did not exist until 10.7.2.
You can use password or token authentification with iCloud mail (in Mail) it is your choice.
Set the account manually, set it as Imap, use imap.mail.me.com (no P number) for the incoming email and smtp.mail.me.com as the outgoing server.
The full settings (ports and security) are here. Use them and it will work, regardless of domain (mac, me and icloud addresses all use the same settings.
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud.
For more information on how to use this information with your email application, consult your application's documentation.

How to send emails from of pdf's generated by oracle reports

I have several pdf documents , I want to email those pdf's . Please let me know how to send emails from oracle reports .
Thanks,
Previn

I have integrated Oracle Reports with Oracle Portal and used the scheduling feature via portlets. We have reports that run every monday morning for management. For more info go to:
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
OR
I think if you set destype=mail, desformat=PDF, and desname=[email protected] that should also do the trick.
Just be sure that you have put your mail server's IP address in the rep_<machine_name>.conf file located in your <oracle_home>/reports/conf directory. If this is not set up, the mail feature won't work.
Martin

Cannot send email via Hotmail through port 587 with Secure Connection (SSL) set

Something is blocking my attempts to send email (with Outlook Express) via my hotmail.com account. The error I receive is as follows:
Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'Hotmail', Server: 'smtp.live.com', Protocol: SMTP, Port: 587, Secure(SSL): Yes, Error Number: 0x800CCC0F
When Hotmail.com first changed over to a POP3 server (Sept 2009), I could send emails through them using port 587, which they require. But then something happened, with no changes on my part, to disable my ability to send.
I have checked and rechecked my Outlook Express account settings. I can send email through another third-party mail account (at 1&1 Internet.com) using port 587, which does not require setting SSL to yes. I can also ping the Hotmail SMTP server via port 587 and receive a response from it.
I connect to Verizon DSL via a Westell 327W modem/router. Clearly it is not blocking port 587 without SSL. Does it have the capability to block SSL traffic? Or is the Verizon server the culprit, not allowing emails to be sent via Hotmail.com?
Two different computers on my LAN have the same problem sending emails via Hotmail.com. I have tried everything the Hotmail people have suggested; at this point they think it is an ISP problem, hence this post. This problem doesn't make sense to me and is driving me crazy. Can anyone help me with this?
Thanks.

You can still have your reply address set to your hotmail address. And you don't have to really remember to do anything. Configure your client for the HOTMAIL account with Verizon's outgoing server. It will automatically send via Verizon. You don't reveal your verizon.net address, you are just using their server to transmit.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Have just installed ios8 on our iPad. Can no longer send emails via Hotmail. BT email says that if can't work on this device. When will these faults be fixed?

Have just installed ios8 on our iPad. Can no longer send emails via Hotmail. BT email says that if can't work on this device.
When will these faults be fixed?

does it error out or does it just not go through?
have you tried to delete and then re-add your hotmail address? Using the outlook preset

[SOLVED]How to send email to a local user?

I have installed Mutt, msmtp, procmail and I can send and receive emails to/from remote hosts and I'd like to send email locally also (to the recipients on the same machine as the sender).
When I try to send email to a local user from the root account -
echo "Test message" | mail -s "Test subject" localuser
then I get an error that connection to the port 25 is refused. Because the /etc/msmtprc file contains the 'localhost' as the default account's host, and on the local host I don't have a mail server listening on 25 port running.
When I try to send email from a non-root account which has in /$HOME/.msmtprc file a real email account on a remote server, then of course there is an error that the domain for the email address 'localuser' is not recognized.
How can sending email to local users be enabled?
Last edited by nbd (2014-09-30 22:33:37)

If I understand correctly, postfix it's a constantly running daemon. Seems to be an overhead for delivering only from time to time sent messages.
ewaller wrote:
> Out of the box, sendmail should be safe, but I think you have to enable local mail.
Currently I have msmtp-mta installed, which is described as having sendmail functionality. If I install sendmail - will it be possible to send local email without running email daemons?

How to send email notification in different languages in Workflow ?? Urgent Help Needed

Gurus,
How to send email notification in different languages in Workflow? Can anyone send me some useful guidelines or link where it is mentioned.

There is no profile option available to specify whether send or not send email notification.
But after login, in preferences youcan set the notification preference value by which you can configure whether to send or not
to send email notifications.
If you select ''Do not send me mail' or 'Disabled' it will not send.
For other values it sends the notfication in different formats like text, html, attachments etc...
Edited by: sarojak on Jun 27, 2011 7:18 AM

I can no longer receive or send email via my Yahoo account from my iphone6. I've downloaded several "help guides" from the internet and tried them, including deleting the Yahoo account and re-adding it via imap. But nothing seems to work. Any ideas?

I can no longer receive or send email via my Yahoo account from my iphone6. I've downloaded several "help guides" from the internet, deleted and re-added the account via imap settings. Nothing seems to work. Any ideas?

Use the yahoo app if available?

How to send email via PL/SQL

Similar Messages

Maybe you are looking for