How to send File with Same name to Receiver

HI Frnds,
In my peoject i have one scenario,
I have to access Orders is the name of file , available in FTP Server, i have to send same file to Receiver side with same name Orders
Is it possible with same name dynamically??
Regards,
Raj

hi,
You have to go for variable substitution option available in receiver file adapter,but for that you have to get the file name in receiver payload.
http://help.sap.com/saphelp_NW04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
these links are also helpful
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
/people/sriram.vasudevan3/blog/2005/11/21/effective-xsl-for-multimapping-getting-source-filenames-in-legacy-legacy-scenarios
regards,
ujjwal kumar

Similar Messages

How to send file with original name through Mail adapter

I have to send file with original name as attachment through Mail Adapter. I am picking the file from FTP server through File Adapter. I am not using message mapping because files do not have any standard format.

Hi,
Have you solve your problem ?...
I have exactly the same scenario : pik up a file (file adapter) and send it in attachment by mail adapter without mapping (no IR)...
I activated Adapter specific paramters properties in the File adapter sender and i can see the FileName tag in DynamicConfiguration section of SoapHeader in SXMB_MONI...
I want to use MessageTransformationBean... BUT, how can i 'access' to FileName tag ???...
Thanks...
I setup modules like this :
AF_Modules/DynamicConfigurationBean 1
AF_Modules/MessageTransformBean rename
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
1 key.0 write http://sap.com/xi/XI/System/File FileName
1 value.0 message.FileName
rename Transform.ContentDisposition attachment;filename=message.FileName
rename Transform.ContentDescription message.FileName
rename Transform.ContentType application/csv-tab-delimited-table;name=message.FileName
But my file name attachment is message.FileName....
Edited by: Emmanuel JORAND on Sep 29, 2008 9:23 PM
Edited by: Emmanuel JORAND on Sep 29, 2008 10:25 PM

How to delete one existing file before uploading a file with same name?

Hello everybody.
I am uploading a file to Tomcat server. But, the problem is:
i want to delete an existing file in the server, if i upload a fresh file with same name. In other words, "First check for the file with the same name in the server. If it exists, then delete existing file in the server and upload fresh one". If such file doesnot exist, then upload the file to server.
I have given deleteonExit()
but, for the first time when user is uploading, i want to check for the file with same name in the server.
i am pasting the code here. please help:

<%
String contentType = request.getContentType();
if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0))
DataInputStream in = new DataInputStream(request.getInputStream());
int formDataLength = request.getContentLength();
byte dataBytes[] = new byte[formDataLength];
int byteRead = 0;
int totalBytesRead = 0;
while (totalBytesRead < formDataLength)
byteRead = in.read(dataBytes, totalBytesRead, formDataLength);
totalBytesRead += byteRead;
String contextRootPath = this.getServletContext().getRealPath("/");
contextRootPath=contextRootPath.concat("uploaded");
String file = new String(dataBytes);
String saveFile = file.substring(file.indexOf("filename=\"") + 10);
saveFile = saveFile.substring(0, saveFile.indexOf("\n"));
saveFile = saveFile.substring(saveFile.lastIndexOf("\\") + 1,saveFile.indexOf("\""));
// Create a directory; all ancestor directories must exist
File outputFile = new File(contextRootPath, saveFile);
var=outputFile.getPath();
outputFile.createNewFile();
int lastIndex = contentType.lastIndexOf("=");
String boundary = contentType.substring(lastIndex + 1,contentType.length());
int pos;
pos = file.indexOf("filename=\"");
pos = file.indexOf("\n", pos) + 1;
pos = file.indexOf("\n", pos) + 1;
pos = file.indexOf("\n", pos) + 1;
int boundaryLocation = file.indexOf(boundary, pos) - 4;
int startPos = ((file.substring(0, pos)).getBytes()).length;
int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length;
FileOutputStream fileOut = new FileOutputStream(outputFile);
fileOut.write(dataBytes, startPos, (endPos - startPos));
fileOut.flush();
fileOut.close();
outputFile.deleteOnExit();
%>Please help. Thanks for taking time.
Regards,
Ashvini

Thank you MartinHilpert,
I have one more doubt,
I am uploading the file to one folder called "uploaded". Before uploading a fresh file, i want to delete all existing files in that folder. IS that possible ?? If yes, can you please tell me how to do that ??
Regards, Thanks for your time.
Ashlvini

While saving multiple attachments from mail, files with same name are added and not replaced

While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.

Bjørn Larsen a écrit:
Hi all
Hope to get some help with Elements Organizer.
I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference.

Script to find files with same names with in a folder and it sub folders.

Looking for script to find files with same names with in a folder and it sub folders.

Are you just looking to find if any two files underneath a folder have the same name?
If you just want to know that a file named "whatever" exists in two folders, that's not too difficult, but you probably want to know the full path names.
Here's one attempt:
$ perl -MFile::Find -le 'find(\&w, "."); while (($n,$p)=each %file) {if(@{$p}>1){print join(" ",@{$p})}} sub w{push @{$file{$_}},$File::Find::name;}'That will print the pathnames on the same line of any files with the same name that appear anywhere underneath your current directory.
It's a bit long for a "one-liner", but functional.
Darren

Merging Log Files with same name

Hello,
I have log files with same name 00000000.jdb (because created at different machines). I would like to merge data stored in these two files.
I tried below approaches which do not work:
1. rename one of the files -> doesn't work as file header has file name info which doesn't match with renamed value
2. db dump/load -> dump and load works without error. (i have to dump Entity related Database and Format related Database -- from -l option) However when i try to read the file, it gives error.
Exception in thread "main" com.sleepycat.je.EnvironmentFailureException: (JE 5.0.103) Catalog could not be refreshed, may indicate corruption, errorFormatId=52 nFormats=51, . UNEXPECTED_EXCEPTION: Unexpected internal Exception, may have side effects.
I am using EntityStore and thus Annotated Entities.
Does any one has any insights?
Thanks.

Yuvaraj,
As you discovered, it is not possible to use .jdb files from one environment in a different environment. The .jdb files use an internal format with relationships between files that form the Btree.
I'm glad to hear you were able to use DbDump and DbLoad successfully.
--mark

Help - loading updated files with same name

CS4
When updating files with same name my CS4 automatically puts an extension _000
I think it should ask me if I want to replace the existing file. Is there a switch or setting that I need to change?
Thanks.
Alan

Please find the solution in thread, http://forums.adobe.com/thread/707897?tstart=0.
Hope this helps you.

Static Files with same name. How does apex determine which files to serve?

Hello, I'm using apex 4.2.1.00.08 and I cannot figure out how apex manages the static files and cannot find any help in the docs (other that some high level UI description).
The application is serving some file and I cannot find which one it is in any easy way.
I have a workspace where there are several files that have the same name, and I cannot understand how apex figures out which one to serve, and also don't understand what is value of associating a file with an application.
There are files associated with application 0, which don't appear to show up in the "shared components", but can be seen as
SELECT *
FROM wwv_flow_files
WHERE flow_id = 0;
and can apparently only be deleted using "SQL Commands" inside apex.
the URL called is something like
wwv_flow_file_mgr.get_file?p_security_group_id=13498126233076320&p_fname=myfile.css
so apparently the only parameters that matter are the workspace and the file name. The associated application is irrelevant.
apparently files linked to flow_id 0 have precedence over all the other files ...
Thanks for clearing up a bit of "fog" on this issue.

VC wrote:
Go to that application > shared components > Static files you should see the file.the problem is that there are multiple files with that name, and that sometimes the file being served is linked to application "0" and it doesn't show in the "shared components" interface ...
I have a workspace where there are several files that have the same name, and I cannot understand how apex figures out which one to serve, and also don't understand what is value of associating a file with an application.Static files can be uploaded to apex with optionally associating with an application within that workspace.
Files associated with an application are referenced using *#APP_IMAGES#*
Files not associated with an application are referenced using *#WORKSPACE_IMAGES#*I referenced with #WORKSPACE_IMAGES#, but now I see that if I use #APP_IMAGES# the URL generated will also contain the application ID. This would help to discriminate between different files with the same name but linked to different applications ...
There are files associated with application 0, which don't appear to show up in the "shared components", but can be seen asWhy are you particularly interested in application 0?Because somehow APEX puts the files that I uploaded there ... they can be seen selecting from wwv_flow_files. Do they take precedence over all other files with the same name?
Filename is unique for the given workspace[and application]I disagree. I have multiple files with the same name ... the root of this problem ...
so apparently the only parameters that matter are the workspace and the file name. The associated application is irrelevant.How is your static file referenced??
But not always, try associating an static file with and application and reference it using #APP_IMAGES# instead of #WORKSPACE_IMAGES#
See
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/concept_sub.htm#BEIDCGAJ
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/ui_file_manage.htm#HTMDB06011
Thanks, but the documentation doesn't give much details ... apparently files referenced with #WORKSPACE_IMAGES# can still resolve to files linked to specific applications ... I would like to understand the actual workflow for the various cases (file references with APP_IMAGES, referenced with WORKSPACE_IMAGES, file associated with the application, with another application, with no application, with application "0" ...).
Also, I find it somewhat misleading that you can have files associate with applications that don't exist anymore (e.g. have been deleted).
Edited by: GChierico on Apr 11, 2013 2:16 PM

Topic: How to refer columns with same name in jdbc

I have a join statement :
Select a.col1, a.col2, b.col3, b.col2 from TABLE1 a, TABLE2 b where a.col1 = b.col1
how do I refer with same column name suppose I want to get b.col2
I get error when I try rs.getString("b.col2") or
rs.getString("TABLE2.COL2")..
note I donot want positional retrieval i.e rs.getString(x) , where x is column number.
can you suggest how to refer the b.col2 uniquely.

Select a.col1, a.col2, b.col3, b.col2 from TABLE1 a,
TABLE2 b where a.col1 = b.col1You can use a column alias, like below. They "as" keyword isn't always necessary, depends on your database.
Select
    a.col1 as a_col1,
    a.col2 as a_col2,
    b.col3 as b_col3,
    b.col2 as b_col2
from
    TABLE1 a,
    TABLE2 b
where
    a.col1 = b.col1

Files with same name

Hello,
Is it possible to have several files with different assetId, but with the same assetUri, and in the same folder?
Initially, I though yes, because the assetId is a unic id that could differentiate two asset with the same assetUri (that is the visible name in the user interface). But after trying, I noticed that, in this situation, sometime only one asset is shown in the UI (bridge for example), and sometime all the assets are shown, but they are inaccessible (no preview, no possible to open them, no information, just the two assets with the same name represented in Bridge).
Is there then a way to show, in the user interface, two assets (with different assetId) with a same name?
Thank you
ps: by the way, to have two files with same assetUri, different assetId and in the same directory, it makes Bridge struggling (using 100% processor)

You can use the same class name in different packages.
The Java API does that (java.awt.List, java.util.List).
This is odd. What version of javadoc are you using,
and what command are you passing in, with what classpath setting?
-Doug Kramer
javadoc team

Multiple files with same name--- automatic renaming option??

I am trying to sort my files by adding multiple files to a single folder. However, many have the same filename, and I get the error " there already exists a file with the name "x", please choose another name" etc. I am dealing with thousands of files here that are very tedious to rename individually. Is there an option or program that either disables this block on multiple files with the same name in a common folder, or automatically renames the files as they are placed in the folder?

i would like all the files to have different names, but not have to do it myself. they are generated my my audio recorder, which automatically names files take1, take2, take3 etc. multiple sessions entail multiple folders, i am trying to consolidate.

How to create directories with same name in different schemas

I have two schemas on the same database.
I am trying to create directories with same name, but different paths in both the schemas.
When i created the directories in second schema, the directory paths of the first schema are automatically changed to the second path.
Is there any solution to create directories with same name, but different path in two different schemas on the same database.
Thanks,
Sridhar.

Hi,
>>When i created the directories in second schema, the directory paths of the first schema are automatically changed to the second path.
If you have removed the REPLACE clause of your create statement, then you would see that is not possible.
SYSTEM> connect scott/tiger
Connected.
SCOTT> create directory mydir as '/tmp';
Directory created.
SCOTT> connect legatti/pwd
Connected.
LEGATTI> create directory mydir as '/tmp';
create directory mydir as '/tmp'
ERROR at line 1:
ORA-00955: name is already used by an existing object
LEGATTI> select owner,object_name,object_type,created
2 from dba_objects where object_name='MYDIR';
OWNER OBJECT_NAME OBJECT_TYPE CREATED
SYS MYDIR DIRECTORY 19/12/2007Cheers
Legatti

How to check-in multiple files with same name having different revision num

Hi
Can anyone please tell me, how to check-in multiple files with the same name with different revision number using RIDC API.
For eg:
First I will check-in a file(TestFile.txt) into a content server with revision number 1 using RIDC API in ADF application. Then after some time, will modify the same file(TestFile.txt) and check-in again. I tried to check-in same file multiple times, however first time its checking-in correctly into server showing revision as 1, while checking-in same file again, its not giving any errror message, and also its not reflecting in server. Only one file(TestFile.txt) is reflecting in server.
How to implement this functinality using RIDC API? Any suggestions would be helpful.
Regards
Raj
Edited by: 887680 on Mar 6, 2013 10:48 AM

Hi Srinath
Thanks for your response. Its not cloning, its like check-in file first, then check-out the file and do some editing and then again upload the same file with different revision number using RIDC. I got the solution now.
Regards
Raj

How do I add files with same name to a folder

I have photos with the same name and want to add all to the same folder. I dont want to have to manually change the nams is there an easy way to do this. In windows I would have the option to keep both and it would change the extn of one of the files. Gary

You have to do that manually, but why not set your camera to number photos sequentially?
However, there is an App called A Better Finder Rename available from the App Store that can rename files.
Or from here:
http://www.publicspace.net/ABetterFinderRename/

File-File with same name

I had a requriment where I need to move files from one directory to another.There is no tranformation in data.So I haven't created any IR objects.But I want the target file with the same name as source file.I can't use any udf as I haven't implemented any mapping.Plz suggest how can I acheive this.

Hi,
This blog is just for you.
[How to send any data (even binary) through XI, without using the Integration Repository|How to send any data (even binary) through XI, without using the Integration Repository]
Just make sure that you specify File Construction mode as Create.
What ever you specify in File name in Receiver adapter won't matter, your directory should be different than sender.
Regards,
Anirudh.

How to send File with Same name to Receiver

Similar Messages

Maybe you are looking for