How to send mail in APEX 4.1 using PLSQL
Hi All,
How to send mail in APEX 4.1 using PLSQL?
Thanks In advance.
Regards
Shail
http://lmgtfy.com/?q=oracle+apex+4.1+send+mail
Similar Messages
-
How to send mails to "CC" and "BCC" using receiver mail adapter dynamically
Hi,
Due to business requirement PI need to send mails dynamically to u201CCCu201D and u201CBCCu201D using receiver mail adapter.
We have an option to send mails to u201CTou201D dynamically, but are there any option to send mails u201CCCu201D and u201CBCCu201D dynamically.
Please some help to resolve the issue. Thanks
Regards,
Sreeramulu Konjeti.Hi Sreeramulu,
As mentioned by Lucas, you can use the UDF. Inn addition to that, you need to define the Variable Headers under Variable transport binding after enabling the Adapter Specific Message Attributes.
For the Enabling ASMA, follow the below steps and check for the variable attributes.
Select the Advanced tab page.
To save adapter-specific attributes in the message header of the XI message, select Use Adapter-Specific Message Attributes and Variable Transport Binding.
The following attributes in the message header are then available for processing:
○ User: (technical name: TServerLocation)
○ Authentication key: (technical name: TAuthKey)
The following mail header fields are available for processing:
○ From: (technical name: THeaderFROM)
○ To: (technical name: THeaderTO)
○ Cc: (technical name: THeaderCC)
○ Bcc: (technical name: THeaderBCC)
○ Subject: (technical name: THeaderSUBJECT)
○ Reference to the mail that is to be replied to: (technical name: THeaderIN-REPLY-TO)
○ Reply to: (technical name: THeaderREPLY-TO)
○ Mail client program: (technical name: THeaderX-MAILER)
○ Send confirmation of receipt: (technical name: THeaderDISPOSITION-NOTIFICATION-TO)
○ Priority: (technical name: THeaderPRIORITY)
○ Importance of message: (technical name: THeaderIMPORTANCE)
To transfer further header fields, set the relevant indicator for Variable Header. The technical names for the fields are XHeaderName1, XHeaderName2, and XHeaderName3.
The parameters are included in the mail header under the names specified here.
The attribute namespace for the adapter is http://sap.com/xi/XI/System/Mail.
Thanks, -
How to send Mail from APEX 4.1?
Dear all,
In APEX 4.1,
I have a form based on the Leave_table,
it has 5 fields,
If the user filled all the fields and if the user clicks the APPLY/SUBMIT button the Data will be stored into the LEAVE_table ,
Is this Possible to send the mail with the data entered as a report to a particular (manager)mail_id?
and also the mail to contain two link/button to REJECT or APPROVE the leave applied ?
Can anyone give me the solution?
Thank you.
Regards,
Gurujothi.[APEX_MAIL|http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_mail.htm]
-
Sending mail from apex appliocation
Dear friends
Can anyone please tell me how to send mail from apex application to outside mail like gmail or yahoo
i have one report created which i want to send it to my mail from apex
Please hepl me....If it is an interactive report that you are try it on, you could probably use subscriptions to get the report to your email.
Thanks -
Can anyone help me how to send mails from apex to multiple users..
Thanks,
SriniHi Srini,
Have a look here: http://download.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28550/api.htm#CHDDHBGI
You can use a comma between the mail addresses in the to and that should send the mails to multiple people.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://www.apex-evangelists.com/
-- http://www.apexblogs.info/ -
How to send mail to distribution list ?
Hi Everybody,
Pls let me know how to send mail to distributed list???
Thanks & Regards,
raju<b></b>Hi ,
Use Function Module 'SO_NEW_DOCUMENT_SEND_API1'.
U need to pass Distribution list to Receiver and 'C' to receiver type refer the below code for clarification.
Determine the Distribution List.
gv_rec_list-receiver = gv_distribution.
gv_rec_list-rec_type = 'C'.
APPEND gv_rec_list.
Check if Distribution List is deleted.
SELECT SINGLE objnam
FROM soid
INTO lc_objnam
WHERE objnam = gv_rec_list AND
dlitp = lc_dli.
IF sy-subrc = 0.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
document_data = gv_doc_data
document_type = 'RAW'
put_in_outbox = 'X'
TABLES
object_content = gv_obj_cont
receivers = gv_rec_list
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4.
CASE sy-subrc.
WHEN '1'.
message i001(as) with 'TOO MANY RECEIVERS'.
EXIT.
WHEN '2'.
message i001(as) with 'DOCUMENT NOT SENT'.
EXIT.
WHEN '3'.
message i001(as) with 'DOCUMENT TYPE DOES NOT EXIST'.
EXIT.
WHEN '4'.
message i001(as) with 'OPERATION NO AUTHORIZATION'.
EXIT.
ENDCASE.
Hope this might have helped you.
Thanks,
Prashanth -
How can send mails using hotmail/rediffmail domain name?
I have used the below code to send a mail using javamail API?Even when I am sending my application does not have notified any of error/exceptions,But the message is not reached to I have given receipient's address in the to field.
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class Sendmail1 extends HttpServlet {
private String smtpHost;
// Initialize the servlet with the hostname of the SMTP server
// we'll be using the send the messages
public void init(ServletConfig config)
throws ServletException {
super.init(config);
smtpHost = config.getInitParameter("smtpHost");
//smtpHost = "sbm5501";
smtpHost = "www.rediffmail.com";
public void doGet(HttpServletRequest request,HttpServletResponse response)
throws ServletException, java.io.IOException {
String from = request.getParameter("from");
String to "[email protected]";
String cc = "[email protected]";
String bcc ="[email protected]";
String smtp ="www.rediffmail.com";
String subject = "hai";
String text = "Hai how r u";
PrintWriter writer = response.getWriter();
if (subject == null)
subject = "Null";
if (text == null)
text = "No message";
String status;
try {
// Create the JavaMail session
java.util.Properties properties = System.getProperties();
if (smtp == null)
smtp = "www.rediffmail.com";
properties.put("mail.smtp.host", smtp);
Session session = Session.getInstance(properties, null);
//to connect
//Transport transport =session.getTransport("smtp");
//transport.connect(smtpHost,user,password);
// Construct the message
MimeMessage message = new MimeMessage(session);
// Set the from address
Address fromAddress = new InternetAddress(from);
message.setFrom(fromAddress);
// Parse and set the recipient addresses
Address[] toAddresses = InternetAddress.parse(to);
message.setRecipients(Message.RecipientType.TO,toAddresses);
Address[] ccAddresses = InternetAddress.parse(cc);
message.setRecipients(Message.RecipientType.CC,ccAddresses);
Address[] bccAddresses = InternetAddress.parse(to);
message.setRecipients(Message.RecipientType.BCC,bccAddresses);
// Set the subject and text
message.setSubject(subject);
message.setText(text);
Transport.send(message);
//status = "<h1>Congratulations,</h1><h2>Your message was sent.</h2>";
} catch (AddressException e)
status = "There was an error parsing the addresses. " + e;
} catch (SendFailedException e)
status = "<h1>Sorry,</h1><h2>There was an error sending the message.</h2>" + e;
} catch (MessagingException e)
status = "There was an unexpected error. " + e;
// Output a status message
response.setContentType("text/html");
writer.println("<title>sendForm</title><body bgcolor= ><b><h3><font color=green><CENTER>CALIBERINFO.COM</CENTER></h3>Your message was sent to recepient(s).<br><font color=red>"+"\n"+to);
writer.println("<br><br><a href=e:/mail/javamail/mail.html>back to compose</a>");
writer.close();
Please any one help me out from this probs.
Awaiting for yours reply,
or give me a reply to: [email protected]
Regards,
@maheshkumar.kHi,
how can send mails using hotmail/rediffmail domain name?In your java application,you specified www.rediffmail.com as your
smtp server.But that is the address of that website.Try will a smtp
server instead.For a list of free smtp servers,please visit http://www.thebestfree.net/free/freesmtp.htm
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support/ -
How to send mail in html format in jsp???
Hello everybody,
I have two jsp pages.In one page I have the heading like Date,Transaction.I am retriving data from my second jsp page.And I hae included the second jsp page to my first jsp page.How to send mail this content in html format.
Thanks
SrikantMimeMessage m = new MimeMessage(session);
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setContent(content, "text/html");this if u need to send a mail content as html -
How to send mail with attachment
Hi,
How to send mail with word document as attachment in oracle pl/sql.
kindly help me .
thank you
regards
P Prakashcreate or replace procedure pdf_mail(
p_sender varchar2, -- sender, example: 'Me <[email protected]>'
p_recipients varchar2, -- recipients, example: 'Someone <[email protected]>'
p_subject varchar2, -- subject
p_text varchar2, -- text
p_filename varchar2, -- name of pdf file
p_blob blob -- pdf file
) is
conn utl_smtp.connection;
i number;
len number;
BEGIN
conn := demo_mail.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => demo_mail.MULTIPART_MIME_TYPE);
demo_mail.begin_attachment(
conn => conn,
mime_type => 'application/pdf',
inline => TRUE,
filename => p_filename,
transfer_enc => 'base64');
-- split the Base64 encoded attachment into multiple lines
i := 1;
len := DBMS_LOB.getLength(p_blob);
WHILE (i < len) LOOP
IF(i + demo_mail.MAX_BASE64_LINE_WIDTH < len)THEN
UTL_SMTP.Write_Raw_Data (conn
, UTL_ENCODE.Base64_Encode(
DBMS_LOB.Substr(p_blob, demo_mail.MAX_BASE64_LINE_WIDTH, i)));
ELSE
UTL_SMTP.Write_Raw_Data (conn
, UTL_ENCODE.Base64_Encode(
DBMS_LOB.Substr(p_blob, (len - i)+1, i)));
END IF;
UTL_SMTP.Write_Data(conn, UTL_TCP.CRLF);
i := i + demo_mail.MAX_BASE64_LINE_WIDTH;
END LOOP;
demo_mail.end_attachment(conn => conn);
demo_mail.attach_text(
conn => conn,
data => p_text,
mime_type => 'text/html');
demo_mail.end_mail( conn => conn );
END;
ref:
http://www.plpdf.com/23-1725.html
Edited by: Mahanam on Jan 9, 2011 10:32 PM -
How to Send mail in oracle 10g
I am new in oracle developer.....we are using oracle 10g developer...how to send mail through oracle 10g on a button click.pease help me.
Thanks in advanceThis question have been asked many times on this forum, see if you get help from following:
https://forums.oracle.com/message/5395438#5395438
Search results: https://forums.oracle.com/thread/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=form+email
Check this out as well:
http://nzchaudhry.wordpress.com/2013/05/31/send-report-via-email-attachment-in-oracle-forms-10g/
You can find init.ora or initSID.ora file under $ORACLE_HOME/dbs on linux and on Windows under $ORACLE_HOME/database. Otherwise you can create it using "create pfile from spfile" command
Aneel -
How to Send Internal table to SAP Spool using Function Modules or Methods?
Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
KiranThis is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
MY_MONTH type T549Q-PABRP,
STR_MY_MONTH(2) type C,
MY_YEAR type T549Q-PABRJ,
STR_MY_YEAR(4) type C,
CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
CMD like PC408-LTYPE value '/:', "command
TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
DOCDATA like SODOCCHGI1,
OBJTXT like SOLISTI1 occurs 10 with header line,
OBJPACK like SOPCKLSTI1 occurs 1 with header line,
RECLIST like SOMLRECI1 occurs 1 with header line,
OBJHEAD like SOLISTI1 occurs 1 with header line,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_buffer type string,
l_no_of_bytes TYPE i,
l_pdf_spoolid LIKE tsp01-rqident,
l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
spool_id type rspoid,
line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
ITAB-PERNR = P0001-PERNR.
ITAB-ABKRS = P0001-ABKRS.
ITAB-ENAME = P0001-ENAME.
ITAB-USRID_LONG = P0105-USRID_LONG.
append itab.
clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
and FPBEG ge W_BEGDA
and FPEND le W_ENDDA
and SRTZA eq 'A'.
* Produce payslip for those payroll results
if SY-SUBRC = 0.
call function 'GET_PAYSLIP'
EXPORTING
EMPLOYEE_NUMBER = ITAB-PERNR
SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
PAYSLIP_VARIANT = PAY_VAR
IMPORTING
RETURN = RETURN
P_INFO = P_INFO
TABLES
P_FORM = P_FORM.
check RETURN is initial.
* remove linetype from generated payslip
loop at p_form.
objbin = p_form-linda.
append objbin.
line_cnt = line_cnt + 1.
endloop.
file_length = line_cnt * 1022.
* create spool file of paylsip
CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
EXPORTING
i_file_length = file_length
IMPORTING
e_spoolid = spool_id
TABLES
it_textdata = objbin.
IF sy-subrc EQ 0.
WRITE spool_id.
ENDIF.
DESCRIBE table objbin.
DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_id
NO_DIALOG = ' '
DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
TABLES
PDF = pdf
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\itab_to_pdf.pdf'
filetype = 'BIN'
TABLES
data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
OBJHEAD = 'Objhead'.
append OBJHEAD.
* preparing email subject
concatenate W_ENDDA(6)
' Payslip-'
ITAB-ENAME+0(28)
ITAB-PERNR+4(4) ')'
into DOCDATA-OBJ_DESCR.
DOCDATA-OBJ_NAME = 'Pay Slip'.
DOCDATA-OBJ_LANGU = SY-LANGU.
OBJTXT = 'Pay Slip.'.
append OBJTXT.
*prepare email lines
OBJTXT = DOCDATA-OBJ_DESCR.
append OBJTXT.
OBJTXT = 'Please find enclosed your current payslip.'.
append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
clear OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = 3.
OBJPACK-DOC_TYPE = 'RAW'.
append OBJPACK.
* Create Message Attachment
ATT_TYPE = 'PDF'.
describe table OBJBIN lines TAB_LINES.
read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = ATT_TYPE.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Payslip'.
append OBJPACK.
* Create receiver list refresh RECLIST.
clear RECLIST.
RECLIST-RECEIVER = itab-USRID_long.
translate RECLIST-RECEIVER to lower case.
RECLIST-REC_TYPE = 'U'.
append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
call function 'SO_DOCUMENT_SEND_API1'
exporting
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
tables
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = pdf
CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = RECLIST
exceptions
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
others = 8.
if SY-SUBRC NE 0.
ITAB-MTEXT = 'Message Not Sent to : '.
else.
ITAB-MTEXT = 'Message Sent to : '.
endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
else.
"SY-SUBRC Not = 0
ITAB-MTEXT = 'Payroll data not found : '.
endif.
"end of SY-SUBRC = 0.
modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
at new MTEXT.
uline.
write : / ITAB-MTEXT color 4 intensified on.
write : / 'Emp. Code' color 2 intensified on,
12 'Emp. Name' color 2 intensified on,
54 'Email ID' color 2 intensified on.
endat.
write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop. -
How to send multiple customer statements by email using RFKORD11 program.
Hi All,
How to send multiple customer statements by email using RFKORD11 program. Is it possible?
As of now we copied the stanadard program and sending the customer statements by email, one by one.
if i execute the z program it will show the customer statement and send mail option.
if i click send mail it will send that customer statement to the corresponding customer.
then again i need to click back, it will show next customer statement and click on send mail.
Pl guide me, if any one worked on this program.
thanks in advance.
Regards,
MaheshTry execute the program in the background to see if that helps.
-
How to send multiple customer statements by email using RFKORD11
Hi All,
How to send multiple customer statements by email using RFKORD11 program.
As of now we copied the stanadard program and sending the customer statements by email, one by one.
if i execute the z program it will show the customer statement and send mail option.
if i click send mail it will send that customer statement to the corresponding customer.
then again i need to click back, it will show next customer statement and click on send mail.
Pl guide me, if any one worked on this program.
Regards,
MaheshHi .
You first need to copy that program to Z and make the changes in it. Can you convert sapscript to smartform?
then you can write a logic to send mail in the loop.
to send the pdf file
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/mailsendthroughoutputcontrols
Regards,
Madhuri
Edited by: madhuri sonawane on Jun 10, 2009 4:20 PM -
Send mail with attached file without using Repository
Hello,
I want to know if have a way to Send mail with attached file without using Repository.
Regards
EladElad,
Check this article where a image has been picked by the file adapter and sent as an attachment to the mail adapter.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816">Sending an Image File Through XI in a File-to-Mail Scenario</a>
For how to proceed without integration repository content look into this blog,
<a href="/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository">How to send any data (even binary) through XI, without using the Integration Repository</a>
Combining these 2 you have the solution.
Regards
Bhavesh -
How to send a file as an attachment using mailx
Hi
Can any one tel me how to send a file as an attachment using mailx command in shell script.
Thanks,
Suman.Wrong forum where to ask such questions.
Check this one link:
http://www.unix.com/shell-programming-scripting/18370-sending-email-text-attachment-using-mailx.html?t=18370#post70254
Maybe you are looking for
-
Embedded font not appearing...
If you run the following code provided you have a MC on stage with "ball" as instance name, the text appears as intended. However if you uncomment the line that embeds the font, it does not display at all. I have a Font symbol in my library with the
-
Safari 6.0.5 extention preferences says 'LOCALIZED STRING NOT FOUND'
I am running Safari 6.0.5 and recently my extentions stopped working. When I went to the preferences to see what was wrong all that comes up is this. I have tried web searching it and not a lot has come up. Most tell me to reinstall safari but I don'
-
Integrate Crystal Reports XI Release 2 and VS2005 IDE
<p>Hi,</p><p>How can i integrate Crystal Reports XI R2 is directly into the Visual Studio 2005 development environments. So i can host my report in either a Web or Windows application with one of the Crystal Reports viewer controls, or use the extens
-
Trouble using find (ctrl+f) command
I am using the adobe digital editions book, The Remains of the Day by Kazuo Ishiguro on my computer. When I try to use the find command, which I have used in adobe pdf books before successfully, the search always comes up as "No Match Found" even whe
-
Will a Palm Centro or Blackberry sync with iCal?
Will a Palm Centro or Blackberry sync with iCal?