How to send workflow variable to another List
Hi,
I have created Workflow Variable, from that variable I need to get the information from another list. Could you pls share u r Knowledge.
Regards
Tharak
If you want to set a field in another list item, you would run the update item command, select the field you want to change and then select your workflow variable.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]
Similar Messages
-
HOW to send a value to another jsp page
HOW to send a value to another jsp page, like user name in one jsp page to another jsp page
In the most simplest form...
// pageA.jsp
<html>
<body>
<form action="pageB.jsp" method="post">
<b>First Name:</b> <input type="text" name="FNAME" value="Joe">
<input type="submit" value="Submit">
</form>
</body>
</html>
// pageB.jsp
<html>
<body>
<b>Name:<b> <%=request.getParameter("FNAME")%>
</body>
</html> -
How to send 5th variable to maessage dynamically
how to send 5th variable to maessage dynamically..
we have only 4 like msgv1,msgv2,msgv3,msgv4.......
how to send 5th variable
thanks in advsssssshi,
as per my knowledge it is not possible because Message texts in table T100 can contain up to four ampersand characters (&) as placeholders. You can replace these at runtime using the WITH addition in the MESSAGE statement:
MESSAGE ... WITH f1 ... f4.
The contents of fields f1 ... f4 are then inserted sequentially into the message text in place of the placeholders.
for more information on messages follow this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbaaaf35c111d1829f0000e829fbfe/content.htm
regards,
Ashok reddy -
I have a Iphone 3gs with the reading list and I was upgrading my phone however Im changing to a samsung galaxy s3, I wanted to know how to send or sync my reading list on my phone to maybe an email or something so that I could copy it to my galaxy??
Go to supportprofile.apple.com and remove your device. Alternatively you can call in to apple and have Apple look up your phone number. They may be able to remove it from their end.
If it does not show up in either of these places, have the people whe own the other iPhone send you a message> this message will be blue for an iMessage> have them push an hold on that message and select the option "send as text"> this should send the message as green> do this two - four time till it starts sending as green on its own.> this should fix it. -
Using SKPTSMTPMessage how to send a variable String?
I am using SKPTSMTPMessage to send an email in the background but I need to send a variable string. I have tried putting a %@ in the text but it just sends the %@ and not a variable. Please Help?
Hopefully, iCrazy23Did you ever figure out how to do this? Because actually I'm trying to do pretty much exactly the same thing. I'm actually having trouble even outputting the digital signal at all with my USB-6501. I was initially trying to use DAQ Assistant, but then found out I probably shouldn't be using this and instead should be using the DAQmx individual functions. I was directed by NI Support to look at the example "Gen Dig Pulse Train-Continuous.vi," but I haven't been able to figure out how to use this for my application. For my project I want to send a TTL signal to vavles that release fluids as well. I have 3 2-way liquid releasing valves that I want to be synced so that only one is open at a time (for a user specified amount of time), and they open in a regular repeating sequence. I also have another 3-way valve controlling a vacuum that I would like to be continuously pulsing, but for specified amounts of time (e.g., 3 seconds open, 3 seconds closed, and so on).
I believe I can figure out the logic and the programming involved with figuring out the exact sequencing and timing manipulation, however, I'm having trouble just being able to output any digital signal with a varying time. If you could offer any help on this, it would be greatly appreciated. Thanks! -
How to access workflow variables from business classes?
In WLI2.1 the com.bea.wlpi.server.admin.Admin bean was useful to retrieve workflow
variables for a particular instance id.
Is there anything similar in 8.1?
We have to do the following:
In the workflow, when a particular task gets created, a user (claimant of the
task) should be able to pull the workflow xml data in a JSP. The user may update
the data from the JSP and then the updated xml needs to be saved in the workflow.
Then, onTaskCompleted, the updated xml will follow the rest of the workflow.
How to do this is 8.1?
Thanks in advance.Hi,
Pls check for setRequest/setResponse in task control and setTasksRequest/setTasksResponse
i task worker control. Hope this will resolve your issues as they have XmlObject
as parameter.
Regards
Sai
"Aparna" <[email protected]> wrote:
>
In WLI2.1 the com.bea.wlpi.server.admin.Admin bean was useful to retrieve
workflow
variables for a particular instance id.
Is there anything similar in 8.1?
We have to do the following:
In the workflow, when a particular task gets created, a user (claimant
of the
task) should be able to pull the workflow xml data in a JSP. The user
may update
the data from the JSP and then the updated xml needs to be saved in the
workflow.
Then, onTaskCompleted, the updated xml will follow the rest of the workflow.
How to do this is 8.1?
Thanks in advance. -
How to access Workflow variables in Form Designer?
Hello,
I am wanting to set certain subforms to readonly depending on which part of the workflow the form is currently on. I already have the JavaScript code working to set the subform fields to readonly, but now I cannot figure out how to trigger this and where do I keep a variable to keep track of which part of the workflow I am currently in.
I assume I will have a variable in the workflow itself and then I can use the Set Value QPAC to change the variable for each workflow step before it goes to the User QPAC, but what about within the form? I don't understand how the form javascript will know to execute, so how does my workflow "talk" to the form to set these fields to readonly?
Right now the JavaScript code is sitting in the root::initialize part of the form. I was assuming I could have something like "if my workflow variable is equal to XX then set this subform to read only". But, how do I access my workflow variable in the form designer?
Also, since I have digital signatures, I am having to pass all the form data in document variables, will this affect how I need to do this? I was also thinking of possibly accessing/setting a hidden field in the form, but thought the above way may be better.
I hope that made sense!
Thank you,
JenniferTo follow-up, I spoke with Adobe support this morning and they said that I cannot access Workflow variables within Designer (besides those Workflow variables that are already provided).
He mentioned that if I use the hidden fields, that I would need to Render the form each time before going to the User to trigger this to happen. So, I am not sure what I will do just yet. I probably not worry about making the fields readonly for the time being; it was a little extra thought I had and isn't required for our process.
Thank you,
Jennifer -
How to replace one variable with another in large number of queries
Hello guys!
I have this situation: our company needs to use one variable instead of another for certain amount of queries.
Is there some way to automatically replace one variable with another for a certain characteristic in big number of queries ( like 150 - 200 ) ? Doing this manually would take lots of time)
Apreciate your help!you could try (at your own risk) the following:
1. search the technical id (ELTUID) of your variable in table RSZELTDIR
2. see where this variable is used in table RSZELTXREF (by filling RSZELTDIR-ELTUIID in RSZELTXREF-TELTUID)
3. add similar entries for your new variable
4. delete the entries for the old variable (they're part of the key, so you can't simply "change" them) -
How to declare global variables using another global variable in ODI
I am declaring a gloabal variable using another global variable.
say for example:
I have a global variable empid.
I am decalaring another global variable empname in refreshing tab of global variables and the select statment is
select empname from emp where empno = #GLOBAL.empid -------if i write like this i am getting error as invalid character.
select empname from emp where empno = '#GLOBAL.empid'-------if i write like this i am getting error as invalid number.
I have kept the datatype as numeric and action as non persistent
Please help
Thank you in advance.Hi,
You cant test/refresh empname standalone.
You need to create a new package drag and drop both variables and make them as refresh variable and execute that package and test.
Flow,
empid----> empname
Thanks,
Guru -
How to send workflow notification from a custom form in R11i
Hi Gurus,
We have a custom module to evaluate vendors, which has 2 custom forms viz Evaluate form and Approve form, user will evaluate the vendor and submits the same for approval, and when submitted for approval(Submit button) a mail is being sent to the employees supervisor using UTL_MAIL.SEND informing him to approve.
And now client wants to send workflow notification upon submitting for approval. As Iam very much new to workflow I need your valuable guidance and suggestions.
Thanks
SandeepHi Sandeep
Take some time and check the Oracle Workflow tutorial available at Anil Passi website. The URL is as follows
http://oracle.anilpassi.com/oracle-workflows-training.html
Hope this will help.
Regards
Ali -
How to send the playhead to another scene
Hello everybody
I am designing a project which demands many scenes to be involved in. so, I am trying to send the playhead to another scene by clicking on a button existed in a movie Clip at the main root. I used gotoAndPlay demand. but, it is not working. Do you have any command can I use in this situation?
Hoping to see your comments very soon caz it is very urgent
thanks/best regards,From what I can tell of that image, it appears that it should be okay. A likely cause of additional problems is the use of scenes... I never recommend using them... they can be problematic to navigate. I can offer what someone else would probably tell you to try in this situation. In frame 1 of the aboutus scene, put a frame label "aboutus_frame1", and then change line of code to _root.gotoAndPlay("aboutus_frame1");
IF that doesn't work, then I can't offer much else except to say to not use scenes. Use movieclips and/or the one timeline with sections spread along it. -
Workflow Copy To Another List - If Statements
Hi,
I have an if statement which once satisfied, I want it to copy to another list.
If each of these columns is either "Approved" or "Not Applicable" it should move the item to a new list.
This is what I have tried:
If Current Item:Column1 equals Approved
or Current Item:Column1 equals Not Applicable
and Current Item:Column2 equals Approved
or Current Item:Column2 equals Not Applicable
and Current Item:Column3 equals Approved
or Current Item:Column3 equals Not Applicable
and Current Item:Column4 equals Approved
or Current Item:Column4 equals Not Applicable
and Current Item:Column5 equals Approved
or Current Item:Column5 equals Not Applicable
and Current Item:Column6 equals Approved
or Current Item:Column6 equals Not Applicable
then Copy item in Current Item to List2
Sometimes one or two columns won't be set to Approved/Not Applicable and it will still copy the item.
Is there another way to do this?
Thanks.Hi,
Break down you single if condition in multiple ifs (make them nested), like
If Current Item:Column1 equals Approved
or Current Item:Column1 equals Not Applicable (inside this if write) If Current Item:Column2 equals Approved
or Current Item:Column2 equals Not Applicable (Now, inside this if ) Current Item:Column3 equals Approved
or Current Item:Column3 equals Not Applicable and so on. Hope it will work. -
How to send a variable from one class to another?
hello,
i have "One.as", which is the document class for one.swf.
i also have "two.swf", with "Two.swf" entered as its document
class...
One loads two into it. two is basically a 10 frame movieClip
with a variable at the beginning called "var endFrame:Boolean =
false", then on the last frame it says endFrame = true.
my question: how in the world do I communicate this back to
One.as??? i've tried ENTER_FRAME listeners, declaring the variable
here and there... and many other embarrassingly usuccessful
strategies.
i would just like to load in "three.swf" after two.swf
finishes... but One needs to know that it has indeed finished.
your help would be greatly appreciated. thanksyarkehsiow,
> David,
> thank you for responding.
Sure thing! :)
> so does what you are saying mean that endFrame is a
property of
> two (the movieClip), or Two (the Class)?
If you've written a property named endFrame for your Two
class, then
yes, Two.endFrame is a property of that class.
Looking back at your original post, I see that you wrote
this:
> One loads two into it. two is basically a 10 frame
movieClip
> with a variable at the beginning called "var
endFrame:Boolean = false",
> then on the last frame it says endFrame = true.
So it sounds like your Two class extends MovieClip. (I'm not
sure
that's true, but that's what it sounds like.) That means your
Two class
supports all the features of the MovieClip class, including a
play() method,
a currentFrame property, and so on. In addition, you've added
new
functionality that amounts to -- by the sound of it -- a
property named
endFrame. If you made your property public (i.e., public var
endFrame),
then it should be accessible by way of an object reference to
your Two
instance.
myTwoInstance.endFrame;
> so can i invoke that method in One.as? do I call it
Two.endFrame (if
> (Two.endFrame == true) {?
Methods are things an object can *do,* such as
gotoAndPlay(). What
you're describing is a property (a characteristic ... in this
case, a
Boolean characteristic). You wouldn't use the expression
Two.endFrame
unless that property was static. Static classes are those
that cannot have
an instance made of them. Think of the Math class. It
contains numerous
static properties in the form of constants, such as Math.PI,
Math.E,
Math.SQRT2, and so on. You can't create an instance of the
Math class -- it
wouldn't make sense to -- so Math is a static class.
On the other hand, you definitely create instances of the
MovieClip
class. Every movie clip symbol is an instance of MovieClip
class, which
means that each instance carries its own unique values for
MovieClip class
members. The MovieClip class defines x and y properties, but
each movie
clip symbol (that is, each instance of the MovieClip class)
configures its
own values of those properties, depending on where each
instance is located
on the Stage.
Assuming your Two class is not static, then somewhere along
the line,
your One class will have to make an instance of it. Somethine
like ...
// inside your One class ...
var myTwo:Two = new Two();
... at which point that myTwo variable because a reference to
that
particular instance of Two. You can invoke Two methods on
that instance.
You can invoke Two properties and events on that instance.
You can invoke
whatever functionality is defined by the Two class on that
myTwo instance.
If Two extends MovieClip, that means you can also invoke any
MovieClip class
member on that myTwo instance.
At some point in your One class, you can refer to that myTwo
instance
later and check if the value of myTwo.endFrame is true or
false.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design." -
How to send mail as a distribution list
I have created a number of distribution lists under the groups tab just to the right of mailboxes in the recipients section of the exchange admin centre in microsoft exchange 2013.
i have set permission on these mailboxes for send as to be permitted but when trying to send mail from outlook 2013, outlook web app or from ios i am unable to get the distribution lists email address to appear in the from list.
could someone please explain how i can resolve this for each of these 3 platforms?Hi,
Great advice from Veerapandian.
Based on my knowledge, Distribution List is based on Outlook, Distribution Group is based on Exchange server. You can grand send as permission to DG.
Send as permission is a permission based on AD, please make sure the DG can be resolved from GAL.
Please run following command to whether set “Hide this group from address lists” attribution, if so please remove this setting.
Get-DistributionGroup | FL alias,*HiddenFromAddressListsEnabled*
More details about Configure Distribution Group Properties, please refer to:
http://technet.microsoft.com/en-us/library/bb124513(v=exchg.150).aspx
Best Regards,
Allen Wang -
How to get a variable into another block?
Hello,
(I am from Germany, so be patient due my english please)
We do a project at our University where we have to do with wordfrequencies. The app works fine, but it cannot works with the variable wich contains the information to analyse.
Look, I am more or less new in Java and I found a code and modyfied that. So I had to initalize the variable with the data from another class. I did the following thing.
Thats is the class, where the variable is come from:
class Lesen extends HTMLEditorKit.ParserCallback
String zeile;
String fileName;
Wortfrequenz aha; // name of the class where I need the variable public Lesen (String fileName)
this.fileName = fileName;
public void handleText(char[] data, int pos)
String strom = new String (data);
aha = new Wortfrequenz ();
aha.verb(strom); // "strom" is the variable here in this class which caontains the data
....and within the class "Wortfrequenz" I tryed to do the following thing:
import java.util.*;
import java.io.*;
public class Wortfrequenz
static String flus;
public void verb (String o)
flus = o;
HashMap words = new HashMap();
HashMap stopWords = new HashMap();
String delim = " \t\n.,:;?!-/()[]\"\'";
String file;
String word;
Count count;
try
FileReader kl = new FileReader("stopwords.txt");
BufferedReader mk = new BufferedReader(kl);
String einlesen;
Lesen eins = new Lesen(flus);
while ((einlesen = mk.readLine()) != null)
stopWords.put(einlesen, einlesen);
mk.close(); if I test the app and do a "System.out" direktly after
flus = o;then I can see that the information is within the variable, but when I test the variable within the next block where I need it, for example after
Count count;or anywhere in this block, then I get
null
null
null
null
null
...if anyone tell me how I can get the information of this variable into the nex block, that would be great.
Thanks a lot for helping...
StephanThis: public void verb (String o)
flus = o;
}Is the whole verb method. That's all it does is assign the flus variable. This:{
HashMap words = new HashMap();
// etcIs an initializer, which runs as soon as the object is created, ie before the verb method.
Maybe you are looking for
-
InDesign data merge isn't pulling in all fields, seems to be confusing some fields
Hi there - I'm trying to do a data merge in CS6 for about 450 address labels. The labels are 10-up so I made a .csv file with 10 equal sets of colums (named Firstname1, Firstname2, Firstname3, etc.) and merged those into my label document. I've done
-
Hi guys, I have a unsigned midlet installed in nokia 6600. This midlet opens an http connection and it asks for permission before connecting. I understand this can be solved if I sign my midlet with a trusted certificate. But phone also asks to selec
-
I am trying to use the Magic Wand to highlight a dull sky so that I can add something more interesting. When I try to isolate this area, the magic wand seems to just make a random selection throughout my photo. I have anit-alias on, and my tolerance
-
How to integrate the apache 2.2 to eclipse 3.2
Hi everyone, I am setting up the environment for my project I want to do the project in the eclipse 3.2 ide so I need to setup the apache 2.2 in the eclipse ide so i dont know how to add apache in the eclipse ide can anyone please help thanks in adva
-
My message is similar to this one: http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&message.id=4885 but show clear source of problem. So I start... I have [brand new ] T61 with XP SP2 Russian, installed from R&R disks from Lenovo