How to send XML packet from external socket server to OSB
Hi folks,
How do I use external Socket Server(tcp) to send payload to OSB ?
I have configured the socket protocol in my OSB. I am also able to send and receive responses by testing my proxy services from OSB itself.
But now, we want to use some external socket (tcp)server to be able to fire some xml file and then receive response on OSB.
Please help
salil
You need to use a socket client application to send a message to a socket where your proxy is listening. For receiving a message at a socket, configure business service at OSB.
Regards,
Anuj
Similar Messages
-
How to send delivery document from external system to ECC
i have a business requirement to send a delivery and billing documents from external system ( MS access ) to ECC
could any one light me how to do this ???
Thank you in advanceHi Ahmed,
Talk to your middleware team, They will upload the data through RFC.
Basiclly RFC(Remote function call) works like it will call the function module and then upload the data.
For more information, check the link given below.
http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5b6a85b11d6b28500508b5d5211/content.htm
Hope this helps,
Regards,
MT -
How to read xml reports from external application
Hi All,
I want to generate reports from SIEBEL Database and access those reports from external application(like BlackBerry application). I have gone through by some blogs and found that we can access the generated reports from an external application using the URL.
When I use this URL on browser it gives me the xml file of the report. But I am unable to read this file from the Blackberry application.
Thanks in advanceHi Angha,
I want to invoke other portal application from my application.
Portal URL's also get changed from one system to Other. Prototype Portal->Development Portal -> Quality Portal->Production Portal>
All the above Portal URL will be different.
I want trigger another application dynamically.
Thx & Rgds
AW -
How to send xml file from local folder to azure storage
Hi,
My plan is i have xml files which are under folders in my local.
I want to use mobile service to send xml files to azure storage,
how shall i do that, either by c# or mobile service.
If internet stop, I will use my mobile service to transfer all xml files to azure storage and run web job to do to update azure
sql by xml file.
please advice.
SupermanHi,
You could refer the following link for assistance with uploading image files to Azure Blob Storage using Mobile Services:
http://azure.microsoft.com/en-us/documentation/articles/mobile-services-windows-phone-upload-data-blob-storage/
And for image files you could refer the following link:
http://stackoverflow.com/questions/25977406/upload-a-text-file-with-azure-mobile-services
Regards,
Malar. -
How to send multiple objects from Client to Server
Hi
I have a simple Client - Server architecture. I am trying to send 5 objects from Client to the Server which the server would operate on.
In the past I've used PrintWriter to pass Strings from Client to Server but now when I am dealing with multiple Objects and PrintWriter not allowing sending of Arrays or ArrayList, how can I send these from the Client to the Server? What would be a good writer to use for this purpose?
Thanks!Thanks, I am looking into ObjectOutputStream but from the API it appears I can only send 1 object at a time. I need to send 5 objects per transaction and then send the next group of 5 objects for another transaction.
Could you clarify some more on how to put these objects together as a single Object perhaps?
Thanks -
hi
i need to create an XML with some values file from Oracle Forms 6.0 and then send this XML file To a URL to access the database,which in turn will send me XML file with new values.Can any body help me out as i don't have any ideas
Regards
SunilSunil,
and this must be using a URL and can't be handled by a database stored procedure ?
Anyway, your scenario can be achieved using teh Java Importer in Forms 6i and above. You woudl write a Java program that takes a String and loads it to an URL. It then checks the response URL for its content.
Frank -
Attach doc from external content server- using Generic Object Service (GOS)
Dear All,
i have intergrated an external content server to SAP using SAP archive link. All the scanned document are there in Content server and corresponding entries are done in SAP.I can search and view document using tcode : OAAD
Please tell me steps for "how to attach a document from external content server using Generic Object Service "
Scenario is : For example when we change any Master records or create a new PO, or do some financial transaction then i need to attach the supporting document which is there in my content server connected to SAP.how do we manual attach a Document in SAP using GOS.
Do we need to do some special configuration to use GOS .please give the steps from initial.
Thanks
sandeepHello,
Check your configuration of document type assignement to required business document - object type, Archivelink table, content repository in OAC3 transaction.
Goto respective business document > Click on GOS > Create > Store business document - Here you can see defined document type with desctiption. Double click on this the assign your document to this business document. Save it.
This will help in attaching the document to your required business document.
To verify you can check the archivelink table or by transaction OAAD.
Hope this will help you.
-Thanks,
Ajay -
Send xML packet to TCP/IP socket in SOA 11g
Send xML packet to TCP/IP socket in SOA 11g
Hi,
I have a requirement like
I need to pass xml data to TCP/IP socket in the form of packets in SOA11g.
How we can do this.Please advise me.step by step procedure helps more.Hi,
There is a JCA Adapter for Sockets available... Have a look at this doc...
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_sock.htm#BABEBEJH
Cheers,
Vlad -
How to send a file from FTP to external server
My requirement is to send a file from FTP to D3(External) server.
Now I am able to store the file in Appln server.
I want to send the file created by the program thru FTP to D3 server.
I know the username,Password,HostID,RFC destination details.
How to send the file from FTP to D3.
If u have any program,Plz send it...
I dont want the function modules name...I want the example code ....
Thanks in advance.Hi Sumi,
You could do it so that you create a .bat or .cmd script to your server which does your ftp transfer.
To do this you must use sm69 to create a external operating system command which you can call from FM SXPG_COMMAND_EXECUTE. To SXPG_COMMAND_EXECUTE you the file you need to transfer as a parameter.
What happens is that your abap program passes the file to windows batch script (.bat .cmd) which will then do the transfer for you.
Here's a sample of ftp-script for windows:
echo open IP_ADDRESS_TO_YOUR_SERVER > c:zftp_transfer.ftp
echo USERNAME>> c:zftp_transfer.ftp
echo PASSWORD>> c:zftp_transfer.ftp
echo put YOUR_FILE>> c:zftp_transfer.ftp
echo quit>> c:zftp_transfer.ftp
ftp -s:c:zftp_transfer.ftp
also take a look here for more details:
http://support.microsoft.com/?kbid=96269
Ok, this might be a bit trivial but if your server is unix/aix etc.. Instead of using batch script you must do a shell script.
Regards,
Ville -
How to create xml file from Oracle and sending the same xml file to an url
How to create xml file from Oracle and sending the same xml file to an url
SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way. -
How to send the data from mac pc to External drive
how to send the data from mac pc to External HDD
or Pen Drive but with out deleting the preview as dataYou can use "Finder", which is in your dock, to copy files from your iMac folders over to the external hard drive.
Hope this helps -
How to send an email to external user (offline form) from se38
Hi all
how to send an email to external user (offline form) from se38 and upload the same from recipent.
we have sent mail using scripts and smartforms but couldnt do here. It will be helpful if you can give us any sample code
regards
mohammedHi,
Have a look at this thread [Re: Sending PDF forms (created using SFP) as Email Attachment] i explain all the solution with a sample code .
Hope it's help you
regards -
Send xml file from sap to third party url through https
Hi,
I have a requirement to send the xml file from ecc to a 3rd party url through HTTPS. How can we achieve this using ABAP.
Client doesn't have XI enviroment. The client has provided the 3rd party url where the file needs to be uploaded.
Please help ! <removed by moderator>
Thanks in advance.
Regards,
Chitra.K
Edited by: Thomas Zloch on Sep 12, 2011 12:58 PMHi Chitra,
I had similar requirement and here is what I did: -
REPORT Z_HTTP_POST_TEST_AMEY.
DATA: L_URL TYPE STRING ,
L_PARAMS_STRING TYPE STRING ,
L_HTTP_CLIENT TYPE REF TO IF_HTTP_CLIENT ,
L_RESULT TYPE STRING ,
L_STATUS_TEXT TYPE STRING ,
L_HTTP_STATUS_CODE TYPE I ,
L_HTTP_LENGTH TYPE I ,
L_PARAMS_XSTRING TYPE XSTRING ,
L_XSTRING TYPE XSTRING ,
L_IS_XML_TABLE TYPE STANDARD TABLE OF SMUM_XMLTB ,
L_IS_RETURN TYPE STANDARD TABLE OF BAPIRET2 ,
L_OUT_TAB TYPE STANDARD TABLE OF TBL1024
MOVE 'https://<hostname>/xxx/yyy/zzz' TO L_URL.
MOVE '<XML as string>' TO L_PARAMS_STRING.
*STEP-1 : CREATE HTTP CLIENT
CALL METHOD CL_HTTP_CLIENT=>CREATE_BY_URL
EXPORTING
URL = L_URL
IMPORTING
CLIENT = L_HTTP_CLIENT
EXCEPTIONS
ARGUMENT_NOT_FOUND = 1
PLUGIN_NOT_ACTIVE = 2
INTERNAL_ERROR = 3
OTHERS = 4 .
"STEP-2 : AUTHENTICATE HTTP CLIENT
CALL METHOD L_HTTP_CLIENT->AUTHENTICATE
EXPORTING
USERNAME = 'testUser'
PASSWORD = 'testPassword'.
"STEP-3 : SET HTTP HEADERS
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
EXPORTING NAME = 'Accept'
VALUE = 'text/xml'.
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
EXPORTING NAME = '~request_method'
VALUE = 'POST' .
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_CONTENT_TYPE
EXPORTING CONTENT_TYPE = 'text/xml' .
"SETTING REQUEST DATA FOR 'POST' METHOD
IF L_PARAMS_STRING IS NOT INITIAL.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
TEXT = L_PARAMS_STRING
IMPORTING
BUFFER = L_PARAMS_XSTRING
EXCEPTIONS
FAILED = 1
OTHERS = 2.
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_DATA
EXPORTING DATA = L_PARAMS_XSTRING .
ENDIF.
"STEP-4 : SEND HTTP REQUEST
CALL METHOD L_HTTP_CLIENT->SEND
EXCEPTIONS
HTTP_COMMUNICATION_FAILURE = 1
HTTP_INVALID_STATE = 2.
"STEP-5 : GET HTTP RESPONSE
CALL METHOD L_HTTP_CLIENT->RECEIVE
EXCEPTIONS
HTTP_COMMUNICATION_FAILURE = 1
HTTP_INVALID_STATE = 2
HTTP_PROCESSING_FAILED = 3.
"STEP-6 : Read HTTP RETURN CODE
CALL METHOD L_HTTP_CLIENT->RESPONSE->GET_STATUS
IMPORTING
CODE = L_HTTP_STATUS_CODE
REASON = L_STATUS_TEXT .
WRITE: / 'HTTP_STATUS_CODE = ',
L_HTTP_STATUS_CODE,
/ 'STATUS_TEXT = ',
L_STATUS_TEXT .
"STEP-7 : READ RESPONSE DATA
CALL METHOD L_HTTP_CLIENT->RESPONSE->GET_CDATA
RECEIVING DATA = L_RESULT .
"STEP-8 : CLOSE CONNECTION
CALL METHOD L_HTTP_CLIENT->CLOSE
EXCEPTIONS
HTTP_INVALID_STATE = 1
OTHERS = 2 .
"STEP-9 : PRINT OUTPUT TO FILE
CLEAR : L_XSTRING, L_OUT_TAB[].
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
TEXT = L_RESULT
IMPORTING
BUFFER = L_XSTRING
EXCEPTIONS
FAILED = 1
OTHERS = 2.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
BUFFER = L_XSTRING
TABLES
BINARY_TAB = L_OUT_TAB .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:AMEYHTTP_POST_OUTPUT.xml'
TABLES
DATA_TAB = L_OUT_TAB .
Also, following is the detailed link for use of HTTP_CLIENT class: -
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/1f/93163f9959a808e10000000a114084/content.htm
Also, in below link, you can ignore XI specific part and observe how its sending XML to external URL:-
(I know it describes call to SAP XI server's URL, but it can be used to call any URL)
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/ae388f45-0901-0010-0f99-a76d785e3ccc
In addition to all above, following configs to be present at ABAP application server: -
1. The hostname used to URL should be present in SAP ABAP application server's 'hosts' file.
2. Security certificate (if available) for URL to be called must be installed in SAP ABAP application server.
Let me know if you achieve any progress with it... -
How to send XML using UTL_HTTP
I am trying to workout how to send XML data to a webserver using UTL_HTTP but am not getting any reply
I need to submit the following XML document to a server "http://api.fastsms.co.uk/api/xmlapi.php" Their instructions are "The XML Document should be posted unencoded, with a UTF-8 character set as parameter 'xml'"
If I submit the following XML on their test form
<?xml version="1.0"?>
<apirequest version="1">
<user>
<username>**USER**</username>
<password>**PASSWORD**</password>
</user>
<application>
<name>Example Application</name>
<version>1.0</version>
</application>
<inboundcheck lastid="10711399"/>
</apirequest>
I get an XML response back with the messages in my inbox.
This is the code I am trying to use to accomplish the same from PL/SQL : I know a response is coming back as there is header information - just no content. What am I doing wrong ?
l_xml VARCHAR2(5000);
req utl_http.req;
resp utl_http.resp;
header_name VARCHAR2(256); -- Response header name
header_value VARCHAR2(1024); -- Response header value
response_text VARCHAR2(4000); -- Response body
l_url VARCHAR2(100);
BEGIN
l_xml := 'xml=<?xml version="1.0"?>';
l_xml := '<apirequest version="1">';
l_xml := '<user>';
l_xml := '<username>**USER**</username>';
l_xml := '<password>**PASSWORD**</password>';
l_xml := '</user>';
l_xml := '<application>';
l_xml := '<name>Example Application</name>';
l_xml := '<version>1.0</version>';
l_xml := '</application>';
l_xml := '<inboundcheck lastid="10711399"/>';
l_xml := '</apirequest>';
-- Open HTTP connection
l_url := 'http://api.fastsms.co.uk/api/xmlapi.php';
req := utl_http.begin_request(l_url,'POST',utl_http.HTTP_VERSION_1_1);
-- Set headers for type and length
utl_http.set_header(req,'Content-Type','application/x-www-form-urlencoded');
utl_http.set_header(req,'Content-Length',to_char(length(l_xml)));
-- Write parameter
utl_http.write_text(req,l_xml);
-- Read response file
resp := utl_http.get_response(req);
-- Print out the response headers
FOR i IN 1 .. utl_http.get_header_count(resp) LOOP
utl_http.get_header(resp,i,header_name,header_value);
logging_pkg.info(header_name || ': ' || header_value);
END LOOP;
-- Print out the response body
BEGIN
LOOP
utl_http.read_text(resp,response_text);
logging_pkg.info(response_text);
END LOOP;
EXCEPTION
WHEN utl_http.end_of_body THEN
logging_pkg.info('End of body');
END;
-- close http connection
utl_http.end_response(resp);
EXCEPTION
WHEN utl_http.end_of_body THEN
utl_http.end_response(resp);
END;
Cheers,
BrentHi Billy
Yikes - how embarassing ! Thanks for pointing out my beginners mistake there. I've fixed my code - and also implemented the substitutions of parameters like you suggested - I like that approach.
Unfortunately the end result is no better - the line
utl_http.read_text(resp,response_text);
Still returns nothing back
The headers that are coming back are
Date: Thu, 04 Jul 2013 08:31:56 GMT
Server: Apache/2.2.16 (Ubuntu)
X-Powered-By: PHP/5.3.3-1ubuntu9.3
Expires: Thu, 19 Nov 1981 08:52:00 GMT
Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0
Pragma: no-cache
Vary: Accept-Encoding
Content-Length: 0
Content-Type: text/html; charset=UTF-8
Connection: close
I guess I will need to try chasing it with the fastsms vendor so see if they can check my incoming request and see if there are any glaring problems. I know the xml is correct as I am now logging the xml string just before I send it and when I take that string and put it in their test form it works perfectly - something else in the puzzle is missing. I've had no experience using utl_http before - perhaps it's no possible to read the xml repsonse using this ?
Anyway, thanks for your help Billy.
ps - How do you paste your code into your message to get that formatting ?
Cheers,
Brent -
How to send a message from server to a particular client
Hi all,
I need to send a message from one host to another host which are connected in local domain. Now I'm able to send a message from client to server and vice versa but what I need is the server should route that message which I send through one client to another host(client) .
How can I do that ?
Please give me some ideas how to do that .
Thanks in advance
Edited by: m.parthiban on Mar 5, 2008 1:20 PMejp, thanks for your reply . can you please explain me bit more by providing code snippet ?
This is what I have done till now :
MyServer:
package connection;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import java.net.ServerSocket;
import java.net.Socket;
public class MyServer {
* @param args
public static void main(String[] args) {
String ss ="",temp ="";
Socket clientLink=null;
try {
ServerSocket sockServer = new ServerSocket(6000);
while(true) {
clientLink = sockServer.accept();
System.out.println("Connection Established");
InputStreamReader isr = new InputStreamReader(clientLink.getInputStream());
BufferedReader bufReader = new BufferedReader(isr);
// System.out.println("buf "+bufReader.readLine());
try {
while ((temp=bufReader.readLine())!=null) {
ss+=temp;
System.out.println("ss "+ss+"Temp "+temp );
System.out.println("Client > "+ss);
} catch (IOException e) {
System.out.println("while reading");
e.printStackTrace();
OutputStreamWriter osw = new OutputStreamWriter(clientLink.getOutputStream());
PrintWriter pw = new PrintWriter(osw,true);
pw.write("Welcome -by Server !!!");
pw.flush();
clientLink.shutdownOutput();
clientLink.close();
} catch (IOException e) {
System.out.println("Can't able to connect");
e.printStackTrace();
}MyClient:
package connection;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import java.net.Socket;
import javax.swing.JOptionPane;
public class MyClient {
* @param args
public static void main(String[] args) {
try {
String serverMsg="",temp="";
Socket client = new Socket("127.0.0.1",6000);
PrintWriter pw = new PrintWriter(client.getOutputStream(),true);
pw.write("Hi ,Accecpt me");
pw.flush();
// pw.close();
client.shutdownOutput();
InputStreamReader isr = new InputStreamReader(client.getInputStream());
BufferedReader bufRead = new BufferedReader(isr);
while ((temp=bufRead.readLine())!=null) {
serverMsg +=temp;
System.out.println("Server > "+serverMsg);
JOptionPane.showMessageDialog(null, serverMsg);
client.shutdownInput();
client.close();
} catch (IOException e) {
System.out.println("Failed to connect");
e.printStackTrace();
}Once again thanks for the time you spend to reply me.
Maybe you are looking for
-
Problems using mathml XML Schema in XMLDB
I have successfully loaded the hierarchy of XML Schema definition documents for the current 'mathml' by adjusting the relative paths in all include and import statements, and by forcing the load to overcome cyclic dependency issues. However when I tr
-
I tried everything and iTunes is still not installing. And I keep receiving that message and this one: There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support pers
-
How well does the Droid Charge do when dropped accidentally?
how well does the Droid Charge do when dropped accidentally? any screen or internal damages? I'm probably going to have some kind of rubberized case.
-
Drag & drop behaviour / event handling / double click behaviour: · If a document info record is dragged from the result ALV grid to a specific tree node, there should come up a decision popup, asking if the document should be inserted as BOD i
-
Microsoft Access and Oracle Forms
Hello All, I have a requirement pertaining to fetching data from Microsoft Access Tables from an Oracle Form and posting that data in an oracle Database 9i eventually.The exact entities from Access Databse needs to be replicated with data upload thro