How to sent the Data as attachemnt to an Email thru Programatically.
Hi All,
we have an Requirement that, We need to sent the Data as attachemnt to an Email through Programatically.
Is there any Function Module or Any other way to do this?
Kindly Reply.
Thanks & Regards,
N.L.
Hi N.L.,
1. We can send files with attachment.
However, There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m.
Similar Messages
-
How to sent the data reading in labview to excel datasheet
Hi,
I have aquire the current input from Cb68LP connector block to the labview.Thank a lot
But I not sure how to sent the data to the excel datasheet(with row and column).
thankHi.
You can save your data as "Spreadsheet-File". I my case I aquire digital data.
the channels are the rows and the pattern are the columns.
The Spreadsheet-File you can save as .txt then you can open it directly
in Excel.
Attachments:
wf.JPG 194 KB -
How to Hightlight the Data in Jsp Page
How to Hightlight the Data in Jsp Page,
I am doing doing search page,based on values given search page those are sent to servlet,in servlet based on some conditions if particuler id i am getting then i am redirecting to Respective jsp page with highlight the data from database..
Thanks in advance..."Highlighting data in JSP sounds strange".
Without looking at your search specific algorithms I feel you are finally going to display a page (HTML content) to user which contains highlighted text. Highlighting is not directly related to server side language you use (JSP, ASP, PHP etc.). This is purely HTML and CSS. However, server side script (such as JSP) should generate HTML content for getting highlight effect.
Following HTML shows highlighted text using background-color property on span element.
<html>
<head>
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
</head>
<body>
<p style="font-size:1.1em">This is a long paragraph which contains <span style="background-color: yellow;">highlighted text</span> and non highlighted text.</p>
</body>
</html>Thanks,
Mrityunjoy
Edited by: mrityunjoy on 14 Jun, 2010 3:30 AM -
Hi Experts,
I need small information.when messages are gone into queue state due to one message
When an EDI file came into wrong format and with that some messages are gone into queue state in MONI.
if i cancel the first message then remaining all the messages are processing successfully.
So from that cancel message i want sent the data manually as business needs that data.
Can all please tell me how to send the data manually with steps.
Thanks in Advance.
BhaskarHi,
I think you are talking about QoS "EOIO", in which all messages are porcessed in FIFO order and whenever the preceeding message get stuck due to error in the queue, then all the messages are stoped. And yes as soon as you will cancel the message which went into error all the remaining messages will automatically will be delivered.
In my opinion since QoS is EOIO then it will be not possible to sent the data mannually, you can do one thing, do not cancel the message. Try to correct the messge and then resend it.
Regards,
Sarvesh -
How to pass the data from a input table to RFC data service?
Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks. -
How to select the data from a Maintainance View into an internal table
Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban -
How to download the data which is in the table?
how to download the data which is in the table?
every field data in the table i want to download and once the download is finished then i have to set the flag as 'download is finished ' as one field in table?
can any one help me in this.
Phani.
Edited by: phani kumarDurusoju on Jan 9, 2008 6:36 AMOne way is to Download the data Directly from the database table using the path SE11->Give table name ->Execute -> system ->List ->Save ->Local File
There u can downlaad the data .
The ither way is to use the code
The Following Code will be helpfull to You
Data :ITAB TYPE TRUXS_T_TEXT_DATA,
FILE TYPE STRING.
C_ASC TYPE CHAR10 VALUE 'ASC',
DATA: L_STATUS TYPE C,
L_MESSAGE TYPE PMST_RAW_MESSAGE,
L_SUBJECT TYPE SO_OBJ_DES.
DATA: L_FILELENGTH TYPE I.
PERFORM download_to_pc
TABLES
itab
USING
filename
c_asc
c_x
CHANGING
l_status
l_message
l_filelength.
FORM DOWNLOAD_TO_PC TABLES DOWNLOADTAB
USING FILENAME
FILETYPE TYPE CHAR10
DELIMITED
CHANGING STATUS
MESSAGE TYPE PMST_RAW_MESSAGE
FILELENGTH TYPE I.
DATA: L_FILE TYPE STRING,
L_SEP.
L_FILE = FILENAME.
IF NOT DELIMITED IS INITIAL.
L_SEP = 'X'.
ENDIF.
STATUS = 'S'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = L_FILE
FILETYPE = FILETYPE
WRITE_FIELD_SEPARATOR = L_SEP
IMPORTING
FILELENGTH = FILELENGTH
TABLES
DATA_TAB = DOWNLOADTAB
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
STATUS = 'E'.
CASE SY-SUBRC.
WHEN 1.
MESSAGE = 'gui_download::file write error'.
WHEN 2.
MESSAGE = 'gui_download::no batch'.
WHEN 3.
MESSAGE = 'gui_download::gui refuse file transfer'.
WHEN 4.
MESSAGE = 'gui_download::invalid type'.
WHEN 5.
MESSAGE = 'gui_download::no authority'.
WHEN 6.
MESSAGE = 'gui_download::unknown error'.
WHEN 7.
MESSAGE = 'gui_download::header not allowed'.
WHEN 8.
MESSAGE = 'gui_download::separator not allowed'.
WHEN 9.
MESSAGE = 'gui_download::filesize not allowed'.
WHEN 10.
MESSAGE = 'gui_download::header too long'.
WHEN 11.
MESSAGE = 'gui_download::dp error create'.
WHEN 12.
MESSAGE = 'gui_download::dp error send'.
WHEN 13.
MESSAGE = 'gui_download::dp error send'.
WHEN 14.
MESSAGE = 'gui_download::ubknown dp error'.
WHEN 15.
MESSAGE = 'gui_download::access denied'.
WHEN 16.
MESSAGE = 'gui_download::dp out of memory'.
WHEN 17.
MESSAGE = 'gui_download::disk full'.
WHEN 18.
MESSAGE = 'gui_download::dp timeout'.
WHEN 19.
MESSAGE = 'gui_download::file not found'.
WHEN 20.
MESSAGE = 'gui_download::dataprovider exception'.
WHEN 21.
MESSAGE = 'gui_download::control flush error'.
WHEN 22.
MESSAGE = 'gui_download::Error'.
ENDCASE.
ENDIF.
ENDFORM. "download_to_pc
At The End Reward points.
Please it's Required.
Thanks ,
Rahul -
How to add the date field in the dso and info cube
Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KKmy prob is solved
KK -
How to read the data in excel sheet
Dear sir,
How to read the data in excel sheet when i recieve a data serial communication... ie i have store a data in excel such that
Cell A Cell B
A Apple
B Ball
C Cat
D Doll
when i recieve A from serial communication i have to display Apple, and when i recieve B i have to display Ball and so on..Hi,
I would recommend you to have a look at the VI attached. It makes use of a VI named 'Read from Spreadsheet' to read the row and column data from the tab delimited excel file. The read data is then searched for the Alphabet specified and finally returns you the corresponding string. The test file used to validate the operation of the VI is also attached.
Trust this would help you solve the issue.
Regards,
Sagar G Yadav | Application Engineer | National Instruments
Attachments:
read_from_excel.vi 10 KB
Book1.txt 1 KB -
How to get the data from multiple nodes to one table
Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
IndraHI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM. -
How to get the data from pcl2 cluster for TCRT table.
Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.ChPL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh -
How to get the data from Pooled Table T157E.
Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil -
How to bring the data from application server to presentation server
hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
MFL1(9) TYPE C,
MFL2(5) TYPE C,
MFL3(9) TYPE C,
MFL4(2) TYPE C,
MFL5(8) TYPE C ,
end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
setid(8) type c,
end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = MFILENAME
FILETYPE = 'ASC'
TABLES
data_tab = matab1
EXCEPTIONS
file_write_error = 1
invalid_type = 2
no_authority = 3
unknown_error = 4
OTHERS = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
MFL5 = '0'.
CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
MFL5 = ''.
ENDIF.
concatenate MFL1 ',' into MFL1.
concatenate MFL1 ',' into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
"evaluate
*& Form GET_SOURCE
text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM. "GET_SOURCEHi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant -
How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.
If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/ -
How to store the data coming from network analyser into a text or excel file
Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi 43 KBFirst let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Maybe you are looking for
-
Is there a way to purchase creative cloud without a ever renewing yearly contract?
I graduate in about 6 months and need cs6 master suite but the terms of the contract say if I don't cancel, which may be hard because I will be joining the military, that it will be renewed automatically and I am wondering if there is a way to avoid
-
Transferring large volume of files from mac to PC?
Hi i have a mac with osx 10.4.8 and a pc, i need to transfer a large amount of files from mac to pc (around 200GB) Now i have lots of external HDs which are all used by either the PC or the macs. the ones formatted for the macs cannot be read atall b
-
Transfer of IDOC from R/3 to XI - SM58 error
Hi i am working on scenario where the output of the delivery created in R/3 is a idoc to be sent to XI. When i create a delivery of type LO(without reference to Sales order) the IDOC gets passed on to XI successfully But when i create a delivery
-
Hi all I've been on to FAQ and then used PSE Updater to load the latest Camera Raw plug in. If I now go into the updater it tells me that my PSE is all up to date. However, when I try and load an .ORF file into Organiser I still get the message tha
-
How to dispatch an event to the host application?
Can I create a keyboardEvent and dispatch it to the host application? I'm trying to create an onscreen keyboard, so on every mouseUp event, a corresponding keyboardEvent is created and dispatched to the host application. Is it even possible to dispat