How to set 3rd Party Reverse Proxy for smp 3.0 ?

Hi am new to SMP 3.0 . Please help me out .

hi am fallowing the steps in SyBooks Online for reverse proxy settings.
I added the below proxy settings in Apache2.2\conf\httpd.conf .
Listen 8080
<VirtualHost *:8080>
        ServerName proxy-server
          ErrorLog "C:/Apache2.2/logs/error.log"
          TransferLog "C:/Apache2.2/logs/access.log"
             <Location />
              ProxyPass http://172.22.26.199:8080/
              ProxyPassReverse http://172.22.26.199:8080/
</Location>
    </VirtualHost>
After adding this proxy setting am unable to run apche server am getting error like "The requested operation has failed " . How to resolve this error ?

Similar Messages

How To configure Apache As Reverse Proxy for SharePoint Application

Hi,
I recently integrated Apache as ReverseProxy for SharePoint 2010. When accessing the SharePoint application via the reverse proxy url e.g. http://<reverse-proxy-url>/SitePages/Home.aspx the images/css and JavaScript files does not comeup
fine.
I had defined the following mapping in the httpd.conf file.
ProxyPass /SitePages http://<actual-url>/SitePages
<Location /SitePages>
ProxyPassReverse http://<actual-url>/SitePages
SetEnv force-nokeepalive 1
</Location>
Regards,
Bunty Ray

Hi Trevor,
I did not understand your point. Currently i tried the following in the httpd.conf as well, but still did not help
######Mapping SharePoint Server#######
ProxyPass /SitePages http://<actual-url>/SitePages
ProxyPass /WebResource.axd http://<actual-url>/WebResource.axd
ProxyPass /ScriptResource.axd http://<actual-url>/ScriptResource.axd
<Location /SitePages>
SetOutputFilter INFLATE;proxy-html;DEFLATE
ProxyHTMLMeta On
ProxyHTMLEnable On
ProxyHTMLExtended On
ProxyHTMLLogVerbose On
ProxyPassReverse http://<actual-url>/SitePages
ProxyHTMLURLMap /SitePages http://<actual-url>/SitePages ec
ProxyHTMLURLMap http://<actual-url>/SitePages /SitePages ec
SetEnv force-nokeepalive 1
SetEnv force-proxy-request-1.01
SetEnv proxy-initial-not-pooled 1
</Location>
<Location /ScriptResource.axd>
SetOutputFilter INFLATE;proxy-html;DEFLATE
ProxyHTMLMeta On
ProxyHTMLEnable On
ProxyHTMLExtended On
ProxyHTMLLogVerbose On
ProxyPassReverse http://<actual-url>/ScriptResource.axd
ProxyHTMLURLMap /ScriptResource.axd http://<actual-url>/ScriptResource.axd ec
ProxyHTMLURLMap http://<actual-url>/ScriptResource.axd /ScriptResource.axd ec
SetEnv force-proxy-request-1.01
SetEnv force-nokeepalive 1
SetEnv proxy-initial-not-pooled 1
</Location>
<Location /WebResource.axd>
SetOutputFilter INFLATE;proxy-html;DEFLATE
ProxyHTMLMeta On
ProxyHTMLEnable On
ProxyHTMLExtended On
ProxyHTMLLogVerbose On
ProxyPassReverse http://<actual-url>/WebResource.axd
ProxyHTMLURLMap /WebResource.axd http://<actual-url>/WebResource.axd ec
ProxyHTMLURLMap http://<actual-url>/WebResource.axd /WebResource.axd ec
SetEnv force-proxy-request-1.01
SetEnv force-nokeepalive 1
SetEnv proxy-initial-not-pooled 1
</Location>
<Location /_layouts>
SetOutputFilter INFLATE;proxy-html;DEFLATE
ProxyHTMLMeta On
ProxyHTMLEnable On
ProxyHTMLExtended On
ProxyHTMLLogVerbose On
ProxyPassReverse http://<actual-url>/_layouts
ProxyHTMLURLMap /_layouts/1033/styles/Themable http://<actual-url>/_layouts/1033/styles/Themable ec
ProxyHTMLURLMap http://<actual-url>/_layouts/1033/styles/Themable /_layouts/1033/styles/Themable ec
SetEnv force-proxy-request-1.01
SetEnv force-nokeepalive 1
SetEnv proxy-initial-not-pooled 1
</Location>
Regards,
Bunty Ray

How to resolve: 3rd party tool work for nvarchar only

I have following settings in my database:
select * from nls_database_parameters
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_CHARACTERSET     AL32UTF8
NLS_RDBMS_VERSION     11.1.0.6.0
...as you can see from above, varchar is support unicode too and database is working fine for most of application connect to my database, they store and display foreign characters correctly.
However, I got a 3rd party tool, when it export from my database, all foreign character were not able to display correctly until I tried change one of column to nvarchar.
so, seems this tool only work correctly for utf-8 when the data type is nvarchar. but I do not want to change all of varchar columns to nvarchar.
is there anyway to resolved this situation?
Thanks

>
OK. Some follow up questions:
1. The character you test is both Traditional and Simplified Chinese. The data you want to see in the result is Traditional Chinese, Simplified Chinese or all of Unicode?
>
For this test, The character I tested is Simplified Chinese. obviously, I want the result is Simplified Chinese too --I want to see the result same as I have in the database.
However, I do not want it limit to support only either Traditional or Simplified. it should support both, and more, it should support other languages. since others tool such as sql developer support.
>
2. What editor do you use to view the txt file?
>
Windows notepad (on windows XP)
>
3. What is your OS code page? Look in Registry at: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Nls\CodePage\ACP
>
1252
>
4. Do you have a hex-mode capable editor or viewer where you could see the contents of the txt file in hex? The character that I see pasted on the forum is Control-Z (0x1a), which is basically MS-DOS end-of-file character.
>
yes you are right, I got 0x1A too. I use Hex Editor XVI32. -- this is not what I want see. even worse, no matter what character, it always give me 0x1A. and number of "0x1A" is same as the number of characters.
-- Sergiusz

How to use 3rd party jar files for xml transform

Hi all,
Am using OAS9.0.4 and I deployed my .ear successfully.
In my application am using 4 jar files for xml transformation. (xerces.jar, xalan.jar, xml-apis.jar,xercesImpl.jar)
OAS has its own xmlparserv2.jar file. Its using this jar file for transforming xml data and not even looking for above mentioned 4 jar files.
In opmn.xml, I provided these 4 jar files in to class path. Then also it didn't effect my output.
I also tried as put these 4 jar files into j2ee\home\applib directory, but o result.
Can anybody tell me where should I keep these 4 jar files in OAS and OAS should use these 4 jar files instead of its own xmlparserv2.jar for transforming data.
Thanks in Anticipation,
Regards,
RK

Add the Xbootclasspath variable in the java-options field. It will somewhat look like the following in your opmn.xml file
<process-type id="<OC4J Instance Name>" module-id="OC4J">
<module-data>
<category id="start-parameters">
<data id="java-options value="........... -Xbootclasspath^/a:<location of your jar files>" />
Ensure to use th ^/a (append) signature
Regards,
Chirag

Setting apache reverse proxy for EP6SP2

Hi friends,
I want to set apache reverse proxy for EP6SP2. But after doing the following changes, it is showing the SAP J2EE Engine documentation page.
The following changes has been dont to httpd.conf:
NameVirtualHost 1.1.1.1:80
<VirtualHost 1.1.1.1:80>
ProxyRequests Off
ServerName ep6.xyz.com
ProxyPreserveHost On
proxyPass / http://ep6.xyz.com:50000/
proxyPassReverse / http://ep6.xyz.com:50000/
ErrorLog logs/base.80.error.log
CustomLog logs/base.80.custom.log common
</VirtualHost>
Help needed.
Regards,
Nilz

Hi,
I have a problem with my proxy:
ssl.conf.in like
ProxyPass /irj http://debmsu06.server.###.de:50300/irj
ProxyPassReverse /irj http://debmsu06.server.###.de:50300/irj
RewriteRule ^/$ /irj/portal [R]
If I use URL:
https://bebuyer.###.de/ goto https://bebuyer.###.de/irj/portal
but if I use
https://bebuyer.###.de/irj/
I get the info:
https://bebuyer.###.de/irj/HTTPS:/bebuyer.###.de:443/irj/index.html
What is happened? How I can redirect to /irj/portal?
Of course I can use
http://debmsu06.server.###.de:50300/irj/
Could you please give me some tips?
Best Thanks!
Heren Zhou

Reverse Proxy for OIF on iPlanet

hi,
I am trying to implement reverse proxy for OIF r3 Identity Provider on iPlanet.
I configured the obj.conf of iPlanet accordingly.
<Object name="passthrough1">
Service fn="service-passthrough" servers="http://backendIDP.com:80"
Error reason="Bad Gateway" fn="send-error" uri="C:/Sun/WebServer6.1/docs/badgateway.html"
</Object>
<Object Default>
NameTrans fn="assign-name" from="/fed/" name="passthrough1"
NameTrans fn="assign-name" from="/fed/*" name="passthrough2"
</Object>
when i tried the IDP initiated proxy url in a browser like (http://proxy.com/fed/idp/initiatesso?providerid=XXXXXXXX&returnurl=YYYY)
immediately its being forwaded to backend Identity Provider for authentication like(http://backendIDP.com/sso/jsp/salogin.jsp?doneURL=/user/loginsso&refID=id-ysJ-7-1PR9k-QI2bg9zZkPdyHPw-)
I was expecting that it is redirected to Proxy URL like (http://proxy.com/sso/jsp/salogin.jsp?doneURL=/user/loginsso&refID=id-ysJ-7-1PR9k-QI2bg9zZkPdyHPw-)
At the end it is giving me null pointer exception instead of return URL "YYYYY"
Does any one know how to fix the error.

web or weblogic.xml files on your RPS needs to define for each case like if inbound port is 7011 then send it to PIA:7011 and http and the same for 7012 then send it to PIA:7012 and https. in the webprofile configuration for your RPS profile, set both https and http relative URLS. I believe you could start using this info and I am sure you could figure out the rest.

Setting up a Reverse proxy on lion server

Can someone point an osx server newb like me to some documents/how to on setting up a reverse proxy on lion server. It appears apples docs online are still for SL
Many thanks
Stephen

Lion server is so frustrating. Good grief.
It broke my setup. So I tried to re-follow the instructions at http://www.bensoftware.com/securityspy/helpssl.html to setup a reverse proxy to wrap an otherwise insecure connection into an SSL connection.
I can get the SSL part working (connections to https://127.0.0.1 work) but it's not proxying. Per the instructions, I put the following two lines near the bottom of the httpd-ssl.conf file:
RewriteEngine On
RewriteRule ^/(.*) http://127.0.0.1:8000/$1 [P]
Just above </VirtualHost>
Instead of getting the proxy, I get the same regular SSL connection page displayed ("Hello world"). In other words, after getting the SSL stuff setup, adding these two lines didn't do anything. Any idea what I'm doing wrong?

Developing 3rd party UWL Connectors for People soft system or other Java sy

Hi Everyone
We have one requirement that is u201CDeveloping 3rd party UWL Connectors for People soft system or other Java systemu201D and get the workflows from those system and display in portal though UWL.
We used u201CUWL Custom Connector APIu201D and written all the required methods.
Could any one help us u201CWhere can we specify the 3rd party system details?u201D
If possible please send some sample coding for it.
Thanks in advance
Sat

Hi Satya!
Like the default SAP backend UWL connectory your 3rd-party connector should make use of a PCD System Object. This system is a mere java component with nothing more than a portalapp.xml defining all the system properties.
Create a system in the portal system landscape based on the System PAR you depoyed.
For every UWL connector you create in portal you define a system alias. This alias has to match the one of your new system object.
And now for the sad part: I didn't find any clue yet about how to access the system from a custom UWL connector. The system alias is available in the method getItems(), but no hint whatsoever how to get the system object to the alias.
I'm still investigating this, since i'm exactly at this point.
Regards,
Juergen

Issues using IIS 8.5 with ARR 3.0 as Reverse Proxy for Lync 2013

Dear reader, after searching for a day without finding a solution to my problem I end up here ;-)
Working Lync 2013 environment (gradually adding functionality) consisting of 2 FE servers, Persistent Chat Server, Web Apps server, Edge Server, Reverse Proxy Server (IIS 8.5/ARR 3.0), SQL Server.
Set up a fresh Windows 2012 R2 with IIS 8.5, installed ARR 3.0 and followed along this
TechNet article.
So far so good, external clients (incl. mobile phone apps) can all connect.
Now trying to add Web Apps to the reverse proxy, which is slightly different from the others by not forwarding 80/8080 and 443/4443, but just 80 and 443 to internal Web Apps server.
After creating the server farm/URL rewrite, browsing to the webapps.FQDN/hosting/discovery ends up with a 404 error (instead of XML, which is shown when try from the LAN).
After moving this rewrite rule to the top, it started working, but now my lyncdiscover.FQDN stops working.
Ofcourse moving the webapps rule down restores the lyncdiscover.
Any ideas? (everything setup as described in above mentioned TechNet article, so using wildcards. Tried fiddling around with webext.* and lyncdiscover.* and so, but no luck. (I'm completely new to ARR)
Thanks,
Barry

Can you confirm that for each URL Rewrite Rule, you have an {http_host} record that matches something like webext.* as you referenced above and as seen in step 15 here:
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
It might help if you posted a screenshot of your URL rewrite rules.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

How to configure ARR to Reverse Proxy to RD Gateway

We have an ARR server in the DMZ working fine providing reverse proxy for our internal Exchange Server 2013 environment and I've tried to create rules to allow access to the internal RD Gateway as well but when testing from an external client it never connects.
Does anyone have any configuration notes for how ARR should be configured to allow reverse proxy of RD Gateway?
Cheers for now
Russell

Hi,
I think you can refer this below article might get some insight from this case.
RD Gateway/RD Web Access & IIS Reverse Proxy/ARR
http://forums.iis.net/t/1210901.aspx?RD+Gateway+RD+Web+Access+IIS+Reverse+Proxy+ARR
Apart seem this as the configurations need to be done in IIS side, I would like to suggest you post the question in our IIS forum for further assistance.
http://forums.iis.net/
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

3rd Party Plug-ins for Illustrator

EskoArtwork has a Dynamic Barcode 3rd party plug-in for Illustrator that is listed on the Adobe wesbiste for Illustrator CS6. I puchased it and downloaded it but during the install I get a message saying it can't find a compatible Adobe Illustrator installation on my computer (I have CS6 installed). Upon reading the information on EskoArtwork's package, it says it is only compatible with CS4, CS5 and CS5.5. Is there a way to get this to work with CS6? If not, I would suggest Adobe take it off their list of Plug-In's for CS6.
Also - if it is not compatible, does anyone know of a similar plug-in that would generate and insert bar codes into packaging designs?
Thanks!

You'll probably need to ask EskoArtwork about this.
In past versions, I've been able to move plugins from the plugin directory for the old version to the new version, and often it worked. (YMMV, it depends on changes in the SDK.) You might try creating empty directories for a CS5 version number to see if the installer will work.

Reverse Proxy for SharePoint 2013

Hi,
I need to setup SharePoint 2013 environment which needs to be accessible from mobile devices e.g. iPAD/Android, for reverse proxy, I am looking at apache or IIS ARR since UAG is going to be deprecated. So far any one setup apache (on
RHEL 6.x)
or IIS ARR(on W2K8R2) successfully as reverse proxy for SharePoint 2013 access? Is there any issue? and which SharePoint authentication method should be configured?
Must is be Form based authentication? As I read some articles it seems ARR supports Windows authentication. Thanks in advance.

IIS ARR doesn't authenticate users, it is a pass-through (unlike UAG which can do auth or anon). Both IIS AAR and the new Web Proxy Role in Server 2012 R2 do not work with SharePoint 2013 Apps.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

How to set a default colour & thickness for rectangle in preview?

How to set a default colour & thickness for rectangle(annotation) in preview ? Because every time that I choose for example red and thickness 1 it reverts to orange and 3 next time .

Doesn't appear to be a default setting. Peruse the webpage for Secrets at http://secrets.blacktree.com/ for a possible setting.

How to set a new SCSI number for a second drive?

How to set a new SCSI number for a second drive?
Walter

Walter,
This web site gives a good diagram:
http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
AO . .
A1 . .
A2 . .
If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
If you short out the pins beside AO .__. , you have designated SCSI ID One.
If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
Jim
PS
CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3.

How to set 3rd Party Reverse Proxy for smp 3.0 ?

Similar Messages

Maybe you are looking for