How to set a data packet to red status.
I have a big load which ended mostly in green data packets except for two, which were red, because of server / resources issues. I tried to update them manually and they turned yellow but all processes ended and they are still in yellow. I want to try a manual update again, but I can't because they have to be in red status. How can i change the status of a single packet? This was a pretty hard load, and I can't afford to loose what so far made it okay to the Infocube.
Hi,
You need to force the request to red and then ur datapacket will turn to red then update the two packets manually then force it to green.
Regards,
Malar
Similar Messages
-
How to set the data packet in order??
we have 20 datapackets that is in sequence order how to set in order wise ?
Example:- this is the scenario Data packets is in this order 20,1,10,5,9,13,4,8,13,2,15,19,14Like this
I have to set in order wise how to doit??????HI
I think you sjust should use a process chain.
Call transaction RSPC and build it within the order needed.
regards
Tom -
How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
The following is my configuration in the conf\mapViewerConfig.xml:
<map_data_source name="mvdemo12"
jdbc_host="127.0.0.1"
jdbc_sid="orcl12c1"
jdbc_port="1522"
jdbc_user="mvdemo"
jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
editable="true"/>
<!-- **** -->
But it does not work.
After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
Does anyone know it?
Thanks,For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
//mypdb1.foo.com as described in the README,
- MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
<map_data_source name="myds"
jdbc_host="foo.com"
jdbc_sid="//mypdb1.foo.com"
jdbc_port="1522"
/>
For 11.1.1.7.0 use a container_ds instead.
i.e. instead of using
<map_data_source name="my_12c_test"
jdbc_host="mydbinstance"
jdbc_sid="pdborcl12c"
jdbc_port="1522"
jdbc_user="mytestuser"
jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
jdbc_mode="thin"
number_of_mappers="6"
allow_jdbc_theme_based_foi="false"
editable="false"
/>
use
<map_data_source name="my_12c_test"
container_ds="jdbc/db12c"
number_of_mappers="6"
allow_jdbc_theme_based_foi="false"
editable="false"
/>
In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
Property
url jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
Add a JDBC resource for that newly created pool
Use that in mapviewerconfig.xml as above -
How to set a date range for date field ?
Dear Experts,
Scenario:
I have a query in validating the date field in my BSP application. My application is for maintain infotype 0023 Other/Previous Employers online by employees in the company.
As per our design we are maintaining the all employment details of the employee both ( with in the current company / previous employment outside the company) in the same infotype.
Every employee will have a hiring date within the SAP HR system. We consider this date as the cutoff date between current and previous employment in our application. When the employee updating the details wia BSP page I need to check the following.
Record inside current company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) greater than or equal HIRING DATE and END DATE(ENDDA) should be greater than FROM DATE (BEGDA).
Record outside current Company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) less than or equal HIRING DATE and END DATE (ENDDA) should be greater than FROM DATE (BEGDA) and less than HIRING DATE.
Technical Requirement:
How to set a date range for date field, i.e. how we can limit the date range in a HTMLB date field? Can this it be achieved via standard functionality of HTMLB?
Following is the code to describe date field in my application.
<htmlb:inputField id= "ENDDA_NEW_IN"
type= "date"
doValidate= "TRUE"
showHelp= "TRUE"
disabled= "FALSE"
width= "183"
style= "cssTextAreadate"
value= "<%='99991231'%>"/>
Thanks a lot in advance for your assistance and help.
Cibinu2026
Edited by: cibin kuruvilla on Nov 12, 2008 11:13 AMHi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
<p>Blair Wheadon</p>
<p>Product Manager, Crystal Reports</p> -
How to set Oracle Data Integrator Timeout paramter value as unlimited
Hi
Can any one help me how to set Oracle Data Integrator Timeout (ODI menu>User Paramter>Oracle Data Integrator Timeout > paramter value as unlimited.
By default it is 30 and i want to change it as unlimited.
I am connecting linux box through windows using citrix and opened ODI and start the scenario execution (my scenario execution in loop and it will execute continuesly) after execution starts I an logout from citrix (I am not closing ODI) and after some time like 50 min my odi execution is stoped due to timeout.
my ODI execution should continue in my absence that to unlimited.
Please help me it is urgent
Regards,
PhanikanthThanks Bhabani
Is it work for unlimited in linux box because I have given operator dispplay limit(0=no limit) as 1000000 and I am unable to see the execution session details on Operator>session list
later i have changed to 10000 and click on ok and just refreshed and it is working fine
If I give mensioned below it will not impact on ODI ?
windows it is working but I have doubt on linux version
Please help me
Regards,
Phanikanth -
How to set default date value to a field on screen
How to set default date value to a field on screen and allow users to modify it ....
Hello,
In the PAI module, you need to save the changes to the database using the command MODIFY.
Follow an example:
Create or change a message in database table T100. If there is no message with the number 100 in the MYMSGCLASS message class in English, it will be created. Otherwise only the text is changed.
DATA message_wa TYPE t100.
message_wa-sprsl = 'EN'.
message_wa-arbgb = 'MYMSGCLASS'.
message_wa-msgnr = '100'.
message_wa-text = 'Some new message ...'.
MODIFY t100 FROM message_wa.
Regards. -
How to set the data fields column wide at sqlplus
Dear Sir/Madam
I would like to know how to set the data fields column wide at sqlplus
Thanks
Francissee
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch6.htm#sthref1131
and the FORMAT clause of the COLUMN command in
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12013.htm#BACHCABF -
How to set the Data Synchronisation mode for ADF BC component?
Hi All,
How to set the Data Synchronisation mode for ADF BC component
Thanks
RaghavendraCan you clarify what you mean by the data synchronization mode?
If you mean the Sync Mode, then in 10.1.3 you set this property by:
1. Selecting your DataBindings.cpx file
2. Expanding the "Data Control Usages" section in the structure window
3. Selecting the ADFBC-based data control
4. Setting the "syncMode" property in the property inspector. -
How to set this DATS parameter
Hi Pros,
I am calling function 'HR_FORMS_TIM_GET_B2_RESULTS' in the program , its input parameter is BEGDA, I transfer a date variable to BEGDA, but does not work. can not get any data. but if I run this function in SE37, I input date '20140807', successfully get result. please tell me how to set this DATS parameter?Hi,
You might be passing the date in '12.12.2014' or '12/12/2014' format. Please
use the function module 'CONVERSION_EXIT_BEGDA_INPUT' to convert the date
to internal format and then pass it to the function module.
Thanks -
How to set expiry date for a mail account?
Hi there, i'm new in Messaging Server, need help here on how to set an expiry date to a specific mail user since the mail user will be just a temporary mail user. Instead of deleting manually, is there any smarter way of doing it?
Directory Server can be set to exipre a password, indeed. That will prevent the user from logging in, when it happens. There will be no warning, or anything like that.
The account will still be on the server, and the mailbox will still contain mail. It will still receive mail.
If you want to turn an account off, you will have to make some arrangement outside Messaging Server for automating it.
You can use any kind of program you like to set the ldap attribute "mailuserstatus" to "inactive", or even "deleted" as you wish.
You can use java, "c", or any other programming tools you like. Messaging Server and Directory Server aren't written in Java, anyway. -
How to set todays date in message date input field in uix
Hello everybody,
Im using jdeveloper 9015+adf+uix
I am having an input form and in that i want to set the date input field with the current date(default value).
Does anybody of you know how I should do this.
Any help is appreciated,
Thanks in advanceHi,
Did you figure out on how to default system date in a date input field??
I have a similar requirement in OA framework. Please let me know if you have any ideas.
Thanks,
vinay. -
How to set cureent date as input field in alv
Hi Experts
I have created an Alv report.In that report i have an input field Created Date.
how to set the current date default in the alv input.Plz guideHi ,
In the internal table declare a field of type D and pass the sy-datum. this will solve ur problem.
Hope information shall be useful.
Regards
Santosh Kumaar.M -
Payroll - How to set RUN DATE in Payment Medium Workbench
Hi experts,
is it possible to set the run date in the payment medium workbench? Normally the run date is the same as the creation date. If I just try to fill in the timestamp and use another run date, no medium will be created until I set the run date = creation date.
But if I want to create the DTAUS-file now and want to set the date of the bank transfer (which is the run date, isnt it?) for the 27th of november, how do I do that? Is it possible at all without modifying the report PC00_M99_FPAYM?
Thanks for you help in advance.
DirkHi Dirk,
We have a similar problem to this. Could you please advise whether you have found a solution to this without making changes to the program itself?
Many thanks,
Rita -
How to set system date as a default value in UIX/XML page?
Example: We set default values using following statements:
<set property="inputValue" target="${bindings.PoNumber}" value="${'1234'}"/>
<set property="inputValue" target="${bindings.UserName}" value="${param.MyParam1}"/>
In JDeveloper Help, we cannot find a way to set a Date attribute's default value to today's (system) date. Any suggestions?
Also, does anyone have a reccomendation on a good book for uix/xml?
Thanks, Ali.bump
-
How to set the date picker to display only months?
I am trying to set the date picker in SSRS 2012 to allow the user just to select the months: and when I run my store procedure I get a can't convert data type from nvarchar to datetime. If I don't comment out of the Where Clause, nothing
is returned if I leave the Where Clause in.
Alter
PROCEDURE RollingReportList
AS
BEGIN
SET NOCOUNT
ON;
SELECT
distinct
[ItemDescription]
,[QuantityOrdered]
,QuanitityCost
= [QuantityOrdered]
* [Price]
,Convert(datetime,(CONVERT(CHAR(4),PE.[LastUpdated],107)
+ '-'
+ (right(CONVERT(CHAR(4),PE.[LastUpdated],112),2))))
as CurrentMonth
,Convert(datetime,(CONVERT(CHAR(3),Datename(MONTH,DATEADD(MONTH,1,PE.LastUpdated)),107)
+ '-'
+ (right(CONVERT(CHAR(4),PE.[LastUpdated],112),2))))
as NextMonth
,Name
FROM
[HQStore].[dbo].[PurchaseOrderEntry]
as PE
inner join
[HQStore].[dbo].[PurchaseOrder]
as PO
on PE.[PurchaseOrderID]
= PO.[ID]
inner join
[HQStore].[dbo].[Store]
as ST
on PE.[storeid]=ST.ID
Where
(@Start
= '01/01/2009'
and @Last
= '12/31/2010')
End
Go
Exec
RollingReportList
Any Help?Try the below....
Where (@Start = '20090101' and @Last = '20101231')
SELECT FORMAT(getdate(), 'MM')
02
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence
Maybe you are looking for
-
I was just thinking that it would be better to wipe the entire hard drive clean and reinstall some programs rather than go through and move certain things to the trash. Basically rebuild my software and file collection from the ground up, omitting wh
-
New computer, can't carry library from ext. HD
Just bought new computer last night. iTunes library has been stored on external hard drive for some time now. Installed iTunes on new computer, no music found. Default iTunes music folder location under Preferences was C:/My Music/iTunes... Changed i
-
Healing brush/clone stamp cursor is dark.
I hope I've overlooked something very simple. In CS3 on my PC, the circular cursor for healing brush and clone stamp (probably others, too) is always a contrasting color to the underlying image so the circle is always very visible. With the same pr
-
My ipod now does something I have never seen before. It syncs okay but itunes has to be closed to start with. I plug in the ipod and windows first will recognize it as removable disk. I can minimize this and it will sync most of the time. Is there so
-
How do you view iPhoto pictures in iPad?
How can I view the pictures that I saved in my MacBook Pro's iPhoto to my iPad? I read you can do it through iTunes, but how?