How to set Oracle Data Integrator Timeout paramter value as unlimited

Hi
Can any one help me how to set Oracle Data Integrator Timeout (ODI menu>User Paramter>Oracle Data Integrator Timeout > paramter value as unlimited.
By default it is 30 and i want to change it as unlimited.
I am connecting linux box through windows using citrix and opened ODI and start the scenario execution (my scenario execution in loop and it will execute continuesly) after execution starts I an logout from citrix (I am not closing ODI) and after some time like 50 min my odi execution is stoped due to timeout.
my ODI execution should continue in my absence that to unlimited.
Please help me it is urgent
Regards,
Phanikanth

Thanks Bhabani
Is it work for unlimited in linux box because I have given operator dispplay limit(0=no limit) as 1000000 and I am unable to see the execution session details on Operator>session list
later i have changed to 10000 and click on ok and just refreshed and it is working fine
If I give mensioned below it will not impact on ODI ?
windows it is working but I have doubt on linux version
Please help me
Regards,
Phanikanth

Similar Messages

  • HOW-TO Install Oracle Data Integrator

    Can anyone give me simple Instructions for Installation of the Oracle Data Integrator.
    SS

    1st step: create your schema on your database, you can create one schema for both repositories (master and work) or you can create one schema for each repository.
    2nd step: execute repcreate.bat
    3rd step: run topology and create one or more work repositories.
    You can also read the "Installation Guide" let us know if you have any issue.
    Regards,

  • How to set system date as a default value in UIX/XML page?

    Example: We set default values using following statements:
    <set property="inputValue" target="${bindings.PoNumber}" value="${'1234'}"/>
    <set property="inputValue" target="${bindings.UserName}" value="${param.MyParam1}"/>
    In JDeveloper Help, we cannot find a way to set a Date attribute's default value to today's (system) date. Any suggestions?
    Also, does anyone have a reccomendation on a good book for uix/xml?
    Thanks, Ali.

    bump

  • How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

    How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
    The following is my configuration in the conf\mapViewerConfig.xml:
    <map_data_source name="mvdemo12"
    jdbc_host="127.0.0.1"
    jdbc_sid="orcl12c1"
    jdbc_port="1522"
    jdbc_user="mvdemo"
    jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
    jdbc_mode="thin"
    number_of_mappers="3"
    allow_jdbc_theme_based_foi="true"
    editable="true"/>
    <!--  ****  -->
    But it does not work.
    After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
    Does anyone know it?
    Thanks,

    For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
    //mypdb1.foo.com as described in the README,
    - MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
      <map_data_source name="myds"
        jdbc_host="foo.com"
        jdbc_sid="//mypdb1.foo.com"
        jdbc_port="1522"
      />
    For 11.1.1.7.0 use a container_ds instead.
    i.e. instead of using
    <map_data_source name="my_12c_test"
                       jdbc_host="mydbinstance"
                       jdbc_sid="pdborcl12c"
                       jdbc_port="1522"
                       jdbc_user="mytestuser"
                       jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                       jdbc_mode="thin"
                       number_of_mappers="6"
                       allow_jdbc_theme_based_foi="false"
                       editable="false"
       />
    use
      <map_data_source name="my_12c_test"
                       container_ds="jdbc/db12c"
                       number_of_mappers="6"
                       allow_jdbc_theme_based_foi="false"
                       editable="false"
       />
    In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
    Property
    url  jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
    Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
    Add a JDBC resource for that newly created pool
    Use that in mapviewerconfig.xml as above

  • How to use a variable on columns using Oracle Data Integrator

    How to use a variable in oracle Data Integrator expically on colums.

    yes exactly,i selected update on new column,if i didn't select update on new colum then error is not coming regarding update.
    but this time error is coming on "insert new rows".
    java.lang.NullPointerException
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.bindSessVar(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.bindSessVar(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskPreTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.g.y(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Unknown Source).
    Can u please tell me what stpes i have to follow to solve this

  • Need help on how to create the simple mapping using ORACLE DATA INTEGRATOR

    Hi guys,
    am new to learn odi.. please share me or steps how to develop the simple mapping using ODI...

    Hi,
    I am a newbie to Oracle Data Integrator as well. You should have a look here first; http://www.business-intelligence-quotient.com/?p=379
    Try to play around with ODI and then come back if you have specific questions. You should better move to this ODI-forum; Data Integrator
    Good Luck,
    Daan Bakboord
    http://obibb.wordpress.com

  • I red that Oracle Data Integrator provides more than 100 KMs out-of-the-box

    I red that
    Oracle Data Integrator provides more than 100 KMs out-of-the-box.
    Is anybody have any idea how I can reach or view it or use it ?

    I got it its under <Oraclehome>oracledi>impexp

  • Generic Java for Oracle Data Integrator 10g (10.1.3.5.0)

    Hi,
    How can I install the Oracle Data Integrator Client in my MacBook. So the generic version should be the right one.
    But there are versions for windows, linux, solaris, HPUX and AIX.. but no generic java version.
    The version 10.1.3.4.0 has an generic version.
    How can I fix this issue, since I tried the linux version but doesn't install.
    Thanks.

    Hi,
    Install the 10.1.3.4 and make an "manual install" after that. It's means copy the oracledi directory over the old oracledi directory.
    There is detailed instruction on install manual...
    Did you already tried this?
    Cezar Santos
    [www.odiexperts.com]

  • "Oracle Data Integrator" with "Total Recall"

    Hi all,
    We are planning to use Oracle Data Integrator 11g for performing ELT in Oracle 11g database. We are also planning to enable the "total recall" (flashback) technology and house all our tables on it.
    Question I have in my mind right now is, will ODI and Total Recall work well together?
    Background
    Say we have an interface defined with the target data store defined on a tablespace with flashback enabled. Say there are 100 rows in the source, of which 10 rows violated the check constraint . The "bad" data, violating the constraint, will be moved to the E$ table while the rest of the 90 rows are loaded into the target.
    Questions*
    1) If our business rule dictates zero tolerance for errors and a ROLLBACK is issued, what will happen to the data in the E$ table?
    2) Say we have committed* the 90 rows and want to use a flashback transaction query to undo the changes, how will it affect the E$ table?
    3) Will the rows be deleted from the E$ table also along with rolling back of the changes in the target?
    4) If the errors in E$ are recycled and this interface is restarted after the rollback is performed, will the I$ table contain 110 rows i.e. source data + data from E$?
    5) How does ODI handle recycling / reprocessing of the violations in E$ table?
    Please advice.
    Thank you.
    CC

    1.) The data in E$ will remain there
    2.) The data in E$ will remain there
    3.) The data in E$ will remain there
    4.) 90 rows. The recycled will still error out
    5.) To me the recycling feature is pretty lame. You need to fix the errors in the E$ table and then recycle will load the data.

  • How to set oracle parameters

    Hi all,
    how to set oracle parameters in my sap 4.7 server. I need to know the procedure of parameter tune.
    Regards,.
    satish.
    Edited by: satish k on Jun 17, 2008 5:07 AM

    Hi
    Please try this link.
    http://oracle.basisconsultant.com/oracle_tuning_parameters.htm
    http://www.orafaq.com/wiki/Oracle_database_Performance_Tuning_FAQ
    But before doing this, check for all the probabilities as it requires lots of data and traces to do the parameter tuning.

  • ** Regarding Oracle Data Integrator Companion 11gR1(11.1.1.7.0)

    Hi Experts,
    I would like to Know regarding..
    Oracle Data Integrator Companion 11gR1 (11.1.1.7.0)
    Includes: Oracle Data Integrator Application Adapters for Hadoop, Oracle Applications, SAP ERP and BW (Hadoop is Newly added when compared with the older versions)
    Which i found in the oracle downloads link and so i want to know the below points
    1) What is the use of Oracle Data Integrator Companion 11gR1 (11.1.1.7.0)
    2) if it is something like an additional adapter tool to be installed to access, where and how we need to install.
    I would like to get the complete details and usage of this particular Oracle Data Integrator Companion 11gR1 (11.1.1.7.0).
    Request you to kindly guide me..
    Awaiting your inputs.
    Many Thanks,
    Pavan Kumar

    Hi Pavan,
    Oracle Data Integrator Companion 11gR1 (11.1.1.7.0) contains additional adapters for use with Hadoop, SAP etc which does not come with normal installation. However, you will need license for industry use of these adapters. This is especially good for a developer. However for server installs you must use one of the normal installers which additionally comes with Java EE agent capabilities which may not be the case with Companion.
    Speaking of Installation procedure, this works with a simple extraction of the zip file and does not come with an installer.
    Additionally, it comes with ODI Demo Environment with a local HSQL repository which can be used for training and learning purposes.
    Functionally, for a developer there is no difference between normal and companion install.
    Regards,
    Rickson Lewis

  • Oracle Data Integrator - Real Time Integration

    Hi,
    I want to know that, is there any possibility of integrating data in real-time using Oracle Data Integrator?
    If yes, does it affect the OLTP system performance? (Could it read from db logs,etc..)
    Thanks..

    Using ODI with Logminer-based CDC will affect performance on the source system more than using Oracle Goldengate, let me explain why:
    When using the ODI Logminer-based Journalisation the Logminer functionality will move the primary-key of the affected row into the journal table. When you are then ready to move the changed data, running an interface to move the data reads the Journal-view, which joins the journal table (primary keys) to the source data (and dealing with deleted rows), optimising out duplicate rows in order to bring across the then-current state of the data, which can then be loaded into the target system, on completion, the moved rows can be removed from the journal table. The data will appear in the journal table as soon as Logminer puts it there, which may be a lag of up to two minutes using asynchronous setting, whereas Synchronous Logminer applies "system triggers to the table, with the consequent overhead.
    With Oracle Goldengate, the comitted transactions are read from the log as soon as the log-writer puts the commit into the log. All the data is picked up from the log, at that point. It is then written to the trail-file system of Oracle Goldengate which can be propogated to multiple other systems potentially with sub-second latency, and minimal impact on the source system due to the efficient reading and writing mechanisms. One other consequence of using Oracle Goldengate is that you get every change of the data, not the optimised then-current state of the data when moved.
    Hope this explanation helps.

  • How to set the data fields column wide at sqlplus

    Dear Sir/Madam
    I would like to know how to set the data fields column wide at sqlplus
    Thanks
    Francis

    see
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch6.htm#sthref1131
    and the FORMAT clause of the COLUMN command in
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12013.htm#BACHCABF

  • ODI-1241: Oracle Data Integrator tool execution fails.

    Hi
    I'm getting the following error while running the OdiOSCommand command. I'm running dos2unix command to convert text files from dos to unix format.
    Application tier is on a different host to the ODI setup. Getting the following error. Please help resolve this issue.
    Error : ODI-1226: Step OdiOSCommand fails after 1 attempt(s).
    ODI-1241: Oracle Data Integrator tool execution fails.
    Caused By: com.sunopsis.dwg.function.SnpsFunctionBaseException: ODI-30038: OS command returned 1.

    The issue was with the value set for the OUTPUT_DIR variable. It was pointing to the wrong location.
    After setting it correctly the package completed successfully.
    Thanks for all your replies.
    To anwser your question. We are finding junk data and need to run the command to remove them from the input files which are coming from a different source.
    Edited by: user761125 on Jun 3, 2012 11:38 PM

  • Contacting OTN admins to get an older release of Oracle Data Integrator

    Hello everyone,
    We developed a product using Oracle Data Integrator (ODI) 10.1.3.3.1 but the current release is 10.1.3.4 and the older release cannot be found anywhere (OTN /SAC). So, i am trying to reach out to OTN admins to get access of ODI 10.1.3.3.1 so that we could ship that to customers. Does someone know how can i reach them or better yet if an OTN admin reads this thread, could you please respond?
    Thanks,
    Srini.

    You would need to contact the product manager about that.

Maybe you are looking for