How to set a different time increment in Calendar

Hi,
Trying to configure the calendar in the default calendar profile.
We are trying to set the calendar time increment to 10 minutes;
We have tried to set it up buy updating the following file:
$ORACLE_HOME/ocal/misc/eventcal.ini
Tried to set the following parameter:
TimeInc = 10
Changes are not applying to existing user calendars nor for new created users
Do I have to do other steps than those above?

Short answer: you can't - at least not directly.
What you're trying to do breaks the fundamental rules of IP routing - specifically you can only have one default route that's used for all non-local traffic. That route will either point out our ADSL link or your second WAN link. You cannot route by port or protocol.
Your best bet is to use an SMTP relay where you tell your server to relay all outgoing mail through an intermediate server (rather than directly to the destination domain). Then you can setup a static route to that relay over the second WAN link to override the default route.

Similar Messages

How to Set Automatic Default Time in Calendar

Friends,
When I create new event in calendar (by double clicking on a specific date) for example Group Dinner, the calendar autotatically set the start time at 8PM.
How to set the default time to 7PM for example.
Thanks
Regards,
akostaman

Ok It seems not just a problem of 24 hour time appointments that won't sync but all appointments I make on my iphone in calendar won't sync to calendar on my mac?

How to set up different ring tone for Facetime

how to set up different ring tone for Facetime

I don't think that on an iPhone that FaceTime has a separate setting, you can only set a ringtone (which will apply to phone calls) via Settings > Sounds, or set different tones for different contacts via the Contacts app - but you can't have a separate sound for FaceTime

How to set date and time on apple tv

how to set date and time on apple tv

Assuming this is not the first time you have used your Apple TV
    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router.
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

How to set cookie expire time

Hi I'm new to jsp,
please tell anybody, how to set cookie expire time.
I know about setMaxAge(); but my requirement is set the expire time until close the browser or logout.
And one more thing is how to delete cookies while logout.
Thanks in advance
achchayya.

Hey,
I understand what you are trying to say. solution is simple dont set setMaxAge , just create cookie and use it. It will be valid till you close the browser.
Regards,
SRI

How to set the expiry time of an image

how to set the expiry time of an image from within the servlet or jsp

I am sending an image with the page, so the set the page expiry in the browser cache we can use META tags of html or response.setDateHeader to set the Expires attribute, this setting the expiry time of the page but is not setting the expiry time of the image which is going with the page

How to set up the Time Capsule as an access point

Hi there,
I have home office and am having wifi-connectivity issues due to the layout of my home.
I'm getting the electrician to set up ethernet outlets in various rooms in my house so that I can get wired connections in several rooms. What I want to do is connect my Time Capsule to one of those ethernet ports (see the diagram below) so that I can still broadcast a wi-fi signal in my house while having wired connections elsewhere.
|->
Lan Port 1
Home Office (Laptop)
|
|->
Lan Port 2
Living Room (TV)
Modem
->
Wired Router
|
|->
Lan Port 3
2nd Bedroom (Xbox)
|
|->
Lan Port 4
Dining Room (Time Capsule)
In my research in how to set this up, I've come across documentation that shows how to convert an old Netgear/Linksys wifi router to an access point. Here's an example of the documentation I've run across: http://www.smallnetbuilder.com/wireless/wireless-basics/30338-how-to-convert-a-w ireless-router-into-an-access-point. What I haven't encountered is how to do this with a Time Capsule.
Here are my questions:
Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
Thanks a ton for any help or advice. It's much appreciated.

Excellent.. great to see people doing the job properly and wiring ethernet.
Here are my questions:
Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
Apple system is slightly different.. although the AP method would work the TC has a programmed state for placing it in AP mode.
And Apple even documented it.
http://support.apple.com/kb/HT4260
The difference in your system, is you are not using an Apple primary router (I presume) but otherwise the same.
Any router setup as WAP, you bridge the router part.. and you use Same wireless name.. same security setting (WPA2 Personal is WPA2 AES and the only one suitable). Same passkey..
I would add one difference to the apple insstructions.. they depend on auto wireless channels working. IMHO, auto anything in wireless is akin to voodoo black arts and has more to do with beads and rattles than science. It works fine in some case.. terrible in others.. lock it down. Set the wireless yourself.. at 2.4ghz there are only 3 non overlapping channels.. 1, 6, 11 .. if you use 300mbit N on the main router, it will use 2 of those channels.. choose the third for the TC.
Of course the TC can also use 5ghz.. and I lock it down as well but that is more my control freak nature.. and strong skeptism of anything auto in the wireless world.
I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
Your number auto changed.. fun isn't it when i edit it shows correctly but when I post it changes the format.
On the new setup the printer will still be available to all clients .. whether wireless or wired.
And to second part, yes, all file access is not going to change.. well I don't predict any.. IP of the system might change around but overall you are creating a single flat network. And that will work fine.

How to set a specific time zone for time channel in DIADEM

Hi,
I'd like to know how to autmatically set a specific time zone for time channels in DIADEM.
For example, I have stored data with corresponding time channel in UTC time on a disk which was collected in another time zone. Now I want to analyze this data and I want the time channel to show the local time in the time zone where the data was collected, and not the time in the local time zone where the computer is located.
The time channel should also take site local summer/winter time into account. Now I'm running a script that handles it for me which adds or subtract hours according to my input. The problem is that I'm handling data from several different time zones and I'm not located in any of them and when you're running a lot of data over a greater time period, it's easy to make mistakes, especially when it comes to summer/winter time. Is there a any clever solution to this already implemented in Diadem that I have not found?

Hi hj77,
No, I'm sorry, DIAdem has no time zone functionality at all. I'm afraid you have no choice in DIAdem but to keep running your scripts. Summer and Winter time are truly tricky, because the rules for when the changes occur are different in different countries and states within countries and also can change from year to year within the SAME country (as they did in the US a few years ago).
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to report with different time zone dynamically based on user's account?

Hello
I am wondering is there a way to change the report's date & time data based on user's locale setting in OBIEE?
Let's say the user log in to OBIEE with eastern time zone setting. The data that's in the database is storing a transaction of $400 at 1am Pacific time.
So when this user run a query which does something like 'select date, transaction, amount from date, transaction, sales where this = that', it should display the $400 amount done at 4am eastern time instead of 1am pst.
What I have done is to have data stores in date dimension to be UTC time, and I have also changed the data type of the date column to be 'local time zone'. DB is Oracle DB 11G now.
Now this query works perfectly well in the DB as long as I run the following commend first:
Alter session set time zone = 'whatever my time zone'
and then
Select date, transaction from tables..
The date displayed will automatically be converted into different time zone..
Since everything is working nicely from Oracle DB level, I need to know how to make it work when OBIEE sends the same query down to the DB..
I know that, probably I will have to enter the above alter session commend in the connection pool, however, I can't hardcode the time zone value.
I also don't want to store user's time zone in the user table because these users travels a lot. So even if his table setting is EST, but at a given day he can be traveling to pst time zone and view reports.
Is there a way to dynamically set the time zone based on user's account locale setting?
Let me know if you guys have implemented something similar or not
Thanks

garuda wrote:
Hello Sarvan
I have already done that part at the DB level and it is working perfectly with alter session commend before the query.
My question is, how do I configure OBIEE so that before each user runs a report from BI, the alter session commend will be fired with each user's personal locale time zone setting passed through so that each user will be able to view data according to their different time zone?did you tried with Connection scripts(Execute On connect) in Connection pool.write ur Alter commend to Change Time Zone in this script box.

How to set up different virtual LANs (using the E3200)?

Hi.
I would like to set up different virtual LANs (using the E3200) so that I can have two different networks that can't access each other.
The E3200 is connected to a modem for internet access.
I would like both networks to have access to the internet.
Does the E3200 alone support creating virtual LANs?
If not, is there another way I can meet the requirement using the E3200 alone (using something other than virtual LANs)?
I'm ultimately thinking that I would need at least one other router.
So for example,
Router A (E3200) is connected to the modem and setup for DHCP using a LAN IP range 192.168.1.1/24.
Router B is connected to Router A and setup for DHCP using a LAN IP range 192.168.2.1/24.
In this way devices connected to Router A should not have access to devices connected to Router B and visa-versa, correct? For example, Device X connected to Router A cannot ping or browse files on Device Y connected to Router B and visa-versa, correct?
Would I need to setup anything else on Router B? For example, do I need to setup DNS settings so that devices connected to Router B can connect to the internet without issue? Would I need to specify that these virtual LANs are not bridged, and on which router, or both?
I already know how to set up a static IP, DHCP, LAN IP ranges, and static DNS settings on a router, etc.
In regards to wireless devices, I am thinking they would follow the same pattern; so wireless devices connected to Router A (E3200) have access to other wired and wireless devices connected to Router A but not to wired or wireless devices connected to Router B and visa-versa. However, if wireless devices currently don't have access to wired devices also connected to Router A, then that is fine for now.
Thank you very much!
-Rami
Solved!
Go to Solution.

The E3200 has no VLAN support according to the manual. There's no way to configure two separate networks with this router alone.
You will need to add network electronics.
Ex:
Managed Switch with VLAN
Another wireless router with VLAN
If your modem supplies multiple public or private IP addresses then you could put a switch after the modem and two wireless routers attached to the switch.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Does anyone know how to set the starting time for an audio book?

I am trying to restart a burn in iTunes that failed for an audiobook. I need to set the start time so it will not have to reburn the disks that were already completed. I cannot find out how to do that in version 11 if the book consists of more than one file. Anyone have an idea how to do this? Apple wants me to pay $20 for something that should be in the help menu.

UCCX 5.0(2)SR02 is the version
I attached a screenshot of what I am trying to use but I am not sure what to put as the value? I tried using "now" and "null" but no success.

Simple question: How to set a different image to each side of a 3D cube?

Hi all,
I'm very new in the use of Java 3D and I would like to know how to set, in a 3D cube, for each side a different image.
Currently I've the code to set an image as texture of the cube, but it applies the same image to all the sides. However, I would like to use different images for each side.
This is my code: http://pastebin.com/sexBx57K
Any clue?
Thanks!

I think I worked it out.
I just have to set the JAXP parser
Q. How do I use a different JAXP compatible implementation?
The JAXP 1.1 API allows applications to plug in different JAXP compatible implementations of parsers or XSLT processors. For example, when an application wants to create a new JAXP DocumentBuilderFactory instance, it calls the staic method DocumentBuilderFactory.newInstance(). This causes a search for the name of a concrete subclass of DocumentBuilderFactory using the following order:
1. The value of a system property like javax.xml.parsers.DocumentBuilderFactory if it exists and is accessible.
2. The contents of the file $JAVA_HOME/jre/lib/jaxp.properties if it exists.
3. The Jar Service Provider discovery mechanism specified in the Jar File Specification. A jar file can have a resource (i.e. an embedded file) such as META-INF/services/javax.xml.parsers.DocumentBuilderFactory containing the name of the concrete class to instantiate.
4. The fallback platform default implementation.

How to set the interval time in the   JFormattedTextField? Pls Contribute..

Hi Frienz,
Hi have a following code in which i want set the interval time for the TextField by 15 min
So how it is possible please tell me out.
DateFormatter frmtr = new DateFormatter();
               SimpleDateFormat sdf = new SimpleDateFormat("HH:mm");
               frmtr.setFormat(sdf);
               frmtr.setAllowsInvalid(false);
               DefaultFormatterFactory factory = new DefaultFormatterFactory(frmtr, frmtr, frmtr);
               fmtToTime.setFormatterFactory(factory);

AFAIK there is no easy (pure java) way: either you exec something (depending on your paltform) or use native code. Appropriate privileges will be necessary.

How do you set the alert time to default to a set amount of time in the calendar?

How do you set a default alert time in my calendar so I don't have to set it every time?

Go iCal Preferences/General and click the default alert tick box at the bottom. You can then adjust the amount of minutes before the event for the alarm. NB. ticking the tickbox means you get an alarm for every entry.

How to set the exposure time and the gain of a connected camera with IMAQ USB

A camera was connected to my computer with USB port and we can acquire the image through IMAQ USB. Now we have to set separately the exposure time and the gain with the camera's driver software provided by the manufacturer. My question is: how to set directly the exposure time and the gain of this camera in Labview?

Hi Frank
Welcome to the forum. Have fun
FranklinT wrote:
My question is: how to set directly the exposure time and the gain of this camera in Labview?
I think its not possible for USB Cameras.
Previous threads for your ref
http://forums.ni.com/t5/Machine-Vision/How-to-control-property-nodes-for-USB-camera/td-p/970306
http://forums.ni.com/t5/Machine-Vision/imaq-USB-property-page/td-p/926034
Sasi.
Certified LabVIEW Associate Developer
If you can DREAM it, You can DO it - Walt Disney

How to set a different time increment in Calendar

Similar Messages

Maybe you are looking for